Database Develop

[Q] HELP! Samsung Galaxy S I9000 not turning on

Guys, I desperately need your help! I'm a bit of a noob and tried to update my Galaxy S to 2.2 and forgot to uninstall Voodoo and unroot before doing so. My phone now won't switch on properly, displaying only a black screen and the capacitive buttons are lit up. I have downloaded odin but don' t know what to do from here. I have searched EVERYWHERE for what files I need to download to flash it to stock firmware. PLEASE PLEASE help, I'm so lost! Thanks...look forward to replies

Take out battery, sim and SD, open up Odin and plug USB cord into a USB port. Now plug the battery back in your phone and DO NOT TURN IT ON! hold the two volume rockers(maybe difdrent for you, I have a Captivate) and plug your phone into the USB cord. You should now be in download mode with Odin running. Flash a working firmware(get them from samfirmware.com) and you'll just have an working phone running whatever you decided to flash. I think your new so ill warn you right quick: read, alot!
PS: might wanna post this in q&a. People tend to get p-ssed off when you post non-development stuff in this subforum.
Sent from my GT-I9000 using XDA App

Searched everywhere!? Can you get into download mode? If you can grab the stock firmware from somewhere like samfirmware and flash the files using odin. If you search "everywhere" again I'm sure you'll find a good guide on how to do this.
You've also posted this in the wrong section

First off are you looking to flash the i9000 or the i9000m below are the instructions for the i9000m from Canada.
Here is a Tutorial if you dont want to follow my steps below:
http://forum.xda-developers.com/showthread.php?t=853950
Ok download mode is your down volume button, power and home key all at once, if you cant get here you are f'd. So power off your phone, take your sim and sd card out, place battery back in, then hit the 3 buttons to get into download mode.
Go here:
http://forum.xda-developers.com/showthread.php?t=846913
Get odin and the rom you want, if you are on Bell or Sasktel use the link above and download the proper rom either 2.1(i9000ugjh2) or 2.2 (i9000ugjk3), it's under canada you can't really get that wrong.
Once you have both open odin v1.7, put your phone into download mode and plug it in, you have to have odin open before plugging it in, you should see the driver installing and when it is ODIN will show your device under ID:COM, it will be yellow something like c:[COM15] (note it doesn't have to be 15) just has to show added!! under Message.
Now click PDA button and find the rom you downloaded. Make sure Re-partition is NOT checked and that is it, click Start. You can have autoreboot checked and reset time. NOTE: DO NOT USE PIT FILE. All you have to do is find the rom via PDA button, and click start.
It should flash your rom, post back if you ahve issues, I had a few issues and know this pretty good, I also used a pit file and thought I bricked my phone but it's ok. Hopefully you can get into recovery mode also which is vol up, power and home.

Hi guys,
Thank you all so much for the help!! Thanks to you my phone is now up and running on 2.2 firmware I9000XWJPA and its schweeet.
Legends.
P.S. Sorry for post in the wrong section, I'm new around here.

afrika23 said:
Hi guys,
Thank you all so much for the help!! Thanks to you my phone is now up and running on 2.2 firmware I9000XWJPA and its schweeet.
Legends.
P.S. Sorry for post in the wrong section, I'm new around here.
Click to expand...
Click to collapse
Nice job on the working phone! I reccomend flashing the ULK kernel. It basically includes anything ever whipped up kernel-wise. Also, I think you'ld like Doc's V9 Jpa and to top it all off flash the Jk3 modem(unless you live EX-USA. then flash JPP). These are all CWM flashable so no more Odin hassle.
Sent from my GT-I9000 using XDA App

IMHO hardcore's K10h kernel is the best.
Sent from my GT-I9000 using XDA App

[Q] Samsung Tab P1000 not powering on

hi i have a Samsung Tab P1000 and now its not powering on after i forced to switch off from downloading mode,because I'm trying to update from Froyo 2.2 to gingerbread 2.3.3 but after following the instruction from opening the odin, putting the pit file and PDA file and i click the start its only showing the setupconnection.......please help me.....thank you

did you try to charge it? If not do that and flash again.

yes....i tried to put in charge and it showing like this in the photo but if i remove from tha charger i cannot powering on and the icon will disappear.....

i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off

Samsung gtp 1000
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
hi guy i ve the same problem, pls i just need to know if is an hard brick or just a soft.
I ve read many trhead on forum and i ve seen that if is hard brick i must use resurrection program but i cant find no link.
pls some one can post me? tnx

cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
That diagram you had is the same thing as the download mode. So treat it as such and flash your rom and kernel normally and it should work. I had the same problem before. To be sure, tried the following thread. Go to the 3rd post in this thread and follow the installation instruction. It will work. http://forum.xda-developers.com/showthread.php?t=1382055

I get that every now and then too. I reinstall the drivers (included with Kies), and reboot the computer. After that it will work.

Froyo to Gingerbread -- Please be extra careful when flashing
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
Does ODIN still recognize your Tab? If you are upgrading from froyo to gingerbread, you may need to load new PIT file as well as new dbdata.rfs.
If ODIN still recognize your Tab, try to download your choice of firmware again with PIT file included. I'll attach a working PIT for you.
Note: Please extract the attached file to get the .PIT file and put it on PIT field on ODIN along with your choice of firmware you are flashing.
Once you are done and reboot, mostlikely you'll be in a boot-loop stuck at SAMSUNG screen. Now reboot to download mode again, then flash the DBDATA.rfs.tar I attached on the following post in PDA field on ODIN:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121

i dont have the icon

wakak make sure you got the proper Samsung driver installed!

