Rogers Captivate i896 - Stuck on AT&T World Phone? - Captivate Q&A, Help & Troubleshooting

I have the Rogers Captivate - SGH-i896. I was following a tutorial on enabling tethering on my phone (on maggadget) but something went really wrong. I got Odin3 working, but when my captivate restarted, it got the a screen with "AT&T World Phone" and froze. I unplugged my phone and restarted it, but everytime I restart my phone, it shows the "I896 Samsung" screen then stays on the "AT&T World Phone" screen and doesn't do anything else.
I can still restart to go into download mode.
Have I just killed my phone? Does anyone have suggestions as to how I can get my phone back up?

flash another rom with Odin

would you point me to a good tutorial for that? thanks a bunch

Since you have download mode you are ok. You can get it back going using odin, but I am not aware of a Rogers-specific Odin flashable ROM.
I don't know what the 3-button combo situation is with the Rogers Captivate, but many AT&T Captivates lose it when flashed to stock, so I would not use the Odin one-click flasher on that phone, because if it disables download mode and doesn't work you'll be screwed. People are running the Cognition ROM on Rogers phones so you might try that. Beta 9.1.3 has an Odin flashable version. There is also an Odin version of the stock AT&T ROM with 3-button fix, which may work for you, at least temporarily.
If you get it to a point where you can install clockwork recovery on the phone, someone posted a nandroid backup of his Rogers phone here. (If you can get into recovery mode then you may be able to push a clockwork recovery to the phone via adb, e.g. "adb push update.zip /sdcard".) That backup hung my phone after the AT&T logo, but mine is an AT&T version and I ran the restore from a froyo build and I really don't know if one or both of those facts had anything to do with the failure.

What is "clockwork recovery"?
I will install the Cognition, thanks!

strawberrybanana said:
What is "clockwork recovery"?
I will install the Cognition, thanks!
Click to expand...
Click to collapse
Sounds like a good plan. Clockwork recovery is an enhanced recovery mode that has added functions.

I tried installing Cognition, but Odin3 won't detect my phone, now. Any suggestions?

strawberrybanana said:
I tried installing Cognition, but Odin3 won't detect my phone, now. Any suggestions?
Click to expand...
Click to collapse
Odin must be running before the phone is plugged in. Disconnect the phone from the computer. Start Odin (for some people right-clicking and running it as administrator is necessary to get it to work). Now put you phone in download mode by holding vol up+down and pluggin in the USB cable. It should detect in Odin.

f*ck yeah! cognition looks so good.
I read elsewhere that your browser sometimes interferes with Odin's detection of your phone. That was my case, thanks for your help <3

you can fix with odin but im not sure what you will need to do about unlocking, i read somewhere that people were haveing trouble with losing the unlock code after the froyo upgrade. it's not official so you may have trouble getting support from rogers or att. ive never unlocked a phone so i dont know what the details of doing so will be but i understand it is more common up in canada because of roaming charges.
there is are a few odin flashable att roms that can be rooted, clockwork mod recovery installed and a cognition eclair version can be used. id do a search of unlock threads on the forum first and see what people have to say about froyo if unlocking is something you are interested in.

I had the same thing. I disconnected the cable, held the power, v+ and V- buttons, the screen went blank and then released the volume buttons. Its all good now!

Now my phone is not detecting the 3g network. I think it has something to do with using at & t rom while on a rogers net work.any ideas?

strawberrybanana said:
Now my phone is not detecting the 3g network. I think it has something to do with using at & t rom while on a rogers net work.any ideas?
Click to expand...
Click to collapse
You have to manually enter your Rogers APN from settings -> wireless networks -> mobile networks -> access point names. Search up "Rogers APN android" and I think it's the first one that pops up.

Yes, got it working. No need for my apartment internet connection now that I can use Mobile AP and USB Tethering!

