H guys need some help. Just update my Galaxy S with both JM7 and then with JM8. I updated from my original Norwegian firmware I9000XWJFB/I9000SWCI9000XEEJG1/I9000XXJF5/I9000XWJFB. Problem is after the update I have only wifi connections. I am unable to get any 3G or Edge or any sort of mobile internet connection. I can still phone out etc. Just no mobile internet. I have tried flashing back to JF5, but I get some russian language and still no 3g. Any help would be appreciated.
I have also added Tayutama_Edition_Voodoo_Full_v1.1. But even without it still no 3G.
Currently : PDA:XWJM8 Phone: I9000XXJM4 CSC: OXAJM1 Not sure what that means.
I am in Norway if anyone knows of a firmware I can downgrade to or use in this region. Did not backup my original firmware.
Sounds like you need to set up your apn.
Sent from my GT-I9000 using XDA App
Google for your network providers APN codes, and then set them in settings.
Thanks guys got it working...reflashed the csc file with xee jm1. It worked. Man was I getting worried.
Sent from my GT-I9000 using XDA App
no 3g connection after upgrading to gingerbread for galaxy tab
Dont have 3g connection when i updated my tab from froyo to ginger
My network is singtel from singapore
please help me
email me asap thank you very much
Hey guys, first time poster here but been lurking for a while. Need to say a big thanks for all the great work going on here.
Some background before getting to my questions:
I bought my phone while travelling on business in Sri Lanka, I believe the phone is an Indian version. The firmware it is running is DDJG4 (not sure what other info I should be including here). I am heading back to the UK next week and want to upgrade to the latest official Froyo, preferably a EU/UK version.
So, my question(s) are:
1) What version should I be looking? I have had a look around the forums and it seems the XEU variant is what I need, is this correct?
2) I have also seen that I may need to take modem firmware (?) or other regional hardware config issues into consideration when changing firmware region, what's the story with this?
3) I have been thinking about using Kies to upgrade to the latest XEU firmware using the registry hacks (ie changing the ProductCode and HIDSWVER). While I am tech savvy and have looked at the appropriate threads about using odin etc to upgrade, but honestly I don't have time for that kind of thing anymore. My question regarding Kies is: obviously I would put XEU as the ProductCode, but what would I need to put as the HIDSWVER?
Thanks
can anyone shed some light?
I have a i9000m that was originally with bell. I've played with tons of roms but would like to go to original stock and allow kies to update. I'm no longer with bell... I am now with Virgin (canada) and would like to find the original (or close to it) virgin rom and have kies update it. I've searched and searched and cannot find it here. I'm sure I've just overlooked it. If somebody could point me in the right direction I would greatly appreciate it.
Hi joedirt7 try here..
sammobile.com
but.. i'm on Fido in Montreal and 4 best reception ( better than the original) use a rom ICS or JB with radio KCF1 or KJ1 ( cause with this radio, desappear the R of roaming )
bye
Here's the Bell stock ROM...scroll down a ways
http://forum.xda-developers.com/showthread.php?t=1102881
Thanks... I checked those pages too... was a late night i guess. Thanks again.
Hey guys I'm new to rooting devices and got one about a month ago mine is a Samsung galaxy s3 GT-1903T on Telstra 4G. I have done a lot of searching over the web and have only found one thing, the Samsung galaxy s3 toolkit but I don't know if it works for my phone so if anyone could help a noob out that would be really great thanks
80 views still no reply please someone
Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2
apsmiles said:
Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
But can u at least answer this for me is the GT 19305T the same as I9305? If so i already have toolkit but the first thing asks me for my build which could be 11,12,13,14. idk which one cant find the last letters in system info
Yes the "T" in the name is just the Telstra branding, if you follow ausdims rooting thread you will be fine
Sent from my GT-I9305 using Tapatalk 2
apsmiles said:
Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
apsmiles said:
Yes the "T" in the name is just the Telstra branding, if you follow ausdims rooting thread you will be fine
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Thank you
The 'T' in the model number isn't branding. The phone is actually slightly different.
I have a friend who works for Telecom here in NZ and they also sell the I9305T.
He said it is optimised for use on Telecom's network (and obviously Telstra's too) it uses different modems and the antenna is different inside the phone.
They do however use the same ROMs and firmware. Anything intended for the I9305 will also work the same on the I9305T, except modems.
Sent from my GT-I9305 using xda app-developers app
Obagleyfreer said:
The 'T' in the model number isn't branding. The phone is actually slightly different.
I have a friend who works for Telecom here in NZ and they also sell the I9305T.
He said it is optimised for use on Telecom's network (and obviously Telstra's too) it uses different modems and the antenna is different inside the phone.
They do however use the same ROMs and firmware. Anything intended for the I9305 will also work the same on the I9305T, except modems.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Hi all,
I have a question about rooting, i followed the ausdim rooting guide and installed triangleaway but system still shows modified. Anyway, Is there a ways not to use CWM recovery and use stock recovery? how can i flash stock recovery and keep root? and if i want to update to 4.1.2, can i do OTA without losing root? Thanking you in advance
Jro03c.i9305xxalk5
Hello everyone!
New to this forum and new to Android phone. I have searched the whole forum and read through the dev-sections. Also did searches on multiple sites and through searchengines to find out what device model to use in the ToolKit...didn't find any confirming answer to my question.
As I have no posts from before, I couldn't write this in the dev-section, so I chose the thread that was closest to what I was looking for.
