Database Develop

Stuck at Galaxy S logo!

Guys... I´m in trouble... I´m on JPM and flashed CF-Root-JPM-v1.2-Busybox-1.17.1 but my phone was taking too long, like more than 20min at Galaxy S boot. I knew something did go wrong, removed the battery and I entered download mode again and re-flashed... Same thing! My phone is not getting past Galaxy S boot up picture!! I can't enter recovery mode but can enter download mode! Is there anything I can do to bring my phone back to life?! PLEASE HELP ME!
I already tried to flash new roms in odin. My device is recognized but odin hangs and does nothing...
I need some advice on this, did I kill a new phone?! I´m scared

Please Help!
- UPDATE: SOLVED!
Hi there, I'm having the same problem on my I9000B. Please help me.
This is my story, I had upgraded my 2.1 firmware to VIVO's 2.2 Froyo via KIES with the Kies Registry Patcher (used ZVV). Everything worked perfectly, but I wanted to root my I9000B so I made the terrible mistake of using CF-Root via Odin, (http://forum.xda-developers.com/showthread.php?t=788108) following the exact instructions. The kernel replacement (zImage file) was for the I9000 so I had the touchscreen problems. When the phone booted showed Samsung galaxy S GT-I9000B and then inmeadeatly the "B" dissapeared.
Because of my n000bness I tried to use the zImage file from this ROM (VIVO's) (http://forum.xda-developers.com/showthread.php?t=858483), by downloading my own .tar created file (with 7-zip) of the zImage file. Here is were things went down. I got the android - USB cable boot icon. I could not go into recovery mode but I could do download mode, so I re-flashed VIVO's ROM (the one published here) with Odin:
I used the 803 .pit file, Odin 1.3
I did not check re-partition
I selected the ROM as the PDA file and I left PHONE and CSC blank.
the ROM was downloaded to the phone and Odin did not gave me problems.
My problem here is that I get the black screen with vibrations from time to time on boot. This is exactly what happens:
The phone starts showing "Samsung galaxy S.... GT I9000B (at least shows "B")
I can get into recovery mode but the following appears:
Code:
update media, please wait
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please us UI menu for format and reboot actions.
copy default media content failed.
Then I did a factory reset, succesfully completed, tried again flashing the ROM but with Re-partition box checked (as instructed here: http://forum.xda-developers.com/showthread.php?t=723596) but the same stuff happens.
Please tell me what to do! I know it was a stupid mistake trying to fix ony the zImage file, and stupider was using CF-Root on my non-compatible device.
PS: I can get into download mode with no problems
Code:
pda i9000bvjjpa
phone i9000bvjjpa
csc i9000bzwjp3

I have exactly the same problem
but i can go into recovery mode and download mode.
the galaxy screen is I9000 and my sgs is I9000B
any ideas?

A friend of mine has the same issue on his SGS. Both recovery and download mode working.

Have you done JUST like this:
Figueiredo81 said:
Guys... I´m in trouble... I´m on JPM and flashed CF-Root-JPM-v1.2-Busybox-1.17.1 but my phone was taking too long, like more than 20min at Galaxy S boot. I knew something did go wrong, removed the battery and I entered download mode again and re-flashed... Same thing! My phone is not getting past Galaxy S boot up picture!! I can't enter recovery mode but can enter download mode! Is there anything I can do to bring my phone back to life?! PLEASE HELP ME!
I already tried to flash new roms in odin. My device is recognized but odin hangs and does nothing...
I need some advice on this, did I kill a new phone?! I´m scared
Click to expand...
Click to collapse
1. Enter your phone in dl-mode, but don't connect yet.
2. Open Odin, tag re-partition, auto reboot and f.reset time, make sure efs clear and bootloader -fields are NOT checked. select CORRECT PIT-file (2.1 ROMS usually 512, 2.2 ROMs many times 803, samfirmware always tells which one to use next to the dl-link of a ROM-file), enter your phone in dl-mode, plug, wait it to be recognized by Odin.
3. Click start, wait until Odin shows PASSED, unplug your phone, remove the battery for 30 seconds, enter dl-mode again, don't plug just yet.
4. In Odin, click Reset. Then select PDA, Modem and CSC files compatible with the PIT-file used in re-partition, plug your phone, make sure re-partition NOT checked and no PIT-file selected (once again, make sure you use correct PDA for the PIT you flashed). auto-reboot and f.res.time should be selected. Make sure efs clear and bootloader -fields are NOT checked.
4- Plug your phone and when recognized, click start. Wait to be passed. Now your phone will boot (or if not, boot manually) and should work just fine.
Edit: Try to put Eclair ROM, for example JM2, not jpa, and see if it works better.