Download mode not working...
I have the Rogers Captivate I896 and I'm still stuck on the situation where download mode does not work. This happened after I tried flashing one of the froyo firmwares for the I897 version of the phone.
Whenever I press the volume up and down buttons together and plug in the usb cable, only the battery icon shows greyed out with the loading circle. I've tried going into recovery mode pressing both buttons and the power button, the only thing that happens is the at&t welcome screen shows but keeps looping.
Is it possible that I bricked my phone? If so, would I be able to bring it back to Rogers even though it shows the at&t boot screen? I have bought the phone two weeks ago, so I'm still under the one moth warranty.
Any help would be much appreciated. Thanks in advance

deadly0ne said:
I have the Rogers Captivate I896 and I'm still stuck on the situation where download mode does not work. This happened after I tried flashing one of the froyo firmwares for the I897 version of the phone.
Whenever I press the volume up and down buttons together and plug in the usb cable, only the battery icon shows greyed out with the loading circle. I've tried going into recovery mode pressing both buttons and the power button, the only thing that happens is the at&t welcome screen shows but keeps looping.
Is it possible that I bricked my phone? If so, would I be able to bring it back to Rogers even though it shows the at&t boot screen? I have bought the phone two weeks ago, so I'm still under the one moth warranty.
Any help would be much appreciated. Thanks in advance
Click to expand...
Click to collapse
IM at your EXACT situation.
CAN SOMEONE please help

DrunkenWonton said:
IM at your EXACT situation.
CAN SOMEONE please help
Click to expand...
Click to collapse
This might help you get out of the situation.

hey_joe said:
This might help you get out of the situation.
Click to expand...
Click to collapse
Hey, thanks for the link. I've read the instructions and it seems that the phone would still need to be able to get to the "PC ! Phone" logo. And I am not able to get to that on my phone.
I'll still try it, however, I don't have a spare micro usb with me at the moment. Does anyone have any alternative methods before I go through this?

deadly0ne said:
Hey, thanks for the link. I've read the instructions and it seems that the phone would still need to be able to get to the "PC ! Phone" logo. And I am not able to get to that on my phone.
I'll still try it, however, I don't have a spare micro usb with me at the moment. Does anyone have any alternative methods before I go through this?
Click to expand...
Click to collapse
Based on my observation reading through that thread, as long as your phone powers up, there's a very good chance you can get it into download mode using the jig. The only time the jig doesn't work is when your phone's screen is completely blank no matter which which button you press.

If you have the phone connected to a usb cable and its rebooting wait till you hear the usb connected sound on your pc after the att logo screen, then send a "adb reboot recovery" or "adb reboot download" command and it will reboot and go into recovery or download mode. Usb debugging has to be enabled though.

