thnxs to sk806,(go and thank him first)
First, you need to root your device. Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1.
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time.
After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON.
Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button.
You will again see some yellow writing and your device will be rooted.
After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1.
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here: http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1. THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20, below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB.
Then, copy "P6800_Recovery.tar" to your PC desktop.
Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe.
You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.). You want to click the button that says "PDA" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard". You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
***HIT THE THANKS BUTTON IF YOU FOUND THIS POST HELPFUL~***
Click to expand...
Click to collapse
Thanks for your work...
It would be nice if you could make the tutorial with picture and numerical steps.
Good tut love the afford. Some ppl could really use that.
(Edit) tnx goes to steve and you for posting
Verstuurd van mijn GT-P6800 met Tapatalk
Made it a little easier to read/follow for ya.
haidharbbc said:
thnxs to sk806,(go and thank him first)
OK, here you go:
First, you need to root your device.
Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time. After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON. Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button. You will again see some yellow writing and your device will be rooted. After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here:.http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1
THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20 (in italics), below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB. Then, copy "P6800_Recovery.tar" to your PC desktop. Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe. You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.).
You want to click the button that says "Recovery" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard".
You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
Click to expand...
Click to collapse
thnxs for updating it to easier to read for others
Sent from my GT-P6800 using xda premium
Hi!
The ODIN Mobile which I have use to install the Recover, then can I remove it because think about not use it any more???
thx, much appriciated, will try later
2 questions
a why is it necesarry to use clockword recovery ?
i flashed this stock tweaked rom in stock recovery without any problems
http://forum.xda-developers.com/showthread.php?t=1520888
b. is it possible to remove clockwork recovery in case of ...., go back to the old stock recovery of Samsung ?
Original Post
This is the tutorial as I wrote it...I suggest you edit the OP with this, or the version above. If you hit the "Quote" button below, you can copy the properly formatted text from the reply window (it will start with [QUOTE: blah blah], have "[*]" instead of numbers, and end with [QUOTE/]), and then copy and paste to your OP. Thanks.
Steve
First, you need to root your device. Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1.
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time.
After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON.
Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button.
You will again see some yellow writing and your device will be rooted.
After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1.
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here: http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1. THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20, below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB.
Then, copy "P6800_Recovery.tar" to your PC desktop.
Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe.
You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.). You want to click the button that says "Recovery" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard". You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
yes..you can remove it after u install it..but just save it for later purpose my opinion
Sent from my GT-P6800 using xda premium
yarda,
i can't really answer for your 1st question..maybe steve dan help you..
for the 2nd question, i think by flashing the stock firmware and factory reset will do the trick
Sent from my GT-P6800 using xda premium
flashed clockword with odin mobile, it's easy
just follow the steps
now i'm capable to make a nandroid backup before flashing some other stuff
ok..thnxs for the feedback
Sent from my GT-P6800 using xda premium
Yarda said:
thx, much appriciated, will try later
2 questions
a why is it necesarry to use clockword recovery ?
i flashed this stock tweaked rom in stock recovery without any problems
http://forum.xda-developers.com/showthread.php?t=1520888
b. is it possible to remove clockwork recovery in case of ...., go back to the old stock recovery of Samsung ?
Click to expand...
Click to collapse
first question:
Why you can flash this ROM with your stock recovery, i look inside the script steve made and found that
-script mounting and unmounting /data and /system partition
-deleting file system from /data and /system partition
-moving file from zip to /system and /data partition
-making busybox symlinks
-installing kernel
-set some permission
All above process is support with edify script from stock recovery...( until now, i dont know if samsung lock it someday) thats why you can install steve ROM...
suwandiapr said:
first question:
Why you can flash this ROM with your stock recovery, i look inside the script steve made and found that
-script mounting and unmounting /data and /system partition
-deleting file system from /data and /system partition
-moving file from zip to /system and /data partition
-making busybox symlinks
-installing kernel
-set some permission
All above process is support with edify script from stock recovery...( until now, i dont know if samsung lock it someday) thats why you can install steve ROM...
Click to expand...
Click to collapse
This is correct. The tutorial was for all custom ROMs to come, not just my tweaked stock one. The fact that you can flash my ROM is because it is nothing too exotic (it's stock...) and the bootloader and recovery on the tab is not locked down. These things may change, and it is better to have the CWM recovery for that reason AND, especially, as noted in the post above, you can make NANDROID backups which you really should do before you flash a custom ROM...
