Database Develop

Stuck at Galaxy S logo!

Guys... I´m in trouble... I´m on JPM and flashed CF-Root-JPM-v1.2-Busybox-1.17.1 but my phone was taking too long, like more than 20min at Galaxy S boot. I knew something did go wrong, removed the battery and I entered download mode again and re-flashed... Same thing! My phone is not getting past Galaxy S boot up picture!! I can't enter recovery mode but can enter download mode! Is there anything I can do to bring my phone back to life?! PLEASE HELP ME!
I already tried to flash new roms in odin. My device is recognized but odin hangs and does nothing...
I need some advice on this, did I kill a new phone?! I´m scared

Please Help!
- UPDATE: SOLVED!
Hi there, I'm having the same problem on my I9000B. Please help me.
This is my story, I had upgraded my 2.1 firmware to VIVO's 2.2 Froyo via KIES with the Kies Registry Patcher (used ZVV). Everything worked perfectly, but I wanted to root my I9000B so I made the terrible mistake of using CF-Root via Odin, (http://forum.xda-developers.com/showthread.php?t=788108) following the exact instructions. The kernel replacement (zImage file) was for the I9000 so I had the touchscreen problems. When the phone booted showed Samsung galaxy S GT-I9000B and then inmeadeatly the "B" dissapeared.
Because of my n000bness I tried to use the zImage file from this ROM (VIVO's) (http://forum.xda-developers.com/showthread.php?t=858483), by downloading my own .tar created file (with 7-zip) of the zImage file. Here is were things went down. I got the android - USB cable boot icon. I could not go into recovery mode but I could do download mode, so I re-flashed VIVO's ROM (the one published here) with Odin:
I used the 803 .pit file, Odin 1.3
I did not check re-partition
I selected the ROM as the PDA file and I left PHONE and CSC blank.
the ROM was downloaded to the phone and Odin did not gave me problems.
My problem here is that I get the black screen with vibrations from time to time on boot. This is exactly what happens:
The phone starts showing "Samsung galaxy S.... GT I9000B (at least shows "B")
I can get into recovery mode but the following appears:
Code:
update media, please wait
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please us UI menu for format and reboot actions.
copy default media content failed.
Then I did a factory reset, succesfully completed, tried again flashing the ROM but with Re-partition box checked (as instructed here: http://forum.xda-developers.com/showthread.php?t=723596) but the same stuff happens.
Please tell me what to do! I know it was a stupid mistake trying to fix ony the zImage file, and stupider was using CF-Root on my non-compatible device.
PS: I can get into download mode with no problems
Code:
pda i9000bvjjpa
phone i9000bvjjpa
csc i9000bzwjp3

I have exactly the same problem
but i can go into recovery mode and download mode.
the galaxy screen is I9000 and my sgs is I9000B
any ideas?

A friend of mine has the same issue on his SGS. Both recovery and download mode working.

Have you done JUST like this:
Figueiredo81 said:
Guys... I´m in trouble... I´m on JPM and flashed CF-Root-JPM-v1.2-Busybox-1.17.1 but my phone was taking too long, like more than 20min at Galaxy S boot. I knew something did go wrong, removed the battery and I entered download mode again and re-flashed... Same thing! My phone is not getting past Galaxy S boot up picture!! I can't enter recovery mode but can enter download mode! Is there anything I can do to bring my phone back to life?! PLEASE HELP ME!
I already tried to flash new roms in odin. My device is recognized but odin hangs and does nothing...
I need some advice on this, did I kill a new phone?! I´m scared
Click to expand...
Click to collapse
1. Enter your phone in dl-mode, but don't connect yet.
2. Open Odin, tag re-partition, auto reboot and f.reset time, make sure efs clear and bootloader -fields are NOT checked. select CORRECT PIT-file (2.1 ROMS usually 512, 2.2 ROMs many times 803, samfirmware always tells which one to use next to the dl-link of a ROM-file), enter your phone in dl-mode, plug, wait it to be recognized by Odin.
3. Click start, wait until Odin shows PASSED, unplug your phone, remove the battery for 30 seconds, enter dl-mode again, don't plug just yet.
4. In Odin, click Reset. Then select PDA, Modem and CSC files compatible with the PIT-file used in re-partition, plug your phone, make sure re-partition NOT checked and no PIT-file selected (once again, make sure you use correct PDA for the PIT you flashed). auto-reboot and f.res.time should be selected. Make sure efs clear and bootloader -fields are NOT checked.
4- Plug your phone and when recognized, click start. Wait to be passed. Now your phone will boot (or if not, boot manually) and should work just fine.
Edit: Try to put Eclair ROM, for example JM2, not jpa, and see if it works better.