Related

I know,Another Bricked Phone...sigh

I had loaded the ginger clone rom and all was well. I then however wanted to swap kernels so i loaded up seitrons cwm 1.5.6 and proceeded to flash through cwm. this has now become the worst day of my life. the phone will not boot past the galaxy s screen. i cannot not get into recovery and both computers now say usb device not recognized when in download trying to flash odin. i am worried that something is corrupted on my phone because not matter how many times i uninstall and reinstall the drivers no luck. i think it is officially bricked and im sol. maybe some great minds can figure it out here.
It's not bricked - issue is trying to get your computer to recognize your phone when in download mode so you can flash it back.
What OS are you running? Also - where did you download the drivers from? Some seem to work better than others.
If you can get to the galaxy screen you might still be able to to get into recovery. pull out the battery and use the 3 button combo. Hold down both volume button then power and let go of the power button after it turns on. then just reinstall the rom
I'm willing to bet you can also get into Download Mode either with button combos, or a JIG. Once in Download, you can use Odin to restore to JF6, and have a working phone to flash around with again.
i can get into download mode no problem. and i think it is quite possible drivers are corrupted on the phone itself. my wifes phone works on the same exact setup. no usb device not recognized error. i have tried the drivers from here and samsung directly with no luck. 3 button combo does not work. sim out sim in battery out and in. but like i said it will just not register with the comp and hers will. so im going to att and seeing about replacing it. but i will see how that goes. ive done this lots of times with no issues ever.
download works
3 button combo does not so no recovery
usb device not recognized error
thanks for the help and keep it coming i will try everything if i haven't already.
Try current usb port
Sent from my SCH-I897 using XDA App
Think I'm in worse shape. Tried flashing just the kernel to get BLN working again (last ROM I put on somehow loaded a non-compatible kernel). Now the phone boots the white ATT screen and just sits there. Can't get it into D/L mode with 3-button and doesn't respond to computer I have been using to flash ROMs for a couple weeks now...
Am I hosed? ANY help would be greatly appreciated...
You could try to use a JIG to force your phone into Download Mode
Okay...well, got into D/L mode finally. Used Odin to get it back to factory. Used the One Click rooter again, except now it boots to recovery 3e, which doesn't let my power button work as the okay button Pulling the battery to reset it, but it will no longer go into D/L mode to use Odin again. It keeps booting to the recovery Utils, which I cant get out of...*sigh*
Thoughts?
at least your able to do something i still cannot get my phone into recovery or to be recognized by the computer. it is not the drivers so i have no idea. i can only think that something got funked up with the kernel flash.
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
magnumrt562 said:
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
Click to expand...
Click to collapse
i actually tried this yes. i had a blackberry cable from the storm (shivers) that was laying around. tried that but no luck with that or my wifes cable as well. but a good tip for others nonetheless
Pirateghost said:
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
Click to expand...
Click to collapse
I just want to quote this to stress the importance.
Thank you, didn't realize that (still sorta new to this)...
I downloaded a zip (I thought from here somewhere) that extracted into the 4 files. Anyone got a link to the JH6 set of files?
I also downloaded DG's "One Click Odin", but it doesn't seem to really do anything when I run it unless I manually load all the files. Also, I don't see a "Master Clean" like the post refer too
are you sure you downloaded the right odin? in the one click version, theres no option to load files at all. only a "start" and "master clear"
make sure the odin one click is open before you connect your phone.
http://forum.xda-developers.com/showthread.php?t=731989
You guys rock! I don't know how, cause I could have sworn I D/L'd it from that link before and I got the generic Odin, but it looks like I have the right one now! Thank you for your patience with us noobs as we start getting into this new world!
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
zippox180 said:
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
Click to expand...
Click to collapse
I was having the same problem. Have you tried powering off, start odin, hold both the volume up/down, then plug in the usb to your phone?

I broke recovery mode ?

