Ok, decided for the first time to try out Kies in an attempt to see if Froyo was available for me.
Well ffs, after 1hr I am for throwing the phone out of the nearest available window.
I am not a complete fool btw, as I previously owned windows phones and was a weekly flasher on XDA (in a rom sense and not a naked sense).
I have tried both methods described here:
http://forum.xda-developers.com/showthread.php?t=758212
and here
http://forum.xda-developers.com/showthread.php?t=758429
Neither work for me.
Kies just keeps trying to connect, but with no joy.
I am running the latest version of Kies, and am lost as to how to proceed.
Are there any other working methods to get this piece of s**t working?
All advice is welcome.
Are you running any sort of launcher like awd or Pro? If so you must disable it before you connect.
Sent from my GT-I9000 using XDA App
running launcher pro, however disabled it and was running TW whilst trying to connect to Kies (as per instructions).
set it to use TW (as you have done) then in Settings> About Phone> USB settings...select Kies
reboot the phone, wait for it to complete boot up. Have Kies started on the pc then plug the usb in
That should do it
Thanks for the replies, I tried this to the step and in Kies it just says:
Connecting the Device, please wait, and the bar keeps cycling back and forward.
Tbh, this is all I have ever got. *sigh*
Are you sure there is no application running in background blocking internal nor external sd card? Check all tasks, nothing should use sd cards, while trying to connect to Kies.
Sent from my GT-I9000 using Tapatalk
Hi Guys,
I had the same issue and I connected the usb cable to another usb port.
That pretty much solved it.
beside that I did disable LP+
Hope that helps
djglenn1337 said:
Thanks for the replies, I tried this to the step and in Kies it just says:
Connecting the Device, please wait, and the bar keeps cycling back and forward.
Tbh, this is all I have ever got. *sigh*
Click to expand...
Click to collapse
This is what works for me (on Windows 7 32-bit):
1. Select Kies USB mode on the phone, disable USB debugging
2. Exit all apps and stay on the TWLauncher Home Screen
3. Connect phone to the PC
4. Open Control Panel > Hardware > Device Manager and check if the 'GT-I9000' appears in the list under 'Portable Devices' without an error icon (that exclamation mark thingy)
5. If 'GT-I9000' does not appear AT ALL, try another USB port. Also see step 7.
6. If 'GT-I9000' appears but with an exclamation mark in Device Manager, right-click > uninstall > refresh. You might need to do this more than once.
7. If instead of 'GT-I9000', you see 'MTP Device', do an 'Update Driver' process and in the wizard manually select location as '\Windows\Inf'
8. Once GT-I9000 does appear correctly in Device Manager, start Kies - it should work.
PS: I don't have a Windows machine around right now, so apologies in advance if I got some of the nomenclature wrong in the above steps.
Why are u using kies. If u want to upgrade just use Odin like everyone else. Kies is a piece of **** that gives ppl brain tumors and murders puppies like itunes
Sent from my GT-I9000 using Tapatalk
It sounds like you have the long file name extension problem. Basically, there are files on your sd card with extensions longer then three characters and this is what prevents Kies from initialising.
Mount your sd cards as mass storage and do a search for *.* This should expose the offending files. Delete them and recollect to the PC with Kies.
Tried all of the above with no luck :-(
Phone shows up as GT-I9000 fine with no errors, removed external sd card, and unmounted internal sd card, etc, etc.
How do I use Odin? Does it invalidate my warranty? Sick of this Kies sh1t.
Here's what I did:
1. Uninstall kies
2. Clean up registry using ccleaner or similar registry cleaner (kies doesn't clean up after itself ) and remove all kies registry junk
3. Reinstall kies
4. Reconnect your g
Hopefully it should work for you because it did for me.
Goodluck
Sent from my GT-I9000 using XDA App
Also tried removing Kies, cleaning and reinstalling and allowing it to update. Still doesn't connect to my phone! What a piece of crap software! Is Froyo out yet on o2 uk or do I still have some time to figure this crap out?
Is it a win 7 64 issue? I could dual partician with xp?
Sent from my GT-I9000 using XDA App
Related
Well, I spent the last week or so having all sorts of creative fun with my new Captivate. Unfortunately, I was having the random shutdown issue, so I decided to remove SRE, SU, etc, using ODIN to restore my phone back to stock and get it exchanged for a new one.
I came home with my new phone today and proceeded to start the customization process all over. Before I did anything serious, I connected my new Captivate to my desktop, to both charge the battery and to sync with outlook using Kies.
With a full battery and my contacts loaded, I moved on the rooting and installing SRE. I then installed a bunch of apps, including ADW, ShopSavvy, and a bunch of games.
