Related
Is there a file in the android system that, sort of like an autoexec.bat, lists what to do on startup? For example forcing the system into recovery or download on power on?
I flashed the latest Vibrant firmware and did so with the option to repartition, which Im now finding out was not the right way to flash this one.
Long story short, it didnt contain the dbdata directory information and now, I am unable to boot and unable to get to download. I still have ADB access, it just isnt responding to ADB reboot download, it just comes right back up booting into recovery to flash the last stage of odin before it starts up.
Is there a way to force the phone back into download mode or force it to stop rebooting into recovery?
Pull battery out and USB to use the hardware buttons to manually get into download mode?
P.S. wrong forum
Aren't there some apps that can do that? I do it manually but like you said its not working for you, p.s im downloading that firmware
Sent from my SGH-T959 using XDA App
iwillkillyou said:
Aren't there some apps that can do that? I do it manually but like you said its not working for you, p.s im downloading that firmware
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
OP said that he isn't able to boot so I believe he's stuck on the loadup to Android.
zephiK said:
Pull battery out and USB to use the hardware buttons to manually get into download mode?
P.S. wrong forum
Click to expand...
Click to collapse
Manual buttons arent seemingly working, so far ive tried every conceivable combination of vol up down and power, even if all I do is plug the phone in Im back in recovery before the battery turns green.
(ps. I know, but I had a billion percent better chance not getting a mouthbreather response, despite the definite chance of flame posts lol)
Viralblack said:
Manual buttons arent seemingly working, so far ive tried every conceivable combination of vol up down and power, even if all I do is plug the phone in Im back in recovery before the battery turns green.
(ps. I know, but I had a billion percent better chance not getting a mouthbreather response, despite the definite chance of flame posts lol)
Click to expand...
Click to collapse
Try every step here: http://forum.xda-developers.com/showthread.php?t=771247
Have you successfully gotten into Download mode with hardware buttons before? Or are you one of those vibrants with "locked download?"
I have a feeling mines locked, Ive never used the buttons to successfully get into download mode, just adb reboot download
EDIT: Tried the posts suggestions, problem is second I plug in the USB and the battery pops up it goes right to recovery. Even if im holding the buttons before hand.
Viralblack said:
I have a feeling mines locked, Ive never used the buttons to successfully get into download mode, just adb reboot download
EDIT: Tried the posts suggestions, problem is second I plug in the USB and the battery pops up it goes right to recovery. Even if im holding the buttons before hand.
Click to expand...
Click to collapse
x_x don't know what to tell you then. With locked hardware, you have to be really careful because if something goes wrong you cant manually get back in there. Do you have Clockwork Recovery? try restoring to a previous nandroid backup.
zephiK said:
x_x don't know what to tell you then. With locked hardware, you have to be really careful because if something goes wrong you cant manually get back in there. Do you have Clockwork Recovery? try restoring to a previous nandroid backup.
Click to expand...
Click to collapse
I was working with that a bit, but it just kept getting to datadata and being unable to wipe or flash to it due to the odin botch. I tried wiping it clean and it just wouldnt let me do that to reflash.
So now im stuck at the samsung recovery screen without the ability to get into clockwork or flash lol
This smells like 130 bucks for a new phone I think... brick number two >.>
Viralblack said:
I was working with that a bit, but it just kept getting to datadata and being unable to wipe or flash to it due to the odin botch. I tried wiping it clean and it just wouldnt let me do that to reflash.
So now im stuck at the samsung recovery screen without the ability to get into clockwork or flash lol
This smells like 130 bucks for a new phone I think... brick number two >.>
Click to expand...
Click to collapse
Why did you change update.zip? Update.zip should always lead to Clockwork :|
zephiK said:
Why did you change update.zip? Update.zip should always lead to Clockwork :|
Click to expand...
Click to collapse
I didnt! But when I was formatting and it failed to reapply the nandroid completely cause of the section it couldnt mount, now when I hit reinstall packages it just reboots. Same with shell, it just yells at me and tells me to die in a fire.
if you didnt figure this out, the way to fix it is to first flash WITH ODIN the original JVD firmware and check repartition, then flash the new one IN ODIN without the repartition box checked.
first update includes the dbdata that the phone is looking for.
Yeah, I figured it out now, but Odin is seriously the devil if your phone doesnt have the hardware buttons enabled.