Hi...
Ok.. I was on rogers 2.2 stock, I was trying to follow instructions to install paragon, anyway, it didnt work, my phone was still working great tho.. so i tried flashing stock jh6 with the one click from the wiki here... That worked and I now have a rogers phone with att stuff loading up. anyway, I am trying to complete the instructions for paragon but I can no longer get to recovery mode.
the att logo keeps rebooting if i keep holding down vol up and down, what do I do now ?
Edit : I cant seem to even get to download mode Recovery mode always worked before, download mode was always tricky, but it refuses now
do you have adb installed?? if so run adb reboot recovery in command prompt.
OR
Take out battery, take out sim and SD card. press and hold VOL UP/DOWN. put in battery, press power. release power upon seeing AT&T sign. pray.
Works for me about 99 times outta 100 at this point!
but i prefer adb since its much more fool proof!
distortionist said:
so i tried flashing stock jh6 with the one click from the wiki here...
Click to expand...
Click to collapse
<captainhindsight>You should not have flashed JH6.</captainhindsight>
As per the above post, boot the phone, enable debugging and use 'adb reboot recovery'. After you get that sorted, flash the 3 button fix and never flash to stock unless stock firmware is your final destination or your phone is so hosed you have to use download mode to fix it. If you do use odin in the future then use the right one for your phone build so you don't lose your button combos.
opcow said:
<captainhindsight>You should not have flashed JH6.</captainhindsight>
Click to expand...
Click to collapse
Nor should you have allowed yourself to be photographed in a compromising position wit Courtney Love...Sorry, couldn't resist.
but I only followed instructions Everyone that asks was getting told to go try and blah blah, well that was what I was doing.
You know now I am really stuck. I did use adb and restored stock and didnt want to mess with my phone anymore, but the at&t logo kept popping up, im with rogers. I found a fix and was following those instructions when odin screwed up, it started flashing then said it failed, it happened to me once before but my combo key was working then.
I dont understand why it stopped, It seemed to be intermittent, a bunch of issues, after flashing that at&t rom.
I wish I could fix it, I am stressing out over it, ill get the stuff for that jig tomorrow and hope that works. This phone is brand new! I am not a modder or hacker, I got stiffed by rogers and samsung with the voice dial over bluetooth issue, they wouldnt take the phone back.
I would love to have the att logo gone, rogers froyo 2.2, and broken bluetooth.. Its better than a paper weight. Please help me ! You know what.. I can live what that logo.. I just want to get my phone operational.
Goodnight, and thanks for your help.
i'm guessing you didn't flash the 3 button fix that opcow suggested before doing anything else?
if you can get into download mode, flash this:
http://forum.xda-developers.com/showthread.php?t=812434
No I didn't, in its forum it says if you had no problems initially with the 3 buttons, this is not for you. Thats what it said! I was told I shouldnt have done that and should have flashed the 3 button fix after the fact.
I just bought resistors, ill be home later to try and force download mode.
Thanks for your help, I am not as upset as I was yesterday, I was tired.

[Q] Tab totally unresponsive.

I have a Verizon Galaxy Tab 7-inch with WiFi and 3G running Android 2.2 (Froyo). I mistaking tried to flash the new Android 2.3.3 before realizing it was only for GSM phones. I followed all the instructions using Odin3 (1.7) and everything looked like it worked except it never rebooted and I never got it into the Recovery Mode. I was still able to get in Download Mode so I tried to find a compatible 2.2 ROM to flash. I flashed the Roto JME rom, it didn't reboot. I flashed P1000NUBJM2_P1000NUBJM2_P1000NUUBJM2_HOME and it didn't work. Odin3 seemed to install these, I always got PASS. Now my Tab is totally unresponsive. Odin3 acts like it's installing but I can't get the Download Mode screen anymore. How do I get it back to factory or some working system? I don't expect to save anything I've loaded, I just want it to work again. HELP. Thanks.
P.S. If I can't fix this, who do I take it to to re-install the system? I got it from Verizon.
Can you get it into recovery mode? (Turn off, then Power + Volume UP)
No success
No, nothing I do will show anything on the display. I can't get into Recovery Mode or Download Mode. However, when I'm hooked to the computer and press the correct buttons to turn on/off or Download Mode, I hear the computer beep indicating it sees the USB and the yellow COM widget in Odin3 lights up and says it's up and in Download Mode. I can then flash it and it says PASS. I also just tried Heimdall and it also seemed to successfully flash the original Verizon SCH-I800_VZM firmware. Nothing displays when I try to go into Recovery Mode. I don't even see the picture of the battery when I plug it into the wall. Have I somehow trashed by screen?
Hi ! I got the same problem and now my Tab totally bricked...
Samsung just needs to give us the files and software to load these tabs back to stock! That would end the return issue for the carriers and let us unbrick them. Like any other device, there is a way to fix it without having to send it back.
Sent from my ADR6400L using XDA Premium App

[Q] Captivate Soft Brick - Need a rooted Odin solution.