Thanks!!
Sir, you have saved my phone and my whole week. This is what I did:
With this method I tried the Vivo Brazil's 2.2 Rom again and did not work, same error, tried using both 803 and 512 pit files.
Then I downloaded an 2.1 firmware (JG9, which was the same that came with the new phone) from Claro Brazil that I found on google and flashed it with the 512 pit and worked perfectly. I had been strugling with this problem the las 6 hours and solving this was urgent because I'm going to vacation now.
Now I can re-update via Kies and return to Froyo were everything worked.
I will not try to do things like this in such a risky way (risky because I don't know)
Thank you very much.
Margaliini said:
1. Enter your phone in dl-mode, but don't connect yet.
2. Open Odin, tag re-partition, auto reboot and f.reset time, make sure efs clear and bootloader -fields are NOT checked. select CORRECT PIT-file (2.1 ROMS usually 512, 2.2 ROMs many times 803, samfirmware always tells which one to use next to the dl-link of a ROM-file), enter your phone in dl-mode, plug, wait it to be recognized by Odin.
3. Click start, wait until Odin shows PASSED, unplug your phone, remove the battery for 30 seconds, enter dl-mode again, don't plug just yet.
4. In Odin, click Reset. Then select PDA, Modem and CSC files compatible with the PIT-file used in re-partition, plug your phone, make sure re-partition NOT checked and no PIT-file selected (once again, make sure you use correct PDA for the PIT you flashed). auto-reboot and f.res.time should be selected. Make sure efs clear and bootloader -fields are NOT checked.
4- Plug your phone and when recognized, click start. Wait to be passed. Now your phone will boot (or if not, boot manually) and should work just fine.
Edit: Try to put Eclair ROM, for example JM2, not jpa, and see if it works better.
Click to expand...
Click to collapse

Well, the good news is that it appears that the "E:Can't mount /dev/block/stl10" error msg can be resolved.
http://forum.xda-developers.com/showthread.php?t=788850
This thread discussed this specific error message. For some reason, they're claiming that flashing JPC with 512 pit and repartition checked is doing the trick. I'm assuming this will result in data loss but I guess that's better than losing the phone entirely You should be able to flash to whatever firmware you want afterwards (assuming it works).
JPC:
http://www.multiupload.com/WB3104V8G0
Pass = samfirmware.com
512 PIT
http://www.multiupload.com/I5WICSBFJ1
Report back if this works for you.

Please, post the link or give me directions for the Claro's ROM. I am having the same problem here.
Thanks.

gtg2 said:
Well, the good news is that it appears that the "E:Can't mount /dev/block/stl10" error msg can be resolved.
http://forum.xda-developers.com/showthread.php?t=788850
This thread discussed this specific error message. For some reason, they're claiming that flashing JPC with 512 pit and repartition checked is doing the trick. I'm assuming this will result in data loss but I guess that's better than losing the phone entirely You should be able to flash to whatever firmware you want afterwards (assuming it works).
JPC:
http://www.multiupload.com/WB3104V8G0
Pass = samfirmware.com
512 PIT
http://www.multiupload.com/I5WICSBFJ1
Report back if this works for you.
Click to expand...
Click to collapse
worked here
thanks

thanks for the help i love you no homo !

Un Loko said:
Sir, you have saved my phone and my whole week. This is what I did:
With this method I tried the Vivo Brazil's 2.2 Rom again and did not work, same error, tried using both 803 and 512 pit files.
Then I downloaded an 2.1 firmware (JG9, which was the same that came with the new phone) from Claro Brazil that I found on google and flashed it with the 512 pit and worked perfectly. I had been strugling with this problem the las 6 hours and solving this was urgent because I'm going to vacation now.
Now I can re-update via Kies and return to Froyo were everything worked.
I will not try to do things like this in such a risky way (risky because I don't know)
Thank you very much.
Click to expand...
Click to collapse
JM2 with pit method is perfect. my "E: can't mount /dev/block/mmcblk0p1" problem has finally been solved.
Thanks

This worked for me.
http://samsunggalaxysforums.com/sho...CIAL-STOCK-FROYO-2.2.1-IS-OUT!!!!-(i9000XXJPU)

