Related
How would I strip just the battery icon(s) used in a particular theme? I haven't been successful with my research on how to do so. Thanks in adavnce.
Just extract framework-res.apk in framework folder.
Then look in /res/drawable
d750 said:
Just extract framework-res.apk in framework folder.
Click to expand...
Click to collapse
I just tried to do this and replaced the battery icons in the ROM.zip file I had, then tried to use a autosign.bat to resign the ROM.zip file, tried to reflash, and ended up hanging my phone at the boot screen + having to do a nandroid restore.
Would you happen to know the correct process for replacing JUST the battery icons on the phone itself using the framework-res.apk?
something like adb push /system/framework-res.apk?
Neejay said:
I just tried to do this and replaced the battery icons in the ROM.zip file I had, then tried to use a autosign.bat to resign the ROM.zip file, tried to reflash, and ended up hanging my phone at the boot screen + having to do a nandroid restore.
Would you happen to know the correct process for replacing JUST the battery icons on the phone itself using the framework-res.apk?
something like adb push /system/framework-res.apk?
Click to expand...
Click to collapse
I would make a metamorph, there simple to do and will get what you want done
I ended up just changing the apk to zip, replacing the .png files, changing the extension back to apk, and just using adb to copy the framework-res.apk back to the phone.
If you want i make it for you send me framework-res.apk and battery icons.
Where would you find the keyboards so I can get a different one. The one I have is very hard on my eyes...
ok i have exhausted my brain with trying to get into all this by myself. All i want to do is change the drawable's and push them back to my phone. I started small by pulling my HtcClockWidget.apk. I pulled res folder edited some imgs and put folder back in. I have also rm via sdk my origanal one from /system/app i cant for the life of me figure out how to open new one back up. I used Freshkitchen to push file back becuase i couldnt do it myself via adb and here i am now. Why cant i open or install this apk. is it becuase of its location in the system? i sure could use a little friendly help. pm or [No1ukno1357 at aol thnks. If i even posted this in right place. I have about ten diff browsers open trying things so i did search before posting lol. ***I did rm old one first.***
adb remount
adb push HtcClockWidget.apk /system/app/
adb reboot
Does that not work ?
-------------------------------------
Sent from my HERO200
well its booting up we will see lol
well it is now pushed to there but how do you install its not own my widgets list anymore and using esfileexplore wont let you touch them pretty much. my logcat is going absolutly nuts lol ok well it loaded it back up but my changes were not made looks the same lol. going to double check that it was correct one i put back in there
did you remove the apk you edited out of your system before pushing it back?
i use this command when i putting apks back into system.
# install /sdcard/HtcClockWidget.apk /system/app/
Some of the widget files are located in com.htc.resources.apk
no1ukno1357 said:
ok i have exhausted my brain with trying to get into all this by myself. All i want to do is change the drawable's and push them back to my phone. I started small by pulling my HtcClockWidget.apk. I pulled res folder edited some imgs and put folder back in. I have also rm via sdk my origanal one from /system/app i cant for the life of me figure out how to open new one back up. I used Freshkitchen to push file back becuase i couldnt do it myself via adb and here i am now. Why cant i open or install this apk. is it becuase of its location in the system? i sure could use a little friendly help. pm or [No1ukno1357 at aol thnks. If i even posted this in right place. I have about ten diff browsers open trying things so i did search before posting lol.
Click to expand...
Click to collapse
why dont u just put the apk into a zip file then use pre kitchen to sign it and then flash it. also some of the backgrounds are in htcresources apk found in the framworks of roms
yes it did install I think I may have edited some of the wrong pics for the clock I wanted. I also was also trying to push file from desktop. lol I sure do appreciate every ones help.
Sent from my HERO
is there a way to hide the android battery status or display the % on it? there are plenty of apps that show % but its kinda redundant to have both displaying on the task bar.
i am runing rooted stock rom. any ideas are apreciated, thanks
You can do both with CyanogenMod. Or you can just replace the images in framework-res.apk
Here is a red round battery with percentages:
thanks everyone
thank you, i just deleted the images from framework-res and installed a battery indicator from market. so now i have 1 battery with correct %. too bad i cant move it to the right
dkhait said:
thank you, i just deleted the images from framework-res and installed a battery indicator from market. so now i have 1 battery with correct %. too bad i cant move it to the right
Click to expand...