Hi
My brother (a no-geek) has a captivate, and lives in a different city (I donot have physical access to the phone). He visited me few weeks ago and I installed CM-7 on his phone, i know my bad. Some of his videos were not working, so i asked him to update to the latest CM-7 build. He download the build, saved it on int sd_card and used ClockWork Recovery to install the selected ROM. Upon reboot it entered in never-ending splash screen. I found couple of odin ROMs, and posted him link, we tried to flash them, but no good.
Status --
The COM ports are detected, but the process at times halts at <SET PARTITION> at times at <SET UP>... at times all thread completed successful would show up as soon as hitting START.
I dont have a captivate, can someone please suggest a sure shot solution and post me a link for ODIN, with a root rom. I am using Team Whiskey on my Vibrant, and I prefer stable modified ROM because of its features and power.
I can explain him the process on skype using desktop sharing, but the ROM should be good. Thankyou very much in advance.
if he can access recovery, try wiping everything thru recovery then start again
Phone is in Soft Brick state.
Phone is in Soft Brick state. So i cannot boot into the phone and go to CW recovery.
What he needs is just a stable usb connection that's how he got to this point, bad communication between the phone and computer. On cm7 I beleive you need the nexus s drivers installed. Also make sure it's plugged into a usb port that's attached directly to the motherboard (back of pc, port 1 on laptop)
@studacris
I think the drivers are already installed good. The connection is also good, as i can the COM port detection in the ODIN, with one of the boxes changing its colour from NO-COLOUR to YELLOW-COLOUR.
I think the ROM builds are not good. They go action-less during flashing, actually nothing (progress bar) comes on phone, it keeps showing the Downloading screen, endlessly. Odin usually is stuck at at <SET PARTITION> at times at <SET UP>...
Can someone post a link for a test one click odin. Well i would prefer one click.
You did try DG's JF6 one click, thats the only one I use, how are you establishing dowload mode on the phone or are you even doing this.
REMY4223 said:
I would suggest to Odin back to stock then update to Froyo via Kies.
Click to expand...
Click to collapse
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Ragin Caucasian said:
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Click to expand...
Click to collapse
+1 If you read the OP the problem is he can't flash back to stock he is having problems flashing anything period, @ the OP correct me if I'm wrong but I have a strong hunch that you are leaving out some pretty crucial steps, I have a feeling that you are not putting the phone into download mode, I also believe that you are gonna need to make a jig and pay a visit to your brother to help him out especially if its bricked the same way mine just was flashing with cm7 roms. But if you are getting a com port to show without having to put in download mode then you are farther along in the boot process. If this is the case you may be able to adb into recovery do a full wipe excluding /boot and reflash. Will the PC recognize the phone with it in its current boot locked state? If so then recovering should be somewhat of a breeze.
http://forum.xda-developers.com/showthread.php?t=829392 read this post it may help otherwise there are tons others
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
viveksharma2108 said:
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
Click to expand...
Click to collapse
Try putting the phone into download mode after you open Odin. Which version of Odin is this? Also, installing the nightly build of CM7 again often fixes the boot loop on the newer builds. I would try that if you can get to recovery.
Sent from my SGH-I897 using XDA Premium App

