Database Develop

[q] help im screwed

DID I JUST BRICK MY PHONE??
tried flashing the i9000 rom... got messed up sometime after flashing csc and pda.... now i can boot to recovery menu and get odin to recognize but im getting an error
copy_multi_carrier from: ATT
multicsc : can not acces to /system/csc/ATT/system/
copy_common_data
then it stalls.. my power button doesnt work to reboot system now...
Even though odin recognizes i hit start and nothing happens..
can anyone help.. i will donate and make it worth your time..

No you didn't brick your phone, you need to follow the I9000 guide in the stickied threads. You need to load a Captivate kernel before fully rebooting your phone.
First off get your phone back into download mode. Pull battery and usb cable, restart Odin, then follow this method to get you into download mode, put in battery, hold down both volume buttons, keep holding them and plug in the USB cable.
First when you flash a I9000 rom make sure you uncheck autoreboot on Odin.
When this done when you flash the Rom it will say Restet in Odin. At that time pull your battery and USB cable.
Restart Odin and load the Captivate kernel. Put you battery in, hold both volume buttons, keep them held and plug in the USB cable, should go into download mode. Start Odin, and it should be fine to let it autoreboot.
I missed something it will be in the stickied thread.
Sent from my SAMSUNG-SGH-I897 using XDA App

can you clear something up is Android System Recovery the same as download mode??

ok this thread can be deleted.. im a noob.. kjpdx throw me a link to donate.. i figured it out by myself but atleast you replied..

Two different modes. Download mode shows an Android holding a shovel and Recovery mode is where you would install update.zips.
Needs to be in Download mode when installing roms and kernels with Odin.
Sent from my SAMSUNG-SGH-I897 using XDA App

Dont worry about it, glad i could help.
Sent from my SAMSUNG-SGH-I897 using XDA App

Hi:
I have the same problem of my Galaxy S. It is stuck in this screen saying
copy_multi_carrier from: ATT
multicsc : can not access to /system/csc/ATT/system/
etc. etc.
I boot it to the download mode as instruction, but the Kies always shows connecting device, and it never gets connected. The Odin shows no com port or device for me to load the firmware. Can anyone help? Any help will be appreciated.

uehsgerg said:
Hi:
I have the same problem of my Galaxy S. It is stuck in this screen saying
copy_multi_carrier from: ATT
multicsc : can not access to /system/csc/ATT/system/
etc. etc.
I boot it to the download mode as instruction, but the Kies always shows connecting device, and it never gets connected. The Odin shows no com port or device for me to load the firmware. Can anyone help? Any help will be appreciated.
Click to expand...
Click to collapse
You can't have Kies and Odin running at the same time =P

^lol that solved my problem too! thanks!

Zilch25 said:
You can't have Kies and Odin running at the same time =P
Click to expand...
Click to collapse
Will try it later. Thanks

It is fixed. Thank you for the help. I just need to lauch Odin first prior to plug-in my phone. Now, I don't have bricked Galaxy anymore. Thanks

KJPDX said:
No you didn't brick your phone, you need to follow the I9000 guide in the stickied threads. You need to load a Captivate kernel before fully rebooting your phone.
First off get your phone back into download mode. Pull battery and usb cable, restart Odin, then follow this method to get you into download mode, put in battery, hold down both volume buttons, keep holding them and plug in the USB cable.
First when you flash a I9000 rom make sure you uncheck autoreboot on Odin.
When this done when you flash the Rom it will say Restet in Odin. At that time pull your battery and USB cable.
Restart Odin and load the Captivate kernel. Put you battery in, hold both volume buttons, keep them held and plug in the USB cable, should go into download mode. Start Odin, and it should be fine to let it autoreboot.
I missed something it will be in the stickied thread.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks! I couldn't get download mode and this is the only thread online to help. I received this error when trying to install the voodoo lagfix while running cognition 2.2 beta 7. (for some reason, my cognition did not have the lagfix built in)

cliffgardner said:
Thanks! I couldn't get download mode and this is the only thread online to help. I received this error when trying to install the voodoo lagfix while running cognition 2.2 beta 7. (for some reason, my cognition did not have the lagfix built in)
Click to expand...
Click to collapse
That reason is that voodoo doesn't work with 2.2
For the sake of your wallet, I would read the threads more carefully before flashing new roms if I were you. I'm not trying to be a ****, but this issue was addressed many times in the cognition thread. I'm all for learning from others on this forum after they make the mistakes

[Q] Captivate Boot Loop after Odin one click

Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob

Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).

http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7

please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...

I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.

That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob

I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!

went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!

odin doesnt reconize phone

which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.

