Database Develop

Issues with Flashing Galaxy Tab

Hello - It seems as though everyone is somewhat nice and knowledgeable on this board. I'm hoping that no one flogs me in the process of this thread.
I have a T-based Galaxy Tab and am trying to load a new ROM onto it. I've tried multiple times with multiple different ROMs but am not making really any progress. When I plug in the device to a wall outlet, the attached screen is displayed. This is the first time that I've seen this screen and I'm now hoping that this thing isn't bricked. Please help me bring this Tab back from the dark side.
I need to know which ROM to use and the appropriate PIT file. I also need to just understand how I get the device to be recognized by Odin again as it's not being recognized in it's current state. Thanks to all that will help me.
Jim

hi,
can you tell me which firmware files are you using to flash and the PIT files?

Yes. I used the below files. I know it's the European version but it looked as though it was for TMobile. And I'm somewhat desperate to get this fixed.
PIT - P1_EUR.pit
PDA - P1000BOJJ2-REV03-ALL-CL618963.tar
MODEM - MODEM_P1000XXJID.tar
CSC - GT-P1000-CSC-DTMJJ4.tar
Downloaded them from samfirmware.com/samsungtablets.htm
Jim

jimcansler said:
Yes. I used the below files. I know it's the European version but it looked as though it was for TMobile. And I'm somewhat desperate to get this fixed.
PIT - P1_EUR.pit
PDA - P1000BOJJ2-REV03-ALL-CL618963.tar
MODEM - MODEM_P1000XXJID.tar
CSC - GT-P1000-CSC-DTMJJ4.tar
Downloaded them from samfirmware.com/samsungtablets.htm
Jim
Click to expand...
Click to collapse
i guess the issue is due to the incompatible firmware and a different partitioning file (PIT)
may be you can try installing JHA firmware with repartition, PIT file and then install JID directly without repartition and PIT

Not wanting to be pessimistic here but after browsing the Galaxy S section I came across a thread with that image on your tab. You may have to contact Samsung and have the device replaced. http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Recovery_Mode

Storm, Chow,
I think you may be right. I followed the instructions that Chow gave me and it failed. See attached. I still have the Tab attached to my pc and it still has the same image as original. I've attached my Odin screen so you guys can look at it and tell me if I'm doing anything wrong.
Jim

Hi,
I had that image many times, whenever my tab fails to install any new firmware.
did you reboot the tab after seeing that image
one more try:
after seeing the flash fail > hold the three button combination (power + volume down + home) for long time (may be more than 1 minute) until the tab is switched off and then use three button combination (power + volume down + home) to enter the download mode (you will still see the above image only). now connect the tab to odin and try flashing it.
if i remember correctly, my tab was connected to COM 8 when flashing but i think its USB port selection
this is how i recover my tab to working mode whenever a flash fails

Have you tried with Odin 1.31 with PIT 816 and JHA.tar selecting repartition?In the pic you are using the 1.71, right? I had something similar going back to JID from JJ4 and when I tried with the 1.31 it passed, cant be sure it wasnt just 'the one more try' or the old Odin but it worked.
Good luck
Sent from my GT-P1000 using Tapatalk

I used the Odin 1.3 per your instructions and used th 816 PIT with the JHA tar. This passed as you can see from the attached. This has worked and I now have a working unit that needs to charge up. I'm a little nervous to now install the JID firmware and will likely just try to keep what I've got working. If I do want to install the JID firmware...will I need another PIT file or can I just use the JID firmware and write over? In addition, would i need to select or unselect the re-partition check box.
Thank you guys so much. It appears as though my unit is working.
Jim

jimcansler said:
I used the Odin 1.3 per your instructions and used th 816 PIT with the JHA tar. This passed as you can see from the attached. This has worked and I now have a working unit that needs to charge up. I'm a little nervous to now install the JID firmware and will likely just try to keep what I've got working. If I do want to install the JID firmware...will I need another PIT file or can I just use the JID firmware and write over? In addition, would i need to select or unselect the re-partition check box.
Thank you guys so much. It appears as though my unit is working.
Jim
Click to expand...
Click to collapse
just install the JID without use any pit and do not select re- partition, keep using the 1. 31
Sent from my HTC Desire using Tapatalk

chowdarygm said:
i guess the issue is due to the incompatible firmware and a different partitioning file (PIT)
may be you can try installing JHA firmware with repartition, PIT file and then install JID directly without repartition and PIT
Click to expand...
Click to collapse
I quote.
I had that bad image on the screen for some time... If you connect to the PC you should find the TAB as connected in ODIN. If you flash JHA repartioning with the correct PIT, that for me was 9 and something if I remember, you should restore normal functionality. Try and let me know!