???I bought my Phone from CSpire but stuck on At&t Logo???
Samsung Galaxy s Showcase stuck on the At&t Logo...Will not let me go into Download mode??? Help please?

upgrade froyo issue, phone wont go pass boot

So I got my Galaxy S..used from a friend. it's a used unit and it's running eclair DXJG4 firmware. I've decided to upgrade it to froyo via odin (MTP Driver issue made me not use kies anymore)..At first I tried ticking repartition and flashed it and odin fails and the phone wont go past the galaxy S GT-I9000 screen. (I downloaded my DXJPA firmware from samfirmwares and I ticked both three PDA, PHONE and CSC and all of them are linked to the single tar). I tried the second time...repartition ticked AGAIN (I think this is the main problem cause now) and only ticking PDA. Odin passed. But phone still stuck at boot screen (the Galaxy S GT-I9000 screen). please help?
Ive read some topics..seems that I need to reflash it back to eclair JG4 firmware with repartition ticked and flash froyo without repartition? The most confusing part for me is whether to tick phone and CSC or not.

hi heres a guide on dxjpa http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install-froyo.html
btw dxjpa isnt the latest, dxjpe is latest
guide to dxjpe:http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install-froyo.html

You can try this.
When the phone is froze on the screen, connect it to the PC. If you can access your SD card from within Windows, format the sd card. Power down the phone, and power it back up. It should then boot past the screen.

i think the main problem is about im using a single tar for csc, phone and pda. might need to reflash though.
electro: I can't, its stuck in the galaxy S GT-I9000 screen. windows wont recognize it.

kongmyy said:
i think the main problem is about im using a single tar for csc, phone and pda. might need to reflash though.
electro: I can't, its stuck in the galaxy S GT-I9000 screen. windows wont recognize it.
Click to expand...
Click to collapse
redownload it from the link that i have gave u.have try using it and it definitely works

so I can just reflash it with the correct csc, pda files that is in the link you given and it will work? Or i need to downgrade to eclair first and then upgrade again. because I'm worried my last 're-partition' with the wrong files might need me to downgrade.

im downloading the files right now. wish it could be downloaded soon though, my connection is slow right now.

which one u downloading dxjpa or dxjpe?
u have to enable repartition

dxjpa. okay i will enable. wish me good luck

shouldnt have any problems if u follow the steps on the blog

tried it and now my phone works nicely. Thanks!

probably think u should upgrade to dxjpb since it is actually based on dxjpa with some cleanups of the rom

[Q] keep rebooting and no recovery mode

Purchased two Bell Canada Samsung Galaxy S as-is from local kijiji.
They all performing the same thing, rebooting at Galaxy S logo, GT-I9000M page, it won't go any further. and there is no recovery mode at start-up.
Here are the steps which I have played with for past two days.
1. Trying to get to recovery mode
- tried ADB, but it doesn't work, since "USB debug" is not on, and it won't accept as a device, and I am not able to turn that on, since I can't even get on the main screen.
- tried three key combo, vol up + home + power on, at least a hundred times for past two days, it doesn't work. fortunately download mode is working (at least I have more option to try). and I know how to get to recovery mode, I played with my friend's before.
2. Trying to use ODIN to flash the firmware
- unchecked "re-partition", unchecked "bootloader", pick 512 as PIT and then choose following as PDA
JH2, JK3, JK4, JL2
always successful on refresh, but phone still does the same, stuck at LOGO page
- also tried, checked "re-partition", and checked "bootloader", pick 512 as PIT and repacking following into PDA, Phone/Modem, CSC, still won't work...
JP series, JH, JK series, JL
At the beginning I though it was problem on CSC, I didn't use correct one to match my phone model #, but what's mine??? I can't go into my phone to check. I checked my friend's I9000, he used I9000BMCJK4, and I assume all JK series should work with me, since our IMEI are similar. And I tried many times on different cache.rft as CSC.tar, still no luck for me
I go crazy now, $400 USD gone. Seriously needing help. Any help is highly appreciated.

try the one jl2 download file and samsungfirmwares.com it flashes a special bootloader that may fix things.. it should be a single file you put in as pda nothing else..
if not they may have permantely trashed internal memory and you are sol.