Now heres a question, if I can still get into stock recovery... is there a way to like, you know, recover using the stock system? lol
BUT THE GOOD NEWS IS that Tmo is letting me warranty out my phone for free, shipping me a new one, and gave me a loner while I wait.
TMo for the win.
Viralblack said:
BUT THE GOOD NEWS IS that Tmo is letting me warranty out my phone for free, shipping me a new one, and gave me a loner while I wait.
TMo for the win.
Click to expand...
Click to collapse
lol looks like you and I are in the same boat man. Hardware lock FTMFL. I have never been able to get into download mode, or recovery mode with the hardware keys, only with adb reboot recovery/download and terminal emulator app with SU privs. I wish there was a jumper we could reset to unlock it haha that'd be the s*# son. Good old pentium 133 in the palm of the hands, but no . Atleast they are taking care of the people who don't do things properly.
I did the same thing and ended up with the same problem, but i was able to get in into download mode. When i would plug it in it would try to boot into recovery after the battery screen i would use the keys to make it boot to download mode instead of recovery, it was a *****, but i got it, though idk if there is another way for people with locked down phones.
I have a Samsung Captivate and was able to sim unlock nd then root everything was running great, but because i wanted to change the rom and get rid of the AT&T bloatware I decided to install SRE rom from this site but first i had to install rom manager from the market, & install Clockwork Mod which i did so far so good. I go ahead watch the video follow it step by step except i didn't wipe data then install rom. So i decided to kinda start over i booted into recovery wiped data then attempted to install SRE rom again and that's when all hell broke loose phone freezing up on the home screen, not completing its boot process, rebooting by itself, i tried removing Sim card, Microsd, but still not allowing me to reboot into recovery with the key combo or ne other way for that matter. I then tried odin one click to reinstall factory everything but no luck. Sorry for the long story just trying to put it all out there. O yeah i'm a newb incase you couldn't tell. I don't have insurance to try to return to at&t. Thank you in advance for any and all help you may provide.
one_cam_vtec said:
I have a Samsung Captivate and was able to sim unlock nd then root everything was running great, but because i wanted to change the rom and get rid of the AT&T bloatware I decided to install SRE rom from this site but first i had to install rom manager from the market, & install Clockwork Mod which i did so far so good. I go ahead watch the video follow it step by step except i didn't wipe data then install rom. So i decided to kinda start over i booted into recovery wiped data then attempted to install SRE rom again and that's when all hell broke loose phone freezing up on the home screen, not completing its boot process, rebooting by itself, i tried removing Sim card, Microsd, but still not allowing me to reboot into recovery with the key combo or ne other way for that matter. I then tried odin one click to reinstall factory everything but no luck. Sorry for the long story just trying to put it all out there. O yeah i'm a newb incase you couldn't tell. I don't have insurance to try to return to at&t. Thank you in advance for any and all help you may provide.
Click to expand...
Click to collapse
try getting your phone into download mode. If you can do that then use odin to flash everything to stock.
Are you able to get adb to access the phone? You can access recovery from there with the following command:
Code:
adb reboot recovery
Also, are you getting into download mode when trying Odin 1-click? I've found a pretty fool-proof method pull battery/SIM/SD, putting the battery in, holding down the two volume buttons and then plugging in the USB. Works every time for me, and is easier than it sounds.
I was stuck on a boot loop the other night and that process got me into download mode so I could flash with Odin and then restore my backup.
Worst comes to worst, just bring it to AT&T and say it randomly did that. If it's only two days old, and you're under contract (didn't buy it outright) you don't need insurance. I don't even think insurance is available for this phone.
take out the battery, plug in the usb, put the battery back in, hold both volume buttons down, then hold the power button down... the grey/green battery icon will flash to a black screen, as soon as it flashes to the black screen the second time, let the power button go, and download mode should be there.
@rrrrrramos i do not have a contract with them. I obtained this phone through a friend that does have insurance for the handset. Since my computer does not recognize it i am not able to adb.
@magnumrt62 & rrrrramos I have tried these button, usb combos and nothing. I appreciate all the responses i will con't to try and seek psychiatric help...lol.
How would i know i am in dl mode? All it does when i let go of the power button after the second blk screen is nothing but show green battery nd con't to charge then goes to black screen. Computer doesn't recognize it.
