So I installed a leaked rom (froyo 2.2) and now I want to install a custom rom. I was trying to install the e2 recovery but everytime I try to flash it onto my rom I end up just staying on the Galaxy S GT-9000i screen with some looping vibrating.
After about 10min I just rebooted to see if it would fix it, no dice, so I just reflashed my older leaked rom using odin v1.
Help to install e2 recovery would be appreciated! >.<
Or to install a new rom that will allow me to install e2 recovery mode. Also when I'm re-flashing should I check re-partition what does it do and should I check it?
xxJP3 is the firmware I am currently using.
Related
Dear all i have a serious problem, i downloaded a custom rom which was darky 8.1 then i was trying to go back to my custom rom and flashed as usual through oden, after i flashed the phone doesn't want to reboot at all and keeps vibrating, kindly help what should i do, and did i brake my phone? please help
try flashing back to stock ROM by entering download mode using Odin. after d stock ROM is succesfully flashed wit Odin flashing software u install clockwork recovery and then flash Darky's v8.1 ROM again in CWM. it should nt create any prblem.
paarry said:
try flashing back to stock ROM by entering download mode using Odin. after d stock ROM is succesfully flashed wit Odin flashing software u install clockwork recovery and then flash Darky's v8.1 ROM again in CWM. it should nt create any prblem.
Click to expand...
Click to collapse
it probably would again
why the f* is NO ONE ON THIS forum capable of reading ?
1) flash back to stock via odin or heimdall
2) apply update.zip (clockworkmod / CWM)
3) then from there apply Darkys 8.0 (no-wipe or wipe)
4) Darkys 8.1 (no-wipe)
then it should work
thanks all for your reply
Thanks for indicating it. i ll b more clear nxt time. thnks zacharias.maladroit
Hi,
I've tried to flash the latest MIUI ROM on my Samsung Galaxy S but now I'm stuck at recovery mode. When I reboot I always get into recovery mode. I just can't boot it. I tried to wipe and put other rom's on it but I just can't get phone working! I can get into download mode.
So can my phone still be saved?
Hope you guys can help me out!
I would try a clean XXJPU install with ODIN, after you'r on stock install a custom kernel with root - then try cm7 (easier install ) then moving to muiu would be easy.
okay thank you, you would be a hero of you could save my phone haha.
wich custom kernel do you prefer?
If you have download mode install a clean 2.2.1 JPU whith Odin (pit 512 and Re-partition).
Once you have it working, flashing as you want.
Froyo 2.2.1 custom Kernel: speedmod k13d.
GB 2.3.3 custom kernel:Voodoo test 6.0 or GTO Ginger JVH RC1 v2.1.
both for recovery (zip files).
DamianGTO Ginger JVH RC1 v2.1 kernel works fine for gingerbread roms
if you are able to get into donwload mode, you are saved
looks like the ROM you are instlling aint working, or your doing it wrong
i would suggest trying a stock firmware first then you can go crazy and try with new stuff
I am having a problem that no matter which stock ROM i try and load, if it is a 2.3 I end up in a boot loop and have to go back to vodafone au eclair to get my phone booting again.
I was running XXJVO but the other day after installing some apps my phone froze and then wouldn't charge or boot. Flashing back to 2.1 seemed to sort out most of my problems but trying to go back to 2.3 (even via kies) results in a boot loop. Anyone have any suggestions of what I can try.
2.3 roms that i have tried:
XXJVR
XXJVO
Vodafone stock 2.3
Darkys rom 10.1 re
I also having problems with soft touch buttons they disappeared after Darkys and touck key FW update hasn't worked on any roms that i have tried 2.1 or 2.2
Anyone with suggestions would be greatly appreciated as don't wanna be stuck on 2.2!!
What cwm recvery do you have?
I would go into download mode, connect to ODIN and flash a voodoo kernal, go into recovery and turn off all the lags, I had a similar problem with bootloop and disabling all the lags cured it. Then do a wipe, reflash via ODIN to a stock firmware then flash your custom rom.
Hope this is of some help
Since I installed a version of Darky's ROM a while back, my boot screen has always been corrupt. I get the Samsung Logo, then the screen becomes all pixellated for a few seconds. The phone then boots as normal and works fine.
Now I want to have a go at an ICS ROM, but when I boot into recovery mode, I have the same problem. The text is all corrupt and I cant read any of the options.
Has anyone seen this before and know how to fix it?
Thanks
Have you tried just going to download and flashing stock rom using ODIN?
As buttwad said, flashing stock rom via ODIN is only solution...
i too faced this problem after darky's rom..
i flashed stock gingerbread via odin and now flashed Onecosmic's ICS 4.0.3 RC1..
Hi all,,
Little bit worried here, I've just flashed RocketRom v7, and while everything was successful, I kept receiving reboots. It would go to the setup wizard, then after every page it would reboot, and now that I've managed to get into the homescreen, it reboots every 30 seconds now, not allowing me to connect to wifi or do ANYTHING :/
Any ideas?
I came from Rooted GB with Speedmod GB kernel.
Followed everything in this method: http://www.youtube.com/watch?v=1BaWcZe51Ew&feature=plcp
Thanks!
Don't know what the cause of the problem is.
Flash stock gb rom with pc odin.
Do not select PIT or Bootloaders or repartition.
Flash normally. If it gets stuck in bootloop factory reset from the recovery.
Go back to stock lp3 GB rom via pc odin...root it and install cwm...flash redpill recovery..do all 3 wipes...and flash the rom..it should work..chk the videos in my sig for further assistance
Where can I find these Stock ROMs? I can only find the stock rooted ROMs, which don't seem to allow me to go past the green android at setup when flashing a rooted version of gb?
ShahinTehShiz said:
Where can I find these Stock ROMs? I can only find the stock rooted ROMs, which don't seem to allow me to go past the green android at setup when flashing a rooted version of gb?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1424997
Its KL3....not LP3...
I ended up giving up and reverting back to stock 2.3.6 and flashed the Speedmod GB kernel ... all I wanted was RocketRom v7 working and I couldn't even get that done T_T
Thanks anyway