[Q] Bricked phone? flashed SlimICS through Clockwork

hey all, i've had my captivate for about two years now, and for a while i used cognition, then for the last year i've been using firefly. firefly has completely destroyed my phone's speed and responsiveness, and i needed to clean everything off and start with a minimalist ROM. so i picked slimICS.
i'm still very hazy on the details and terminology of flashing ROMs, but i got two to work (i remember using one-click root thing in 2010, and then in 2011 i flashed firefly through clockwork) so i figured it shouldn't be a problem to install slim, which i figured would be my last ROM until next year, when i'd get a new phone.
so i backed up my stuff, tried to get into recovery mode with the 3 buttons (didn't work, unsurprising since it didn't work last year either), took out my SIM, went to CWM, and selected the flash rom option. this restarted the phone and sent it into recovery mode--except it was the stock recovery, and i couldn't select anything because i think firefly made the phone think it was the i9000 model from canada, instead of the i897 captivate, so it assumed i had a physical "ok" button on my phone (which i obviously do not). i tried the power button, the various capacitive buttons on the bottom, nothing would select any of the options, so i just took out the battery and put it back in. the phone immediately booted into the CWM recovery menu, in which i selected flash ROM, and scrolled down to choose slimICS.
i let it do its thing for a while, it jumped between the AT&T white logo screen and a screen with scrolling text for like 5-10 minutes, then just stayed on the AT&T logo screen for another ten minutes. i should have left it for maybe a half hour to be sure, but i figured the install failed. i couldn't get out of this so i pulled the batttery. and now the phone is bricked (soft i hope). if i hold the power button it goes to the AT&T white logo, flashes briefly for a half-second and goes back to the screen, then stays there indefinitely. no button combinations seem to work. does anyone have any suggestions?
thanks!
Since you backed everything up, I'd suggest flashing a stock rom via Odin or Heimdall to clean everything up before moving forwards.
You can flash a non-bootloader one to be safe, or if you want to make sure you can flash anything, flash a package with Gingerbread bootloaders.
jmtheiss said:
Since you backed everything up, I'd suggest flashing a stock rom via Odin or Heimdall to clean everything up before moving forwards.
You can flash a non-bootloader one to be safe, or if you want to make sure you can flash anything, flash a package with Gingerbread bootloaders.
Click to expand...
Click to collapse
how do i flash anything in my phone's current condition? it doesn't turn on fully. it's stuck at the white AT&T logo.
Turn it completely off (pull the battery, if necessary), then hold V+ and V-, and insert a USB cable. That should put it in download mode. Once you're there, you can flash a stock rom (There's a stick with those roms in the development section).
jmtheiss said:
Turn it completely off (pull the battery, if necessary), then hold V+ and V-, and insert a USB cable. That should put it in download mode. Once you're there, you can flash a stock rom (There's a stick with those roms in the development section).
Click to expand...
Click to collapse
doesn't work. as i mentioned in the OP, i can't get into download or recovery mode or whatever. these button combos have never ever worked with this phone. for example, holding + and - and inserting a cable with ODIN open has never done anything. that's why i used clockwork.
Sounds like u r gonna need a Jig. If u are on a pc, click on my sig link below and there u will find a link on how to make a jig and/or where to buy one.
4-2ndtwin said:
Sounds like u r gonna need a Jig. If u are on a pc, click on my sig link below and there u will find a link on how to make a jig and/or where to buy one.
Click to expand...
Click to collapse
is that guaranteed to work? or is it most likely? or is it unlikely at this point?
The jigs that I have made myself in the past and as well the professional made ones that I have purchased have always worked to get me into download mode.
The jig is worth a try, I suggest you should
if I'm reading the op right, and if memory serves firefly was an I9000 build and button combos are different. My suggestion would get the Odin kk4 one click with repartition and WITH boot loaders from 4-2ndtwin's sig links, open that and while powered off and holding just the vol- button insert the USB that should do the trick. I9000 builds use different boot loaders with different button combos. Since you will be flashing a boot loader package be aware this is when you can truly hard brick your device. Be sure you have a good connection and cable before starting. If you still can't get into download mode I can +1 on the jig. The jig and 4-2ndtwins one click has saved my bacon more than once.