Click to collapse
How do you do this? Do you copy the original framework-res.apk to PC and then open and remove the battery pictures then move the modified framework-res.apk back to the device and install? I tried this but the apk wont install.
nfcrockett said:
Here is a red round battery with percentages:
Click to expand...
Click to collapse
How do you install this file? I tried installing it from clockwork mod recovery, but it didn't take.
Asterdroid said:
How do you install this file? I tried installing it from clockwork mod recovery, but it didn't take.
Click to expand...
Click to collapse
you cant install that file. you have to pull framework-res.apk from the /system/framework. then open it with 7zip and overwrite the exiting images with those. then push it back into the phone.
adb pull /system/framework/framework-res.apk
then after injecting new images
adb push framework-res.apk /system/framework/
dkhait said:
you cant install that file. you have to pull framework-res.apk from the /system/framework. then open it with 7zip and overwrite the exiting images with those. then push it back into the phone.
adb pull /system/framework/framework-res.apk
then after injecting new images
adb push framework-res.apk /system/framework/
Click to expand...
Click to collapse
Worked like a charm. Thanks!
Any idea where I can get my hands on red-themed 3g/location/clock/wifi/gps/alarm etc. notification icons?
I can't get the file to push. I am connected via USB with USB debugging on in charge only mode. At CMD prompt I can adb shell and su.
adb push framework-res.apk /system/framework/
gives error adb: not found
I have edited the file by removing some png and then saving it back to the sdk root and the sdk/tools folders.
If I get this to push do you have to then install the apk from the device?
wpbear said:
do you have to then install the apk from the device?
Click to expand...
Click to collapse
-Install 7zip (just google it)
-Reboot phone into recovery.
-Connect USB cable
-Go into Partitions menu in recovery
-Mount /System
-Open your command prompt on your PC
-Change the directory to wherever your sdk/tools are located
-type the following command line: adb pull /system/framework/framework-res.apk
Now the file is in your sdk/tools folder
-Right click on framework-res.apk and open with 7zip
-Copy the files from the round battery zip folder to the corresponding folder with the 7zip archive. They will automatically overwrite
-Exit 7zip
-Back in the command prompt type the following command line: adb push framework-res.apk /system/framework/
-On your phone, unmount /system, then back out of the partitions menu and reboot your phone.
Should be all set!
wpbear said:
I can't get the file to push. I am connected via USB with USB debugging on in charge only mode. At CMD prompt I can adb shell and su.
adb push framework-res.apk /system/framework/
gives error adb: not found
If I get this to push do you have to then install the apk from the device?
Click to expand...
Click to collapse
I think you need to mount the system folder in the partitions menu of recovery. My instructions are one post up.
Thanks got it. I switched back to the orignal apk though. I wanted the status hidden, and while deleting the png worked, it still leaves a blank space instead of moving the icons over so it doens't look good. Thanks for the help.
nfcrockett said:
Here is a red round battery with percentages:
Click to expand...
Click to collapse
I really like this icon, but is there any way to use this without the percentages in the middle? It makes it look more cluttered, and it's not very useful as they only change between 100, 80, 60, etc.
So is there any way to either make them more accurate, or remove them completely? I really like this indicator otherwise, more neat-looking than the one that comes with the jonnybueno theme (which rocks otherwise!)
Thanks all.
I made a white round battery meter if you don't care for the red.
Why can't this be packaged up into a zip for us to just go into recovery and clockwork and install zip. Don't really understand why we have to go through all the steps of adb to get this to work. So if possible could someone please put it all together to make it easier to use. Thanks
wpbear said:
How do you do this? Do you copy the original framework-res.apk to PC and then open and remove the battery pictures then move the modified framework-res.apk back to the device and install? I tried this but the apk wont install.
Click to expand...
Click to collapse
you cant install it, you have to overwrite it in recovery mode.
adb pull /system/framework/framework-res.apk
modify
then
adb push framework-res.apk /system/framework/
corywf said:
I made a white round battery meter if you don't care for the red.
Click to expand...
Click to collapse
Is there one for blue please?
What color blue do you want? Just regular blue?
WingHater said:
Why can't this be packaged up into a zip for us to just go into recovery and clockwork and install zip. Don't really understand why we have to go through all the steps of adb to get this to work. So if possible could someone please put it all together to make it easier to use. Thanks
Click to expand...
Click to collapse
It probably could be packaged, but it is a pretty simple change so I doubt anyone would go through the trouble.
Do not fear ADB. Follow the steps. It is as easy as 1. 2. 3... 4567.
nfcrockett said:
Here is a red round battery with percentages:
Click to expand...