Thanks!!
Sir, you have saved my phone and my whole week. This is what I did:
With this method I tried the Vivo Brazil's 2.2 Rom again and did not work, same error, tried using both 803 and 512 pit files.
Then I downloaded an 2.1 firmware (JG9, which was the same that came with the new phone) from Claro Brazil that I found on google and flashed it with the 512 pit and worked perfectly. I had been strugling with this problem the las 6 hours and solving this was urgent because I'm going to vacation now.
Now I can re-update via Kies and return to Froyo were everything worked.
I will not try to do things like this in such a risky way (risky because I don't know)
Thank you very much.
Margaliini said:
1. Enter your phone in dl-mode, but don't connect yet.
2. Open Odin, tag re-partition, auto reboot and f.reset time, make sure efs clear and bootloader -fields are NOT checked. select CORRECT PIT-file (2.1 ROMS usually 512, 2.2 ROMs many times 803, samfirmware always tells which one to use next to the dl-link of a ROM-file), enter your phone in dl-mode, plug, wait it to be recognized by Odin.
3. Click start, wait until Odin shows PASSED, unplug your phone, remove the battery for 30 seconds, enter dl-mode again, don't plug just yet.
4. In Odin, click Reset. Then select PDA, Modem and CSC files compatible with the PIT-file used in re-partition, plug your phone, make sure re-partition NOT checked and no PIT-file selected (once again, make sure you use correct PDA for the PIT you flashed). auto-reboot and f.res.time should be selected. Make sure efs clear and bootloader -fields are NOT checked.
4- Plug your phone and when recognized, click start. Wait to be passed. Now your phone will boot (or if not, boot manually) and should work just fine.
Edit: Try to put Eclair ROM, for example JM2, not jpa, and see if it works better.
Click to expand...
Click to collapse

Well, the good news is that it appears that the "E:Can't mount /dev/block/stl10" error msg can be resolved.
http://forum.xda-developers.com/showthread.php?t=788850
This thread discussed this specific error message. For some reason, they're claiming that flashing JPC with 512 pit and repartition checked is doing the trick. I'm assuming this will result in data loss but I guess that's better than losing the phone entirely You should be able to flash to whatever firmware you want afterwards (assuming it works).
JPC:
http://www.multiupload.com/WB3104V8G0
Pass = samfirmware.com
512 PIT
http://www.multiupload.com/I5WICSBFJ1
Report back if this works for you.

Please, post the link or give me directions for the Claro's ROM. I am having the same problem here.
Thanks.

gtg2 said:
Well, the good news is that it appears that the "E:Can't mount /dev/block/stl10" error msg can be resolved.
http://forum.xda-developers.com/showthread.php?t=788850
This thread discussed this specific error message. For some reason, they're claiming that flashing JPC with 512 pit and repartition checked is doing the trick. I'm assuming this will result in data loss but I guess that's better than losing the phone entirely You should be able to flash to whatever firmware you want afterwards (assuming it works).
JPC:
http://www.multiupload.com/WB3104V8G0
Pass = samfirmware.com
512 PIT
http://www.multiupload.com/I5WICSBFJ1
Report back if this works for you.
Click to expand...
Click to collapse
worked here
thanks

thanks for the help i love you no homo !

Un Loko said:
Sir, you have saved my phone and my whole week. This is what I did:
With this method I tried the Vivo Brazil's 2.2 Rom again and did not work, same error, tried using both 803 and 512 pit files.
Then I downloaded an 2.1 firmware (JG9, which was the same that came with the new phone) from Claro Brazil that I found on google and flashed it with the 512 pit and worked perfectly. I had been strugling with this problem the las 6 hours and solving this was urgent because I'm going to vacation now.
Now I can re-update via Kies and return to Froyo were everything worked.
I will not try to do things like this in such a risky way (risky because I don't know)
Thank you very much.
Click to expand...
Click to collapse
JM2 with pit method is perfect. my "E: can't mount /dev/block/mmcblk0p1" problem has finally been solved.
Thanks

This worked for me.
http://samsunggalaxysforums.com/sho...CIAL-STOCK-FROYO-2.2.1-IS-OUT!!!!-(i9000XXJPU)

???I bought my Phone from CSpire but stuck on At&t Logo???
Samsung Galaxy s Showcase stuck on the At&t Logo...Will not let me go into Download mode??? Help please?

Galaxy Note fails while booting (yellow triangle)

Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s

Can you exactly give the file name, which you have used to flash PDA section? and size of it

Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888

Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...

Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.

Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated

Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium

dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium

My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?

Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.

Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...

Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium

The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?

Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?

Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.

When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers

I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.