And make sure you have the correct drivers installed. CRUCIAL.

Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?

^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App

Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.

lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2

ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.

^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium

galaxy tab sgh-t849 I need professional help

I just got this tab and like every other android i get I rooted it. I used superoneclick -- worked fine. then downloaded cwm and flashed the recovery. of course when i went into recovery it was 3e so i couldnt actually use cwr without the bypass fix. Anyway -- i used some recovery fix -- which i think was for a vibrant -- wasn't thinking. Once it rebooted into recovery it showed some yellow letters then went blank. The computer still recognizes it but the tab won't boot. i can reset it by turning it off and on but it only shows tmobile splash and the yellow letters scrolling in recovery then goes blank again. please help. i've been reading everything but no one seems to have had this problem.
thank you very much

Put it in a blender, jk, send it back to samsung.
Sent from my SGH-T849 using XDA App

atomiq said:
Put it in a blender, jk, send it back to samsung.
Sent from my SGH-T849 using XDA App
Click to expand...
Click to collapse
is that really my best option??
i figured there would be some manual way to reflash the recovery or maybe complete firmware with a recovery built in. it will still go into download mode -- like i said the computer still recognizes it but I just don't know where to start. ive never used odin and not a pro at adb/sdk but i can usually follow directions pretty well. i've rooted g1's, mytouch 3g fenders slides, inspires, atrix, vibrant, captivates so i'm not giving up yet. i know someone is willing to help.

from the off position, when you press and hold volume down then a moment later without letting up from volume down also hold power button until lights turn on, what does it do?

download all below zips, and unzip them
run it usb driver. say yes to everything. plug in tab to computer in download mode. let it install tab drivers
unplug tab.
open odin
Watch the first box on the left. ID:COM
plug in tab to comp in download mode.
That box should light up yellow, that means your tab in connected and ready to go.
place unzipped stock rom in PDA.
Press Start.
When done it should say all threads completed, and your tab should restart on its own.
Let it boot, and welcome back to stock Tmobile
uploads are taking a bit, be patient.
Do you want stock 2.2, or 2.3?

yes -- it goes into download mode
sounds promising -- thank you -- i will keep you updated on the progress.
prefer 2.2 where it was.
thanks so much

REMOVED!!!!!
here is dropbox of everything you need. It is a stock firmware, no root.
once we get you back up and running, we will go from there.
please let me know the moment you have downloaded this zip, as it sucks my bandwidth.

Drop box removed. Avaiable upon request
Sent from my GT-P1000 using XDA Premium App

so? i would like to request the download then...
the files being removed?

gottarootit said:
so? i would like to request the download then...
the files being removed?
Click to expand...
Click to collapse
i will put it up again for an hour. Gimmie a second, gonna add stock tmobile 2.2 also

here ya go, JMK is stock Gingerbread, And the other is 2.2. If you are going to 2.2, you dont need to worry about any of the modems in the zip folders.
just open odin and and place stock tar file
REMOVED!!!!!!

ssserpentine said:
here ya go, JMK is stock Gingerbread, And the other is 2.2. If you are going to 2.2, you dont need to worry about any of the modems in the zip folders.
just open odin and and place stock tar file
REMOVED!!!!!!
Click to expand...
Click to collapse
beautiful --- just flashed with odin and went through with no problems. once back up i re-ran the root and unlock. now i'm gonna wait to flash cwr until i'm good and sure i know what i'm doing. btw -- i flashed a new kernel with recovery before the full restore and that didn't help. i'm not positive but i guess thats how you get clockwork rec to work.?
thanks so much.

can someone help me with the same issue. I am getting no boot on this tablet. I have tried the volume button and power with no luck. Can someone send me a link for the stock sprint restore.

gottarootit said:
beautiful --- just flashed with odin and went through with no problems. once back up i re-ran the root and unlock. now i'm gonna wait to flash cwr until i'm good and sure i know what i'm doing. btw -- i flashed a new kernel with recovery before the full restore and that didn't help. i'm not positive but i guess thats how you get clockwork rec to work.?
thanks so much.
Click to expand...
Click to collapse
Which did you go with? 2.2 or 2.3.3?
Let me know what your tab currently says in settings, about device.
Hold down the back arrow, and while still holding a second later, press you powerbutton. Let go.
Shoulda taken a screen shot. Uoload it here or just write it down.
I can guide you from there.
"42"

mnbgibbs said:
can someone help me with the same issue. I am getting no boot on this tablet. I have tried the volume button and power with no luck. Can someone send me a link for the stock sprint restore.
Click to expand...
Click to collapse
get the samsung usb drivers. Included in keis, but google and download just usb driver if you dont have kies.
Instal.
Plug in tab.
Let drivers instal.
Download and open Odin.
There is.a box on the left below an open window, is it blank? (no yellow color?)
If so, your okay so far. If not and it has a yellow, still good.
Plug in tab to comp.
Did a yellow box appear? Or a second one if ine allready there?