Are you using the SRE with voodoo in it, if so that is not playing nice with ROM Manager, it is a known issue that Clockwork Mod dosen't recognize ext4. Sounds like that may be the issue. read this thread http://forum.xda-developers.com/showthread.php?t=784170
It sound like that is the problem.
I am unable to mount/unmount the internal/external sd cards because the phone freezes and does not allow for this. The few times i was able to get odin to recognize phone com3 i hit masterclear left it alone and 6hrs later it had done nothing. I can't even get into recovery mode. I am about to see if this beautiful phone will fly then bounce... O how a grown man wants to cry over his phone... LMAO... Can ne 1 close to orlando, kissimme, poincianna help a fellow Captivate lover out i got beer money, gas money, i'll drive too you. hell i'll even cook a new york strip or two.. HELP ME PLEASE..
To do master clear your have to be in usb debug mode and at the home screen. Fire up odin then plug the phone in odin will see the phone and then hit master clear. It will then wipe the phone
Sent from my Samsung Captivate w/Voodoo using XDA App
Thats where the phone freezes up at on the home screen and just stays stuck there. The last time I was able to get into the phone i switched on usb debugging but still nothing. I just booted up the phone and heard the sweet bing sound but still doesn't show up.. I really appreciate every1 taking time out to try to help me.. Just wanted to put that out there..
So am i one of the unfortunate souls to have "BRICKED" his phone. I will not give up yet.. As long as i see the sweet "S" i will not give up..
I don't think you bricked it. Something is going on with your drivers, if the computer won't recognize it. Obviously your phone has been able to boot into recovery before if you had ClockworkMod on it. Did you get into Recovery using the key combo?
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
You need to use the odin from here: http://forum.xda-developers.com/showthread.php?t=731989 as it is made to specifically use with the captivate. It also includes the jf6 kernael which is critical. I used method 3 for the I-9000 because SRE 1.3 put that kernel on the phone and screwed it up big time, it has different hardware assignments. When you put the battery in, hold volume up and down and plug in the usb, no sim, no external sd when doing this. No other version of odin worded for me, just this one. You can't do a master clear until you are fully booted, I don't care what anyone says, it will never work, besides, you don't need to. You need to hit the "Start" button in odin when it show that you're connected. It will reflash you phone with the proper rom and kernel.
Don't download anything else from there but the odin file, you have the drivers already and don't need the other kernels (what got you here to begin with ). just that version of odin that already has what you need.
Good luck man!
one_cam_vtec said:
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
Click to expand...
Click to collapse
It's great that you can get into recovery mode through adb because that means you can get into download mode: adb reboot download. Then you can flash back to stock with odin.
Also forget about recovery. That's not going to help you right now. You need to be in download mode to use Odin
I'm going to give that a shot when i get home. Why didn't I think about adb reboot download wow guess you can tell i'm a real NEWB.. Thanks i'll let u know how it works out for me..
one_cam_vtec said:
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
Click to expand...
Click to collapse
What is it that you don't understand. Master clear only works when you are at the home screen. You can't evoke it from download mode or recovery. You have to have your phone recognized by odin when you are at your home screen and then you can hit master clear. That is the only way that it will work.
It sounds like adb works so when you are at the home screen and you envoke adb reboot recovery it reboots the phone into recovery correct. If that is working then there should be no reason master clear won't work then. Boot the phone up normally and then run odin 1 click then plug the phone in if odin recognizes the phone then hit master clear and see what it does. It should work.
@ Everyone who suggested things for me to try THANK YOU. I finally got it with the adb reboot download. Didn't know i could do that. @Sparker366 I would envoke adb b4 it got to the home screen as soon as odin recognized it i would envoke commands, because the phone would freeze on me on the home screen Just didn't know about the "download" command. Thanks again every1...
I was at 2.1.1 Cognition and for some stupid reason went into ROM manager and tried to apply my original backup I did when I was just Rooted and on the stock software from ATT.
It got to the data partion and couldnt access it, rebooted and now I get force close errors when it boots. I can virtually do nothing cause the errors just come one after another.
I tried to go into download mode so I could use ODIN and start over and it will NOT go in download mode. I am holding the vol up and down and then pressing power. I am holding all three until the screen goes black twice then letting go of the power. It just goes back to the little circle in the middle meaning its charging.
