Related
Hi I'm hoping someone can help me with what appears to be a unique problem based on all the searches I've done.
I've been able to install ROM updates with no problem for a long time with my Cingular 8125, however recently I'm getting stuck on the bootloader screen. It's a little strange, but here's what happens:
1) From Windows, if I try to flash ROM using USB it gets as far as rebooting the device and bringing up the bootloader multicolor screen, and it says USB on the bottom as it should. From there I can't get to the device at all and the installer fails with a device connection error. All I can do then is reset and get back into the OS like normal.
2) With the SD card method, I get to the bootloader screen but it never loads anything from there, and again I have to reset and just get back into the OS.
I'm running IPL/SPL 2.26, using Molski's latest ROM, but now can't install any other ROM because of this.
Any ideas?
Thanks in advance
groggrog said:
Hi I'm hoping someone can help me with what appears to be a unique problem based on all the searches I've done.
I've been able to install ROM updates with no problem for a long time with my Cingular 8125, however recently I'm getting stuck on the bootloader screen. It's a little strange, but here's what happens:
1) From Windows, if I try to flash ROM using USB it gets as far as rebooting the device and bringing up the bootloader multicolor screen, and it says USB on the bottom as it should. From there I can't get to the device at all and the installer fails with a device connection error. All I can do then is reset and get back into the OS like normal.
2) With the SD card method, I get to the bootloader screen but it never loads anything from there, and again I have to reset and just get back into the OS.
I'm running IPL/SPL 2.26, using Molski's latest ROM, but now can't install any other ROM because of this.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
Just for everyone's information: I was able to resolve this by re-running lokiwiz and doing a SuperCID unlock...
Greg.
How did you make to lokiwiz recognize qtek?
My qtek shows:
First (and only) screen shows 4 color (red, green, blue, white), so according to posts on HTC-forum that must be boot loader.
On right upper corner of screen stands RUU
Line bellow, in the upper left corner shows IPL 2.26
Approximately 3 lines bellow still in the left upper corner of the screen shows SPL 2.26
When connect USB cable to qtek on the left down corner shows USB
I can acces to qtek via Multi-port/USB TTY ver. 1.11a, but when I start lokiwiz, even after long period of time nothing happens?
Please give us a precise procedure, nothing else didnt help
I have a G4 Wizard which is stuck in Bootloader mode (i.e. the multi-colored screen).
No matter what ROM I flash onto the unit, it always reboots back into Bootloader mode. I have tried a variety of ROMS including Wizard_Love, and vanilla WM5 and WM6 ROMS.
About three days before this occurred, I had flashed TNT.1933 (Professional + HTC Home) ROM onto the unit. About three days of running TNT I noticed that the cellular radio levels were starting to act up. So I reflashed Wizard_Love with the intention of subsequently reflashing TNT on top of Wizard_Love (this is how I have always performed flashes, by layering the intended flash onto Wizard_Love, and I've never had any problems). Well, this time as soon as Wizard_love had successfully flashed (according to the update utility), my Wizard got stuck in Bootloader mode. It's been stuck since.
I've since tried re-flashing a number of ROMs with no success. The Update utility says that the flashing is successful and there are never any errors, but the Wizard itself always reboots into the multi-color Bootloader screen. I simply cannot bypass this screen.
Any HELP would be appreciated. At this time my Wizard is unusable. And, I really miss it!
xda_student said:
I have a G4 Wizard which is stuck in Bootloader mode (i.e. the multi-colored screen).
No matter what ROM I flash onto the unit, it always reboots back into Bootloader mode. I have tried a variety of ROMS including Wizard_Love, and vanilla WM5 and WM6 ROMS.
About three days before this occurred, I had flashed TNT.1933 (Professional + HTC Home) ROM onto the unit. About three days of running TNT I noticed that the cellular radio levels were starting to act up. So I reflashed Wizard_Love with the intention of subsequently reflashing TNT on top of Wizard_Love (this is how I have always performed flashes, by layering the intended flash onto Wizard_Love, and I've never had any problems). Well, this time as soon as Wizard_love had successfully flashed (according to the update utility), my Wizard got stuck in Bootloader mode. It's been stuck since.