hi, i bricked my t849 by wrong flashing..still can go to download mode.can you upload file again to recover my PDA

sharaz191 said:
hi, i bricked my t849 by wrong flashing..still can go to download mode.can you upload file again to recover my PDA
Click to expand...
Click to collapse
i posted the link for ya there .. check it

after update stuck at galaxy tab logo...any other help sir

ok download stock rom froyo and not Gingerbread

where can i find froyo version?

help bricked phone

Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.

You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.

See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA

http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA

DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...

Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.

gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.

What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA

Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.

wrong firmware on i9000

I accidentally installed a capitvate i897 firmware (Android 2.3.4, AT&T branded) on my i9000. It looks like an US firmware, mine should be German.
Since installation of the new firmware I can't use the usb-connection anymore - some seconds after plugging the phone resets and stops working until I unplug the cable again. The 3-button-trick doesn't work anymore either, probably because the captivate hardware is quite different.
So... now I am desparately looking for any help or hints how I can get my phone rootet. I think that would help a lot to install a proper firmware again (via mobile odin).
Any hints?

Gingerly said:
I accidentally installed a capitvate i897 firmware (Android 2.3.4, AT&T branded) on my i9000. It looks like an US firmware, mine should be German.
Since installation of the new firmware I can't use the usb-connection anymore - some seconds after plugging the phone resets and stops working until I unplug the cable again. The 3-button-trick doesn't work anymore either, probably because the captivate hardware is quite different.
So... now I am desparately looking for any help or hints how I can get my phone rootet. I think that would help a lot to install a proper firmware again (via mobile odin).
Any hints?
Click to expand...
Click to collapse
You wouldn't really be going wrong by flashing back with Odin. I'd recommend flashing stock JW4 which is the latest European Gingerbread and rooting with the JW4 CF-ROOT.

I would have flashed already if I knew how to do it USB doesn't work, and entering recovery mode (if it is available, which I doubt) doesn't work either because I can't press the right buttons.

Gingerly said:
I would have flashed already if I knew how to do it USB doesn't work, and entering recovery mode (if it is available, which I doubt) doesn't work either because I can't press the right buttons.
Click to expand...
Click to collapse
u need to download 3 file odin from here http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
and u will need also odin program from here http://www.filecrop.com/Odin-1.85.html after u download the firmware extract it and open odin
then put code in pda box modem on phone box an csc on csc box after that push vol down+home+power for download mode conect your phone to the computer and wait for yellow light in the program after thet press start good. luck btw if its only one file firmware put it on pda only
and if download mode not work with 3 button comb try jig device

Thanks for your detailed answer. But the 3-button-combo doesn't work. My guess is that the phone expects the captivate combo (volume up + volume down + power) which isn't possible on an i9000 device.
A jig might be worth a try, though I am worried, because the phone crashes always as soon as it get's power via usb (phone-pc or phone-power suppy, in both cases the phone crashes).
Is it possible to root the phone via wifi or right on the phone via app or some weird linux command line stuff?

You could try z4root? I don't think it will work but worth a try
Sent from my GT-I9000 running remICS-UX using XDA premium

Gingerly said:
Thanks for your detailed answer. But the 3-button-combo doesn't work. My guess is that the phone expects the captivate combo (volume up + volume down + power) which isn't possible on an i9000 device.
A jig might be worth a try, though I am worried, because the phone crashes always as soon as it get's power via usb (phone-pc or phone-power suppy, in both cases the phone crashes).
Is it possible to root the phone via wifi or right on the phone via app or some weird linux command line stuff?
Click to expand...
Click to collapse
Yes, I think it's worth a try, to download a SGS Kernel and try the App "SGS Kernel Flasher" (Search in Playstore, can't post a link) Maybe it works! I think you won't be able to boot your system after that, but maybe you can use the 3 button combo after that.
But first you have to find a way to root the phone... i can't find a app for that atm, maybe someone else found one?
------------------------------------------------------------------------------
EDIT
------------------------------------------------------------------------------
If you get root working, you can safely use this to flash the right firmware for your phone: http://forum.xda-developers.com/showthread.php?t=1347899
It's Odin on your mobile, so you can copy the files via an ftp or something like this and flash them to solve ur problem.
The other method I listed is a bit unsafe i think...

