Database Develop

Cingular Internet via Underground WM6 rom

Can anyone get their cingular internet (edge) to work?

yea.. i did. you just have to extract the files from the Cingular EXT Rom. It includes a CAB to enable Edge and the Edge icon.
*In the attached EXT ROM, Signed_Edge_Icon is the Icon itself, and EONs is the cab that actually enables Edge. Install EONs first then the icon.
~Stefanelli~

Thank You !!!!!

Okay, I installed both like you said and it still does the same thing. When I click on IE, it says it can not connect with current connection settings. To change your settings, tap settings.
Is there a setting I still need to change? How do I access the edge icon you were talking about that.

Have you tried running this cab file?
peter2oo2 said:
Can anyone get their cingular internet (edge) to work?
Click to expand...
Click to collapse

am I supposed to do something after I install the cab file or is it supposed to work automatically?

You have to make sure that you have the correct settings in!
Go to Connections, then to advanced. Tap 'Select Networks'. Create a new connection profile, name it MEdia Net.
Then tap Modem and tap...
Create New
(name it Cingular)
Enter a name for the connection. From the "Select a modem" drop-down, select Cellular Line (GPRS).
Tap Next.
In the "Access point name" field enter wap.cingular.
Tap Next.
Verify the following profile settings, then tap Advanced:
Username: [email protected]
Password: CINGULAR1
Domain: Blank
Verify the following settings and tap Ok.
Use server assigned IP address: Selected
Use specific IP address: Unselected
Use software compression: Unchecked
Use IP header compression: Checked
Tap Finish.
Tap Ok.
Give that a try.

Just so you know... Those settings are for Cingular users... not AT&T... so if you are AT&T tell me and I'll give you settings for that... but what you have said tells me you are Cingular. Hope I've helped.

I am cingular.
okay, when i attempt to connect to the internet, it says the answering modem has disconnected. to check your connection settings, go to settings...bla bla bla.
Is the password "CINGULAR1" was the 1 and caps typo?

no it should be caps and there should be a 1 at the end.. the settings i gave you are directly off the cingular support site.. so they should work..
-Stefanelli-

Oh good GOD, I was the one with the typo. I was typing WPA (like the encryption) instead of WAP. Thanks for the help. I'd buy you a beer if I could

If you simply run the cab that golfernutnflorida posted all those GPRS settings are there.
I'm on Cingular and I'll be damned if I had to put those settings in by hand the numerous times, sometimes daily, that I flash a new experimental ROM!
In other words, I keep that exact cab on my SC.

Exactly! The less I have to put in under a Rom Flashing, the better.
Dr Puttingham said:
If you simply run the cab that golfernutnflorida posted all those GPRS settings are there.
I'm on Cingular and I'll be damned if I had to put those settings in by hand the numerous times, sometimes daily, that I flash a new experimental ROM!
In other words, I keep that exact cab on my SC.
Click to expand...
Click to collapse

Tmobile HotSpot Cab

So i'm looking for the hotspots log in application. Ever since i flashed to the pdaviet touchflo rom on my wing I have been missing this. Is there any place to just get the cab file? Or any other way to be able to log back onto hotspots?
thanks

You can login without the application.
1. Add a new wifi access point - Network name = tmobile - next page tick "The key is automatically provided" - Next - Finish. There are no other settings needing editted here.
2. Goto a hotspot location and turn on your wifi and highlight "tmobile" - connect.
3. Open your browser (IE) and wait until the intial page loads. Here you will get your login ability. Login (username is usually your 10 digit phone # and password if not changed is the last 4 digits of the account holders SSN) - Browse as you please
Note: You can do this with any wifi enabled device not only the phone example your laptop or PSP.

I think he is talking about using the Tmobile hotspot to make calls over the voip. Like "Hotspot at home" for tmobile.