[Q] Samsung Tab P1000 not powering on

hi i have a Samsung Tab P1000 and now its not powering on after i forced to switch off from downloading mode,because I'm trying to update from Froyo 2.2 to gingerbread 2.3.3 but after following the instruction from opening the odin, putting the pit file and PDA file and i click the start its only showing the setupconnection.......please help me.....thank you

did you try to charge it? If not do that and flash again.

yes....i tried to put in charge and it showing like this in the photo but if i remove from tha charger i cannot powering on and the icon will disappear.....

i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off

Samsung gtp 1000
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
hi guy i ve the same problem, pls i just need to know if is an hard brick or just a soft.
I ve read many trhead on forum and i ve seen that if is hard brick i must use resurrection program but i cant find no link.
pls some one can post me? tnx

cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
That diagram you had is the same thing as the download mode. So treat it as such and flash your rom and kernel normally and it should work. I had the same problem before. To be sure, tried the following thread. Go to the 3rd post in this thread and follow the installation instruction. It will work. http://forum.xda-developers.com/showthread.php?t=1382055

I get that every now and then too. I reinstall the drivers (included with Kies), and reboot the computer. After that it will work.

Froyo to Gingerbread -- Please be extra careful when flashing
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
Does ODIN still recognize your Tab? If you are upgrading from froyo to gingerbread, you may need to load new PIT file as well as new dbdata.rfs.
If ODIN still recognize your Tab, try to download your choice of firmware again with PIT file included. I'll attach a working PIT for you.
Note: Please extract the attached file to get the .PIT file and put it on PIT field on ODIN along with your choice of firmware you are flashing.
Once you are done and reboot, mostlikely you'll be in a boot-loop stuck at SAMSUNG screen. Now reboot to download mode again, then flash the DBDATA.rfs.tar I attached on the following post in PDA field on ODIN:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121

i dont have the icon

wakak make sure you got the proper Samsung driver installed!

[Q] Messed it up and need help

This WAS the situation before the problems:
Rooted Gingerbread rom, all working fine. Decided to unroot and install the full version of the official German ICS rom by using PC Odin. All went fine and used my Note for over two days. Because of the lags en slow responses I decided to reflash the ICS rom. From that moment on I messed it up. I've been reading and searching hundreds of posts for almost a day but didn't find a solution.
This IS the current situation:
I can get into download mode
I can get in recovery mode
However, in recovery mode I can not install a rom, every flash (CWM, both ICS and GB - even using chainfire's rom needed for rooting) stops on a random moment...but never gets it to the end, even if I wait several hours. Installing is very...very....very slow.
In recovery mode i can not restore a Nandroid backup, both ICS and GB. Every backup stops when /system has te be installed. errormessage.
In download mode I can connect my Note to PC Odin. I can select a rom and start flashing. However, after appr. 80% installation halts during "nand write start", no error message. The flashing does not finish, even after hours.
Funny is, i can install a kernel like Abyss.
So, I can't restore, i can't flash using cwm in recovery and I can't flash using PC Odin. My device seems not fully bricked. The max I get when rebooting (knowing that the process has not finished) is the triangle screen.
Any advise is appreciated.

Do not flash thru CWM... Flash a good GB kernel like "franco.Kernel" but thru PC Odin then u can flash whatever u want from franco's CWM... Good luck

Don't need help anymore
Note is officially bricked. After several attempts to recover from a softbrick the screen of my Note didn't turn on anymore. No button or button combination works, no recovery and no download mode, just a black screen.

Ce said:
Don't need help anymore
Note is officially bricked. After several attempts to recover from a softbrick the screen of my Note didn't turn on anymore. No button or button combination works, no recovery and no download mode, just a black screen.
Click to expand...
Click to collapse
Flat battery? It's also possible that it's just the screen that's not working. Try entering download mode "blind". So hold power+home+vol down for ~10 seconds, then press vol up. Hook it up via usb and see if Odin can recognize it.

Thanks, didn't think of that. But unfortunately no response from the device.

So now that it looks like your phone is officially bricked, I think you should just take it to Samsung and make up a story. Like you were updating your software with Kies and something happened and the phone is just not booting up.
I am sorry you bricked your note though..

try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose

musashiro said:
try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose
Click to expand...
Click to collapse
I would like to but it's very hard when you can't see anything on the screen...

Maybe it's just the battery, try to charge it externally and try a JIG also
Sent from my GT-N7000 using XDA

Just a quick, final, update.
My Note was superbricked. Had to send it to a Samsung Service Center. No additional questions were asked. Samsung replaced the mainboard. Didn't have to pay anything.
Great service!!!