lgkahn said:
try the one jl2 download file and samsungfirmwares.com it flashes a special bootloader that may fix things.. it should be a single file you put in as pda nothing else..
if not they may have permantely trashed internal memory and you are sol.
Click to expand...
Click to collapse
I have tried one of JL2 file from somewhere (don't remember where), but I will get one JL2 file from samsungfirmwares.com again, see if that works.
Do you mean, only choose the file for PDA, left PIT empty, and get everything uncheck?
permantely trashed internal memory? are these the common problem with this model? I got two of these, and both of them have the same issue, I think, there should be a way to slove it, right? Should I give up these thoughts???
anyways, thanks anyways, I will report back after I flesh JL2 from samsungfirmwares.com

Ok, you need to flash jl2 with pda, repartition, pit file and the secondary boot loader... The SBL(secondary boot loader) is what will actually fix your phone
Hopefully it will work.
Sent from my GT-I9000m using XDA App

<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.rfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> factoryfs.rfs
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Still no luck on this firmware, I9000UGJL2, by the way, should be samfirmware.com instead of samsungfirmwares.com
above message I got from ODIN3 v1.30, it looks fine for refresh, but it doesn't work. the phone keep rebooting, it won't pass LOGO page, again, only download mode I can use.
HELP! HELP! HELP!
any leads???

is "<ID:0/005> Sbl.bin" secondary boot loader???
I got the file for PDA, I9000UGJL2, is this the one? if not, where should I get it? how do I update it?
I did it again, with "re-partition" checked, PIT choosed as s1_odin_20100512.pit, I9000UGJL2_homebinary_add_param.tar (which I just downloaded from samfirmware.com), it still doesn't work.
anything else I can try? maybe something simple I didn't do???

I too am a bell user I had the same problem a few weeks back. This is going to sound messed up, but i'm going to do my best to explain how I solved the problem.
DO NOT MULTI-TASK ON THE COMPUTER WHILE DOING THIS. CLOSE ALL OTHER APPLICATIONS.
-remove external sd and sim card
-go into download mode (hold vol down+power+home).
-turn on ODIN
-plug in usb (both computer and phone)
-check re-partition
-ONLY use the 512 pit file. DO NOT use a rom.
-start ODIN and it should only take a minute. this will wipe your device completely but still allow you to access download mode.
- remove usb close ODIN
- start up ODIN again and connect usb
- use 512 pit and JP1 or JP2 rom.
- After flashing, this SHOULD give you an error and send you straight into recovery mode. you're looking for a specific error code. you need the error to have "sl01" or "sl10" (whichever, i forgot which it was) at the end of the path. if the end of the path has "m(something)" then use a different rom till you get the "sl10".
these errors are internal sd errors which your phone is experiencing right now, but the phone is fixable from the "sl10" error.
continuing...
- once you get the "sl10" error, close ODIN, unplug USB, turn off phone.
- go back into download mode.
- boot up ODIN with 512 pit and ULG2 rom.
- plug in phone
- start flashing.
this can give you two outcomes:
1) fixed galaxy S
2) error code with "m(something)" at the end of the error path.
if it's #2 do this all over again until it works.
This took me 3 days to figure out these steps, 10 hours each day. although it doesnt seem to make sense, my phone is working right now and it is where I am writing all this from. My only explanation is that Bell gets ****ty product from samsung. it's almost impossible to flash custom roms on a bell galaxy i9000 because the internal SD seems to have trouble being mounted.
i hope this helps and i hope it doesnt take long for you to fix this problem.
btw, if it does get fixed data connection wont be available. to enable it go to your apn settings. create new named "Bell" with apn as "pda.bell.ca" and leave all other options blank. data should be restored after that.
Sent from my GT-I9000M using XDA Premium App