I then tried to get on the Market to download a few more apps. I forgot to 'emulate' T-Mobile to get around the AT&T censorship, so I fired up MarketAccess. I got an error message saying that MarketAccess couldn't get SU privs. That made no sense, since the phone was rooted, and SRE installed SuperUser. I downloaded the latest copy of Superuser and installed that. The SU problem was now fixed. (Turns out there was a glitch in the SRE I used. Designgears quickly fixed the zip file, but I was already using the glitchy one.)
Anyway, after loading a slew of apps/games, I plugged the phone back into the desktop to charge the battery some more. I got two error messages, one on the phone, and one on the desktop.
The phone complained that it was not on an 'idle' screen, since ADW was running. Since I had set ADW to be the default launcher, I used TitaniumBackup to temporarily uninstall ADW. (I couldn't figure out how to stop ADW and set TW back to the default.)
The desktop is more or a serious problem. I am now getting an info bubble saying that the USB DEVICE IS NOT RECOGNIZED.
The correct USB drivers are installed. I've used them to ODIN my previous phone back to stock. And they were working fine before I added SRE, ADW, etc.
I've uninstalled and reinstalled the drivers. Didn't help.
I tried USB Debugging, on and off. Didn't help.
I tried the age-old trick of unplugging the desktop and leaving it unplugged for 30 minutes. Didn't help.
So, here are my questions:
1) Does anyone know how to correct the DEVICE NOT RECOGNIZED error?
2) If not, is there anyway for me to restore the phone to stock without USB connectivity?
The phone still functions fine, just no USB. I was able to download the new SRE (with SuperUser fixed) using Dolphin browser. I then used My Files to rename and move the zip file to the root directory, and was able to install it fine. Is this same approach possible to restore to stock?
Thanks in advance...
Uninstall the usb drivers. Not sure what there called when kies installs it
fivebraids said:
Well, I spent the last week or so having all sorts of creative fun with my new Captivate. Unfortunately, I was having the random shutdown issue, so I decided to remove SRE, SU, etc, using ODIN to restore my phone back to stock and get it exchanged for a new one.
I came home with my new phone today and proceeded to start the customization process all over. Before I did anything serious, I connected my new Captivate to my desktop, to both charge the battery and to sync with outlook using Kies.
With a full battery and my contacts loaded, I moved on the rooting and installing SRE. I then installed a bunch of apps, including ADW, ShopSavvy, and a bunch of games.
I then tried to get on the Market to download a few more apps. I forgot to 'emulate' T-Mobile to get around the AT&T censorship, so I fired up MarketAccess. I got an error message saying that MarketAccess couldn't get SU privs. That made no sense, since the phone was rooted, and SRE installed SuperUser. I downloaded the latest copy of Superuser and installed that. The SU problem was now fixed. (Turns out there was a glitch in the SRE I used. Designgears quickly fixed the zip file, but I was already using the glitchy one.)
Anyway, after loading a slew of apps/games, I plugged the phone back into the desktop to charge the battery some more. I got two error messages, one on the phone, and one on the desktop.
The phone complained that it was not on an 'idle' screen, since ADW was running. Since I had set ADW to be the default launcher, I used TitaniumBackup to temporarily uninstall ADW. (I couldn't figure out how to stop ADW and set TW back to the default.)
The desktop is more or a serious problem. I am now getting an info bubble saying that the USB DEVICE IS NOT RECOGNIZED.
The correct USB drivers are installed. I've used them to ODIN my previous phone back to stock. And they were working fine before I added SRE, ADW, etc.
I've uninstalled and reinstalled the drivers. Didn't help.
I tried USB Debugging, on and off. Didn't help.
I tried the age-old trick of unplugging the desktop and leaving it unplugged for 30 minutes. Didn't help.
So, here are my questions:
1) Does anyone know how to correct the DEVICE NOT RECOGNIZED error?
2) If not, is there anyway for me to restore the phone to stock without USB connectivity?
The phone still functions fine, just no USB. I was able to download the new SRE (with SuperUser fixed) using Dolphin browser. I then used My Files to rename and move the zip file to the root directory, and was able to install it fine. Is this same approach possible to restore to stock?
Thanks in advance...
Click to expand...
Click to collapse
I had a similar problem and it turn out that Kies hosed up all my drivers...The only way I got it fix was by totally removing any trace of Kies and then uninstalled all my samsung drivers and usb drivers and then rebooted my pc. Then I reinstalled the samsung drivers and win 7 did the rest...
Well, I haven't uninstalled Kies yet. Although I have uninstalled and reinstalled the drivers from the ODIN thread. No difference.
I even uninstalled the ODIN referred drivers and tried the drivers directly from the Samsung site. Still no difference.
I'll go ahead and try uninstalling Kies and then the ODIN drivers, reinstall the ODIN drivers and see if that helps.