I've since tried re-flashing a number of ROMs with no success. The Update utility says that the flashing is successful and there are never any errors, but the Wizard itself always reboots into the multi-color Bootloader screen. I simply cannot bypass this screen.
Any HELP would be appreciated. At this time my Wizard is unusable. And, I really miss it!
Click to expand...
Click to collapse
Have you tried a hard reset?
derkesthai said:
Have you tried a hard reset?
Click to expand...
Click to collapse
Yes, I've tried several hard and soft resets. It still gets stuck at the multi-colored Bootloader screen.
I have had this same probllem with my 8525 atleat 4 to 5 times. The only thing that worked for me was to download the most recent flash for my phone from my carrier. At that point no more problems, I can then flash any ROM I want from there.
a2612596 said:
I have had this same probllem with my 8525 atleat 4 to 5 times. The only thing that worked for me was to download the most recent flash for my phone from my carrier. At that point no more problems, I can then flash any ROM I want from there.
Click to expand...
Click to collapse
Thanks, I thought of that as well. The phone is a T-Mobile (US). Unfortunately, I have been unable to find a copy of the original ROM. The ROM is no longer available on XDA-Developers FTP server and both the forum and wiki links are broken. Also, I can't get it off the T-Mobile web site since it asks me for a T-Mobile phone number, which I do not have. Here's the T-Mobile download page:
http://www.t-mobile.com/wmupgrade/
Does anyone have an alternate download address for original T-Mobile ROM? Of can someone with a T-Mobile phone number download the file for me. Thanks.
URGENTLY looking for a copy of the original T-Mobile (US) ROM - either WM5 or WM6. I'm stuck in Bootloader mode and I'm advised that reloading the original ROM might revive my Wizard.
Here's the T-Mobile download link, but it asked for a T-Mobile phone number which I do not have (I'm not a T-Mobile customer):
http://www.t-mobile.com/wmupgrade/
try here:
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
here:
http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
I cant flash back the official rom? Im also stucked with the bootloader. It says connection error. But there is a USB display in the lower left side of the bootloader. Can anyone there can tell me how to do it?
xpxj said:
I cant flash back the official rom? Im also stucked with the bootloader. It says connection error. But there is a USB display in the lower left side of the bootloader. Can anyone there can tell me how to do it?
Click to expand...
Click to collapse
what connection error it exactly displays ?
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Before I flashed my first rom, I read wiki.xda-developers.com to make sure I understood what I was doing, and used the search button, instead of risking turning my phone into a paper weight.
Since then, Crackwhore has written a very helpful post at the top of this forum about how to use HSPL and USPL to allow you to flash roms.
yeah i know all that. not my first time flashing a phone but the first time it got stuck loading the bootloader. and specially when i´ve only used the HTC update.
darfor said:
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Click to expand...
Click to collapse
you mean you couldn't get to boot loader page?
So you already have HSPL 1.56 installed (or have SPL1.54 and used USPL)?
If you have HSPL you could try renaming the .nbh file to blacimg.nbh and copying it to the SD card and entering bootloader
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
AFW said:
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
Click to expand...
Click to collapse
try dnloading the rom again amd try.
the file might be corrupt
Have tried that many times. File is not corrupt. I'm getting really worried this is now a brick...
OK, if you can get phone into bootloader, it is not bricked
What does your SPL say in bootloader? Do you get any errors when trying to flash rom? Are you using USPL or HSPL? If USPL, you have to use it before every flash to new rom or radio. If HSPL, are you using correct version?
Was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes (Vista64) for a split second and then nothing else happens. The Vista64 system's USBs work with THD and have been used to sync over past few months.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Your SPL says 1.54.0000. When you try and run USPL.exe have you remembered to disable your antivirus?
Have you tried usb method instead of card for flashing rom?