jt_kyle said:
I too am a bell user I had the same problem a few weeks back. This is going to sound messed up, but i'm going to do my best to explain how I solved the problem.
DO NOT MULTI-TASK ON THE COMPUTER WHILE DOING THIS. CLOSE ALL OTHER APPLICATIONS.
-remove external sd and sim card
-go into download mode (hold vol down+power+home).
-turn on ODIN
-plug in usb (both computer and phone)
-check re-partition
-ONLY use the 512 pit file. DO NOT use a rom.
-start ODIN and it should only take a minute. this will wipe your device completely but still allow you to access download mode.
- remove usb close ODIN
- start up ODIN again and connect usb
- use 512 pit and JP1 or JP2 rom.
- After flashing, this SHOULD give you an error and send you straight into recovery mode. you're looking for a specific error code. you need the error to have "sl01" or "sl10" (whichever, i forgot which it was) at the end of the path. if the end of the path has "m(something)" then use a different rom till you get the "sl10".
these errors are internal sd errors which your phone is experiencing right now, but the phone is fixable from the "sl10" error.
continuing...
- once you get the "sl10" error, close ODIN, unplug USB, turn off phone.
- go back into download mode.
- boot up ODIN with 512 pit and ULG2 rom.
- plug in phone
- start flashing.
this can give you two outcomes:
1) fixed galaxy S
2) error code with "m(something)" at the end of the error path.
if it's #2 do this all over again until it works.
This took me 3 days to figure out these steps, 10 hours each day. although it doesnt seem to make sense, my phone is working right now and it is where I am writing all this from. My only explanation is that Bell gets ****ty product from samsung. it's almost impossible to flash custom roms on a bell galaxy i9000 because the internal SD seems to have trouble being mounted.
i hope this helps and i hope it doesnt take long for you to fix this problem.
btw, if it does get fixed data connection wont be available. to enable it go to your apn settings. create new named "Bell" with apn as "pda.bell.ca" and leave all other options blank. data should be restored after that.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
great!!! Another option I can try. Thank you.
I will try it out right after my work. so the idea behind this, is bricking it into recovery mode and S10 error code. and then fresh right back with correct ULG2 (is this correct? frist time heard about this rom)
anyways, I will post back with result.

Where can i find this ULG2 rom?

did it work?

Thananjeyen said:
Where can i find this ULG2 rom?
Click to expand...
Click to collapse
I think jt_kyle meant I9000UGJL2
and you can get them from samfirmware.com

Paallikko said:
did it work?
Click to expand...
Click to collapse
yes, lucky I got one of my Bell Samsung phone work. Since I done a million times of refreshing and rebooting and etc... I am not sure what I did, now I still trying to remember last 10 steps I did to make this work.
But definitely, I could not have done this repair without jt_kyle. Thank you so much, jt_kyle.

jt_kyle, Thank you!!!
but none of JP1 or JP2 is givining me the error "tl10", I tried
I9000DXJP1
I9000TGYZSJP2
I9000XXJP1
I9000XXJP2
it come out error started with "m..."
I just keep refreshing each on PDA 3 to 4 times, and choose with re-partition or without. At the end I try a few another ROMs as well, I still get no "tl10", but somehow, just that magicical moment, the screen come out a set of commands that look like format sd card, so I got excited, fresh it with JL2. It is back to work.
still no clue the steps of fixing the problem.
one done, the another one to go.
any more ideas please, and I think I am really close to solve this one now.
Thank you All

FIX
Look for a file called I9000UGJL2Complete follow the same steps pit and so on after your phone boots up youll have a blank baseband then you get the I9000UGJL2 modem and flash it where it says phone this has unbricked a few for me hope this helps

EVERED78 said:
Look for a file called I9000UGJL2Complete follow the same steps pit and so on after your phone boots up youll have a blank baseband then you get the I9000UGJL2 modem and flash it where it says phone this has unbricked a few for me hope this helps
Click to expand...
Click to collapse
if you have a way for me to give you this file i do have it just not sure how to do so because its 286MB

Could it be dead?
Since you have one of the infamous i9000m's it might also just be a dead SD card? You might try calling samsung and trying to get it repaired under warrenty as they are all under a year old (try and flash jl2 first even it will not boot up). It sounds like no receipt may not be an issue.
Lots of info from allgamer's list of i9000m issues in the general section.
At least you have one in the meantime!

same problem
Hey ive got pretty much the same problem that you had. Only differences are that I'm from Australia and am on Virgin network.
My phone became semi bricked one day when it restarted and since the 3 button combinations did not work i ordered in a USB jig which i received today. I used odin 1.8 to try and flash to I9000BVJJPD which i got from samfirmware.com but it ended up stuck on the logo screen vibrating once in a while. I decided to repeat it with no avail and began to use other roms and use .PIT.
This is where my phone became even worse and is now in it's current position; rebooting at the GT-I9000 page. I tried the method that jt_kyle suggested, substituting australian roms instead but it is still in the same position.
Does anyone have any other suggestions or should i just try getting a warranty?

Look for the ugjl2 complette and repeat what I said
Sent from my GT-I9000 using XDA Premium App

EVERED78 said:
if you have a way for me to give you this file i do have it just not sure how to do so because its 286MB
Click to expand...
Click to collapse
I think I have this I9000M_JL2_JL2_JL2_JL2_UG_BMC file, is the same file that you are talking about? JL2 Complete?
I tried this file many times, it won't work neither.

for past one hour I played around this phone, trying to repeat the steps I did for the first phone. Unfortunately, nothing is working for me AGAIN!
but I got these error page all the time, like following...
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(I/O error)
E:copy_dbdata_media:Can't mount SDCARD:
I think that's bigest problem in my case, and for a lot of people in this forum. Do any people has a good solution for this???