I thought I was told the Wing is not applicable to [email protected] program. Hmm interesting might need to read into that a little more.

neiltoe said:
You can login without the application.
1. Add a new wifi access point - Network name = tmobile - next page tick "The key is automatically provided" - Next - Finish. There are no other settings needing editted here.
2. Goto a hotspot location and turn on your wifi and highlight "tmobile" - connect.
3. Open your browser (IE) and wait until the intial page loads. Here you will get your login ability. Login (username is usually your 10 digit phone # and password if not changed is the last 4 digits of the account holders SSN) - Browse as you please
Note: You can do this with any wifi enabled device not only the phone example your laptop or PSP.
Click to expand...
Click to collapse
This is exactly what i was looking for. I appreciate it!
regards

Your welcome glad I could help. I spent the time on the phone with blackberry/PDA support on T-Mobile customer care to get that info. The 1st tier of support was stubbornly stating I had to use any tmobile device that accepts a sim card and use the prebuilt software. That was the only way according to the 1st tier got to Blackberry/PDA support and asked them how would it be done on a PSP and eventually they told me its all available in the Homepage and just to use my info. They were not forthcoming with what my info was and I eventually got them to tell me it was my 10 digit # and the last 4 of the primaries SSN. Now after you set all that up you can goto the Hotspot page and user your control panel there to do what you can with Hotspots. But it is definitely nice to know that the data package I got with T-Mobile Internet is exactly what they say it is and I do not have to get another $20 package to use Hotspots like the 1st representative was telling me I had to do.

Definately..
I'm not totally about the customer service reps either. Dont get me wrong, there are plenty out there that know what they are talking about, but there are plenty out there that dont! When I first got my Wing I was in a hurry. I bought it and left the store quickly. I called tmobile a bit later to add the total internet package to my plan and after about 20 minutes the rep told me that i could not get it on my plan!! I was like WHAT!! I just spent almost 400
bucks and you're telling me I cant get internet service on this smartphone?!? The reps exact words were "That is correct sir. However if you go and upgrade to a blackberry you can add the blackberry internet package." Then of course I politly told the rep she didnt have a f**king clue! So I went to a store and they added it on no problem.

I upgraded all via the internet. Never get a deal with them anyway as a matter of fact all my grandfathered packages always seem to disappear and they want to charge me more everytime I talk to them. Have had so many problems with the motorola devices from them. The wife got a nokia 8801 and we have had it replaced 4 times the battery and speaker system on that device is just horrible from them. The whole battery connector fell out right off the circuit board no abuse from the wife she takes decent care of her devices. But on subject I had the Internet Package for the nokia ngage and something happened and they offered a special package/price for it at the time. Well the program ceased and I was offered the Intenet Data package at $9.99. I was on that for a long time and then all the sudden it all stopped. I ended up with plain old t-zones. I had t-zones on all our phones 3 total and after they told me they can't help me I just cancelled the other 2 phone t-zones and went with internet on my phone and they can goto a Starbucks with a laptop if they need internet. I'm sure they love the coffee I havent had any myself not a coffee fan lol. But in the end I just got upgraded and had to figure it all out myself and argued with them to get it done right. I won't complain about the service I get what I pay for I don't expect much more than that. I have learned that major companies just don't appreciate the customer on a one on one basis.

neiltoe said:
You can login without the application.
1. Add a new wifi access point - Network name = tmobile - next page tick "The key is automatically provided" - Next - Finish. There are no other settings needing editted here.
2. Goto a hotspot location and turn on your wifi and highlight "tmobile" - connect.
3. Open your browser (IE) and wait until the intial page loads. Here you will get your login ability. Login (username is usually your 10 digit phone # and password if not changed is the last 4 digits of the account holders SSN) - Browse as you please
Note: You can do this with any wifi enabled device not only the phone example your laptop or PSP.
Click to expand...
Click to collapse
But then you have to open the web browser and enter the password everytime you want to connect. I'm looking for the CAB too so that I can save my password and the log-in can be automatic. Nobody's got it, huh??