Steve
thx for the explanation !
i now use CWM recovery, flashed with Odin mobile
great tut, but my CHINA P6800 will not accept any other ROM install for some reason. Yes, I have a brain and others confirm it's somehow locked. No f-ing idea how; more research after (endless) travel.
sk806 said:
This is correct. The tutorial was for all custom ROMs to come, not just my tweaked stock one. The fact that you can flash my ROM is because it is nothing too exotic (it's stock...) and the bootloader and recovery on the tab is not locked down. These things may change, and it is better to have the CWM recovery for that reason AND, especially, as noted in the post above, you can make NANDROID backups which you really should do before you flash a custom ROM...
Steve
Click to expand...
Click to collapse
This should be included in the tutorial imo.
so in a nutshell, we're bootloader unlocked, I can get my brand new HK galaxy tab 7.7 and root/CWM right away (like my OG tab) without having to do any Bootloader unlock method?
cheers
yes..mine juz straightly rooted..same like most of the others
Sent from my GT-P6800 using xda premium
Thanks Guy
Hi,
Sorry, I know this has been covered loads before but im still a little confused on the method.
Im running a great custom rom on my SGA called MindCR. I would like to be able to flash an updated custom kernel.
Im attempting to flash Rafael.Baugis. E3 Stable.
Code:
How to install Kernel with E3 Recovery (Stock):
shutdown the phone
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-XXX-boot.img.zip )
wait the end of process and reboot
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( Select_you_rom_file.zip )
wait the end of process
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-modules.zip )
wait the end of process and reboot
Do I download stock-kernel.tar ? and from the stock recovery, apply update from sdcard, choose stock-kernel?
Do I need to wipe cache afterwards?
Sorry this is so easy for most, but to me those instructions are confusing!
many thanks for your help xda
(ps,. i would of posted this in the dev section but i don't have enough posts)
The solution is in your post itself..
From Rafaels Skydrivd download the two files.. And flash exactly as given in his post
GT-S5830i
sam1136 said:
The solution is in your post itself..
From Rafaels Skydrivd download the two files.. And flash exactly as given in his post
GT-S5830i
Click to expand...
Click to collapse
A: .tar files are to be flashed in Odin
- on the phone go to download mode: keep the [+] and [-] pressed while you power on, when the menu pops out, press [+] again
- on the pc launch Odin, connect the phone with the usb cable, it should lite up a COM-x port if drivers are installed (Rafael provides those too)
- in Odin, press the PIT button, select the cooperve_0623.pit file, press the PDA button, select the 2012***E3-PDA-boot.tar file, uncheck Re-Partition. Start!
B: .zip files are to be flashed in recovery mode, no need for PC
- move the zip file to the sd card
- go to recovery mode: keep the [+] and [Home] pressed while u power on for around 8seconds, a recovery menu will pop out soon after. if it reboots you've kept the 3 buttons pressed too much time, try again.
- select browse for zip file. choose 2012***E3-boot.zip. flash it. choose 2012***E3-modules.zip. flash it. Reboot. No need to wipe anything.
Everything should be clear from Rafael's kernel post, link to files is <<< Custom Kernel and Modules >>> and you can navigate outside the default skydrive folder to find stuff like windows driver and etc.
you can navigate there upper so you will find also driver files etc.
bobdynlan said:
A: .tar files are to be flashed in Odin
- on the phone go to download mode: keep the [+] and [-] pressed while you power on, when the menu pops out, press [+] again
- on the pc launch Odin, connect the phone with the usb cable, it should lite up a COM-x port if drivers are installed (Rafael provides those too)
- in Odin, press the PIT button, select the cooperve_0623.pit file, press the PDA button, select the 2012***E3-PDA-boot.tar file, uncheck Re-Partition. Start!
B: .zip files are to be flashed in recovery mode, no need for PC
- move the zip file to the sd card
- go to recovery mode: keep the [+] and [Home] pressed while u power on for around 8seconds, a recovery menu will pop out soon after. if it reboots you've kept the 3 buttons pressed too much time, try again.
- select browse for zip file. choose 2012***E3-boot.zip. flash it. choose 2012***E3-modules.zip. flash it. Reboot. No need to wipe anything.