Click to collapse
Is there anyway to do this so it is like the old days where a zip could be installed through clockwork recovery? I hate doing anything through ABD half the time my phone is not recognized?
Like the title says, this is how to modify your Notification title drawer on the Captivate with Froyo like Tatuyama's theme's drawer(notification slide) for the i9000. This will tell you how to make it transparent and add a graphic or change the colors. This has been tested on Cog B7, dont think it works on i9000 roms like Shep's. I can help you though on this if you absolutely are dieing to do it. It will just take a little fandanglin and searching but can be done. I ripped apart Shep's rom and found all of Tat's mods, I jsut dont remember them off the top of my head..
I have also attached the drop bars from Tat's theme and another black AOSP bar should you want to use it. I have also included a PSD file to modify to your liking, my APK's for the frameworks I edited below (these include the tat icons already inside), a blank black background bar to use should you want, and other goodies for your modding needs. I have also slapped some screenies below to get an idea of wtf I am even talking about. Also if you use my Frameworks be aware that I am using the battery mod version "I" from that one thread, injected Tat's icons and goodies, and other MISC things.
I will try to do this as simple as possible. I dont linger in the themes area so you are pretty much on your own. I am going to write this tutorial based on Windows O/S and Adobe Photoshop. Attempt this at your own risk. If you biff it up its not my fault. I wrote the directions as I did it, and I am working great with awesome sauce dripping from my phone. I cannot be held responsible if you are below par of the preqs listed. I assume if you are going to attempt it you are competent and comfortable with all things required. However, should you somehow mess up, I do provide some SYA (save your ass) directions below. That being said, Good luck and Mod On!
Prerequisites:
1) ADB Dev Kit and experience using it (push, pull, shell)
2) Photoshop or other photo editing software & experience
3) Basic Windows experience: cut/copy/paste/rename/zipping/moving files. (if you use linux you shouldnt worry as you more than likely are a power user already and can cross apply).
Step 1: We need to download the APK's off the phone and get them ready for editing (or yank them out of the ROM package you download).
1) open a CMD (command prompt) window type:
adb pull /system/framework/twframework-res.apk C:\
adb pull /system/framework/framework-res.apk C:\This will save the files to your root of C:. Should you want to do it elsewhere you can specify or else leave it blank and it will stick the files in your developer kit folder.
2) (OPTIONAL BUT RECOMMENDED! STEP) Navigate to where you saved the files, right click and copy/paste to make a set of backups of these files.
3) Rename the .apk to .zip files. You can also associate your .apk to a program like WinRAR or WinZIP instead. This will open APK Files by default or optional secondary(open with). This makes the whole thing a lot easier as you can open the file(APK) and leave it up, make the edits and drop them directly back into the APK. KEEP FILE STRUCTURE PROPER!
4) Extract the APK files to seperate folders or dig out the below files for editing.
Step 2: Editing the proper files.
1) Navigate to twframework.apk's extracted folder from above or these files you extracted.
2) Find and open sub folder /res/
3) Once in /res/ find and open /drawable-hdpi/
4) Once in /drawable-hdpi/ locate the following files:
- status_bar_background.9.png (actual background of the drawer)
- status_bar_header_background.png (this is the 5 icons across the top of drawer)
- status_bar_close_on.png (this is the dropdown bar at the bottom of drawer)
- quick_panel_list_bg_01.9 (seperator between carrier and application info)
5) Open these files in Photoshop(or another editor)
6) Verify these are set to RGB not Index color mode so you can edit them.
7) Edit the layers to make them transparent. If there are not layers, right click and "create layer from background". You can then edit your layer settings. I set mine to 75% transparency in Photoshop, the actual background to 85% to darken it up a little. This will take some tweaking to get it just perfect for you. Make sure you save them in .png format with the same name they started with and not the PSD or "copy". Also you want non interlaced if it prompts you.
8) Do the same steps for the framework-res.apk.
- status_bar_item_app_background_normal.9.png (not sure if this one is necessary)
- status_bar_item_background_normal.9.png (this is teh notifications)
Step 3: Put it together and upload.
After you update the files, you will need to inject them back ito the APK's where you got them (/res/drawable-hdpi/). You can do this by opening the APK with Winzip/WinRAR/7zip and put them in there or if you extracted the entire contents just zip it all back up. You will need to remove the .zip extension if you went that route. Also, make sure you open it after zipping and verify it maintains the correct structure or you will be doing the recovery shuffle after you reboot. If you see only 1 folder in your zip this is WRONG! You need to see assets, RES, META-INF, and 2 other files in there(manifests and resources). If you see all these then you are ready to rock and roll.