adamz said:
But then you have to open the web browser and enter the password everytime you want to connect. I'm looking for the CAB too so that I can save my password and the log-in can be automatic. Nobody's got it, huh??
Click to expand...
Click to collapse
Well, i just updated my rom to the touch-it 2.3 and it has the default tzones and it has hotspots login. I would recommend the rom, its been great so far

I will try to see if I can get a copy of this cab for you

buggzero said:
I will try to see if I can get a copy of this cab for you
Click to expand...
Click to collapse
Excellent! Thanks! I want to use it on a Kaiser though, so that custom ROM you mentioned won't work.
Although I'm sure there must be a way to extract it from the NBF, huh?

did anyone ever find a cab or make one?
if so please post
thanks =]

I made these cabs a while back... I'm surprise no one found them by searching the site
http://forum.xda-developers.com/showpost.php?p=2010453&postcount=2
Here are the direct links to download as long as you're logged into the site:
duprade T-mobile Hotspot Utility.CAB
duprade T-mobile T-Zones.cab

thanks for the cabs!

No problems.

Excellent! Thanks!
I think the search does not index attachment filenames and that post was about tZones. They'll find it now I'm sure.
Thanks again! It works great!

What exactly does the Tzones cab do? does it set up the Tzones proxy for you?

Save my day !
Thanks for the files, you saved my day !

[Q&A] Switching Sprint HTC to PagePlus

Mods please delete.

Following your every move!!!
Trying to move 2 Heroes to PPC this weekend.
I am using KittyWireless.com to make the transition from Sprint to PPC.
I'll make sure I post my results as I go along.
Thanks for all of your work!
~Syn

No problem, one things I would like to ad, I found a guide, that is for the Sprint EVo to pagePlus which EVERY step is the same, the guide isn't mine, but I'm going to upload it to my personal server
guide: http://www.bpcr.biz/buddy/Android.zip
the zip contains, 2 PRL's, the guide, the APN needed for MMS and APN backup and Restore.
Now, load the first PRL, pageplus.prl when first provisioning, after you are done doing all changes, (including APN Backup & restore) and reboot phone and verify that data works, load the second prl, pageplus1.prl , reason being, that first prl is a non-evdo prl so that it forces phone to go 1x only, which resets HA and autentication keys.
The second PRL is an EVDO prl, only issue I've noticed is sometimes EVDO is spotty.. however we are limited with Data an PagePlus, so WiFi is best, but at least now you can get on web if needed and recieve picture messages.

TpyoKnig said:
No problem, one things I would like to ad, I found a guide, that is for the Sprint EVo to pagePlus which EVERY step is the same, the guide isn't mine, but I'm going to upload it to my personal server
guide: http://www.fortuneinyou.com/buddy/Android.zip
the zip contains, 2 PRL's, the guide, the APN needed for MMS and APN backup and Restore.
Click to expand...
Click to collapse
Do you still have the files posted above? Thanks. I am switching an EVO to PP.

Hey TpyoKing,
you wouldnt happen to still have that android.zip file for flashing a phone to Pageplus would you??
TIA,
Julian