Can confirm.
Had this image several times while testing var firmwares.
Simply connect tab to odin and flash jha image with repartition.
This should fix it.
Sent from my GT-P1000 using XDA App

Guys, I think that he solved the problem using Odin 1.31.He already install the JHA and the unit is working.Pls stop posting without read.The issue can be related with the new Odin.Now he is concerning to install JID over a working unit...

MODEM file
Greetings,
Where did you guys get your MODEM file from? I only can see the PDA and CSC files on the samfirmwares.com site... :S

[Q] NEED HELP!!! Bricked i9001

Guys i need help!!!
I'm a fresh new android user especially SGS+...after rooting the phone, i downloaded an app ERIS MARKET!! I tried using it everything went so good then it asked me to restart the phone...and that's it!!! it shows the samsung logo then galaxy s plus then turns off again and again samsung logon..samsung s plus and so on...!!!
I tried the factory reset but nothing happened!!
Now i've lost all the data and had my phone bricked ((
Any help??

Use odin to reflash. Search for your model than download everything and follow guide or if you have backup on your phone.

ShahirHabib said:
Guys i need help!!!
I'm a fresh new android user especially SGS+...after rooting the phone, i downloaded an app ERIS MARKET!! I tried using it everything went so good then it asked me to restart the phone...and that's it!!! it shows the samsung logo then galaxy s plus then turns off again and again samsung logon..samsung s plus and so on...!!!
I tried the factory reset but nothing happened!!
Now i've lost all the data and had my phone bricked ((
Any help??
Click to expand...
Click to collapse
Hold on, you are not totally bricked as such, if your phone can still boot up like that there is still much life in it. in this case Odin is your buddy. Download your stock firmware according to your region (im not sure if im allowed to post links to other sites, so i wont),
Download Odin (find out how to use it, with the PIT file and your Stock ROM)
Launch Odin (from your PC ofcoz)
Switch off your phone by removing the battery
Put the battery back in, hold HOME button + Volume Down + then POWER button, Your phone should go into download mode.
Connect you phone to the PC using your USB cable, (odin should highlight a yellow square to signal you that your phone has been detected)
Put all the file you downloaded into thier rightful place and then flash.
I have just jumbled it up to give you a general direction, there should be more detailed infor on this site, keep looking and good luck

Tar file
thanks alot guys..
I've downloaded the ODIN and now i've the PIT file but where can i get the TAR file for my i9001?

take a look at samfirmware.com , there you can get the stock roms you want

stock firmware
how can i know the stock firmware on my phone? it doesnot start up so i can't get into the settings or something? and i'm sry but i don't get what does the region do with the firmware?
I'm so sorry but i'm really a very new android user
Thank you so much

search this forum and you find tens of tar files

1. Watch this Video w w w.youtube.com/watch?v=JmvCpR45LKA
2. Just register here w w w.sammobile.com/firmware/ when done click firmware and download what you need!

alzaq said:
search this forum and you find tens of tar files
Click to expand...
Click to collapse
As it was already mentioned go to samfirware.com and look for a stock rom espeacially for your region.
If you dont know wich to use, try to google the different country codes.
Further you should download odin 4.43 (u must use 4.43) and flash it back to the stock.
Like if it helped u unbrick ur phone
---------- Post added at 09:39 AM ---------- Previous post was at 09:34 AM ----------
ShahirHabib said:
how can i know the stock firmware on my phone? it doesnot start up so i can't get into the settings or something? and i'm sry but i don't get what does the region do with the firmware?
I'm so sorry but i'm really a very new android user
Thank you so much
Click to expand...
Click to collapse
You only have to know that ur owning a I9001
Go to samefirware.com and check the regional code
Download Odin 4.43 ( u must!!!!! use 4.43 otherwise it´ll freeze while processing)
plug in ur usb cable and wait while odin checks ur phone
flash ur phone back to stock
(if u dont know how to use odin read a tut. or write a mail to me im an expert =))

Best place to look is xda wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
You need odin and ariesve.ops
And some stock ROM.