I've also ordered a new cable, since I've read a few threads on other forums where the problem was bad cables. I was going to go to AT&T and get a new cable, but they want $24.99. I just ordered a pair from Amazon at $3.99 each, with free shipping!!
Thanks...off to try ridding myself of Kies...
Well, deleting Kies (and associated drivers) didn't help!
After deleting Kies, I tried both the ODIN referenced drivers, as well as those from the Samsung site. Still not working!
I guess I'll wait on a new cable and see if that helps...
Okay, I think I'm in BIG TROUBLE here!!!
New cables arrived today, but they made no difference at all! Still getting the USB Device Not Recognized message. Doesn't matter if I plug the cable in while the phone is on and select any of the connection options (Kies, Mass Storage, etc.). It gives me the same message when I have Odin running and plug the phone in while holding the volume keys.
To further add to the problem, I tried installing the Odin referenced USB drivers on my wife's laptop which has never seen this phone or Kies. SAME PROBLEM!
I'm thinking there might actually be something wrong with the physical port on the phone. But this highlights my actual problem...
How can I return the phone (for the second time) when this phone has been rooted and is running SRE 1.2.1a ?!?!?
Apparently, there's no way for me to restore this thing to stock without USB.
Any ideas/suggestions?
Relax dude--I just got a captivate a few weeks ago, and have it working on tmobile.
For the drivers, when you plug your phone in, you're getting some errors. I know you uninstalled the drivers, but to double-check, open up device manager and see if there are any ! marks for the phone. Right-click and uninstall the entries. Also, you might try using a different USB port. I can only get my phone to connect using one of the 6 usb ports i've tried. Finally, and I don't know if these are the drivers for Odin, but I downloaded these drivers: SGH-i897_Captivate_USB_Drivers_5_02_0_2
When the phone connects, you might want to go to device manager, find the device(s), righ-click and and select 'update driver'. then, in the driver update window, pick 'manual' or 'let me specify location' and navigate to the unzipped SGH-i897_Captivate_USB_Drivers_5_02_0_2 file. Then, it should work.
Like I said, I have no idea if those are the drivers for odin...but I'm about to find out
I'd like to relax, but I think I'm dealing with a phone with a bad usb port...and since I've rooted, SRE'ed, etc., I won't be able to return it.
Anyway...
The driver you're using is the 'direct from Samsung' version, not the one for Odin.
Regardless, I've been through the exercise you propose...both with the Samsung and Odin drivers. When you attempt to manually install drivers, you need to point the installer to the ".inf" setup information file to use. The Samsung driver has three: SSADADB2.inf, SSADBUS.inf, and SSADMDM2.inf.
I get the following message when trying to use any of these three setup files:
The specified location does not contain information about your hardware.
Oh, and I've tried several different USB ports on the computer...both on my external hub and directly into the back of the machine.
Thanks for the suggestions, but still not working...
I'm really thinking I have a bad port on the phone...especially since trying the connection on my wife's laptop produces the exact same error.
Dam...
Still trying to find a way to restore the phone to stock without a USB connection...
i also have this "DEVICE NOT RECOGNIZED" on my sony x1.
Drivers
I was having trouble using the USB drivers from Samsung the one's you were using SGH-i897_Captivate_USB_Drivers_5_02_0_2. The computer didn't recognize the phone. If you havn't tryed these already give these a try. Well since I am new I can't post the url. Put these words together (forum.xda-developers com archive index.php t-730638)
superdog404 said:
I was having trouble using the USB drivers from Samsung the one's you were using SGH-i897_Captivate_USB_Drivers_5_02_0_2. The computer didn't recognize the phone. If you havn't tryed these already give these a try. Well since I am new I can't post the url. Put these words together (forum.xda-developers com archive index.php t-730638)
Click to expand...
Click to collapse
Not sure different USB drivers would help, but I went to the thread you show and tried to download the 32bit drivers. This is what I get:
{"error": "Invalid access attempt for this token"}
Oh well, thanks anyway.
I'm still thinking that the problem is hardware on the phone. I've tried four different cables, and three different computers. All show same problem of DEVICE NOT RECOGNIZED.
Still trying to figure out how to restore to stock without USB connection for ODIN so I can exchange for a new phone...
What are your USB settings on the device? Do you have debug mode enabled or maybe you've set the device to connect to kies right away which is producing errors on your PC. What versions of windows have you been trying to connect to? This sounds like a windows problem more than anything else.
No modifications, same error
I didn't make any modifications to my new AT&T Captivate, and I too am getting USB Device not recognized under any of the following conditions:
- drivers installed, no Kies
- drivers installed after Kies
- Kies installed after drivers
No response to any USB connection mode (Kies, mass storage, media player, PC INternet).
Only way to exchange files is to physically remove the SD card and plug it into my PC. Windows XP Professional.