Question: What is the correct device model to choose in the ToolKit (I have version 7.0.0).
Information from my "about section"...
Phone: Samsung Galaxy SIII 4G
Model: GT-I9305
Android-version: 4.1.1
Build: JRO03C.I9305XXALK5
Operator: Telenor (Norway)
The options I lean towards since the only choice showing 4G, is number 21 (International 4G).
Problem is that it says it's GT-I9305N and not GT-I9305. It also says (Build JRO03C ALIA) and that does not match to my build either.
Then I look at the (International LTE), which says (GT-I9305)...which is ok.
And then number 14, which says (Build JRO03C ALK5), which is the same as mine...but it doesn't say 4G, which I have.
It might sound silly, but I really dont want to make the wrong choice here and end up having a phone that either "does not work at all"
or "does not work as it should". And before anyone says that I then should just leave it alone, my only intention at this point is to let
my anti-virus get root-access, so that the firewall works and the anti-theft works.
Hope anyone can be of help and thanks in advance.
Anders - Norway
Jro03c.i9305xxalk5
awaeraas said:
Hello everyone!
New to this forum and new to Android phone. I have searched the whole forum and read through the dev-sections. Also did searches on multiple sites and through searchengines to find out what device model to use in the ToolKit...didn't find any confirming answer to my question.
As I have no posts from before, I couldn't write this in the dev-section, so I chose the thread that was closest to what I was looking for.
Question: What is the correct device model to choose in the ToolKit (I have version 7.0.0).
Information from my "about section"...
Phone: Samsung Galaxy SIII 4G
Model: GT-I9305
Android-version: 4.1.1
Build: JRO03C.I9305XXALK5
Operator: Telenor (Norway)
The options I lean towards since the only choice showing 4G, is number 21 (International 4G).
Problem is that it says it's GT-I9305N and not GT-I9305. It also says (Build JRO03C ALIA) and that does not match to my build either.
Then I look at the (International LTE), which says (GT-I9305)...which is ok.
And then number 14, which says (Build JRO03C ALK5), which is the same as mine...but it doesn't say 4G, which I have.
It might sound silly, but I really dont want to make the wrong choice here and end up having a phone that either "does not work at all"
or "does not work as it should". And before anyone says that I then should just leave it alone, my only intention at this point is to let
my anti-virus get root-access, so that the firewall works and the anti-theft works.
Hope anyone can be of help and thanks in advance.
Anders - Norway
Click to expand...
Click to collapse
Ok, so I rooted my device yesterday after reading through like 10 more threads...just took a chance, thought to myself "guts and glory" and went for it..went well =) I chose option 14 the build was the same as mine and it worked like a charm.
I am still left with a few quesitons though...might not be relevant to the thread anymore...
Does the rooting share the same build-match requirement as the flashing of a new operatingsystem?
How do I uninstall apps that were preinstalled on an operatorlocked phone?
Anders - Norway
I think you should look for app in app store, Root App delete or something like that. Then search for you operator apps/files and remove.
Hey guys
i have the internationa galaxy s3 running 4.1.2, i haven't done anything to my phone yet and im about to root it is the boot loader unlcoked and if not how do i unlock it , could someone please help me and give me clear instructions and links please thanks you so much,
BTw i know this is the wrong thread but i cant find the right one, thanks alot guys
regards nick
NickVHD said:
i have the internationa galaxy s3 running 4.1.2, i haven't done anything to my phone yet and im about to root it is the boot loader unlcoked and if not how do i unlock it , could someone please help me and give me clear instructions and links please thanks you so much,
BTw i know this is the wrong thread but i cant find the right one, thanks alot guys
regards nick
Click to expand...
Click to collapse
1. Bootloader is allready unlocked
2.For how to root look here http://forum.xda-developers.com/showthread.php?t=2255190&highlight=how+to+root
3. Flash custom recovery, would advice this one http://www.youtube.com/watch?v=lxZf39vI0Lc. Download the .tar.md5 and flash with Odin in PDA.
4. Go to the CM thread and download the latest nightly and Gapps (Google apps) and place on the sdcard.
5. Go in recovery and wipe cache, dalvik cache, format system and data factory reset and then flash the CM rom and Gapps right after another without rebooting, reboot and you`re done.
hi
hello does it matter that it's a different usb cable, its of htc because the one i got with the phone doesnt seem recognise my phone on the pc
thanks
Is it better to update (to current) android version?
Or is there ANY practical sense to ROOT at lower level android v. Then apply OS mainframe.. YDVTY
First of all, hello everyone! Second, sorry for my english because it's not my native language. Third, here comes the question. My friend have a noteKorean SHV-e160k and just flashed jelly bean 4.1.2 by random guy on the street and i dont know it's official or custom but it is completely the same as note n7000. The only problem is; in setting>more setting(network section) >mobile networks, there is no "mobile data" tickbox. In notification slide down, there is no mobile data toggle as well. Is it firmware corruption or there is no ability to disble it on korean note? Im looking for help, if someone can help i will ask that random guy about jb file and send to u. Or if there is instruction to enable it in build.prop please be quick. It's draining money because internet in our country is expensive. Thanks and sorry for asking korean devices here because there is no korean note forum.
Sent from my GT-N7000 using xda app-developers app
I am not sure if that can be done by modifying build.prop but you need to be rooted to modify anything like that
Why dont you try flashing another stock firmware
Before that,try using any mobile data toggle apps in playstore something like this