After you get them back together upload them to your device using:
adb push <location of apk you edited>\framework-res.apk /sdcard/
adb push <location of apk you edited>\twframework-res.apk /sdcard/
then in teh same command prompt window (or another, whatever)
adb shell
su
cd sdcard
cp twframework-res.apk /system/framework/twframework-res.apk
cp framework-res.apk /system/framework/framework-res.apk
reboot
It shouldnt take but a second to come back up. You are done.
It may take a little bit of editing of the files to get them to look OK. I spent most of my day today getting mine together. You can use them if you like the "hootie edition" or just edit your own.
SEE POST #6 IF SOMETHING GOES HORRIBLY WRONG!!!!!
Screenies:
http://www.wtfokc.com/sef****/snapshot-1.pnghttp://www.wtfokc.com/sef****/snapshot-2.pnghttp://www.wtfokc.com/sef****/snapshot-3.png
That looks fantastic. I want your notification drop down and all minus the owl of course and text, but can this be done by using metamorph instead of having to adb everything?
awsome write up. Looks pretty simple and I will attempt this when I get home today.
This is an absolutely EXCELLENT tutorial. Props to you. I will be doing this shortly to all my Captivates in the house, 3 in use, plus the 4th one I'm using as a Dev phone.
Hi,
I've followed your instructions. After the files have been pushed up, my phone goes through the usual errors due to the framework change. The problem I'm having is that after I restart my phone, the phone gets past the galaxy s screen, but then it goes black and does not respond. Any suggestions?
smeltn said:
That looks fantastic. I want your notification drop down and all minus the owl of course and text, but can this be done by using metamorph instead of having to adb everything?
Click to expand...
Click to collapse
To be honest I have never used metamorph on the Captivate. On my G1 yes you could acheive that. I googled the metamorph tutorial Junkdruggler did and it looks rather lengthy and involved editing XML files. You can find that info here. Also, the files you would need to do my way with just a blank one are above. Just download the closebars zip and the "blank" zip. Then mod/inject your APK - or hell mine from above- and push it to your device. This is a rather quick ordeal.
thehavock18 said:
awsome write up. Looks pretty simple and I will attempt this when I get home today.
Click to expand...
Click to collapse
miztaken1312 said:
This is an absolutely EXCELLENT tutorial. Props to you. I will be doing this shortly to all my Captivates in the house, 3 in use, plus the 4th one I'm using as a Dev phone.
Click to expand...
Click to collapse
Thanks guys, took me a little while to figure it all out and a lot of framework pushing to get it just right Let me know how it turns out for you! Hell post some screenshots when you are done. I want to see them
gangpe said:
Hi,
I've followed your instructions. After the files have been pushed up, my phone goes through the usual errors due to the framework change. The problem I'm having is that after I restart my phone, the phone gets past the galaxy s screen, but then it goes black and does not respond. Any suggestions?
Click to expand...
Click to collapse
THIS IS HOW TO SAVE YOURSELF
Well, not sure what you mean "usual errors" with framework change? I havent ever had any issues with the framework replacements. I occasionally have then crash if I replace them while phone is on and not in recovery. A reboot fixes this though. Are you using a Cap rom or an I9000? This doesnt work on I9000 roms as thier APK's are slightly different- teh HDPI folder has a v4 at the end (IIRC). I can help you through this though if that's the case..
If it truly is a cap rom, I did experience a similar problem on my phone one time when I pushed the framework.apk. What had happened is I right-clicked the ROOT directory I had placed all the files in and said to zip it. This caused the folder to be INSIDE the zip. So the file structure went like this:
>>ZIP FILE I CREATED>>
--------->>FOLDER ALL FILES WERE IN>>
------------------>>FILE STRUCTURE OF THE ORIGINAL APK>>
Which should have been
>>ZIP FILE I CREATED>>
--------->>FILE STRUCTURE OF ORIGINAL APK>>
To better explain it- If you open the zip you created, do you see the RES folder, META-INF folder, assets folder, and then there will be 2 other files? Or do you see 1 single folder? If you see 1 single folder you zipped it up incorrectly. You will need to go into the folder and select all-> right click-> zip (send to-> compressed folder). This should fix it. If this isnt the case something else went horribly wrong. To fix it we will need to restore the original files you hopefully backed up. If you didnt back up you still arent totally hosed- just redownload the ROM you are running, open it up and navigate to the /system/framework folder and pull out the original frameworks. Then follow these instructions to get them back on the device.