By the way, which of the three drivers is the correct one: ssadadb2.inf, ssadbus.inf, or ssadmdm2.inf? Pardon my ignorance as to how this is supposed to work.
mukherji said:
I didn't make any modifications to my new AT&T Captivate, and I too am getting USB Device not recognized under any of the following conditions:
- drivers installed, no Kies
- drivers installed after Kies
- Kies installed after drivers
No response to any USB connection mode (Kies, mass storage, media player, PC INternet).
Only way to exchange files is to physically remove the SD card and plug it into my PC. Windows XP Professional.
By the way, which of the three drivers is the correct one: ssadadb2.inf, ssadbus.inf, or ssadmdm2.inf? Pardon my ignorance as to how this is supposed to work.
Click to expand...
Click to collapse
You should return your phone if it's new if you can't get your computer to recognize it when you have the correct settings and drivers.
Choose, mass storage. I use the drivers from ODIN, I also have to ones from Samsung's site but they are for Windows 7 64bit. Before you plug any Captivate into a PC for the first time you need to first change the settings to USB Mass storage or Kies will attemp to download drivers. Once you get your phone to mass storage windows should find the drivers. I am not sure, I am running Windows 7, I have an old desktop that runs XP, I could plug my phone in and check for you.
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Rhiannon224 said:
You should return your phone if it's new if you can't get your computer to recognize it when you have the correct settings and drivers.
Choose, mass storage. I use the drivers from ODIN, I also have to ones from Samsung's site but they are for Windows 7 64bit. Before you plug any Captivate into a PC for the first time you need to first change the settings to USB Mass storage or Kies will attemp to download drivers. Once you get your phone to mass storage windows should find the drivers. I am not sure, I am running Windows 7, I have an old desktop that runs XP, I could plug my phone in and check for you.
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Click to expand...
Click to collapse
The 2 folders I found that have the drivers are /program files/android/, .... and /program files/samsung. Delete these subfolders that have drivers in them.
Download this : http://www.megaupload.com/?d=N4GC49JL and unzip. In the folders inside (i386 and amd) there are uninstallers. Run whichever version is appropriate for you. If you have no drivers or it doesn't say to reboot, the main folder has a setup program. Run that to install the proper drivers. When you plug in to usb, it will now find these drivers.
Also, for me, ONLY the REAR usb ports work properly with this. Top, front, and ext hub ALL give issues.....
JayPhill89 said:
What are your USB settings on the device? Do you have debug mode enabled or maybe you've set the device to connect to kies right away which is producing errors on your PC. What versions of windows have you been trying to connect to? This sounds like a windows problem more than anything else.
Click to expand...
Click to collapse
USB is set to Ask on connection
Debug off or on makes no difference
All tests have been done on XP machines (3 different ones)
I'm all but positive this is hardware...
Thanks for trying to help!
Rhiannon224 said:
<snip>
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Click to expand...
Click to collapse
I haven't tried ADB, but I'm not understanding how ADB would be able to connect when the connection to the computer is failing at the driver level. I guess I can give it a try tomorrow.
Thanks for trying to help!
What would REALLY help me is for someone to post a backup taken of a completely stock (ODIN'ed) phone using ROM manager. I'm thinking I could load that on the phone and then be able to return it for a new phone!
Any volunteers...please?
techmik67 said:
The 2 folders I found that have the drivers are /program files/android/, .... and /program files/samsung. Delete these subfolders that have drivers in them.
Download this : http://www.megaupload.com/?d=N4GC49JL and unzip. In the folders inside (i386 and amd) there are uninstallers. Run whichever version is appropriate for you. If you have no drivers or it doesn't say to reboot, the main folder has a setup program. Run that to install the proper drivers. When you plug in to usb, it will now find these drivers.
Also, for me, ONLY the REAR usb ports work properly with this. Top, front, and ext hub ALL give issues.....
Click to expand...
Click to collapse
Big thanks!
Just got my first Android device a couple hours ago (went from ATT Bold to Captivate), and could not get the phone to mount to my PC.... followed your instructions here and BAM! Perfect-o! I have now rooted....
OK, not sure where to go next... was thinking about just getting a new ROM flashed since I am totally stock at this point.... the fun begins!!!
jaxf250 said:
Big thanks!
Just got my first Android device a couple hours ago (went from ATT Bold to Captivate), and could not get the phone to mount to my PC.... followed your instructions here and BAM! Perfect-o! I have now rooted....
OK, not sure where to go next... was thinking about just getting a new ROM flashed since I am totally stock at this point.... the fun begins!!!
Click to expand...
Click to collapse
Great!! Glad it all worked for you. My next advice is, before adding anything READ A LOT!!! =) Decide what you want from the descriptions and issues you will see in the threads....
Happy modding!!