try this out buddy, do it on your own risk!!! anyways you have messed it up.
Ce said:
This WAS the situation before the problems:
Rooted Gingerbread rom, all working fine. Decided to unroot and install the full version of the official German ICS rom by using PC Odin. All went fine and used my Note for over two days. Because of the lags en slow responses I decided to reflash the ICS rom. From that moment on I messed it up. I've been reading and searching hundreds of posts for almost a day but didn't find a solution.
This IS the current situation:
I can get into download mode
I can get in recovery mode
However, in recovery mode I can not install a rom, every flash (CWM, both ICS and GB - even using chainfire's rom needed for rooting) stops on a random moment...but never gets it to the end, even if I wait several hours. Installing is very...very....very slow.
In recovery mode i can not restore a Nandroid backup, both ICS and GB. Every backup stops when /system has te be installed. errormessage.
In download mode I can connect my Note to PC Odin. I can select a rom and start flashing. However, after appr. 80% installation halts during "nand write start", no error message. The flashing does not finish, even after hours.
Funny is, i can install a kernel like Abyss.
So, I can't restore, i can't flash using cwm in recovery and I can't flash using PC Odin. My device seems not fully bricked. The max I get when rebooting (knowing that the process has not finished) is the triangle screen.
Any advise is appreciated.
Click to expand...
Click to collapse
i was not a member when i commited this mistake. but then big thanks to this community it helped me back from softbrick.
first you do is install a stock kernel of ics on your note go into recovery and just clear cache partition, thats it no wipe/data factory reset.
then,
install the pit file from this thread, also read it completely before proceeding. http://forum.xda-developers.com/show....php?t=1667886 , hoping yours is 16gb version and also read this thread for additional info but its quite complicated for me so im just telling you the direct method and hopefully itll get your note back to work. so once you download the 16gb pit file unzip it and in the unzip folder you will find a separately lying pit of 16gb stating patched-standard thats the one you want.
then,
goto samfirmware and download the latest ics firmware(i downloaded the indian one as it is in file .tar),
unzip it till you get .tar file.
open odin- click pit-select 16gb patched standard pit- check wether repartion is ticked- click pda-select the .tar file you extracted connect your phone and start. this time i wont stop at factory.fs.....
NOTE THAT AFTER THIS PROCEDURE IS COMPLETED SUCCESSFULLY YOUR INTERNAL STORAGE WOULD BE ONLY 8GB INSTEAD OF 11 GB STOCK WHICH YOU WERE GETTING.
I REVIVED MY NOTE THROUGH THIS PROCEDURE. PROCEES AT YOUR OWN RISK.
one your phone is working you'll be able to reset the counter with a jig and get your phone under warranty and get your motherboard changed by teliing at the Samsung Service that you are getting only 8gb instead of 11gb you used to get earlier(warranty only if you had any).
hope this helps mate.
BEST OF LUCK!!
A BIG HUGE THANKS TO hg42.....

N7000 special case of superbrick, please help!

OK guys, let me explain my problem in shortest possible form;
Few days ago I bought N7000 with a "software issue"- as seller described his item, and I supposed that it would be easy to fix this kind of problem, because I never had any problem repairing soft bricked phones, but this one driving me crazy. I read all about N7000 brick states, and closest what I found related to my phone is "superbrick", because I can't enter recovery mode, the only mode it enters is Download Mode.
Let me give you some more info about the phone's status before any ODIN flash I tried:
-Seller told me that phone didn't finnish update (thats all he said, and that was OTA update);
-when I received phone, when I tured it on, it was stuck at "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." (then I said to myself "this is goidg to be easy....")
-I could enter download mode, and when it is in downlad mode it says that no custom binary is installed (custom binary counter:0, so I suppose there wasn't custom ROMs or kernels installed)
Then I tried to flash stock ROM, but failed. Odin always stuck when it have to write (write operation failed), and that is happening on every rom I've tried (it fails writing "data.img", it fails writing zImage, also stuck at "NAND write start"). I have tried almost any Odin version available, changing USB ports, USB cable (I have original SAMSUNG cable also), but nothing worked.
Then I read here on some threads that is possible to solve this problem with flashing custom .pit file, and I decided to give a try, and it stuck at "Do not turn off target!", and later it says "FAILED" in red rectangle, and then Odin disconnects my phone by itself (I never disconnect phone during flash, unless Odin is stuck for a unusally long time(which is the case with my phone)).
The ONLY thing I have managed to flash to my phone is "Q1_CHN_bridge_bootloader.tar", chinese version of bootloader (whit full success, Odin passed "start NAND write"), so I tought it will chinese firmware version (i9220)., but I was wrong, it get stuck at usual. (when bootloader was flashed, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." message disappeared, and it showed yellow triangle with SAMSUNG NOTE N7000 logo instead).
Before I tried .pit flashing, I tried to flash custom kernel with custom recovery (GB, ICS and JB kernel version), but that also didn't work (custom binary changing when trying to flash kernel).
So, to conclude:
-Note N7000 enters download mode
-I can't flash anything (.pit, kernel with (custom) recovery, N7000 bootloader) except "Q1_CHN_bridge_bootloader.tar", chinese (i9220) version bootloader (That leads me to conclusion that Odin still can write something to phone)
I would like to ask you guys if you have any suggestion or advice what should I try to revive my phone. Any help is more than welcome!
Thanks for reading such a long post! Cheers