[Q] Samsung Galaxy s stuck in loop with Ultimate rom ?

Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2

Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA

Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??

can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551

charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck

guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?

Please help im stuck need step by step advice still a real novice ???

charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset

Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2

charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version

Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2

charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.

Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2

charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.

Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2

charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...

Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2

charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can

Samsung Galaxy Ace Original Firmware installing HELP!!!

Hi Guys,
I'm New to this Forum and new to an Android .
I have Samsung galaxy ace , I installed ICS ROM , but before that I didn't do a back-UP to my own firmware
So now i just want to get back into my original firmware , somewhere I read that I can do that Using KIES (original from samsung) , and ODIN .
So can you guys give me a way to get back to Gingerbread 2.3.X , please give me a video or tell me step - by - step how to get back into my Firmware .
Please ! :crying:
(and how to backup all my data , apps, messages, contacts)

Lol, newb
You need to download Odin Multidownloader v4.38
Then get the file "cooper v1.0.ops"
Now that you have downloaded both go to samfirmware and download a firmware for your galaxy ace ( download the latest one)
After it finishes downloadibg, extract the .md5 file and open odin.
Then put the .ops file you downloaded in the .OPS part and select " one package" and choose the .md5 file
Reboot your phone into downloading mode (power buton+ volume down+home button) and plug it to your computer wait till Odin recognises your phone and start flashing.
Make sure your phone is atleast 50% charged
After Odin says its done disconnect from computer and shutdown phone and load into recovery ( if you cant shutdown, simply remove battery) and wipe to factory settibgs and wipe cache. Reboot and you should official stock ROM.
This guide is ver simple and with not many details but there are many guides on the internet.
So please use the search bar before asking.
Sent from my GT-S5830L using xda premium

Tovagulet said:
Lol, newb
You need to download Odin Multidownloader v4.38
Then get the file "cooper v1.0.ops"
Now that you have downloaded both go to samfirmware and download a firmware for your galaxy ace ( download the latest one)
After it finishes downloadibg, extract the .md5 file and open odin.
Then put the .ops file you downloaded in the .OPS part and select " one package" and choose the .md5 file
Reboot your phone into downloading mode (power buton+ volume down+home button) and plug it to your computer wait till Odin recognises your phone and start flashing.
Make sure your phone is atleast 50% charged
After Odin says its done disconnect from computer and shutdown phone and load into recovery ( if you cant shutdown, simply remove battery) and wipe to factory settibgs and wipe cache. Reboot and you should official stock ROM.
This guide is ver simple and with not many details but there are many guides on the internet.
So please use the search bar before asking.
Sent from my GT-S5830L using xda premium
Click to expand...
Click to collapse
Thanks so Much , as I've noticed I'm a Newbie on These ANDROID DEVICES, the other thing is that I need a Video if someone could find it bcs I'm afraid doing something wrong :-\ :angel:

blinqipa said:
Thanks so Much , as I've noticed I'm a Newbie on These ANDROID DEVICES, the other thing is that I need a Video if someone could find it bcs I'm afraid doing something wrong :-\ :angel:
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=xae93GfDCjw
As you can see, it's a very easy procedure. Also, "downloading mode", as said by Tovagulet, is activated by turning the phone off, and power buton+ volume down+home button.
Good luck

Nice explanation
Tovagulet said:
Lol, newb
You need to download Odin Multidownloader v4.38
Then get the file "cooper v1.0.ops"
Now that you have downloaded both go to samfirmware and download a firmware for your galaxy ace ( download the latest one)
After it finishes downloadibg, extract the .md5 file and open odin.
Then put the .ops file you downloaded in the .OPS part and select " one package" and choose the .md5 file
Reboot your phone into downloading mode (power buton+ volume down+home button) and plug it to your computer wait till Odin recognises your phone and start flashing.
Make sure your phone is atleast 50% charged
After Odin says its done disconnect from computer and shutdown phone and load into recovery ( if you cant shutdown, simply remove battery) and wipe to factory settibgs and wipe cache. Reboot and you should official stock ROM.
This guide is ver simple and with not many details but there are many guides on the internet.
So please use the search bar before asking.
Sent from my GT-S5830L using xda premium
Click to expand...
Click to collapse
+1

Thanks mate!!
i try to reset the original firmware of my Galaxy Ace gt-s5830, but i got Optus firmware for Australia.
I needed Vodafone firmware, can you please advice me how would i set up to Vodafone Firmware..
Thanks

er.patel said:
Thanks mate!!
i try to reset the original firmware of my Galaxy Ace gt-s5830, but i got Optus firmware for Australia.
I needed Vodafone firmware, can you please advice me how would i set up to Vodafone Firmware..
Thanks
Click to expand...
Click to collapse
Hi, give a look at this
Hope I helped

Hi Guys,
i had installed XSA firmware for Australia for Samsung galaxy ace GT-S5830, as there is no perticular Vodafone AUS firmware. it installed perfectly, but i couldnt connect to the 3g network.
can anyone plz help me to setup this .
Thanks

probably its APN settings, see thishttp://support.vodafone.com.au/articles/FAQ/APN-Settings, or you can google it.
Hope i helped
Sent from my GT-S5830 using xda app-developers app

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.

dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium

RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?

dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.

Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!

bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.

dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).

Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this

Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app

Why will it be hardbricked if the custom roms are based on s5830i stock roms?

But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium

Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .

Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app