I didn't see, I just skimmed through bit did you try to put the phone in download mode and see if windows sees that (different drivers come in to play in download mode and none of the touch wiz stuff is running)? it would test the idea of a bad port.
then you can still always install linux and use adw from there, linux and macs don't need drivers. if that doesn't work, put insurance on the phone if you haven't already then drop it in the sink and get another one.
also I think although I don't know but I think adw may have something to do with it. and incorrectly uninstalling it. first put the phone in download mode then you can work from there on ways to fix that.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Ok, I've given up trying to get this to work. I'm 100% convinced this is a hardware problem with the phone!
I had another thread going, looking for a way to restore this phone (remove SRE, SU, etc.) without usb/ODIN so I could return it to AT&T. I've figured out how to restore it to stock and will be heading to AT&T in the morning.
Thanks to everyone for their patience and assistance!
Hi,
I had earlier opened a thread regarding this issue. But that was having more than one query and was misleading.
I need to install Froyo JP6 (the official one - no custom ROMs). Currently I'm having JF3.
Kies is not working for me (The MTP application in the mobile opens up, but gets restarted while getting connected to kies, so kies is not recognizing my mobile).
How shall I install JP6 without Kies?
Is it possible to install from mobile itself? (like installing apk file?)
nandihno had told me to install using odin. But i couldn't find it in dev section. Can anybody provide me the link for odin foryo JP6?
Thanks in advance!
Install latest version of Kies - 1.5.3.10093_82.
You can go in setting and Upgrage..
Once the latest version is installed, go into Program Files - Samsung
Delete USD Drivers directory here.
Now go in Program Files - Samsung - Kies - USB Driver
Install the drivers from here.
Once the installation is complete, go to settings in SGS (Galaxy) and unmount Internal SD card.
Connect SGS using USB Key and wait till system detects your SGS.
Once it is done you can use Kies to upgrade to Froyo... However as of today Froyo is not out for India... though there are work around to fool Kies and still download, though I will suggest to wait...
thanks I will try this as well. Well this also work with my issue? I tried to upgrade my firmware using kies, but it failed because of some file missing. I installed kites again, and now it detects my phone when I connect it, but it never seems to make the connection
It just says that it is trying to connect and this goes on forever.
So now I cannot repair my firmware using kies. Can this solution help with that as well?
Shurdus said:
thanks I will try this as well. Well this also work with my issue? I tried to upgrade my firmware using kies, but it failed because of some file missing. I installed kites again, and now it detects my phone when I connect it, but it never seems to make the connection
It just says that it is trying to connect and this goes on forever.
So now I cannot repair my firmware using kies. Can this solution help with that as well?
Click to expand...
Click to collapse
Same problem here. It detects my phone. But freezes in "connecting your device".
@shurdus - when this is happening (connecting ur device), did you notice your phone restarting the MTP application.
I mean, the MTP application will be displaying "installing kies" but after some time, it disappears and appears again in a fraction of a second..
I have to try the solution said by satyawali.
Another doubt - unmounting internal SD card will affect the data?
emmarbee said:
@shurdus - when this is happening (connecting ur device), did you notice your phone restarting the MTP application.
I mean, the MTP application will be displaying "installing kies" but after some time, it disappears and appears again in a fraction of a second..
Click to expand...
Click to collapse
I have a similar problem. I just downloaded the newest version of Kies, but can't get Windows/Kies to recognize my phone. I unchecked "Automatically start monitoring for device..." and "Start Kies automatically..." in the Settings box, and I did the Driver Recovery and rebooted, all recommended in another thread. Still nothing. All I get is some very quick flashing of MTP Application and my home screen opening and closing. Then Windows (Win 7, 32 bit) tells me it couldn't do something and to contact the device manufacturer.
Have you found a solution?
Sent from my GT-I9000 using XDA App
SlowRain said:
I have a similar problem. I just downloaded the newest version of Kies, but can't get Windows/Kies to recognize my phone. I unchecked "Automatically start monitoring for device..." and "Start Kies automatically..." in the Settings box, and I did the Driver Recovery and rebooted, all recommended in another thread. Still nothing. All I get is some very quick flashing of MTP Application and my home screen opening and closing. Then Windows (Win 7, 32 bit) tells me it couldn't do something and to contact the device manufacturer.
Have you found a solution?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I haven't found the solution yet.
I guess the only solution is to format the SD card and then try. But I'm not willing to do that So no froyo for me... If only there was an OTA or froyo installer it'd be great
1. Uninstall KIES
2. Uninstall "SAMSUNG USB Driver For Mobile Phones".
3. Reboot your PC
4. Brows to "Program Files" (windows 32bit) or "Program Files (x86)"(windows 64bit) and remove the folder "Samsung".
5. Run "regedit" from Command Prompt and look in HKEY_CURRENT_USER\Software and delete the "Samsung" folder.
6. Right click your C-drive and choose "Properties", click "Disk Cleanup" and check "Temporary Files" and hit "OK".
7. Install KIES and reboot your PC.
8. When booted, don't start KIES yet, just connect the phone and let windows install the drivers for it, unplug the device when done, start KIES and connect the phone.