Everything should be clear from Rafael's kernel post, link to files is <<< Custom Kernel and Modules >>> and you can navigate outside the default skydrive folder to find stuff like windows driver and etc.
you can navigate there upper so you will find also driver files etc.
Click to expand...
Click to collapse
thanx ....
Ahahahhhhahahahah lol
Quicky
Sent from my GT-S5830i using xda app-developers app
I see there is a lot of people who post in here who dont know how to Flash JVU before Custom Rom with ODIN
Either they get the Red wipe error in Recovery or just arent sure on how to use it, hope this helps you...
THE TOPICS HERE ARE GUIDES ON HOW TO FIX OR USE :
RED WIPE DBDATA ERROR
FLASH JVU 2.3.6 BEFORE CUSTOM ROM
MANUALLY INSTALL CWM
FEAMOD RECOVERY INSTALL
FIX INTERNAL STORAGE ON GT-I9000M
FAILED TO MOUNT SD CARD (E: FAILURE IN RED)
COMPUTER NOT CONNECTING TO PHONE VIA USB
UPDATE TO CYANOGENMOD 10.
AND LINKS TO WHAT YOU NEED ......
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------
Red wipe error is because the problem is with the dbdata!
Install THIS FILE in the PDA section with ODIN and dont touch anything else!
DBDATA.RFS DOWNLOAD : If you need it
Open ODIN
Click the PDA button and choose the dbdata.rfs.tar file you downloaded
Make sure Re-Partition is unchecked
Boot your SGS into DOWNLOAD MODE
To do this : Hold down the Home, Volume Down and the Power button
Connect your device to your computer with the usb cable when in Download Mode
If your device is connected Odin will recognise it
Click Start in Odin and wait
When the process is completed your device will restart
No more dbdata errors!...
------------------------------------------------------------------------------------------------------------------------------------
HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
Samsung USB Drivers : DOWNLOAD MINE or LINK 1 : LINK 2
Needed to recognise Phone to your PC ... duh! :silly:
Reboot Computer once installed for changes to take effect :good:
Please do not attempt anything if you don’t know completely what it is.
If any damage occurs to you or your device, I will not be held liable ... you have been warned !!
If you arent sure ... just ask
FLASHING JVU ROM WITH ODIN v1.85
Why ODIN v1.85? ... I have not had any issues with it, plain and simple!
Use ODIN with PIT File
PIT File Incase you need it : DOWNLOAD
*Using PIT File just Tick Re-Partition and put PIT File in PIT ..simple!
ODIN 1.85
ODIN FILES HERE
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so continue..if not do it again...
VIDEO LINK : HOW TO GET INTO RECOVERY / DOWNLOAD MODE
Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
*PIT File isnt always needed to do this only if you get the 3 Red errors*
Plug in Phone with USB Cable To Computer
In ID:COM it should go yellow and you should see ADDED in the message box
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar
When you have all the files needed in ODIN, say JVU Rom as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone (computer will make a few noises like connect/disconnecting
Unplug the Cable to the Phone
Power Off Phone
Go into Download mode so that we can now root the Phone
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted
CF-Root is in ODIN FILES or DOWNLOAD HERE
Then Click START.. should take just a few seconds ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same again when you see S Logo on Phone unplug Cable
Close ODIN
Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want...
Reboot Phone when complete... DONE!
Please Check APN Settings.. for your area after you have done the following steps to give better signal
Sometimes Authentication Type is set to Default..try it at PAP and then Reboot Phone
As some ROMS APN settings are done manually for the user.. so be careful
Rom I am currently using : Blue SAUROM JWB
Hope this helps out a few people as there are quite a few posts opening up with the same problems or issues :good:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Manually Install CWM (need to have Root in your phone)
Download This FILE and copy it over to /sdcard/
Power off and Boot into Recovery with 3 Button Combo
Select 'apply sdcard:update.zip' and Install (Do not Delete this file from SD Card)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Deleting Cryption Meta Data Error : CWM6012-CM9-Recovery
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU CANT GET INTO RECOVERY (only if CWM doesnt work)...
Start ODIN
Put your Phone into Download mode and connect it via USB
(Volume Down + Home and then Power)
Download FeaModRecovery : HERE
Choose PDA and use the Downloaded File and put it in there > START
Wait for process to complete....