TpyoKnig said:
Disclaimer: I'm not responsible for what you do to your phone while preforming these steps, the info here is not made by me but is a mix of previous experience and a few other guides on the internet.
as of today (9/28/2010) DATA and SMS (Picture messages) DO NOT Work, I'm still trying to figure that part out.. However Calls and Text and all the other functions of the phone do work!
1st) thing you have to have is root for your phone, if you have that then great! Also you need to be running a NON-Froyo Rom (the froyo roms, I've tested thus far) are lacking EPST which will be used later to program the phone.
2nd) Search the Market (Via WiFi) and download MSL reader
3) Write down that MSL (will need it later)
4) reboot phone
5) download http://www.bpcr.biz/buddy/Android.zip and put on root of SD card
6) on your phone pull up the dialer (hit the green button) and put in ##775# (##PRL#) and put in your MSL code you got earlier
7) select "update PRL", drop down "Folder" to "SD Card" and push down on your navigation ball and then long press the "menu" key to make your keyboard lower and select pageplus.prl then select "ok", then press your "menu" key and hit commit modification
8) phone will reboot (Congratulations your now on verizon towers!
9) Get PagePlus to activate phone (eg, contact a local dealer) , tell them you are manually programming a Sprint phone and give them the IMEI and that you need your MIN/MDN and SID.
**Update**
Easier method!
10) on your phone, pull up the dialer and dial ##YOUR6DIGITALMSL# , then select edit mode
11) change Mobile Directory Number (MDN) to what is given to you by PP/dealer
12) change MSID to your MIN (Mobile Identification Number) as suplied by PP/Dealer
12) press menu
13) commit changes
**** older method***
10) Now that you have that information, dial ##3424# on your phone
11) Click "edit mode"
12) Enter the MSL from earlier
13) Select Data Profile, then change the username to [email protected]
14) press your physical menu button and select commit changes
15) re-do steps 10 and 11 but this time, select Advanced instead of data profile
16) now select MSID and change it to your MDN
17) now select Home SID/NID, input SID supplied by PagePlus Dealer and NID is ALWAYS 65335
18) press your menu button again and commit changes
19) ENJOY your pre-paid HTC Hero!
************* UPDATE*******************
I now have working data with PagePlus, now to solve MMS problem!
Will update shortly with tutorial on howto get data & MMS
Click to expand...
Click to collapse
Thanx for this man!

Here is a link to the latest Verizon 52031 PRL file I managed to find for Sprint phones working on Pageplus with annoying Roaming Indicator turned off.
http://goo.gl/7L1XF
If you anyone else manage to find any later version than this PRL please share it with us like I did

what does step 6 mean??

does this work for the evo shift as well?

does this work for the evo shift as well

yes it works for the shift as well.

well, after days of messing with it, when I couldn't get anyone to help me, I finally got true 3g on my sprint evo 3d to pageplus without a donor phone. (I know this thread is about the 4g, but maybe there are other poor btards like me looking for help)
Problem is, I'm not sure what did it, so take this with a pinch of salt. I THINK what did it was putting a 1x only prl in, then letting it get connection, then putting the 3G prl in, letting it work stuff out, then putting the 00002.prl (Pageplus) in. Don't ask exactly what the problem was or how to fix it, I don't know. Just trial and error along with a few crisp apple ciders.....
Here's what I did....(prl's attached)
MDN and 00002.prl
OTA
the usual [email protected] stuff
I used qpst and dfs
clear nam/baner name
load 51600_1x prl, rebooting,
setting to CDMA only mode (epst),
rebooting, loading 51618 prl, reboot.
Ended up with mode CDMA_HDR in DFs. Then set to Automatic, loaded 00002.prl.
Not sure what else it took, but that did something. Also set DMU MN auteth to 11.11.11 from 0.0.0 (not sure that did anything though)
This got a PPP password and that's all it seemed to need. AAA HA passwords are still blank, but it is EVDO, not 1x, and tests at the same speeds as my other phone on 3g.

Nice.

[Q] How can I flash my hero running cm7 to metro pcs with working mms?

All in the title, is it possible?

I would imagine you need to access your EPST settings (dial ##778#) and alter them so they match your service providers' settings (you will need your 6-digit MSL code to change the EPST settings).
If ##778# doesn't work on your ROM, you may need to flash to another ROM (like Bittersweet Sense ROM), then configure your EPST settings, and then flash back to CM7.
Alternatively, you may be able to change the EPST settings with the program QPST Configuration/Service Programming and/or CDMA workshop 2.7.0.
Search around the Hero CDMA forum for anything to do with Metro PCS flashing and start reading.

From my experience this has to do with the APN of the phone.