[Q] Humble request from Epic noob

Hello guys,
Yes... I'm a total noob, I tried to root my phone with the wrong files and ended up bricking my phone.
My reason to root: wanted to be able to use the emulators / controllers on the market. If only I knew this was going to happen
On my attempt to reverse the situation, I did it... my phone stopped booting completely.
I figured since my phone does go onto downloading mode still, that I'd be able to return it back to normal once I educated myself a bit on the processes of flashing androids.
I have tried to find a thread similar to mine, and I have been unsuccessful to the point of utter frustration (I even considered going and getting a new phone).
Then I came across AllGamer's thread:
http://forum.xda-developers.com/showthread.php?t=1379650
I thought my search (of 8 hours by then) was done, that everything would be back to normal.
But somehow I have been unsuccessful to mimic his results on flashing the phone back to Stock.
I'm probably wrong assuming that the bootable files on the phone are missing since my stupid trials at the beginning of it all. Hence why AllGamer's instructions aren't doing it for my phone.
I have a Samsung Galaxy S GT-I9000m
This is my last resource (to which I have no right, but I figured I should try before calling it quits).
Can any of you help me fix my phone?

Did you try flashing using the three files method in ODIN? You need ODIN, a PIT File, and an original ROM that has 3 files (Phone, PDA, CSC) in it. Check the Re-Partition option and your phone should go back to the original rom.
Go to SamMobile dot com to find a Samsung ROM

As long as you have download mode then your phone is still alive.
Go to samfirmware ( or sammobile as it may have changed over now ) and get a zip file for you device which contains 3 files and a pit file.
MAKE SURE YOU GET A FIRMWARE FOR AN I900M NOT A I9000 OR AN I9000T!
Download odin and put the pit file in the pit box.
in PDA box put PDA file or it may be called CODE.
In MODEM put the MODEM file or it may be called PHONE
In the CSC box put the CSC.
make sure that repartition / auto reboot / auto F reset are ticked.
Any other boxes should be unticked.
Put your phone into download mode and connect it to the PC.
MAKE SURE YOU OPEN ODIN AND CLOSE ANY KIES SOFTWARE BEFORE CONNECTING YOUR PHONE!
a yellow box should pop up in odin saying COM XX
press the start button and let odin work its magic and voila! your phone is alive!
Good luck

[Q] Samsung Tab P1000 not powering on

hi i have a Samsung Tab P1000 and now its not powering on after i forced to switch off from downloading mode,because I'm trying to update from Froyo 2.2 to gingerbread 2.3.3 but after following the instruction from opening the odin, putting the pit file and PDA file and i click the start its only showing the setupconnection.......please help me.....thank you

did you try to charge it? If not do that and flash again.

yes....i tried to put in charge and it showing like this in the photo but if i remove from tha charger i cannot powering on and the icon will disappear.....

i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off

Samsung gtp 1000
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
hi guy i ve the same problem, pls i just need to know if is an hard brick or just a soft.
I ve read many trhead on forum and i ve seen that if is hard brick i must use resurrection program but i cant find no link.
pls some one can post me? tnx

cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
That diagram you had is the same thing as the download mode. So treat it as such and flash your rom and kernel normally and it should work. I had the same problem before. To be sure, tried the following thread. Go to the 3rd post in this thread and follow the installation instruction. It will work. http://forum.xda-developers.com/showthread.php?t=1382055

I get that every now and then too. I reinstall the drivers (included with Kies), and reboot the computer. After that it will work.

Froyo to Gingerbread -- Please be extra careful when flashing
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
Does ODIN still recognize your Tab? If you are upgrading from froyo to gingerbread, you may need to load new PIT file as well as new dbdata.rfs.
If ODIN still recognize your Tab, try to download your choice of firmware again with PIT file included. I'll attach a working PIT for you.
Note: Please extract the attached file to get the .PIT file and put it on PIT field on ODIN along with your choice of firmware you are flashing.
Once you are done and reboot, mostlikely you'll be in a boot-loop stuck at SAMSUNG screen. Now reboot to download mode again, then flash the DBDATA.rfs.tar I attached on the following post in PDA field on ODIN:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121

i dont have the icon

wakak make sure you got the proper Samsung driver installed!