Exit ODIN..
Start Recovery ....
Install .. Reboot....Done
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU STILL RECIEVE THE : E: Failed to mount /sdcard
Try This :
Download This First SDFormatter (Windows)
1. Download "SDFormatter" from the link above
2. Install "SDFormatter"
3. Enable "USB Debugging Mode" from Developer Options in settings.
4. Connect your tablet to PC (USB).
5. Then, tap the "USB Strage Mode" to connect to PC.
6. Backup data on INTERNAL_SD card.
7. Run "SDFormatter".
8. Specify the drive letter of INTERNAL_SD in SDFormatter and click "(Option)" button.
9. "FORMAT TYPE" select "FULL OVERWRITE" and set "FORMAT SIZE ADJUSMENT" to "ON" and click "OK"
10. Now click "FORMAT" and wait for the procedure to complete. (Can take approximately 1 hour 40 minutes)
11. After format is completed you can recopy the backup files back onto the INTERNAL_SD
..or Try and Format SD card in your Computer
If none of the above works try this : Samsung Format Utility
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIX INTERNAL STORAGE ON GT-I9000M (/dev/block/mmcblk0 corrupted) : SEE THIS POST
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COMPUTER NOT CONNECTING TO PHONE VIA USB
Windows
Remove all traces of KIES in Add/Remove.. never use KIES anyway...Reboot PC
Unplug any attached USB Devices to PC
Use Latest Samsung USB Drivers HERE and install.. Reboot System when Done
Go to Device Manager and scroll to the Bottom > Universal Serial Bus controllers
Expand all Items >
Now Uninstall one by one all the way down...
Reboot Computer when Done.
Plug in Phone... wait till it recognises Device.
Some people have also tried ...
Going into Download Mode, Connect Phone to USB.
System should install a Driver.. and voila!
Done.
DOWNLOAD THIS AND FOLLOW INSTRUCTIONS IF YOU NEED MORE HELP
Please Hit the Thanks Button if I helped you... :victory:
A.I.O Rescue & Recover : LINK
Android Solutions : LINK
Samsung Updates : HERE
Latest Official I9000 and I9000M Firmwares collection : LINK
Modems : LINK
Perka's File Stash : LINK
Z4ROOT APP : HERE
3 BUTTON COMBO FIX : HERE
SECRET CODES : HERE *Use at your own Risk!*
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Procedure To Update Samsung Galaxy S With Cyanogenmod 10
Device must be running latest Gingerbread 2.3.6 with ROOT to begin .....
Remove KIES completely from Phone and reboot Computer then Install latest Samsung USB Drivers then Reboot Computer...
Ensure that your phone battery is at least 85 percent charged
Cyanogenmod 10 Download
Download Google Apps (Optional)
Connect your device to PC by using the cable.
Enable mass storage mode on it.
Now transfer / copy all the 2 files to your device’s internal SD card.
Ensure that you are not keeping it in deep directory.
Now disconnect the phone from computer.
You then need to enter into recovery mode.
To do so, switch off the device completely, press & hold Volume Up button + Home Button + Power key until recovery mode appears.
After entering into recovery mode, select “install zip from sdcard” & then “choose zip from sdcard“.
Navigate to the ROM file (which you’ve transferred earlier)
Select it & press on ‘Yes‘ to continue. ROM installation process will start.
Wait for the ROM to get installed.
After ROM gets successfully installed, your phone will land in the recovery mode again.
Now select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory.
The same procedure you have to do for installation Google Apps. (Just don’t do the above step i.e, don’t wipe the data after installations of Gapps).
After installaing both things, now press back button to land in recovery mode.
Select reboot system now from the Recovery mode to Restart the phone.
Usually first boot of the phone takes some time after flashing of new ROM so be patient....
Done!
Issues if you have any :
LOW STORAGE NOTIFICATION : HERE or See this LINK
If the above doesnt help TRY THIS APP
NO MOBILE DATA :
Toggle Flight mode ON/OFF
IMEI Issue :
Flash a stock version of Android for your device: GB 2.3.6 (JVU, or other) that will restore your IMEI
Then you can backup the /EFS folder.
NO 3G AVAILABLE :
The CSC you used is most likely not intended for your area.