I know you have said that youi have used usb for syncing, but when in bootloader does it change from 'serial' to 'usb' when you connect HD to PC?
Fallen Spartan - I want to thank you for taking the time to help me resolve this problem. Very much appreciated!
1. Yes, anti-virus disabled and indeed removed from the PC.
2. Yes, have tried the USB method at least 20 times.
3. Yes, the bootloader changes from Serial to USB. It then goes to the progress indicator screen and hangs on 0%. The progress indicator on the RUU on PC also stays at 0% and eventually times out. I've gone through the Recovery routine at least 20 times, with no luck.
When I try to run SSPL-Manual-TouchHD.exe it says "not a valid Win32 application".
I'm a bit perplexed by this.
You have obviously successfully flashed Duttys V3.9 so drivers are fine, you know how to use USPL, both flashing methods (SD card and usb/pc), disabled anti-virus, phone in bootloader.
Have you tried to reflash 1.56 rom or possibly performing a hard reset before trying to use USPL or HSPL. I doubt this would make a difference though.
Have you tried cRaCKwHoRe's USPL GUI v 2.5 Application?
You don't get any code errors?? I'm struggling to find a solution here.
Yes, this is most vexing. I've flashed innumerable times before and never had an issue. I suspect the SPL is fine, but somehow the actual WM ROM image is corrupted. Will now try to load Std 1.56 ROM image again...
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa (though I'm a rugby fan).
AFW said:
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa.
Click to expand...
Click to collapse
No accomodation required, just glad you got it sorted
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
can anybody help me at all
Adamsville: perhaps you're stuck in bootloader mode because the WM ROM image flashed on your system has become corrupted or disabled, ie the only thing the system can boot into is the bootloader.
Try flashing a new compatible WM ROM image and see if that works.
AdamsvillE said:
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
Click to expand...
Click to collapse
a hardreset followed by a 1.54 base rom will solve all ur probs.
or lower spl to 1.14 cos ur stock rom is a 1.14 base as suggested by th name..
cheers
Hello everyone!
I recently installed Android Froyo 2.2 (Incubus26Jc's Super FroYo RLS15 All Language), following mainly this thread http://forum.xda-developers.com/newthread.php?do=newthread&f=602, and also reading many others, about hardspl etc.
Everything went perfect! The phone workes just fine, full functioning!
My problem is that, after deciding to go back to windows mobile for selling my phone, I followed these steps :
"Switching back is very easy. All you gotta do is download your favorite WinMO rom, and rename RUU_Signed.nbh to KAISimg.nbh and place it on your SD card along with KAISDIAG.NBH.
Place the SD into your Kaiser and hold the Power button and camera button down, then take your stylus and hit the reset button. Follow the instructions on the screen to flash your Kaiser. When the flashing is done you should be back to running Windows Mobile."
I downloaded the shipped rom RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17 but the update process stopped at about 1/3, and the phone rebooted with Android OS.
Also, when I press the power button+camera button, for a new update flash, after the three colors screen(KAIS130, SPL-3.07.0000, CPLD-8), the message "Loading..." appears and stucks.
I guess, my phone no longer has hardspl, and there is no way to put it back, neither put back the signed rom, if there is no WM os????
Any help/suggestions???
Thank you very much, in advance
I suggest you follow the tutorial switch back to Windows Mobile by Dukenukemx ~ http://forum.xda-developers.com/showpost.php?p=6461906&postcount=1
looks like a really lost hardspl. Maybe this will help you get back to windows http://forum.xda-developers.com/wiki/index.php?title=Kaiser_stuck_at_bootloader
aris0602 said:
I downloaded the shipped rom RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17 but the update process stopped at about 1/3, and the phone rebooted with Android OS.
Click to expand...
Click to collapse
One question:
What version radio was on the phone BEFORE attempting a WinMoBlows flash?
It looks like the shipped rom had the 1.27.12.17 radio included in the bundle and, if so, this would explain the error in flashing.