I am hosed....please help me get this fixed!
The force closes comes from within android...its boots up but is unusable.
gocats7 said:
I was at 2.1.1 Cognition and for some stupid reason went into ROM manager and tried to apply my original backup I did when I was just Rooted and on the stock software from ATT.
It got to the data partion and couldnt access it, rebooted and now I get force close errors when it boots. I can virtually do nothing cause the errors just come one after another.
I tried to go into download mode so I could use ODIN and start over and it will NOT go in download mode. I am holding the vol up and down and then pressing power. I am holding all three until the screen goes black twice then letting go of the power. It just goes back to the little circle in the middle meaning its charging.
I am hosed....please help me get this fixed!
Click to expand...
Click to collapse
First of all, for God's sake please post on the RIGHT AREA. This is not develpoment....the mods are tired of saying the same thing and I dont see why is this so hard to understand.
Turn the phone off then Hold Vol Up and Down then plug the usb while holding those.
That is the way mine goes into download mode.
My bad, feel free to move it.
As I posted, I am doing that and cant get into download mode....please help and again sorry for posting to the wrong area. Im kinda freaking out.
Appologies again, I didnt read your post well.
I tried it the way you stated as well and it goes to the charging screen only.
When I post in the future I will pay more attention to where I post, I understand the frustration.
I cant go into recovery or download either one. Am I bricked? I could really, really use some help. I know I screwed it up and it was a great lession...I just dont want it to be a costly one.
1st question - were you able to get into either download mode or recovery mode via the button combos before you installed cognition?
2nd - if you let it boot up will it boot all the way to the lock screen?
1) Yes I was able to get into download mode and recovery mode before I screwed up.
2) Yes, I can get all the way to the lock screen and if i catch it just right I can navigate the os but it is almost impossible.
The backup from within ROM Manager I applied was back to the original OS that came on the phone that was rooted and had rom manager on it.
I would bet that whatever files allow you to get into download mode, etc are gone or something along those lines.
I am about to freak out.
have you tried pulling your battery, sim card, and any external sd card, let the phone set for a minute, then put back only the battery and then try either the recovery or download button combo?
I am able to get all the way to about phone and here is what it says. I have a combination of mess....man I screwed up royally.
Build Number
ECLAIR
Kernel Verson
2.6.29
[email protected] #237
BaseBand Version
I897UCJH7
Firmware Version
2.1 -Update 1
Again, I was on 2.1.2 Cognition and went through ROM manager and applied a backup which was a snapshot of my phone the day I got it, rooted it, and added ROM Manager. Which isnt there now.
I know what I did was really stupid, I know what I should have done. I would just really appreciate any help getting this back or getting it to a point that I could send it back and not get charged for it. I got it from amazon. Do you even think they would look at the file system? I am within my 30 day window.
Yes, it boots up normally meaning not into download or recovery mode. The specific errors I am getting in the os are as follows:
The process android.process.media has stopped unexpectedly and i have to click force close. I do get a few others about browser, phone, gallery, calendar, but in the end the media one is the one that comes up over and over. Since I can get this far surely there is a way to get me back to a workable state that I can fix it.
If not, I wonder if I could connect via usb and try to wipe every file off the darn thing and send it back? Obviously I would like to avoid that but I am running out of options and frankly this is over my head.
I dont think your trying the download mode correctly with the battery out. You need to take your battery out, put the battery back into the phone, hold down BOTH the volume up and down keys at the same time by pushing in the middle of the keys and then plug the usb into your phone. This works every time.
I can get into the phones Hard drive via USB and see the folders. I see .img files within clockwork that were suppose to have applied, not that it it matters.
I wonder if I could delete anything that isnt part of the stock image and send it back and just not be an idiot again? I really dont want to do that but I dont know what to do.
I found this log file on the device and the last line was the error that I got right before it rebooted and I was hosed:
Can't mount /data/!
Failure at line 2:
restore_rom /sdcard/clockworkmod/backup/original boot system data cache sd-ext
aNdroidnut I tried it exactly as described and all I get is the lines in a circle stating that its charging then the battery charging. I have tired it the way you said and the way I had done it all the other times.
I think the problem is i have an incomplete OS since it failed in the restore process within ROM Manager because I never should have done it that way.