This means that the broadband provider settings are not included and
need to be configured manually.
Go to : Settings->Wireless and Networks->Mobile Networks->Access Point Names, press the settings-button and select "New APN"
Galaxy S i9000 / 9001 Disassembly & Assembly
Will add more links when I can ...
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Snowhiter said:
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Click to expand...
Click to collapse
Your most welcome!
Will add more when i get the time...:fingers-crossed:
Added more useful Links.. should be everything you need
HI,
thank you for this huge How to!
I have big trouble to update my Device.
It is not possible to get in the download mode. I tried SDFormatter, it crashes every time i connect SI, Samsungs Ex. HDD Formater runs but no effects on the Phone. Odin cant flash anything (maybe of course of download modus).
What do you recommend?
Sys:
WIN XP Pro SP3, Samsung Driver, Kies
Samsung SI, Android 2.3, Vodafone (Germany) Branding, No Simlock, SIM insert (E-Puls, Provider), No Ex SD Card, original Samsung USB-Cable
What are you trying to update to?
Using the Format tool try with USB Debugging ON
>
Uninstall Kies and reboot machine
Use my HOW TO Files ...
Install Samsung USB Drivers to install then reboot computer again..
Open ODIN and Check Re-Partition and put in PIT File
Make sure all 3 are ticked...
Also put in PDA / Modem / CSC press start when phone is connected via Download MODE
Press start....
Then just follow the rest to Root it...
Let me know if this helps
If you are wanting to go to CM 10 or JB Kies is no use anyway...no one uses KIES anymore
Thanks a lot. I pressed volume +... That was my fault.
Now runs CM 10.1 Nighlty with Helly Bean!
Tnak you
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
grA$ said:
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
Click to expand...
Click to collapse
Glad it helped
** Updated :victory:
New links added ... should cover everything!
This should be more than enough for anyone with problems with there S i9000 Phones
Re: [HOW TO GUIDE] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★
Thanks for the amazingly helpful thread. I had spent amazing amounts of time looking for a JVU bootloader an could not find it. Now i don't need to as your GB odin files fulfilled all my needs.
Now to test out whether your section on drivers will solve my issues of connecting post GB ROMd phone to my computer.
Sent from my GT-I9000 using xda app-developers app
Your welcome, if you dont need Kies in your computer get rid of it ....
Reboot computer afterwards then Install the Samsung USB Drivers and reboot PC again to take affect....
If Phone doesnt recognise follow the Tutorial on the link if USB not Recognised
Random thought .......Life is so good!
High WAF Wireless Inductive Charging Mod Step by Step Guide
Ok i am a little confused with your guide so decided to ask a few questions
i have read your guide down to after odin and this is where i got stuck
i downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
mazoshi said:
I downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
Click to expand...
Click to collapse
Re-Partition > ON
If you downloaded the ODIN Files all these are included in the files PDA / MODEM / CSC
HERE
What Rom are you coming from etc...
im useing what was on the phone and my phone is upto date so not sure
my kernel is 2.3.35.7-i897UCKH3-CL461307
The wiki states I must be at Android 2.3 build UCKK4 (AT&T) to get to cm10.
I tried the captivate OTA update- says I am at most recent firmware.
I tried kies- and it says unregistered device.
I just bought this phone (new-unlocked) from amazon to replace my failed captivate (running cm10). I really miss CM on the phone. lol.
Can someone point me in the correct direction? I am hoping there is a way to get to cm10 from where I am.
Any help is appreciated.
Thanks in advance
John Kilbert.
ota not a good plan.
read this thread for your path to kk4
http://forum.xda-developers.com/showthread.php?t=1350266
Thnanks. I have read that.
I am here:
Download Easy CWM and Bootloaders Gingerbread here
Dead link. [http://teamkomin.com/Captivate/i897-Speedmod-K13E-GBbootloaders-One-Click.jar]
Actually, they whole site is empty.
Any ideas?
Here ya go....Stock KK4 http://forum.xda-developers.com/showthread.php?p=18370912
Then flash through Odin the .tar file version of KK4 Corn Kernel version 7.0A to get CWM recovery....here...http://forum.xda-developers.com/showthread.php?p=18233847
Then flash through cwm ur Rom of choice.