That should work out for you..
^ thanks. gonna try it now. Will let u know
@[Ramad] - even this didn't work.
The problem is in the phone - i can clearly see it. I guess, a factory reset will do it. Is there any backup software that can backup including the application data/caches ?
isn't there a download link for the new and original Froyo? there are too many pages and it's quite hard to find what you want (I've found Froyo but not the original one, I think, and I've found plenty of advices for kies but I don't want to do all that unistall-delete traces-install again, when there's a simpler way with odin)
Kies problem is related to the ammound of MP3's on your SGS!
Because MTP is a MP3 player connection protocol it's using some MTP Windows media player driver to connect. If you have all MP3 on an external SD card, just remove it and Kies will work fine. Otherwise remove or rename your MP3s to make it work.
Seriously this worked for me, credits to a user of some forum (can't find the post).
Force close all d launchers before connecting d phone to kies its very necessary step hope it will work
It's unbelievable... the best Android phone has the crappiest PC companion. Seems everyone has exactly the same problem with kies.
As far as I've read it's related to files with longer names stored inside the internal memory. Come on! The old Palm Hotsync didn't suffer from such stupid things!
I think we should start a global petition for Samsung to fix that. My wife has a 10 bucks nokia that has a far leaner/better/functional PC companion.
@nagash1979 - by saying remove it - u mean "all mp3/flac and media" in the external card?
@ srajoria - did that. In fact. uninstalled laucnher pro and then tried. no use.
@c3p9 - i don't think its a deal breaker for this phone. As there are alternatives for kies (like es file explorer for wireless transmission of files). But if only there was an OTA update, then no need of kies at all
@nagash1979 - i couldn't find any windows media player application running in the background. thanks anyway....
Finally I got the solution for the KIES problem.
I had recently downloaded winamp beta from android market. And when connected the phone in usb storage mode when winamp was open in PC and phone, my phone was detected as mass storage. And when I opened Kies, it also detected my phone (finally!), but asked me to connect to kies mode. I removed the cable and connected again in kies mode. And it worked like a charm! WOW!
But it's not working everytime!
Edit: The Mass Storage worked 4/10 times. Kies worked only once out of 10 tries. Everytime a alert message to turn off the SD card is popping up which is very irritating. Dunno how to fix that....
Atleast I was able to connect my phone with the PC using USB Mass Storage mode after a very long time - took the backup of all camera files
If you have latest version of Kies installed and drivers working and experiancing MTP crashing issue on phone then it is long file name issue.
To solve this, connect your phone in media mode and mount the card on system. Use attached utility and search long file names on phone and delete them.
Now connect Kies you should not get MTP issues.....
However this does mean this crappy software (Kies) will still detect your phone...
Try to use Antroid Manager will be satiafied. I have uaed it works fine over Wifi.
Sent from my GT-I9000 using XDA App
Hi Guys,
I have read all the threads and fixed for Kies but i am still stuck in a tricky situation. So far i have removed all files with extension greater than 16. Then formatted SD card to be sure.
Driver Recovery done through Kies, then rebooted the phone and connected it but still no go. Also i don't have any lagfix or different HomeScreen installed. It used to connect fine earlier but one fine day it just stopped working.
OS : Windows 7 64bit
Kies : Latest version 1.5.3.10103_100
The MTP Application on phone shows connected but the KIES keeps on connecting to the phone
Uploaded with ImageShack.us
The exact same thing keeps happening to me too. I just take the cable out and reconnect it immediately. Seems to work for me.
Sent from my GT-I9000 using XDA App
^^ Doesn't work for me
If i remove the cable and try to connect again then i get those MTP crashes. After that i have to remove drivers and restart the phone.
I have exact same problem.I fixed MTP loop issue,phone seems to be connected but kies still search for device. If i unmount internal sd,phone is stuck in mtp loop again. Odin is probably the only option,but dont want to lost garantee.
Sent from my GT-I9000
I am in the same boat
As last resort i will try wiping off all the data if nobody can come up with a solution for this.
I have also tried that (wipe,format SD) but without success...
Sent from my GT-I9000
Two things:
First, make sure your USB settings are set to Samsung Kies and not to "Ask on Connection" or anything else...
Second, I plug in my phone... wait for the PC to detect it, THEN launch Kies... don't open Kies until your PC detects the phone (you can verify by seeing if it shows up in File Explorer)
There is a bug with the MTP Application on our phones... going to be posting a thread about it shortly.
^^ Thanx for the help...
