Database Develop

[Q] NEED HELP!!! Bricked i9001

Guys i need help!!!
I'm a fresh new android user especially SGS+...after rooting the phone, i downloaded an app ERIS MARKET!! I tried using it everything went so good then it asked me to restart the phone...and that's it!!! it shows the samsung logo then galaxy s plus then turns off again and again samsung logon..samsung s plus and so on...!!!
I tried the factory reset but nothing happened!!
Now i've lost all the data and had my phone bricked ((
Any help??

Use odin to reflash. Search for your model than download everything and follow guide or if you have backup on your phone.

ShahirHabib said:
Guys i need help!!!
I'm a fresh new android user especially SGS+...after rooting the phone, i downloaded an app ERIS MARKET!! I tried using it everything went so good then it asked me to restart the phone...and that's it!!! it shows the samsung logo then galaxy s plus then turns off again and again samsung logon..samsung s plus and so on...!!!
I tried the factory reset but nothing happened!!
Now i've lost all the data and had my phone bricked ((
Any help??
Click to expand...
Click to collapse
Hold on, you are not totally bricked as such, if your phone can still boot up like that there is still much life in it. in this case Odin is your buddy. Download your stock firmware according to your region (im not sure if im allowed to post links to other sites, so i wont),
Download Odin (find out how to use it, with the PIT file and your Stock ROM)
Launch Odin (from your PC ofcoz)
Switch off your phone by removing the battery
Put the battery back in, hold HOME button + Volume Down + then POWER button, Your phone should go into download mode.
Connect you phone to the PC using your USB cable, (odin should highlight a yellow square to signal you that your phone has been detected)
Put all the file you downloaded into thier rightful place and then flash.
I have just jumbled it up to give you a general direction, there should be more detailed infor on this site, keep looking and good luck

Tar file
thanks alot guys..
I've downloaded the ODIN and now i've the PIT file but where can i get the TAR file for my i9001?

take a look at samfirmware.com , there you can get the stock roms you want

stock firmware
how can i know the stock firmware on my phone? it doesnot start up so i can't get into the settings or something? and i'm sry but i don't get what does the region do with the firmware?
I'm so sorry but i'm really a very new android user
Thank you so much

search this forum and you find tens of tar files

1. Watch this Video w w w.youtube.com/watch?v=JmvCpR45LKA
2. Just register here w w w.sammobile.com/firmware/ when done click firmware and download what you need!

alzaq said:
search this forum and you find tens of tar files
Click to expand...
Click to collapse
As it was already mentioned go to samfirware.com and look for a stock rom espeacially for your region.
If you dont know wich to use, try to google the different country codes.
Further you should download odin 4.43 (u must use 4.43) and flash it back to the stock.
Like if it helped u unbrick ur phone
---------- Post added at 09:39 AM ---------- Previous post was at 09:34 AM ----------
ShahirHabib said:
how can i know the stock firmware on my phone? it doesnot start up so i can't get into the settings or something? and i'm sry but i don't get what does the region do with the firmware?
I'm so sorry but i'm really a very new android user
Thank you so much
Click to expand...
Click to collapse
You only have to know that ur owning a I9001
Go to samefirware.com and check the regional code
Download Odin 4.43 ( u must!!!!! use 4.43 otherwise it´ll freeze while processing)
plug in ur usb cable and wait while odin checks ur phone
flash ur phone back to stock
(if u dont know how to use odin read a tut. or write a mail to me im an expert =))

Best place to look is xda wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
You need odin and ariesve.ops
And some stock ROM.

[Q] Samsung Galaxy s stuck in loop with Ultimate rom ?

Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2

Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA

Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??

can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551

charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck

guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?

Please help im stuck need step by step advice still a real novice ???

charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset

Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2

charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version

Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2

charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.

Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2

charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.

Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2

charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...

Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2

charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can

My Note updated with XXLPY now no google service or play store :S

I have update my Samsung Galaxy note n7000 from GB to ICS from phone not from KIES but right after update i can't access play store or any google services. I have factory restore my phone from both the option and 3 buttons restore from recovery. Now when i try to add google account its says can't establish network connection. I have tried to add account from Youtube but no success.
My current version is ICS 4.0.3
PDA:N7000xxlpy
Phone: N7000xxlpt
Csc: n7000oxxlp5
I am unable to log inn any of the account like facebook, youtube or chat, Even if i download the .apk from any other source its downloaded but its does not fetch download the from Internet.
I have checked the phone on many different router there is no problem in wifi connectivity.
While searching on google XXLPY is the culprit here and its the bad update which i got from the OTA now what to do next, i have reset my phone two or three time but all in vain or may be i am lucky that i don't get my device bricked

Dont reset while u r in ICS,for google account try to us ur data connection not ur wifi for adding account, it may work..
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗

HALT!
You're on ICS - Stop messing about with Factory Resets / Recovery etc..
Downgrade to Stock GB via ODIN - Do your wipes - Make sure it's working in GB - Update to ICS / Flash a Stock ICS in ODIN..