If you were able to get into download via button combo before you should be able to do it now with after pulling your battery, sim card and external sd card as I mentioned before.
gocats7 said:
I can get into the phones Hard drive via USB and see the folders. I see .img files within clockwork that were suppose to have applied, not that it it matters.
I wonder if I could delete anything that isnt part of the stock image and send it back and just not be an idiot again? I really dont want to do that but I dont know what to do.
Click to expand...
Click to collapse
If you can get to this point you are not bricked and can recover. I am guessing you are connected to your computer in usb debuggin mode -- this is good as there is another way to get into download mode.
use oden3 one click here http://forum.xda-developers.com/showthread.php?t=731989
use download method one in the odin3 instructions if you can get connected to your computer in usb debugging mode. use download method 3 if you can get into download mode via the button combo after a battery pull
i think you failed at reading the warning:
disable the lagfix before trying to use clockwork
Are you trying this with Odin already open?
Sent from my SAMSUNG-SGH-I897 using XDA App
When I try what everybody else explains I too just go back to the loading circle. Then it just goes right back to my charging screen. I figured this method out by mere chance one night when tinkering. I haven't seen it posted anywhere, so hopefully this is what you need:
1) open odin
2) pull battery, sdcard, and sim card
3) plugin usb to phone and computer(NO BATTERY YET)
4) hold down vol up and vol down(NO POWER BUTTON)
5) place battery into the phone
This works every time for me no exceptions.
Hope this helps,
S4NDM4NN
OK, I have made progress thanks to the great tools these guys have and your help!
I am shaking as I type this (yea i know its just a phone). I was able via Odin to do a master clear. It rebooted and now I get into the OS and get NO errors. It seems fine but will not go into download mode no matter what I do and I have gone into it many times in the past. I went from stock (via Odin) to Cognition several times initially to really understand the process. I never had problems getting into download or recovery.
I really think, with you guys help, Im going to be ok here. I saw where you wanted me to do method 3. I have tried method 3 many times and method 2 many times.
Since I am able to get it to boot error free I was considering unrooting, rooting, downloading ROM Manager and trying to put Cognition 2.1.2 on it via Rom Manager. BUT before I do that I want advice if you would. Obviously following what I thought got me to this point to start with.
I have the Rogers Captivate - SGH-i896. I was following a tutorial on enabling tethering on my phone (on maggadget) but something went really wrong. I got Odin3 working, but when my captivate restarted, it got the a screen with "AT&T World Phone" and froze. I unplugged my phone and restarted it, but everytime I restart my phone, it shows the "I896 Samsung" screen then stays on the "AT&T World Phone" screen and doesn't do anything else.
I can still restart to go into download mode.
Have I just killed my phone? Does anyone have suggestions as to how I can get my phone back up?
flash another rom with Odin
would you point me to a good tutorial for that? thanks a bunch
Since you have download mode you are ok. You can get it back going using odin, but I am not aware of a Rogers-specific Odin flashable ROM.
I don't know what the 3-button combo situation is with the Rogers Captivate, but many AT&T Captivates lose it when flashed to stock, so I would not use the Odin one-click flasher on that phone, because if it disables download mode and doesn't work you'll be screwed. People are running the Cognition ROM on Rogers phones so you might try that. Beta 9.1.3 has an Odin flashable version. There is also an Odin version of the stock AT&T ROM with 3-button fix, which may work for you, at least temporarily.
If you get it to a point where you can install clockwork recovery on the phone, someone posted a nandroid backup of his Rogers phone here. (If you can get into recovery mode then you may be able to push a clockwork recovery to the phone via adb, e.g. "adb push update.zip /sdcard".) That backup hung my phone after the AT&T logo, but mine is an AT&T version and I ran the restore from a froyo build and I really don't know if one or both of those facts had anything to do with the failure.
What is "clockwork recovery"?
I will install the Cognition, thanks!
strawberrybanana said:
What is "clockwork recovery"?
I will install the Cognition, thanks!
Click to expand...
Click to collapse
Sounds like a good plan. Clockwork recovery is an enhanced recovery mode that has added functions.
I tried installing Cognition, but Odin3 won't detect my phone, now. Any suggestions?
strawberrybanana said:
I tried installing Cognition, but Odin3 won't detect my phone, now. Any suggestions?