Step 1:
A quick way to get out of this situation is to take the copies rename them back to twframework-res.apk and framework-res.apk (or pull from the original rom package as mentioned above).
Hopefully you have the 2e recovery kernel, as you need it to get back to where you started. If you cant do clockwork, well you may as well odin cause you are a few flashes behind anyway.
K, so first you will need to download the update.zip I have included with this post. This is the clockwork recovery file. You will next need to put your phone in reocvery mode. to do this do:
adb reboot recovery
Step 2:
Next you will need push that file you downloaded to your SD. to do that you need to:
adb push <location of downloaded>\update.zip /sdcard/
Now, once in recovery- tell it to reinstall packages. This may reboot the phone. If it does, tell it to reinstall packages again. This should get you to clockwork recovery.
Step 3:
once you have a green clockwork recovery screen, you will get the chance to SU via ADB SHELL. You can then repeat the pushing of your ORIGINAL fles back to your phone and retry the process.
You could also pull the files you pushed to see what went wrong- but do that first as if you push before they will be overwritten with the original files.
Looking into doing a little custom work but before I do. Like Tat's theme do you need to edit XML files for specific things like the pop ups being black. Or do I just get the naming right and put the proper PNG in the apk.
thehavock18 said:
Looking into doing a little custom work but before I do. Like Tat's theme do you need to edit XML files for specific things like the pop ups being black. Or do I just get the naming right and put the proper PNG in the apk.
Click to expand...
Click to collapse
This is only for the notification drawer and not the actual pop ups. If you want to edit the popups you will need to edit the XML files.
Thanks for the quick response. I might have to dive into all the XML edits.
thehavock18 said:
Thanks for the quick response. I might have to dive into all the XML edits.
Click to expand...
Click to collapse
If you do post a how to thread cause I would like to know how myself
status_bar_background.9.png (actual background of the drawer)
If I ONLY wanted to make the pull-down menu background transparent the above file would be the only one that I need to mod... correct??
jslee1020 said:
status_bar_background.9.png (actual background of the drawer)
If I ONLY wanted to make the pull-down menu background transparent the above file would be the only one that I need to mod... correct??
Click to expand...
Click to collapse
That is correct.
The one problem though is the AT&T (carrier part) at the top is also transparent and you quickly notice it looks a little strange with your items not transparent. I tried to live with it for a little bit but ended up modding the rest too.
malfuncion said:
That is correct.
The one problem though is the AT&T (carrier part) at the top is also transparent and you quickly notice it looks a little strange with your items not transparent. I tried to live with it for a little bit but ended up modding the rest too.
Click to expand...
Click to collapse
quick_panel_list_bg_01.9 (seperator between carrier and application info)
is this the file for the AT&T carrier part??
The quick panel is actually the part that says "Notifications" or "On Going" below the AT&T part. THe AT&T and clear button is part of the actual background peice. So what happens is the AT&T part becomes transparent, while the notification peices are solid. It may not bother you but it bugged the crap out of me. It's personal preference really..
malfuncion said:
The quick panel is actually the part that says "Notifications" or "On Going" below the AT&T part. THe AT&T and clear button is part of the actual background peice. So what happens is the AT&T part becomes transparent, while the notification peices are solid. It may not bother you but it bugged the crap out of me. It's personal preference really..
Click to expand...
Click to collapse
I get it. Well I'll try it out and see... I guess no better way to learn then to experience it first hand Thanks!
I was able to take the Cog Beta 7 framwork and Tat's framwork. I pulled out all the changes from his theme and put them in cog beta 7. I actually did not have to edit any files and was able to apply it.
I had to change a few file names around so all the backgrounds / pop ups applied to the theme. I left DG's background.
I don't want to post it since it is not my own work but if you want to take a look at the framwork and twframwork I can send them PM.
notification bar??
What file is the actual notification bar with the battery/clock/etc... would it be inside twframework-res.apk or framework-res.apk?
EDIT: Just set background transparency to 80% in photoshop and changed the color to black. The transparency seems ok, but it resembles minimalistic theme too much... gonna fiddle with it some more today.
jslee1020 said:
What file is the actual notification bar with the battery/clock/etc... would it be inside twframework-res.apk or framework-res.apk?