Mobile network is not working too, can any one tell me how to downgrade it or is it safe to flash it with another kernel ??

Goto the stock ROM thread and follow Dr. K'S instructions... It's all there, if you need any further help let me know...
Sent from my GT-N7000 using xda app-developers app

CJSlim79 said:
Goto the stock ROM thread and follow Dr. K'S instructions... It's all there, if you need any further help let me know...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply all these Emmc error is going over my head my phone is in warranty should i gave it for warranty claim or try to reflash it with another stock ICS rom ??

Take time. Read through this. Read through this again. Thus will teach you how to reflash safely using odin.
http://forum.xda-developers.com/showthread.php?t=1801341

Have you used Odin before ?

numbnutsuk said:
Have you used Odin before ?
Click to expand...
Click to collapse
yes many time i have used it on my Galaxy Ace but that was low end phone and i don't want to mess with this phone. Its all just because of OTA update from Samsung
My question is that should i have to flashed it with Gb first if yes then which region is safe to flash it with.
P.S i have ask a friend who has flashed it from ICS to ICS of different firmware by using abssyynote kernel :S

This is what my friend told me to do is it safe ?? or can be done in this way ??
i dont need to tell you that you have to be very careful in following these steps,
although i have tried them 5 times on 5 different notes successfully still mistakes can be dangerous so be careful and follow them to the letter and take your time to read before you start
also if you can do this with a laptop its better than a pc because if the electricity cut out it could mess up the phone. its safer to have a battery, btw just as i finished this line we had a black out here lol electricity cut off for the whole block
copy AbyssNotekernel42.zip and CWM.zip to the phone
power off the phone and take the battery out to make sure its off
power it back on holding volume up + home + power to go to recovery mode
choose install zip from sdcard
select the CWM.zip and choose yes install
you will get clock work mode interface then choose install update zip from sdcard again
select AbyssNotekernel42.zip and install it
power off and remove the battery and put it back
power on holding volume up + home + power to go to recovery mode again
this time it the abyss kernel recovery and it works with the touch screen
it is safe to do a factory reset from here so do it
then power off and remove the battery again and put it in
this time power on the phone with volume down + home + power to go to download mode
start Odin on the pc then connect the phone in download mode
click on PDA and then select the rom XXLPD file "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar.md5" and click start
when the phone restarts make sure the samsung logo apears then remove the battery so that it doesnt boot up
start the phone again in download mode volume down + home + power
select the speedmod kernel file and flash it to the phone same way you flashed the rom in PDA select "speedmod-kernel-n7000-ics-k3-11-Odin.tar" then click start
when the phone restarts again remove the battery after the samsung logo apears
power on the phone into recovery again for the last factory reset volume up + home + power
do the factory reset and reboot the phone

There are a few steps missing there. I would go to the link I posted above.
First download Odin 1.85 from link A. 1

Next download pre rooted GB from A.8 and flash it using Odin under pda

Then down load lpy open German 4.0.3 which you want from B.1 and flash in PDA using Odin.
That's it your done!
You comfortable with that?

numbnutsuk said:
Then down load lpy open German 4.0.3 which you want from B.1 and flash in PDA using Odin.
That's it your done!
You comfortable with that?
Click to expand...
Click to collapse
Thank you very much i will try that

Ask if u need any further help. Let me know how you get on

numbnutsuk said:
Next download pre rooted GB from A.8 and flash it using Odin under pda
Click to expand...
Click to collapse
Can you tell me what do you meant by A.8 in GB :S

OK got it what does A.8 means thanks once again

section A number 8

Then you'll find the ics rom from section B useful guides 1 stock ics roms

can you tell me from where i have to get a PDA file for GB rom ??

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.

dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium

RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?

dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.

Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!

bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.

dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).

Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this

Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app

Why will it be hardbricked if the custom roms are based on s5830i stock roms?

But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium

Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .

Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

[Q] Galaxy Ace - Download mode and stock rom doesn't work

I upgraded my Samsung Galaxy Ace s5830c to 4.2.2, run.
After I moved to 4.3 and also worked, but after changing some things in build.prop (Root Explorer), my phone stopped getting into Download mode, It is a gray screen forever. Now my phone is stopped ( Loop Infinite )
I can not do unroot: Installation Aborted.
When I try to change my android version (install zip from sd card), appear this: Installation Aborted
I did found the build.prop backup, and I can not go back to stock rom by odin, because as I said, the screen turns gray when I try to enter download mode.
Help me, will have to go back stock rom, downloading a backup. (My friend did it, but I did not think and do not know how to do)
Thanks, beautiful site admin

fernando15j said:
I upgraded my Samsung Galaxy Ace s5830c to 4.2.2, run.
After I moved to 4.3 and also worked, but after changing some things in build.prop (Root Explorer), my phone stopped getting into Download mode, It is a gray screen forever. Now my phone is stopped ( Loop Infinite )
I can not do unroot: Installation Aborted.
When I try to change my android version (install zip from sd card), appear this: Installation Aborted
I did found the build.prop backup, and I can not go back to stock rom by odin, because as I said, the screen turns gray when I try to enter download mode.
Help me, will have to go back stock rom, downloading a backup. (My friend did it, but I did not think and do not know how to do)
Thanks, beautiful site admin
Click to expand...
Click to collapse
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace that should hopefully work on your phone too. Go through the entire thread and you will get to know all the possible solutions. Make sure to use your phone's own key combination to enter the download mode. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post your result. Hope I helped

Thx bro
mahithm said:
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace that should hopefully work on your phone too. Go through the entire thread and you will get to know all the possible solutions. Make sure to use your phone's own key combination to enter the download mode. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post your result. Hope I helped
Click to expand...
Click to collapse
:victory: i said '' i can't enter in download mode'' ..... this link above needs the odin ( odin needs download mode ) but '-'
I said that happen a gray touch after press the download mode buttons, but already entered on download mode, altrought doesn't appear any image, already is the download mode. So i did this...
After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip
1- download mode buttons
2- volume up + to continue
3- Click in Start on Odin
When appeared Pass, done '-'... thx for tried help me, thx :victory: :laugh:

fernando15j said:
:victory: i said '' i can't enter in download mode'' ..... this link above needs the odin ( odin needs download mode ) but '-'
I said that happen a gray touch after press the download mode buttons, but already entered on download mode, altrought doesn't appear any image, already is the download mode. So i did this...
After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip
1- download mode buttons
2- volume up + to continue
3- Click in Start on Odin
When appeared Pass, done '-'... thx for tried help me, thx :victory: :laugh:
Click to expand...
Click to collapse
No problem! Glad I could help

mahithm said:
No problem! Glad I could help
Click to expand...
Click to collapse
ok then.. !! let me try this... but please tell me first...
i have Cooper_v1.0.OPS to call in OPS
then i have Latest firmware (downloaded from samsung website) for call in One package.. right?
he wrote "After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip"
so basically whats is Pit, boot, phone, pda, csc .... and where to download them all.. and why? need to know this time before do again amazing thing with my mobile....

info2shail2010 said:
ok then.. !! let me try this... but please tell me first...
i have Cooper_v1.0.OPS to call in OPS
then i have Latest firmware (downloaded from samsung website) for call in One package.. right?
he wrote "After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip"
so basically whats is Pit, boot, phone, pda, csc .... and where to download them all.. and why? need to know this time before do again amazing thing with my mobile....
Click to expand...
Click to collapse
You can continue with the installation using "One Package". According to @fernando15j, when he pressed the key combo, it was in Download Mode even though the downloading image was not displayed. If this doesn't work work either, then your last option will be USB Jig. You can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped

mahithm said:
You can continue with the installation using "One Package". According to @fernando15j, when he pressed the key combo, it was in Download Mode even though the downloading image was not displayed. If this doesn't work work either, then your last option will be USB Jig. You can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped
Click to expand...
Click to collapse
Nope.. all things failed..... i made 3 USB jigs... ( wasted 3 data cables ) ... but failed...
then i purchased a ready-made USB Jig from eBay... and tried but again failed....
now the situation is i cant access download mode... and even cant access Recovery mode...

info2shail2010 said:
Nope.. all things failed..... i made 3 USB jigs... ( wasted 3 data cables ) ... but failed...
then i purchased a ready-made USB Jig from eBay... and tried but again failed....
now the situation is i cant access download mode... and even cant access Recovery mode...
Click to expand...
Click to collapse
I'm so sorry to hear that. I suggested you that option because the user @Baracs was successful in forcing open his Ace's Download Mode using USB Jig. Here is the thread,
USB Jig for Ace
Guess it doesn't work sometimes