Click to expand...
Click to collapse
Odin must be running before the phone is plugged in. Disconnect the phone from the computer. Start Odin (for some people right-clicking and running it as administrator is necessary to get it to work). Now put you phone in download mode by holding vol up+down and pluggin in the USB cable. It should detect in Odin.
f*ck yeah! cognition looks so good.
I read elsewhere that your browser sometimes interferes with Odin's detection of your phone. That was my case, thanks for your help <3
you can fix with odin but im not sure what you will need to do about unlocking, i read somewhere that people were haveing trouble with losing the unlock code after the froyo upgrade. it's not official so you may have trouble getting support from rogers or att. ive never unlocked a phone so i dont know what the details of doing so will be but i understand it is more common up in canada because of roaming charges.
there is are a few odin flashable att roms that can be rooted, clockwork mod recovery installed and a cognition eclair version can be used. id do a search of unlock threads on the forum first and see what people have to say about froyo if unlocking is something you are interested in.
I had the same thing. I disconnected the cable, held the power, v+ and V- buttons, the screen went blank and then released the volume buttons. Its all good now!
Now my phone is not detecting the 3g network. I think it has something to do with using at & t rom while on a rogers net work.any ideas?
strawberrybanana said:
Now my phone is not detecting the 3g network. I think it has something to do with using at & t rom while on a rogers net work.any ideas?
Click to expand...
Click to collapse
You have to manually enter your Rogers APN from settings -> wireless networks -> mobile networks -> access point names. Search up "Rogers APN android" and I think it's the first one that pops up.
Yes, got it working. No need for my apartment internet connection now that I can use Mobile AP and USB Tethering!
Download mode not working...
I have the Rogers Captivate I896 and I'm still stuck on the situation where download mode does not work. This happened after I tried flashing one of the froyo firmwares for the I897 version of the phone.
Whenever I press the volume up and down buttons together and plug in the usb cable, only the battery icon shows greyed out with the loading circle. I've tried going into recovery mode pressing both buttons and the power button, the only thing that happens is the at&t welcome screen shows but keeps looping.
Is it possible that I bricked my phone? If so, would I be able to bring it back to Rogers even though it shows the at&t boot screen? I have bought the phone two weeks ago, so I'm still under the one moth warranty.
Any help would be much appreciated. Thanks in advance
deadly0ne said:
I have the Rogers Captivate I896 and I'm still stuck on the situation where download mode does not work. This happened after I tried flashing one of the froyo firmwares for the I897 version of the phone.
Whenever I press the volume up and down buttons together and plug in the usb cable, only the battery icon shows greyed out with the loading circle. I've tried going into recovery mode pressing both buttons and the power button, the only thing that happens is the at&t welcome screen shows but keeps looping.
Is it possible that I bricked my phone? If so, would I be able to bring it back to Rogers even though it shows the at&t boot screen? I have bought the phone two weeks ago, so I'm still under the one moth warranty.
Any help would be much appreciated. Thanks in advance
Click to expand...
Click to collapse
IM at your EXACT situation.
CAN SOMEONE please help
DrunkenWonton said:
IM at your EXACT situation.
CAN SOMEONE please help
Click to expand...
Click to collapse
This might help you get out of the situation.
hey_joe said:
This might help you get out of the situation.
Click to expand...
Click to collapse
Hey, thanks for the link. I've read the instructions and it seems that the phone would still need to be able to get to the "PC ! Phone" logo. And I am not able to get to that on my phone.
I'll still try it, however, I don't have a spare micro usb with me at the moment. Does anyone have any alternative methods before I go through this?
deadly0ne said:
Hey, thanks for the link. I've read the instructions and it seems that the phone would still need to be able to get to the "PC ! Phone" logo. And I am not able to get to that on my phone.
I'll still try it, however, I don't have a spare micro usb with me at the moment. Does anyone have any alternative methods before I go through this?
Click to expand...
Click to collapse
Based on my observation reading through that thread, as long as your phone powers up, there's a very good chance you can get it into download mode using the jig. The only time the jig doesn't work is when your phone's screen is completely blank no matter which which button you press.