But this tip also didn't work out for me
My PC detected the phone just fine, but when i open KIES it never changes from the Connecting status
I've tried these tips:
-let Windows (7 32b) download all drivers
-reinstall Kies (5 times)
-manually install MTP drivers
-delete all files longer 16 characters (on both SDs)
-WIPE Phone and format both SDs
-Reinstall Kies drivers (automatically in left upper menu bar)
-connect usb and choose other connection like "mass storage" (after that kies recognize connection what is strangest thing)
-try 3 versions of KIES
...still same result.
Yup I know how all of you are feeling, I have the same problems too.
KIES really is nothing but a pain in the @SS!!
Just to add to the fixes that i have tried.
- Changed com port from 9 to 12 of GT-I9000 Device - Didn't Help
- Tried Connecting from 4 different USB Ports - Didn't help
Version of MTP Drives for windows 7 64-bit is (6.1.7600.16385) 6/21/2006 , can someone please confirm if this is the latest thing ? Also for those using windows 64-bit, if KIES is working then what is the driver version and date ?
Just loaded windows once again. Installed Kies and then updated Kies to the latest version. The version for use drivers it shows is 1.3.950.0. Before re installing windows I had 1.3.450.0 which I had downloaded from xda. Do you have winamp installed. Try removing it. I had a problem with it.
Sent from my GT-I9000 using XDA App
Unmount external. Format internal and mount internal. Than try it.
Sent from my GT-I9000 using XDA App
@david : I have already tried that, it didnt work . Thanx for the suggestion though
@fulcrum : Going to check drivers, will report back.
I feel your pain. I got it to work and did the upgrade. It worked great except it was 2.1 update-1 and it was that after. However, the phone works better. Go figure.
Sent from my GT-I9000 using XDA App
try this fix.
1)remove any external memory card
2)on your phone, navigate to the DCIM folder, and there should be a thumbnail folder.
3)delete all the thumbnail. files. they should have a white background.
4)connect to kies
@hennes : thanx for the suggestion m8 , we have already tried that ( its the 16 char limit thingy) .
Today i am going to reinstall my Windows 7- 64bit. If it doesn't work this time then i am going to abuse the chimps @ samsung FB page.
abhishek.vij said:
@hennes : thanx for the suggestion m8 , we have already tried that ( its the 16 bit thingy) .
Today i am going to reinstall my Windows 7- 64bit. If it doesn't work this time then i am going to abuse the chimps @ samsung FB page.
Click to expand...
Click to collapse
I like your spirit Abhishek. Have given them a piece of my mind too. Guess these guys on fb themselves don't know what's going on. Must be a guy just sitting on a pc and replying.
Sent from my GT-I9000 using XDA App
abhishek.vij said:
@hennes : thanx for the suggestion m8 , we have already tried that ( its the 16 char limit thingy) .
Today i am going to reinstall my Windows 7- 64bit. If it doesn't work this time then i am going to abuse the chimps @ samsung FB page.
Click to expand...
Click to collapse
@Abhishek...I had the exact same problem.
I tried this method and it worked:
1. Go to Device manager.
2. You'll most probably see a problematic device --> GT-I9000.
3. Uninstall drivers for that device while your phone is connected to the PC.
4. Disconnect your phone and reconnect it in Kies mode.
5. Let windows search for the drivers and install them.
Once the installation completes successfully, your phone will be detected by Kies.
In case windows is unable to find the updated drivers, try installing them manually.
Hope this helps...
Abhisnek: I deside to put FroYo to my device trough odin and it works great.Im running on Doc FroYo right now.Result in quadrant are more than 200 points higer and it fixed many issues. If your phone have recovery than i recomend you do that too.I dont need kies any more.
Sent from my GT-I9000
Hi everyone,
I have an AT&T Captivate SGH-i897 (2nd hand) and i can't mount the phone to my laptop (winXP 32bit). When i plug in the cable to the phone and then the PC i get the "device not recognized".I've donwloaded the Samsung drivers from the xda wiki page and extracted them and tried to update the driveres via Device Mng ,but didn't work.Also dl'ed the Samsung drivers 5.0.x instaled ,and still nothing.USB Debugging is on...
So to recap,my top can't recognize the phone('s internal sd card) so plz help ???????
Try this, go into usb settings and choose "mass storage"
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
install kies
I would also recommend trying to fully uninstall all the drivers that associated on your pc with your phone (samsung or otherwise), and then reinstall the drivers before you plug in your phone. Then try to reconnect.
Just covering the basics. Assuming your phone is working correctly.
You have tried multiple USB ports on your computer, particularly those on the back if it's a desktop.
You have installed correct drivers (x86 or x64)
" for the correct operating system.
You have uninstalled the drivers before trying to reinstall.