ok so i bought the jig, and good news: it gets me into download mode! yay!
problem: i don't know where to go from here. i've tried the following:
A. after getting into download mode, i followed the ODIN method here: http://forum.xda-developers.com/showthread.php?t=1350266, meaning i flashed the gingerbread bootloader update (nothing happened to the phone, which made me confused when i got to step 7., because i was STILL IN download mode), then flashed the speedmod kernel (which reset the phone, but it just got stuck in the "SAMSUNG CAPTIVATE i-897" white text on black screen, forever. i had to do a battery pull. turning on the phone goes to the same screen and then it freezes. trying to hold all three buttons to go into recovery mode alternates between that screen and the white AT&T screen, actually alternates, forever if i let it.
B. after that failed, i tried using the 2.2 Heimdall one-click (http://forum.xda-developers.com/showthread.php?t=1266172) but the file, when run, says
Code:
ERROR: Drivers Not Found
Installing drivers
but i still followed the instructions (except the instructions say "Install driver" but the actual button is "Replace driver"?) in any case, this does nothing. and then checking off "Flash bootloaders" and doing it again does nothing. the phone remains in download mode.
C. so i wanted to try one-click downloader http://forum.xda-developers.com/showthread.php?t=731989, but nothing pops up on the ODIN window when i plug my phone in. i can't even do anything.
please help!
please, does nobody know what to do?
Take a look at the "Captivate Connection Issues" thread for some more things to try. At this point, it sounds like you need to clear all the phone drivers off of your machine and reinstall them.
jmtheiss said:
Take a look at the "Captivate Connection Issues" thread for some more things to try. At this point, it sounds like you need to clear all the phone drivers off of your machine and reinstall them.
Click to expand...
Click to collapse
thanks, that worked! (it was my laptop that was the source of the connection issues i think; i tried all that stuff in the thread, but when i switched to the desktop, all of a sudden ODIN recognizes the phone!) i got my phone to flash ODIN one-click. so now i'm back to stock 2.1 eclair.
however, much to my dismay, i still can't get into recovery mode to (re-) root. the three button combo still does the weird flashing thing, where the white AT&T logo shows up, then the screen goes to black, then the AT&T logo, then black... ad infinitum. how do i either 1) enter recovery, or 2) re-root the phone + get a nice, lean, fast, modern ROM on it without going into recovery?
so far this thread has helped me unbrick the phone, now all i need is to update it from stock!
spacenegroes said:
thanks, that worked! (it was my laptop that was the source of the connection issues i think; i tried all that stuff in the thread, but when i switched to the desktop, all of a sudden ODIN recognizes the phone!) i got my phone to flash ODIN one-click. so now i'm back to stock 2.1 eclair.
however, much to my dismay, i still can't get into recovery mode to (re-) root. the three button combo still does the weird flashing thing, where the white AT&T logo shows up, then the screen goes to black, then the AT&T logo, then black... ad infinitum. how do i either 1) enter recovery, or 2) re-root the phone + get a nice, lean, fast, modern ROM on it without going into recovery?
so far this thread has helped me unbrick the phone, now all i need is to update it from stock!
Click to expand...
Click to collapse
I could be wrong but when you do the 3 button combo it sounds like you are continually holding the buttons which will cause it to keep looping like you describe. Starting with your phone off hold down all three buttons. The phone will show the white ATT screen. Then if you had a custom kernel it would show the kernel splash screen, in your case you said it just goes black which is fine too. Then you will of course get the white ATT screen again. As soon as you see the white ATT screen again release all the buttons and that should boot it into recovery.
m1batt1 said:
I could be wrong but when you do the 3 button combo it sounds like you are continually holding the buttons which will cause it to keep looping like you describe. Starting with your phone off hold down all three buttons. The phone will show the white ATT screen. Then if you had a custom kernel it would show the kernel splash screen, in your case you said it just goes black which is fine too. Then you will of course get the white ATT screen again. As soon as you see the white ATT screen again release all the buttons and that should boot it into recovery.
Click to expand...
Click to collapse
i tried various durations of holding the buttons. none worked. 2nd AT&T logo, nope. 1st black screen, nope. 1st AT&T logo, nope.
Your gonna have to get ADB set up on your pc. Then... "adb reboot recovery" will get u into recovery mode.
Sent from my SGH-I897 using xda premium

Categories

Resources