Click to expand...
Click to collapse
it is in the framework.apk. The notification bar's file is:
statusbar_background.9.png
This is confirmed. I j ust set mine to a gradient and it actually looks kind of good.
screenie:
http://wtfokc.com/sef****/snapshot-4.png
Hey Malfunction,
Finally got it working past the galaxy S screen, thanks for the info. One last question, then I should be out of your hair. Where can I change the settings for the media scanning icons? Currently, the white default icons are showing, but I'm trying to change that to the black SD card. I'm going to look into it myself too; figured I'd ask though.
Thanks,
gangpe said:
Hey Malfunction,
Finally got it working past the galaxy S screen, thanks for the info. One last question, then I should be out of your hair. Where can I change the settings for the media scanning icons? Currently, the white default icons are showing, but I'm trying to change that to the black SD card. I'm going to look into it myself too; figured I'd ask though.
Thanks,
Click to expand...
Click to collapse
Good deal, glad you got it working. What was the problem?
As for the SDCard- depends which you need. In framework-res there are these 3:
stat_notify_sdcard.png
stat_notify_sdcard_prepare.png
stat_notify_sdcard_usb.png
I had to do some hunting to find out which program was the running process for the Media Scanner. It is "MediaProvider.apk" on your /system/app folder. I edited mine and it now works and has all the Tat icons loaded. Thanks for that heads up I hadnt noticed that little piece before you mentioned it.
I looked at Tat's ROM section and also saw that he has edited these, may consider if you are wanting to mimick his:
DownloadProvider (Market)
MediaProvider (Media Scanner)
Vending (Market)
PackageProvider.apk (Uninstallation Screen)
GoogleQuickSearchBox.apk (Google Search)
This is best done after you flash a ROM as you might lose some settings.
(I noticed my wall paper changed and i had to sign back into Google account)
---This framework-res.apk file is different for every ROM---
Hi,
I wanted to share a little mod that could help in extending battery life - lowering default auto-brightness levels. As all of You know our big, bright SuperLCD is an excelent display but for that it uses most of our battery:/
I like the idea of auto-brightness but I find it too bright for most of the time. Setting brightness manualy to one level makes it either too dim or it uses too much battery and switching it all the time that You go outside or turn on the light is a little bit inconvenient.
In order to lower auto-brightness levels You have to change values in framework-res.apk/res/values/arrays.xml and here is how (read whole post first )
These are stock HTC Raider values:
Click to expand...
Click to collapse
Code:
<integer-array name="config_autoBrightnessLcdBacklightValues">
<item>75</item>
<item>75</item>
<item>75</item>
<item>97</item>
<item>120</item>
<item>142</item>
<item>170</item>
<item>198</item>
<item>227</item>
<item>255</item>
</integer-array>
These are values that I use and found best for me:
Code:
<integer-array name="config_autoBrightnessLcdBacklightValues">
<item>20</item>
<item>40</item>
<item>50</item>
<item>70</item>
<item>90</item>
<item>100</item>
<item>130</item>
<item>155</item>
<item>180</item>
<item>225</item>
</integer-array>
These brightness levels are corresponding to the amount of light that light sensor is getting - the lowest value is while in the low light the highest when for example your phone is in direct sunlight. Brightness values are defined by numbers 1 is the lowest possible setting and 255 is the maximum brightness that can be set.
As You can see I was pretty aggressive with lowering these values and yet the screen is still bright in every situation. You can set them a little bit higher or lower in order to suit your preferences.
Here is a guide on how to perform this mod on any framework-res.apk using apk manager (thanks for the guide goes to desean):
1. Download APK manager and unpack somewhere
2. Grab framework-res.apk from your phone under \system\framework\ (e.g. adb pull) and place it in the "place-apk-here-for-modding" folder
3. Run Script.bat and select option 9
4. Once done, go to projects\framework-res.apk\res\values\arrays.xml and edit your values as per first post.
5. Once edited, compile the apk using option 11
6. Qn: Is this a system apk. Ans: y
7. Qn: Aside from the signatures, would .... least. Ans: y
8. Prompt: In the apk manager folder u'll find a keep folder..... done then press enter on this script. Press any key to continue . . . You have to go to "keep" folder and delete resources.arsc because arrays.xml have been changed. After this You can press any key in apk manager window.