[Q] Samsung Galaxy s stuck in loop with Ultimate rom ?

Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2

Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA

Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??

can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551

charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck

guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?

Please help im stuck need step by step advice still a real novice ???

charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset

Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2

charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version

Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2

charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.

Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2

charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.

Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2

charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...

Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2

charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can

[Q] Galaxy Mini softbrick

Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:

Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
IT'S EASY!

ljcrisanto said:
IT'S EASY!
Click to expand...
Click to collapse
Download mode still work? why you no flash it to previous stock ROM then?

ljcrisanto said:
IT'S EASY!
Click to expand...
Click to collapse
Dafuq dude. You saying easy without giving solution, you dum* b*tt ! Your Mini are bricked too right ? While you asking are there is anyone said IT'S EASY ! like you did ? Heh... n00bies are trying to be a Master without having any knownledge.

Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
If the download mode still works then it is easy to do ....
Go to this page
Select Type [Smartphone]
Select OS [Android]
Select Model [your phone model]
Select Country [your country]
Then click on SEND
The page will show you current firmware and additional files ...
Download firmware ....
Download flash program from additional files ...
Then flash it ...

I cannot get the files
Originally Posted by shwe
the download mode still works then it is easy to do ....
Go to this page
Select Type [Smartphone]
Select OS [Android]
Select Model [your phone model]
Select Country [your country]
Then click on SEND
The page will show you current firmware and additional files ...
Download firmware ....
Download flash program from additional files ...
Then flash it ...
Click to expand...
Click to collapse
I cannot find the files to flash!

dxkpd
http://droidangel.blogspot.com/2011/05/samsung-galaxy-mini-s5570-original.html

Did it work?
Thanks but it failed even if i tried with odin and so samething happens

Zunmun said:
I cannot find the files to flash!
Click to expand...
Click to collapse
U need to register to see the Firmware and flashprogram download link ....
Zunmun said:
Thanks but it failed even if i tried with odin and so samething happens
Click to expand...
Click to collapse
can u tell little more details on what really happen ...?

What really happened
shwe said:
U need to register to see the Firmware and flashprogram download link ....
can u tell little more details on what really happen ...?
Click to expand...
Click to collapse
You know from the first post, the galaxy mini just kept showing that comupter to phone screen as shown before mentioned in the first post

thats the download mode with different screen
just connect and flash a 4 package file with odin

Try this Odin 4.42

download from here bit.ly/URolWT oh wait, don't download from there ... that's for UK stock roms ... wait I'll find for your country.
---------- Post added at 11:12 AM ---------- Previous post was at 11:04 AM ----------
Singapore stock rom bit.ly/URq9iz

asc1977 said:
I want to flash my gt-s5570i with original stock rom from sammobile with odin. But i have only a *.md5 file and odin wants more. Use odin 1.84
Can someone show me the way how. In the moment its bricked and didnt start.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
For GT-S5570i, only Odin version 1.84 and 1.87 can detect the phone.
Unfortunately both version doesn't have the one package option to flash ....
So u need to split the original md5 file into PDA, PHONE and CSC 3 package files.
As the splitting md5 file is quite complicated just download following 3 files,
all this files were used to flash my GT-S5570i
(split from Original Samsung Firmware Android 2.3.6 released on October 2012) ...
For PDA
Download this
For PHONE
Download this
For CSC
Download this
For Flash Program & pit file
Download this
Don't forget to UNCHECK the Re-partition box.
If u want your country firmware to be split then give me your link.
I will split and upload it for u.

try to recovery by odin.

bielphc said:
try to recovery by odin.
Click to expand...
Click to collapse
Hey, n00bs. Don't fool people by your half knownledge.
He already tried that. CAN YOU EVEN READ THIS TEXT !?

Zunmun said:
You know from the first post, the galaxy mini just kept showing that comupter to phone screen as shown before mentioned in the first post
Click to expand...
Click to collapse
If u access download mode, flash stock rom, (donwload one from http://forum.xda-developers.com/showthread.php?t=1551586 and flash) If it fails. Check your samsung drivers, thats often a reason why it fails, but i suppose u have them. Don't stop the flashing process until the odin says Pass in a blue box. If flashing fails even then.... its service center or if u can, use a usb jig. That's all i can think of..

Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
Full wipe and flash again with odin downloader..

Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
Flash new rom
Download
1.odin multidownloader
2.Samsung phone usb driver
3.Firmware
Visit http://samfirmware.com
Register to forum and you.can find them
Sent from my GT-S5570 using xda app-developers app

If ODIN doesn't work turn on your phone put it on the ground and pray until is working.
Boooooooo!.....did I scared you?

[Q] My Galaxy Note(SHV-E160L) is bricked...

before writing, I'm so sorry for my pooooor English.
I live in Toronto, Canada. I bought my Galaxy Note(SHV-E160L) from Korea, so change sim card from LG U+ to Rogers.
but when I sleep, Note encounter Unlimited Reboot.
so I try to repair in 3-way.
first, Factory reset. but I could make Download mode only, couldn't make Recovery mode.
so I try Samsung Kies Recovery mode, but Kies show me binery Error.
last, I want to use ODIN, but ODIN show me Error Message, too.
"Complete(write) operation failed"
What this means?
If it can't be repaired, I must send my cell phone to Korea.
I'm very embrassed...
please help me!!
and Merry Christmas for you

Is it sticking on factoryfs.img in ODIN ? this usually means its bricked which kernel where you on when you did the factory reset ?
I had a similar issue last week, stuck in odin, everything failing, I was convinced it was bricked, I manage to repair it by (no joking here) flashing a million wrong things in ODIN.... But DO NOT TRY THIS lol
try to flash a safe kernel through ODIN, and then see if it bring back recovery, then you can wipe and flash a new rom (hopefully)
otherwise there is the pit file method to revive from a brick, which works well, but loses around 3gb of internal sd space

hello
hello bro...
try this method:
download a stock gingerbread rom then go into download recovery, flash it with odin, root your phone.
from here you can install any custom rom, this is how i do when i got bootloop.

Thanks for your reply
hanzo777 said:
hello bro...
try this method:
download a stock gingerbread rom then go into download recovery, flash it with odin, root your phone.
from here you can install any custom rom, this is how i do when i got bootloop.
Click to expand...
Click to collapse
Thanks, but when I use ODIN, ODIN got a trouble..
when It start to flash, ODIN shows error message (Complete(write) operation failed)..
so even I can't try another Kernel Files..

Sigea said:
Thanks, but when I use ODIN, ODIN got a trouble..
when It start to flash, ODIN shows error message (Complete(write) operation failed)..
so even I can't try another Kernel Files..
Click to expand...
Click to collapse
Perhaps should follow closely the guide for using odin from Dr ketan should help:
http://forum.xda-developers.com/showthread.php?t=1424997
1. Installation
- Download stock ROM (should start with a GB rom), and extract it to .tar file
- Download Odin, open it
- select PDA tab and point to ROM file. Leave Re-partition, pit, CSC, Phone tab unticked.
- Switch off device, Put in download mode (Vol down + Home + Power)
- completely close kies, Anti virus if running
- Connect device to PC
- ID com port shud turn yellow (not shown in image)
Now hit Start
----
see how it goes.

Same problem as OP
Hello guys,
unfortunately, I have the same problem with my 32GB SHV-E160L as OP. Little backstory:
I bought the GNote in Korea and brought it back to my country. I successfully rooted it with one of the guides here on XDA (Tegrak kernel, no OC whatsoever). No problems so far, the phone worked for weeks and I was able to do what you can do with rooted phones. One day while surfing the net it just crashed and was stuck in a boot loop. This is where I am now.
I tried:
Go into tegrak recovery. result: It gets stuck on samsung logo, funnily the phone would establish a usb connection if plugged in (as if in download mode)
Reset from Kies. result: After beeing told by Kies to go into download mode, instead of flashing the new software it gives an error message in Korean about missing binaries (see attachment)
Flash from odin. result: the dreaded red box with "fail" appears after the NAND write command
Now, after doing my research here on XDA I found out that my emmc might have damaged partitions and I need a PIT file. Here's where I'm stuck.... I can't find a PIT file for my 32GB note, only for the N7000 or the I717. And I don't want to mess things further up... so if anyone here could provide me with a PIT file, or tell me how to fix the phone through other means I would be really grateful
Thanks in advance....

You should ask hg42 if he can make one - in his thread I read that he did this before even for other devices.
So try a pm or post in his thread. Good luck