Sent from my SAMSUNG-SGH-I747 using xda premium
Quick few questions please? (elaboration)
from the read-me / many posts:
**Once u have the i897 Gingerbread Bootloaders, it is not necessary to flash them again. They are
backwards compatible, therefore you can flash Eclair, Froyo, Gingerbread, CyanogenMod, MIUI without issues,
per the proper install instructions.
-Are the bootloarders mentiond, the ones from flashing, or from samsung/att itself. eg. I have stock gingerbread 2.3.4 from the factory, should I use the bootloaders or not?
-Would it hurt to reinstall the bootloaders if there was any question?
- I performed a dry run, and cannot get the "digging down android" I get this:
Android system recovery <3e>
Samsung recovery utils -for bml-
image:
http://imgur.com/bJcQDXU
What I expected:
http://apcmag.com/images/galaxy-froyo-3.jpg
Did I do something wrong? (edit: built a jig- goes into digger mode now)
-since I am on 2.3.4 I am tryin gto install the kk4 you linked-
the instructions say get to download mode (done)
run oding as admin (done)
yellow com lights up(done)
press start? --how does this get to the correct file? do I load it under PIT, PDA, PHONE, CSC?
thanks much.
JOhn kilbert.
Edit:
Here is the "plan"
Prerequisites:
Download Odin3 v1.7.zip & install
Download CornKernel_UCKK4_v70a
Download Rom
Instructions:
1. Get rom onto your internal SD card (copy to phone using PC.)
2. Download and Run Odin Flashing Utility (not Odin one click) Odin3 v1.7.zip (install on win pc)
3. Boot phone into DOWNLOAD mode (by
plug USB cable into computer
have phone shut off
hold both volume buttons
plug USB into phone
let go of buttons when you see an android digging "down"
4. Flash to Stock I897UCKK4 Gingerbread Firmware
*tbd
4. Click RESET button in Odin (beside START)
5. Click PDA button in Odin and find your kernel.tar file
(kk4 corn kernel 7.0A)
6. Click "Start" in Odin
7. Reboot into RECOVERY mode (instructions below) ** Use volume buttons to navigate up/dn and pwr for enter.
have phone shut off
Hold both volume buttons
press and hold power button
KEEP ALL 3 BUTTONS HELD for 3-5 seconds
after kernel bootscreen you will see clockwork recovery menu
8. Select "flash zip from sd card"
9. Navigate to the rom you placed on internal sd in step 1 : select Yes
10. Phone reboots to new ROM.
Here i what I did-
unpacked .zip from http://forum.xda-developers.com/showthread.php?p=18370912
http://hotfile.com/dl/137865417/4bc...S_Bootloaders_Re-partition_Full_Wipe.zip.html
ran as admin the odin file.
pressed the big start button
here is the output.
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> boot.bin
<ID:0/005> factoryfs.rfs
<ID:0/005>
<OSM> All threads completed. (succeed 0 / failed 1)
phone is stuck
any advice?
Have u looked at this Captivate - PC Connection Issues... thread. http://forum.xda-developers.com/showthread.php?p=33227541
Be careful flashin packages with bootloaders. If flash fails during the install of the boot.bin or sbl.bin u could possibly brick ur phone.
If u were on anything gingerbread before this, then u have the gb bootloaders. So u can use a package without the Bls included.
Try a different micro usb/usb cable or diffferent usb port. More info in that thread i linked.
Majority of the time, the trying of a different cord is the solution.
Sent from my SAMSUNG-SGH-I747 using xda premium
Yea, I bricked it. Back running though. Was a hairy couple of hours. lol.
Thanks for your help.
John Kilbert
Here is how I did it (100% working)-
From android 2.3.4.
Directions that worked: I used linux host running a xp virtual machine guest. This may have presented sopme issues, but it worked.
I used the odin method. Each time I connnected the phone I needed to goto devices and click the phone. I need to do this
because I needed 2.3.5 to get a rom installed, and OTA/Kies failed everytime.
Preliminary: Download Rom (and gapps) and get on internal 13gb SD card. power off phone.