9. Once done, input 25 in apk manager and select "unsignedframework-res.apk" by entering the number that stands for it. After selecting it You should see in apk main window in the top right corner "Current-App: unsignedframework-res.apk".
10. Now press 5 to zipalign apk. You will find your completed, zipaligned apk under place-apk-here-for-modding\unsignedframework-res.apk.
11.Rename it back to framework-res.apk and adb push the file back to your phone
Click to expand...
Click to collapse
To send it back to your phone
Prerequisites have...
The file you are pushing must be placed in the platform-tools folder of adb so if you are pushing file "framework-res.apk" this needs to be downloaded/copy and pasted in C:\android-sdk-windows\platform-tools
1: go to run and type cmd (or just open your command prompt)
2: cd C:\android-sdk-windows\platform-tools
3: adb remount
4: adb devices *if everything is set up right this should output a serial number*
5: adb push FFFFFFF.FFF /#####/###### *i hope my notes help here you need to put the file name in for the F(s) and in the pound signs you put the destination on the devices:
Code:
adb push framework-res.apk /system/framework
7. adb reboot this is how you finish
Click to expand...
Click to collapse
You have to copy the file to your phone with ADB or you will get a boot loop and have to re install your ROM.
Link for APK Manager HERE
If you have problems with apk manager showing java error (like it did) this post helped me fix that
Sources:
http://forum.xda-developers.com/showthread.php?t=1235212
http://forum.xda-developers.com/showthread.php?t=695701
http://forum.xda-developers.com/showthread.php?t=642437
APK Manager 4.9 download link (currently original thread link down)
http://www.zshare.net/download/99034654c32618ba/
WOW! I was just about to ask if anyone knew how to accomplish this! Thanks dude!
Edit: Er..phone just went into a bootloop. Lemme try again..
Edit2: I first replaced the framework-res.apk using root explorer...big mistake, phone went into a bootloop and I couldnt adb to it to push the apk correctly, whoops. Just reinstalled the ROM I was using and pushed the apk using adb and all is well.
I noticed two other very similar looking values: config_autoBrightnessLcdBacklightValuesUp and config_autoBrightnessLcdBacklightValuesDown. Is it necessary to change these as well?
m0biusace said:
WOW! I was just about to ask if anyone knew how to accomplish this! Thanks dude!
Edit: Er..phone just went into a bootloop. Lemme try again..
Edit2: I first replaced the framework-res.apk using root explorer...big mistake, phone went into a bootloop and I couldnt adb to it to push the apk correctly, whoops. Just reinstalled the ROM I was using and pushed the apk using adb and all is well.
I noticed two other very similar looking values: config_autoBrightnessLcdBacklightValuesUp and config_autoBrightnessLcdBacklightValuesDown. Is it necessary to change these as well?
Click to expand...
Click to collapse
Yes you have to use adb ill put that in the first post,
to be honest i am not entirely sure what that is for i assume, that it is when you move the slider what values it displays when you slide it, i noticed a change without changing those values.
also i changed the button back lights to 200, i find it more than enough for me.
Is there a working mirror to APK manager? The link in the thread is down.
uploaded
sbddude said:
Is there a working mirror to APK manager? The link in the thread is down.
Click to expand...
Click to collapse
uploaded here
http://www.zshare.net/download/99034654c32618ba/
Serious props to you jul644 for detailing this process! I've always hated how the Hero, Evo, & now Vivid I've had never got dark enough in pitch black rooms, and now I'm excited to fix that problem. I was curious though since I just modded my battery meter using UOT Kitchen, if I could drop in the backlight-modded framework-res.apk via 7-zip replacing the UOT framework-res.apk file then flash it via recovery. I wonder if that would make me sign into Google and mess with settings like you mentioned. Thanks.
How-To with UOT
jul644 said:
You have to copy the file to your phone with ADB or you will get a boot loop and have to re install your ROM.
Click to expand...
Click to collapse
How, if it's possible, do we integrate this modded framework-res.apk into a UOT Kitchen zip flash file? I want to mod my battery icons and would like to install at the same time so one doesn't interfere with the other. Should I upload the framework-res.apk from this to UOT Kitchen (with my original SystemUI.apk) and then change the battery icons, then download and flash?
Thanks for your help!
*****EDIT - 2/15/2011*****
Ok so I did the framework-res.apk edits by decompiling/recompiling per jul644, uploaded that into UOT Kitchen along with original SystemUI.apk and com.htc.resources.apk. I chose my battery icon mod, downloaded, cleared all the caches and flashed in recovery with no problems ) Just wanted to let you guys know how to make it a recovery flashable zip instead of pushing via ADB.