If you have the phone connected to a usb cable and its rebooting wait till you hear the usb connected sound on your pc after the att logo screen, then send a "adb reboot recovery" or "adb reboot download" command and it will reboot and go into recovery or download mode. Usb debugging has to be enabled though.
hey all, i've had my captivate for about two years now, and for a while i used cognition, then for the last year i've been using firefly. firefly has completely destroyed my phone's speed and responsiveness, and i needed to clean everything off and start with a minimalist ROM. so i picked slimICS.
i'm still very hazy on the details and terminology of flashing ROMs, but i got two to work (i remember using one-click root thing in 2010, and then in 2011 i flashed firefly through clockwork) so i figured it shouldn't be a problem to install slim, which i figured would be my last ROM until next year, when i'd get a new phone.
so i backed up my stuff, tried to get into recovery mode with the 3 buttons (didn't work, unsurprising since it didn't work last year either), took out my SIM, went to CWM, and selected the flash rom option. this restarted the phone and sent it into recovery mode--except it was the stock recovery, and i couldn't select anything because i think firefly made the phone think it was the i9000 model from canada, instead of the i897 captivate, so it assumed i had a physical "ok" button on my phone (which i obviously do not). i tried the power button, the various capacitive buttons on the bottom, nothing would select any of the options, so i just took out the battery and put it back in. the phone immediately booted into the CWM recovery menu, in which i selected flash ROM, and scrolled down to choose slimICS.
i let it do its thing for a while, it jumped between the AT&T white logo screen and a screen with scrolling text for like 5-10 minutes, then just stayed on the AT&T logo screen for another ten minutes. i should have left it for maybe a half hour to be sure, but i figured the install failed. i couldn't get out of this so i pulled the batttery. and now the phone is bricked (soft i hope). if i hold the power button it goes to the AT&T white logo, flashes briefly for a half-second and goes back to the screen, then stays there indefinitely. no button combinations seem to work. does anyone have any suggestions?
thanks!
Since you backed everything up, I'd suggest flashing a stock rom via Odin or Heimdall to clean everything up before moving forwards.
You can flash a non-bootloader one to be safe, or if you want to make sure you can flash anything, flash a package with Gingerbread bootloaders.
jmtheiss said:
Since you backed everything up, I'd suggest flashing a stock rom via Odin or Heimdall to clean everything up before moving forwards.
You can flash a non-bootloader one to be safe, or if you want to make sure you can flash anything, flash a package with Gingerbread bootloaders.
Click to expand...
Click to collapse
how do i flash anything in my phone's current condition? it doesn't turn on fully. it's stuck at the white AT&T logo.
Turn it completely off (pull the battery, if necessary), then hold V+ and V-, and insert a USB cable. That should put it in download mode. Once you're there, you can flash a stock rom (There's a stick with those roms in the development section).
jmtheiss said:
Turn it completely off (pull the battery, if necessary), then hold V+ and V-, and insert a USB cable. That should put it in download mode. Once you're there, you can flash a stock rom (There's a stick with those roms in the development section).
Click to expand...
Click to collapse
doesn't work. as i mentioned in the OP, i can't get into download or recovery mode or whatever. these button combos have never ever worked with this phone. for example, holding + and - and inserting a cable with ODIN open has never done anything. that's why i used clockwork.
Sounds like u r gonna need a Jig. If u are on a pc, click on my sig link below and there u will find a link on how to make a jig and/or where to buy one.
4-2ndtwin said:
Sounds like u r gonna need a Jig. If u are on a pc, click on my sig link below and there u will find a link on how to make a jig and/or where to buy one.
Click to expand...
Click to collapse
is that guaranteed to work? or is it most likely? or is it unlikely at this point?
The jigs that I have made myself in the past and as well the professional made ones that I have purchased have always worked to get me into download mode.