Flash to Stock I897UCKK4 Gingerbread Firmware
A. Download:
reference (http://forum.xda-developers.com/showthread.php?p=18370912)
odin or heimdall one click (post #3) I used the odin.
http://hotfile.com/dl/137865417/4bc...S_Bootloaders_Re-partition_Full_Wipe.zip.html
Download file
B. extract
a. run as administrator odin file contained in the archive itself.
b. get to download mode (i used the jig method- button method may be used also)
C. click start.
a. (took me 5 tries to get a successfull install ..whew.. each failure I removed battery
and held the up/down vol buttons and tried again whhile the usb was connected. I believe it may have been a
corrupt download, as when I redownloaded it it worked on the 5th try)
Install CornKernel & Rom
Prerequisites:
Download Odin3 v1.7.zip & install
Download CornKernel_UCKK4_v70a
Download Rom (and Gapps) and get on internal 13gb SD card (if you didn't do it earlier)
Instructions:
1. Get ROM onto your internal SD card (copy to phone using PC.)
a. (my choice- or use yours: wiki.cyanogenmod.org/w/Captivatemtd_Infohttp://wiki.cyanogenmod.org/w/Captivatemtd_Info)
(http://download.cyanogenmod.org/get/jenkins/12598/cm-10.0.0-captivatemtd.zip)
b. Gapps (see 11)
2. Download odin Flashing Utility (not Odin one click) Odin3 v1.7.zip (install on win pc) & cornkernel.
a. (ref http://forum.xda-developers.com/showthread.php?p=18233847 for cornkernel)
http://dl.dropbox.com/u/10453685/android/CornKernel_UCKK4_v70A.tar
b. (ref forum.xda-developers.com/showthread.php?t=1350266 for odin )
http://forum.xda-developers.com/attachment.php?attachmentid=582251&d=1304114050
3. deleted.
4. Run Odin (as administrator)
5. Boot phone into DOWNLOAD mode (by jig or)
a. plug USB cable into computer
b. have phone shut off
c. hold both volume buttons
d. plug USB into phone
e. let go of buttons when you see an android digging "down"
(if you get a different screen- try making the jig-its easier especially if you have large clumsy hands like me) or-
(http://forum.xda-developers.com/showthread.php?p=33227541)
6. ODIN should see yellow slot fill as you connected phone.
a. Click RESET button in Odin (beside START)
b. Click PDA button in Odin and find your kernel.tar file
(kk4 corn kernel 7.0A)
c. Click "Start" in Odin
d. wait fro pass.
e. phone will reboot with a corn kernel.
7. Reboot phone into RECOVERY mode (instructions below) ** Use volume buttons to navigate up/dn and pwr for enter.
(ref: http://forum.xda-developers.com/showthread.php?p=33227541 for problems)
a. have phone shut off
b. Hold both volume buttons
c. press and hold power button
d. KEEP ALL 3 BUTTONS HELD for 3-5 seconds.
e. after kernel bootscreen you will see systemcorps cwm recovery menu. if not try again
f. Select "install zip from sd card" option from menu.
g. - choose zip (option in menu)
h. Navigate to the rom you placed on internal sd in step 1 : select Yes
8. Let reboot and install
a. phone will reboot on its own a few times
b. when finished it willleave you at cwm recovery menu.
c. choose reboot system now.
9. Shutdown, reinstall SD & SIM
10. Use as normal. done
11. Realize you need gapps!
a. should have put in in the folder back on step 1. If you did this you could have installed it at step 8 just after (b.)
12. download correct gapps and place in root (same place as rom.zip)
(http://wiki.cyanogenmod.org/w/Gapps)
13. Reboot phone into RECOVERY mode ** Use volume buttons to navigate up/dn and pwr for enter.
(ref: http://forum.xda-developers.com/showthread.php?p=33227541 for problems)
a. have phone shut off
b. Hold both volume buttons
c. press and hold power button
d. KEEP ALL 3 BUTTONS HELD for 3-5 seconds.
e. after att/ cyanogen kernel bootscreen you will see cockwork mod (not syscorp) cwm recovery menu. if not try again
f. Select "install zip from sd card" option from menu.
g. - choose zip (option in menu)
h. Navigate to the gapps.zip you placed on internal sd.
i. choose yes
j. wait for complete (watch bottom of screen)
k. choose go back
l. reboot system now
m. will take longer and say upgrading.
14. done (update google info under settings-accounts)
Good deal. Glad u got it goin !
Sent from my SAMSUNG-SGH-I747 using xda premium