ICS?
So can anyone confirm or deny if this still works wit ICS will be trying it myself, when I get a chance, but would rather not waste time if it wont work!
It does work, I have done it. ICS it's just more difficult to decompile & recompile. I added it & 1% stock-style battery icons into Pirateghost's CWM .56 flashable ROM.
Keep getting errors when recompiling using stock telstra ICS+ root
error on 1st line after selecting option 11 ie. step 5 above
could not find sources????
Any suggestions what I am doing wrong????
---------- Post added at 09:37 PM ---------- Previous post was at 09:24 PM ----------
okay also getting this error twice before it de-compiles
the system cannot find the path specified
then seems to decompile happily???????????
Any suggestions?
I'm getting an 'Operation not permitted' when I try to remount before pushing the file back. Anyone else having this problem? I'm running a WCX GB ROM (no ICS, I'm on Rogers).
formicae said:
I'm getting an 'Operation not permitted' when I try to remount before pushing the file back. Anyone else having this problem? I'm running a WCX GB ROM (no ICS, I'm on Rogers).
Click to expand...
Click to collapse
are you trying to remount your sd card? if so do not, just select charge only
No, just trying to remount as per the instructions in the first post, so /system is R/W. Setting it to charge only. No dice.
I tried doing it in recovery (by mounting /system, then going through the ADB commands, all of which are successful), but the result is a bootloop once I'm done.
Edit: It's also worth noting that newer versions of APK Manager/Multi-tool seem to have different numbering for the operations. In step 9, number 22 sets the compression level, whereas I think it used to set the active APK (which I think is 25 now).
I ended up taking the stock framework-res from the ROM, modifying the arrays.xml values as per the OP instructions, then going through the UOT Kitchen (I had a battery mod anyway). Worked perfectly.
Thanks to pauley for reporting success earlier, which provided me with the workaround.
Has anyone done this that could possibly create a flashable zipped version of it? I tried to do it myself but with the new APK Multi Tool things were different to the instructions of OP and I couldn't get it to work
Edit: Nvm managed to fix it and make my own flashable zip. Thanks for the effort OP
I have tried to do this... And I keep getting an error on the recompile side...
Just wondering... Does apkmanager require windows 7 or something... Or is there some reason it wouldn't work on windows xp?
Sent from my HTC PH39100 using Tapatalk 2
rignfool said:
I have tried to do this... And I keep getting an error on the recompile side...
Just wondering... Does apkmanager require windows 7 or something... Or is there some reason it wouldn't work on windows xp?
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
The errors I encountered when compiling were solved by:
1) Putting Java in the windows path
2) Putting ADB in the windows path
3) Not having any spaces in the APK Manager file path
There are no OS dependencies that I'm aware of. Just open the log from within the APK manager and you should be able to identify the error.
The problem is I don't really speak java all that well...
Could I just move the java executable to the working directory?
Sent from my HTC PH39100 using Tapatalk 2
rignfool said:
The problem is I don't really speak java all that well...
Could I just move the java executable to the working directory?
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
For java, all you have to do is download the JDK (i got the 32 bit version), and then add 'C:\Program Files (x86)\Java\jdk1.7.0_03\bin' to the windows path so it becomes something like:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files\MATLAB\R2011a\runtime\win64;C:\Program Files\MATLAB\R2011a\bin;C:\Program Files (x86)\MKVToolNix;C:\Program Files (x86)\Java\jdk1.7.0_03\bin;C:\Android\android-sdk\platform-tools\;C:\Android\APKMultiTools\
For Windows XP, you'd probably be running 32 bit and so it would be installed in the regular program files.
pod0087 said:
For java, all you have to do is download the JDK (i got the 32 bit version), and then add 'C:\Program Files (x86)\Java\jdk1.7.0_03\bin' to the windows path so it becomes something like:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files\MATLAB\R2011a\runtime\win64;C:\Program Files\MATLAB\R2011a\bin;C:\Program Files (x86)\MKVToolNix;C:\Program Files (x86)\Java\jdk1.7.0_03\bin;C:\Android\android-sdk\platform-tools\;C:\Android\APKMultiTools\
For Windows XP, you'd probably be running 32 bit and so it would be installed in the regular program files.
Click to expand...
Click to collapse
thanks for the help! can you tell me the new number system with apk manager?