Actually, you can press Volume Up and Volume Down at the same time on a SGS. I tried it, because CM9 has the feature to change ringer mode this way.

nahum05 said:
u need to download 3 file odin from here http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
and u will need also odin program from here http://www.filecrop.com/Odin-1.85.html after u download the firmware extract it and open odin
then put code in pda box modem on phone box an csc on csc box after that push vol down+home+power for download mode conect your phone to the computer and wait for yellow light in the program after thet press start good. luck btw if its only one file firmware put it on pda only
and if download mode not work with 3 button comb try jig device
Click to expand...
Click to collapse
Hello, More or less had the same problem.
To tell you the history: updated my samsung galaxy S I9000 to ICS, was not happy with it and f*cked up after that.
Wanted to install older firmware over ICS, telephone dead and than came on this forum and used
stockrom of I896 from developer TRusselo : http://forum.xda-developers.com/showthread.php?t=979133
now phone thinks he is a canadian I896.... Tried the above steps on PDA... unpacked ok but now phone keeps rebooting after it shows the samsunglogo....
did i miss a final step or did i do something wrong?
Thanks for your help in advance...

@calumn96: I tried z4root, it doesn't work..
@coroner21: wow! I always thought the both volume buttons would exclude each other. Now I can enter CWM.
Is there a way to root the i9000 in CWM? Or even better, to install a stock i9000 firmware?
Current situation: i897-firmware (2.3.4 uckh3) - I guess I need a root patch for this firmware.

Gingerly said:
@calumn96: I tried z4root, it doesn't work..
@coroner21: wow! I always thought the both volume buttons would exclude each other. Now I can enter CWM.
Is there a way to root the i9000 in CWM? Or even better, to install a stock i9000 firmware?
Current situation: i897-firmware (2.3.4 uckh3) - I guess I need a root patch for this firmware.
Click to expand...
Click to collapse
If you get a rooted i879 kernal you could try flashing that in cwm? You could try flashing a custom gb ROM from it (put files on a as card then in phone so not to use USB)
Sent from my GT-I9000 running remICS-UX using XDA premium

Gingerly said:
@calumn96: I tried z4root, it doesn't work..
@coroner21: wow! I always thought the both volume buttons would exclude each other. Now I can enter CWM.
Is there a way to root the i9000 in CWM? Or even better, to install a stock i9000 firmware?
Current situation: i897-firmware (2.3.4 uckh3) - I guess I need a root patch for this firmware.
Click to expand...
Click to collapse
Go into download mode
for i9000 it's volume down + home + power
for i897 it's both volume keys, and with the usb cable into the phone + power.
If you see the yellow triangle with and android and a shovel that's it!
Then get a stock firmware for i9000 on www.smafirmware.com and flash it through odin with the .pit + 3 files (PDA + MODEM + CSC).

@calum96: I will give it a try.
@-m3ta- : USB doesn't work, so any tips involving a usb-cable won't help :/
Another thing I realized is that recharging is barely possible...

Odin and Samfirmware is the way to go
Sent from my GT-I9300 using Tapatalk 2

Gingerly said:
@calum96: I will give it a try.
@-m3ta- : USB doesn't work, so any tips involving a usb-cable won't help :/
Another thing I realized is that recharging is barely possible...
Click to expand...
Click to collapse
I don't understand why 3 combo key, USB won't work. I had flash a captivate firmware onto the i9000 and the regular trick worked

@MrAndroid12: I don't understand it either. But the phone crashes as soon as the usb is plugged. Recharging didn't work at all, the phone just got hot and that's it.
@calum96: thank you! I flashed dmore 3.3 and so far it looks good. No usb-crashes anymore and the phone acts as it should. There is still an AT&T-brand, but that's still better than a useless phone

Gingerly said:
@MrAndroid12: I don't understand it either. But the phone crashes as soon as the usb is plugged. Recharging didn't work at all, the phone just got hot and that's it.
@calum96: thank you! I flashed dmore 3.3 and so far it looks good. No usb-crashes anymore and the phone acts as it should. There is still an AT&T-brand, but that's still better than a useless phone
Click to expand...
Click to collapse
You might be able to change the brands thing in build.props? Not sure tbh

So is it on i9000 firmware now? or is it just rooted? And is USB working now?
Sent from my GT-I9000 running remICS-UX using XDA premium

Everything works like a charm now
i9000 firmware (slim ics right now), usb works, recharging works and people can finally call me again (didn't work before either)
Thanks again for all your help, guys!

Glad to hear try remics its really good smooth with a Samsung feel
Sent from my GT-I9000 running remICS-UX using XDA premium