[Q] Please help me did I brick my phone? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
I've tried to flash the latest MIUI ROM on my Samsung Galaxy S but now I'm stuck at recovery mode. When I reboot I always get into recovery mode. I just can't boot it. I tried to wipe and put other rom's on it but I just can't get phone working! I can get into download mode.
So can my phone still be saved?
Hope you guys can help me out!

I would try a clean XXJPU install with ODIN, after you'r on stock install a custom kernel with root - then try cm7 (easier install ) then moving to muiu would be easy.

okay thank you, you would be a hero of you could save my phone haha.
wich custom kernel do you prefer?

If you have download mode install a clean 2.2.1 JPU whith Odin (pit 512 and Re-partition).
Once you have it working, flashing as you want.
Froyo 2.2.1 custom Kernel: speedmod k13d.
GB 2.3.3 custom kernel:Voodoo test 6.0 or GTO Ginger JVH RC1 v2.1.
both for recovery (zip files).

DamianGTO Ginger JVH RC1 v2.1 kernel works fine for gingerbread roms

if you are able to get into donwload mode, you are saved
looks like the ROM you are instlling aint working, or your doing it wrong
i would suggest trying a stock firmware first then you can go crazy and try with new stuff

Related

Boot loop on SGS I9000 / Gingerbread and Darky V10 RC3

Hi guys,
My first post, so don't be too harsh
So, I'm stuck with a boot loop. Here's what I did:
- flashed Gingerbread 2.3.3 XXJVK with PIT file via ODIN
- flashed supercurio kernel by ficeto using ODIN (PDA)
- copied Darky's V10 RC3 zip file on phone's sd card
- rebooted in Dark Core Recovery and flashed the Darky's V10 RC3 ROM
- no errors so far, everything went smooth.
But now I'm stuck in a boot loop.
Please advise & thanks !
I guess you have to flash stock rom (or Darky Resurr.) with odin :/
Working again!
I did everything from the beginning, except this time I used K13D instead of Supercurio.
And now it's working like a charm ...
Firmware 2.3.3
Kernel: 2.6.35.7-I9000XXJVK-CL75655 [email protected] #2
Build number: Darky's v10.0 RC3
Thanks again !
I was in the same situation. The idea is that you have to flash a compatible kernel for your ROM (ie : if you use 2.2.1 firmware you can basically flash any ROM from Speedmod`s kernel to Voodo LaggFix; if you are on 2.3.3 thare are few kernels available because the devs didn`t have enough time for compiling, etc. so you have to wait). Yesterday I tested 2.3.3 Darky 10.0 RC4 Gingerbread and I had a semi-lagg experience (the only cool thing is the animation when you scroll up or down - it`s a light). So I reflashed 2.2.1 with Darky Ressurection via Odin and then I put Ultimate ROM with DamianGto (latest) kernel - I score around 1900 in Qadrant with 1200Mhz OV and 24mv UV - but it`s cool and no lagg.
I was a begginer too, but from my experience if you have any problem (bootloop, freezeloop) go into download mode, prepare Odin and just flash the device again with Darky Ressurection 9.2 to make a safe downgrade (All info is in the .zip package, PDF format).
Hi guys,
i have also the problem with the bootloop. I can´t swich in cwm or anything else.
I hear a very fast speach and then the galaxy starts the next time.
I was updating from v9.5 to v10 RC6 follwoing this:
ww.darkyrom.com/community/index.php?threads/guide-installing-rc6-need-to-flash-dark_core_2-2-first.2382/[/url]
It was fine and the phone was working fine. then i have start the lagfix in cwm. since my phone is in bootloop.
Have any idea? plz help... and i´m sorry for my bad english...
the noise you are hearing is the lagfix being installed.
this is normal on darkys rom / voodoo kernels.
try again and give it 10 mins, if it still does not boot, re flash through odin and give it some time.
if you pull battery out / switch off whilst lagfix is being installed you will get serious issues.
Hi guys,
i have flashed Ficetos JVB a second time with odin 1.3. It does´t work at all. Bootloop is coming back after the restart.
Hi azzledazzle,
i have really done it maybe one hour ago... i mean to pull the battery out....
what can i do now to manage this problem?
kannixdafür said:
Hi azzledazzle,
i have really done it maybe one hour ago... i mean to pull the battery out....
what can i do now to manage this problem?
Click to expand...
Click to collapse
boot into download mode
flash darkys 9.2 resurrection edition through odin.
make sure you have pit and re-partition.
let it boot - 10 mins max
install whatever version of darkys you want in recovery menu.
Hi azzledazzle,
at first... thanks for your immediately help!
i have flashed darkys 9.2 resurraction edition... but it still in bootloop even after 10 min boottime... (can´t hear an noise this time)
have you any idea?
did you use 512 pit ? and did you check re-partition and finally did you load the .tar md5 into pda section ??
if you did all of that and it still didnt work.
flash back to stock eclair and try again