You've tried to get Windows/ Mac to find them online (assuming you're using versions of OS that support doing that)
You've first tried Kies mini before full version, uninstalling in between. (Kies full version isn't supported for US, there are workarounds, but that's a different discussion)
On the phone you tell the phone to connect 'USB storage' (from the pull down menu after connected or in the settings)
I too am having problems with USB connectivity on a notebook with Win7/64. The usual failure mode is Windows not recognizing the USB device. I have followed ZBigT's basics, step by step and still cannot connect.
FWIW, my registry is awash with Samsung entries, some of which cannot be deleted.
I've even tried the AIO Toolbox application (to install the 64 bit drivers) to no avail.
Any other tips?
Is usb debugging turned off?
o hey guys sry for keeping u waiting,
i menaged to install ginger ,
the problem was my lap....rusty old bucket!!!!
had my friend come over with his lap and it worked like a charm ,
the problem is now i need a new one ;(,
damn
mrhaley30705 said:
Is usb debugging turned off?
Click to expand...
Click to collapse
Yes. Still no love. Have tried:
usb_drivers_GalaxyS_x64
SGH-i897_Captivate_USB_Drivers_5_02_0_2
mini-KIES
Kies
AIO
uninstalling reinstalling each time
When I plug in the Captivate, any of 3 USB ports on the laptop, Windows gives the "Unrecognized Device..." message.
Go to settings/about phone. Look at the very bottom to see what rom you are running.
mrhaley30705 said:
Go to settings/about phone. Look at the very bottom to see what rom you are running.
Click to expand...
Click to collapse
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
mabovalu said:
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
Click to expand...
Click to collapse
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
mrhaley30705 said:
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
Click to expand...
Click to collapse
Thanks for sticking with this. I was able to connect. I as focused on the Registry remnants, but your advice to clear out the Samsung folder in Programs worked. Thank you.
Additional comments: I am now running the Dlev ROM, it's OK, but when I plugged in the USB cable, just to the phone, it launched the Alarm Clock app! So I deleted that.
Then on the first of my four USB ports I got a USB driver failure to install, then the Windows Unrecognized USB device on ports 2 & 3. On port 4 it worked. (This is a Lennovo/Thinkpad notebook.)
I used the usb_drivers_GalaxyS_x64 package as that also worked on my desktop.
Thank you very much.
I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Raistlin1158 said:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Click to expand...
Click to collapse
Thanks for the quick reply.I did that and it was set to mtp + adb...
When I then connected it it tried installing the driver and I got..
Driver device software was not installed.
Please consult with your device manufacturer for assistance getting this device installed
MTP USB Device X Failed
I tried updating the MTP drivers again from device manager but this time got
Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
SAMSUNG Mobile MPT Device
This device cannot start (code 10)
From what I'm reading it's a computer error not the phone. Can anyone suggest a new set of drivers to download (that doesnt involve Kies) as I've had issues with picking up harmful software from random sites when I've been struggling to find drivers.
I tried using the suggestion at the bottom of here r.e.Portable Devices and deleting the Upperfilters string Link but also to no avail.
Oh, and yes I've tried different ports and cables.
Well that's me done for the evening! I've tried everything mentioned in this thread including updating java and windows media player and all the afformentioned stuff but still no dice.
Could it be the actual drivers or a random windows 7 setting that I haven't yet tweaked since my clean install of windows??
http://d-h.st/YpV
Here are the correct drivers, install then reboot your pc.
Raistlin1158 said:
Go here for drivers.
---------- Post added at 01:00 AM ---------- Previous post was at 12:57 AM ----------
http://d-h.st/YpV
Here sre the correct drivers, install then reboot your pc.
Click to expand...
Click to collapse
Sorry,I know I'm tired but I can't see a link on your post...
Highlighted in red
The newer drivers don't really wwork with the 9305 so find some older drivers. That works for me
Sent from my GT-I9305 using xda app-developers app
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
woldranger said:
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
Click to expand...
Click to collapse
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
Cheers, yeah, I was going to try them but I wasn't at my pc at the time I wrote that. I've downloaded the exe package but now it seems there are still drivers to uninstall - I uninstalled the drivers through device manager and went into my C drive and removed the SAMSUNG folder with the USB drivers in it. I'll restart the pc and hope that helps with the removal....
woldranger said:
I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Click to expand...
Click to collapse
Having the same problem. but I am on 4.3 rom using carbon rom a few days then transferred to pac man rom. My cellphone is not detected in my computer but it is being detected in the safely remove usb options. I tried to use a usb otg cable and a flash disk. No notification is seen on my phone but I can access the files on the flash disk (using usb otg cable) in the file manager. Tried the *#7284# but error occurs and says connection problem or invalid MMI code. I found that MTP udb device says failed
Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
woldranger said:
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
Click to expand...
Click to collapse
Just got the same problem. But my problem is already solved. Just flash a new rom. In my instance, I flash ripper rom