One thing to check would be at the bottom of "Settings" page, touch "About Phone". Towards the bottom you will see "Baseband Version". The numbers at the end are your radio version and should be the original radio numbers. If it says "1.27.12.17", you've found one problem...
I would say follow dukenukem's post and try to reflash HardSPL again.
I haven't run into this problem yet since I will probably never sell either of my Kaisers... lol.
same problem at my place...
installed android, about 2 month ago, wanted to switch back to win and couldnt do it that simple as say "Switching back is very easy. All you gotta do is download your favorite WinMO rom, and rename RUU_Signed.nbh to KAISimg.nbh and place it on your SD card along with KAISDIAG.NBH. " in Dukenukemx's tutorial.
I have tried everything putting on sd card many ROM's Hardspl's, then i found this on my pc RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88. 07_1.27.12.11_Ship when i try to flash via usb (manually enter bootloader and connect usb cable) it get to 1% and reboots and ond rom update software says ERROR [294] : INVALID VENDER ID and above Exit button says: VER4-KBKV5867-HUEbc568-KBKV58670...
and when i try same rom to flash via sd card it says
Loading...
Checking...
0028002
Not Allow
with any other it stay's at 0% on phone and nothing is showed, then on RUU says ERROR [262] : UPDATE ERROR and down is button Recovery, tried a lot's of times nothing...
Then i saw that you PoXFreak said to check radio in baseband mine is 1.65.17.56
any sugestions please?
Another user with problems...
Tried a return from android to windows mobile because of the random locks that were happening in android (also some other weirdnessess...)
Now when it is put a microSD with kaisimg or kaisdiag it goes into white loading screen and stay there...
(tried flashing Kaiser_HTC_ASIA_HK_WWE_3.34.721.2, that seemed to be the one who came with my phone)
The baseband message somebody talked above shows only "HTC"
When in tricolor bootloader the following is showed:
security unlocked
KAIS***
SPL-3.28.0000
CPLD-8
(Still gonna try updating it connected to the computer, seems like usb and serial dettection are working, for it will dettect the charger connection and start showing USB in the lower part of the screen, battery got very low overnight, still needing to charge it to really do some test)
_____________
Update:
Flashed ok through USB, just entered tricolor bootloaded, connected usb and executed the original rom installer.
hello everyone
I used to have this kind of problem.. my hard spl broke when i tried to flash a stock wm rom from android.
In my opinion, each stock roms comes with specific SPL, radio version, etc. It means that when you are trying to flash stock rom, you also flashing new SPL. the problem is, the new SPL broke your hard SPL so you won't be able to flash anything to your kaiser except your original stock rom which comes with your kaiser.
you can find some stock roms for kaiser here : http://shipped-roms.com
Since I'm only sure that my kaiser originaly comes with WWE version I almost tried all the WWE stock roms there, but my search ended when I flashed RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign_22.45.88.07_1.27.14.09R2_Ship.exe, this rom works for my phone and it seems that only this rom didn't give me "invalid vender ID" message.
so, keep trying to find your original stock rom
and after you managed to flash your stock rom, don't forget to flash hard-SPL again if you still want to mess around with your kaiser.
good luck
Another way to do it, albeit a little tougher, would be to use Oli's NBH tool and remove the SPL and radio from a stock rom. That way you get to keep the radio and SPL while flashing a stock rom.
Keep in mind that some WM roms only like certain radio versions, and you may end up having to flash an older (or newer) radio to find what works best.
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
RVerverda said:
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
Click to expand...
Click to collapse
You must SPL, do you have? 3.29 at least
you must have a radio newer than 1.70.X (use 1.70.18.02), didn't you read the thread "how to replace windows mobile with android" ?
If you can't update radio through the SD, use KaiserCustomRUU.exe: put it on a file wherever you want and put the radio you want also on the file and name it "RUU_signed.nbh". It's all on the threads man!
here's the SPL thread...http://forum.xda-developers.com/showthread.php?t=498320 USE THE SEARCH MAN!
no sound is because of no radio updated...