Install XXJVR CWM coming from MIUI

Hey guys,
I just wanted to check out the JVR coming from MIUI Galnet RC3 (GB-Bootloader?)
So I downloaded the F1 Innovation V10 CWM Wipe version, put it on my sdcard and installed it. But when I started my i9000, it was still MIUI. What can I do? I did a wipe, dalvik cache wipe, Kernel Cleaning Script.
cheers
Had the same thing. I just flashed JVR using odin in download mode (including pit file).
Not sure why it behaves like this though, didn't really want to look into it at that time
I think you may need to use Odin when going to stock from cm7/miui due to the file system partitioning
Sent from my GT-I9000 using XDA App
Thanks alot. I tried it with Odin before aswell and it worked. So I wanted to have an easier solution (tried to flash CWM3 because the CWM Rom is just CWM3 compatile and the MIUI got CWM4) That didn't work. So I did it with Odin again.
But every time I flash the Samsung ROM after 2 hours of use I want to go back to MIUI because it hangs alot .
1. u have to flash latest JVQ or JVR via odin to flash custom samsung roms like F1, amestris, darky etc
2. but if u want miui or CM7 then just flash over the custom rom and after that u can upgradeor change to CM7 or miui without flashing stock roms like jvq [CM7=MIUI]
3. and if again u want to go to no. 1 again then u have to do the no.1 step again
the file system and partition are same in MIUI & CM7, but custom roms have defferent file system.

New Roms

sorry for the newb questions, but i am finding way to much cross references for rooting and unlocking a bell vibrant could someone help me out I would like to put on a new rom pls.
1. Go to this thread and download JVT. Flash JVT with Odin and make sure re-partition is checked.
2. Go to this thread and download the CF-Root kernel for JVT. Flash the kernel with Odin
3. You should now have stock 2.3.5 with root and CWM installed. Reboot into recovery and use CWM to flash whatever custom ROM you want.
thanks very much just finished and it worked out very well.
2.3.5 and 2.3.6 why not jvu semaphore kernel 2.5.0 and @ oserx o.7.1 rum is the best and fastest rom I had

[Q] Back to Eclair Stock ROM from Gingerbread 2.3.5 (Stock)

I can flash directly from Gingerbread? I tried 2 times with OdinOne Click flash but I have not flash because Odin gets stuck in factoryfs. Thanks to USB JIG I managed to revive my Captivate.
yes you can, but why?
odin sometimes locks up. keep trying. where did you get this one click?
Here: http://forum.xda-developers.com/showthread.php?t=731989
I will try with a file .tar i got. I need Flash CyanogenMod 7.1, the Stock ROM Gingerbread is worse than Eclair, I am disappointed, I thought it would be better
Another question. It is necessary wipe/data before flash with Odin?
Just flash CM7 from where you are now. And Odin wipes it for you
Sent from my CM9 ICS i897 Captivate
Are you sure that I can flash directly from Gingerbread 2.3.5 (Stock) to a ROM CyanogenMod 7.1 (Official)? Had I known it would not be with the disastrous Stock ROM 2.3.5. And from any Custom Kernel? I have Corn Kernel v7.06
Yes flash it with CWM Recovery and it will boot loop (supposed to happen). Pull the battery and put it back in. Boot into recovery and wipe everything then flash CyanogenMod and Gapps. Reboot and you're good to go. If you wanna flash a custom kernel I recommend Glitch 13.1

[Q][SOLVED] How do I flash an other JB ROM if my phone only lets me download mode?

Hi, yes, this is Dog.
No, seriously, today I tried to flash semaphore kernel 2.2 (JB) to my Jelly Bean Port Rom , wich came with Devil's kernel. When the instalation finished the phone rebooted and now it gets stuck with the Semaphore's kernel screen.
Recovery doesn't work.
Download mode DOES work.
I don't know too much about bootloaders and deeper stuff.
So, what shall I do? I just downloaded Tsunami's AOKP JB ROM, but its a .zip and Odin only allows .tar.. And I dont have a nand backup with JB (i have it with ICS)
Help me! please!
SOLVED: Flashed Devil's kernel back with Odin. Then reflashed the rom with CWM.

Categories

Resources