BuTTcHiPs said:
I would imagine you need to access your EPST settings (dial ##778#) and alter them so they match your service providers' settings (you will need your 6-digit MSL code to change the EPST settings).
If ##778# doesn't work on your ROM, you may need to flash to another ROM (like Bittersweet Sense ROM), then configure your EPST settings, and then flash back to CM7.
Alternatively, you may be able to change the EPST settings with the program QPST Configuration/Service Programming and/or CDMA workshop 2.7.0.
Search around the Hero CDMA forum for anything to do with Metro PCS flashing and start reading.
Click to expand...
Click to collapse
A lot of this is true and I'm also going through it right now in Ohio with Revol Wireless. Just found out last week actually that MetroPCs is buying out Revol Wireless as well.Anyways...I was told by a certain individual here at a Boost mobile store that also flashes for Revol and Metro PCs that when you flash the phone to another network such as Revol or Metro PCS that they only actually do a half-flash on the phone. The calling and messaging work but you must have Wi-Fi to connect to the internet. SMS works but you cannot receive picture messages or MMS. This individual also told me that he had the capability to do a FULL-FLASH of the phone onto Revol for me so that I would even have my mobile internet as well as the picture messaging and MMS capability. He also told me that if you transfer to BOOST Mobile,they have unlimited talk,text,and web for $45 a month and it is a FULL FLASH. I may just go to Boost pretty soon and tell Revol Wireless to suck it! Hope my info helped you out or gave you some food for thought!
P.S. There is some cellphone software out there called Houdinisoft that is used to flash phones. Check their phone list first to make sure you can flash whatever phone using their software,the CDMA HTC Hero200 IS on the list for Houdinisoft. Ask around about it at cell phone stores,they may not say much about it because they dont want the consumer to know how to flash phones. Just some more food for thought.

Windows Phone 8.1: deleting default APN

Hi,
I have a Nokia Lumia 520 Vodafone (I'm not sure if this is the rigth section or this one http://forum.xda-developers.com/windows-phone-8/development).
I'm using a MVNO operator. It's everything quite good (connection) but I can't use it in order to have the hotspot.
I try to explain: as default, there are 3 different APN (not related to the MVNO operator but related to the operator who "give" the network to the MVNO) and I added the one correct for the MVNO operator. I use the last one, and the smartphone can connect and so on.
The problem probably is that when I activate the tethering (hot spot) the phone automatically tries to activate another APN (one of the 3 as default) but obviously there isn't any connection (there is a message like "there isn't any connection available").
The solution should be: delete these default APN.. but I can't!
Pushing (holding it) the APN only 2 choice are showed: ACTIVATE and SHOW (neither MODIFY nor DELETE).
Well, the question is: can I in some way delete these APN (or change their values... I don't know, via registry system)??
Please note that the tethering function is officially allowed by the operator and in his opinion the is a phone matter.
Also please note the Vodafone brand is only "a face", I mean this rom doesn't deny any type of connection.
Thanks to help

Known problem; some MOs put a custom configuration for tethering in the registry of their phones. To make tethering work "like normal" you need to remove this custom configuration. It can be done by installing a registry editor via chamber hijacking, but I don't have the details of what changes you need to make handy right now.

GoodDayToDie said:
Known problem; some MOs put a custom configuration for tethering in the registry of their phones. To make tethering work "like normal" you need to remove this custom configuration. It can be done by installing a registry editor via chamber hijacking, but I don't have the details of what changes you need to make handy right now.
Click to expand...
Click to collapse
Thanks.
Do you think I can do it simply installing something like "Root Tool" (http://www.windowsphone.com/en-us/store/app/root-tool/f4acc009-ea1e-4063-9bab-fec50195aa1e) ?

Root Tool should let you make the necessary changes, yes. I'm not sure if it supports binary data types, so if you need to edit those you may have trouble, but otherwise it's fine.
Sorry I don't recall the details for making this work. Searching this forum for "Internet Sharing" may help...

GoodDayToDie said:
Root Tool should let you make the necessary changes, yes. I'm not sure if it supports binary data types, so if you need to edit those you may have trouble, but otherwise it's fine.
Sorry I don't recall the details for making this work. Searching this forum for "Internet Sharing" may help...
Click to expand...
Click to collapse
Ok, I'll check, thanks