The jig is worth a try, I suggest you should
if I'm reading the op right, and if memory serves firefly was an I9000 build and button combos are different. My suggestion would get the Odin kk4 one click with repartition and WITH boot loaders from 4-2ndtwin's sig links, open that and while powered off and holding just the vol- button insert the USB that should do the trick. I9000 builds use different boot loaders with different button combos. Since you will be flashing a boot loader package be aware this is when you can truly hard brick your device. Be sure you have a good connection and cable before starting. If you still can't get into download mode I can +1 on the jig. The jig and 4-2ndtwins one click has saved my bacon more than once.
ok so i bought the jig, and good news: it gets me into download mode! yay!
problem: i don't know where to go from here. i've tried the following:
A. after getting into download mode, i followed the ODIN method here: http://forum.xda-developers.com/showthread.php?t=1350266, meaning i flashed the gingerbread bootloader update (nothing happened to the phone, which made me confused when i got to step 7., because i was STILL IN download mode), then flashed the speedmod kernel (which reset the phone, but it just got stuck in the "SAMSUNG CAPTIVATE i-897" white text on black screen, forever. i had to do a battery pull. turning on the phone goes to the same screen and then it freezes. trying to hold all three buttons to go into recovery mode alternates between that screen and the white AT&T screen, actually alternates, forever if i let it.
B. after that failed, i tried using the 2.2 Heimdall one-click (http://forum.xda-developers.com/showthread.php?t=1266172) but the file, when run, says
Code:
ERROR: Drivers Not Found
Installing drivers
but i still followed the instructions (except the instructions say "Install driver" but the actual button is "Replace driver"?) in any case, this does nothing. and then checking off "Flash bootloaders" and doing it again does nothing. the phone remains in download mode.
C. so i wanted to try one-click downloader http://forum.xda-developers.com/showthread.php?t=731989, but nothing pops up on the ODIN window when i plug my phone in. i can't even do anything.
please help!
please, does nobody know what to do?
Take a look at the "Captivate Connection Issues" thread for some more things to try. At this point, it sounds like you need to clear all the phone drivers off of your machine and reinstall them.
jmtheiss said:
Take a look at the "Captivate Connection Issues" thread for some more things to try. At this point, it sounds like you need to clear all the phone drivers off of your machine and reinstall them.
Click to expand...
Click to collapse
thanks, that worked! (it was my laptop that was the source of the connection issues i think; i tried all that stuff in the thread, but when i switched to the desktop, all of a sudden ODIN recognizes the phone!) i got my phone to flash ODIN one-click. so now i'm back to stock 2.1 eclair.
however, much to my dismay, i still can't get into recovery mode to (re-) root. the three button combo still does the weird flashing thing, where the white AT&T logo shows up, then the screen goes to black, then the AT&T logo, then black... ad infinitum. how do i either 1) enter recovery, or 2) re-root the phone + get a nice, lean, fast, modern ROM on it without going into recovery?
so far this thread has helped me unbrick the phone, now all i need is to update it from stock!
spacenegroes said:
thanks, that worked! (it was my laptop that was the source of the connection issues i think; i tried all that stuff in the thread, but when i switched to the desktop, all of a sudden ODIN recognizes the phone!) i got my phone to flash ODIN one-click. so now i'm back to stock 2.1 eclair.
however, much to my dismay, i still can't get into recovery mode to (re-) root. the three button combo still does the weird flashing thing, where the white AT&T logo shows up, then the screen goes to black, then the AT&T logo, then black... ad infinitum. how do i either 1) enter recovery, or 2) re-root the phone + get a nice, lean, fast, modern ROM on it without going into recovery?
so far this thread has helped me unbrick the phone, now all i need is to update it from stock!
Click to expand...
Click to collapse
I could be wrong but when you do the 3 button combo it sounds like you are continually holding the buttons which will cause it to keep looping like you describe. Starting with your phone off hold down all three buttons. The phone will show the white ATT screen. Then if you had a custom kernel it would show the kernel splash screen, in your case you said it just goes black which is fine too. Then you will of course get the white ATT screen again. As soon as you see the white ATT screen again release all the buttons and that should boot it into recovery.
m1batt1 said:
I could be wrong but when you do the 3 button combo it sounds like you are continually holding the buttons which will cause it to keep looping like you describe. Starting with your phone off hold down all three buttons. The phone will show the white ATT screen. Then if you had a custom kernel it would show the kernel splash screen, in your case you said it just goes black which is fine too. Then you will of course get the white ATT screen again. As soon as you see the white ATT screen again release all the buttons and that should boot it into recovery.
Click to expand...
Click to collapse
i tried various durations of holding the buttons. none worked. 2nd AT&T logo, nope. 1st black screen, nope. 1st AT&T logo, nope.
Your gonna have to get ADB set up on your pc. Then... "adb reboot recovery" will get u into recovery mode.
Sent from my SGH-I897 using xda premium