Database Develop

Help with /efs problem

Ok, so I was updating my phone to froyo according to these instructions by Virnik0 (meh, it seems I can't use links in my posts), but the name of the topic is "[HOWTO] manually flash Samsung Galaxy S with JPM firmware ** WORKS **" And you can find it from these forums.
Everything went fine. I successfully updated my phone to froyo, but I didn't root my phone or install lagfix even though the person gives instructions on how to do so, instead I just jumped into this part. This is a quote from the instructions.
GUI Medthod:
Download Android Mate from the Market
- Open the Android Mate, and switch to File Explorer bookmark at the top
- navigate to the /efs folder
- by ticking, select nv_data.bin, and from the bottom menu, choose copy.
- navigate to your sdcard directory (/sdcard for internal SD, or /sdcard/external_sd for external SD, does not matter)
- press Paste from the bottom menu.
- Connect you're SGS to the usb and download ''nv_data.bin'' to your computer
- Open ''nv_data.bin'' with notepad or wordpad and search for ''KOR'' change this to the product code matching your country
Click to expand...
Click to collapse
Now after I have downloaded "Android Mate" and navigated to the /efs folder to my surprise I find that it's empty and doesn't have such file named "n_data.bin" or any other files for that matter.
What does this mean and how do I get such files there?
After searching forums I found out that you should take backup from those files in /efs, but that was not mentioned in the instructions I was following
Edit: This is what I did before I jumped into the part I have quoted above.
1] Download both I9000XXJPK and I9000XXJPM firmwares
2] Download Odin 1.3
3] Download 803 pit file
4] Startup Odin.
5] Extract I9000XXJPK and I9000XXJPM tar files which you have downloaded to separate folders.
6] Then in Odin: (Now we will flash JPK firmware)
a) Click PIT Button, select s1_odin_20100803.pit file
b) Click PDA Button, select I9000XXJPK-REV03-PDA-low-CL584433.tar.md5 file
c) Click PHONE Button, select MODEM_I9000XXJPK.tar.md5 file
d) Click CSC Button, select GT-I9000-CSC-MULTI-OXAJPK.tar.md5
e) Tick Re-Partition Button
f) Power off your phone and make sure you have SIM card out, SD card out.
g) Press and hold 3-button combo, to boot your phone in Download mode (Volume down, Menu, Power)
h) Once in Download mode, connect your phone to your PC via USB cable
i) In odin, ID:COM field shall change color to yellow, and in Message window, you will see message "Added"
j) Now press Start button.
k) Go and take cigarette, coffee, etc. This will take up to 15 minutes.
7] After successfull flash, phone will reboot itself, and Odin will write Success message. First boot can take another 10 minutes, so be patient during stare at glowing S logo on the screen.
8] If phone stays in text console (Recovery Mode) after reboot, writing (with red), that it is having problem with internal SD Card, do not panic, it will take another minute:
a) Just use Volume Down/Up to up or down movement and selection.
b) Select "Wipe cache partition" and press Home
c) Select "Format internal sd card" and press Home
d) Select "Wipe data / Factory reset" and press Home
e) Select "Reboot" and press Home
9] Get back to point 7]
10] Power off your phone again, press button combo for Download mode again.
11] Close Odin, start it again. It shall detect ID:COM port again.
12] Now press PDA, choose JPM_JPM_U_JPM.tar file (finally, JPM firmware).
13] Make sure Re-partition tick box is unticked.
14] Press Start
15] After reboot, you will have newest Froyo firmware available.
Click to expand...
Click to collapse
Edit2: Could it be that I need to root my phone in order to see the files in /efs?

Yes you need root.
Sent from GT-I9000 jpo. My own kernel for z4mod and with 341MB Ram

DamianGto said:
Yes you need root.
Click to expand...
Click to collapse
Thanks, now I see them and I was able to change the product code

[Q] Not able to update ROM

Hi All,
These are my mobile details previously :
Mobile details: Samsung Captivate
ROM:FROYO.UCJI6
KERNEL VERSION: 2.6.32.9 [email protected] #1
BASEBAND VERSION:I897UCJI6
FIRMWARE VERSION:2.2
nUMBER OF aPPS: 46
I am new to the ROM world and this is my first time.
So i strictly followed the tutorial in this link on "[HowTo W/Pack] Flash Stock I9000 2.3.3 NEE Updated (again) 4/25/11"
http://forum.xda-developers.com/showthread.php?t=1045734
Which says :
1. Wipe data and cache/Factory Reset with CWM. (pull battery when complete to shut off phone)
2. Find the "GT_I9000_XWJVB_XXJVK_NEEJV3_Sbl.exe" file and click it and extract its contents into its current folder.
3. Open up Odin 1.7 and now select the 512 pit file I included, and select all the files in the necessary place in Odin and make sure "repartition" is selected". your odin should look like this http://d.pr/Ixt2
4. Put Your phone in download mode and connect, now hit start. (THIS IS WHERE THE ONLY DANGER IS, YOU ARE NOW FLASHING 2.3.3 AND THE NEW BOOTLOADER INCLUDED WITH 2.3.3 Just dont unplug your cable or have your computer die, otherwise you will be 100% Clear)
5. Boot up normally and let things settle.
6. now power off the phone and wait for it to shut off completely. at this point hold down "Volume down and Power" at the same time and wait till download digger appears. Open up Odin and select the 512 pit and xcals kernel(In the PDA box) I included and DE-select repartition if it auto selects and go ahead and connect your phone (Obviously needs to be in download mode) and flash.
7. The phone will reboot and once again let things settle (media scanning and whatnot). Plug in the USB cable and transfer the folders included in this pack named "Fixes and modems" and also "For Rooting" to your phone. then power off the phone once again. this time hold down "Volume Up and Power" as soon as you see the screen turn on let go of the power button and continue to hold volume up until you see CWM.
8. at this point you should be in CWM (Woot!). navigate to flash zip from SD and then navigate to the folder "Fixes and Modems" and flash "Enable CRT Lock.zip" and "update-xvjvb-home_button_fix.zip" and I recommend flashing "modem_ugjk4.zip" as JK4 seems to do the best.
9.Reboot. At this point reboot and you should be on stock 2.3.3! Congrats!!
10. If you want to root read the txt file i included for rooting!
I was able to install the ROM till the 7th step,but from there iam not able to apply the fixes and modems.
Once i press the volume up and power button its taking me to Andriod system recovery <3e> mode:
I have four options here:
1)reboot
2)update from sd card
3)wipe data card / factory reset
4)wipe cache parition
when i choose update from sd card by pressing power button,nothing is happing.
Can anyone help me in this regard.
Another issue iam facing is when i make call installing this rom my normal speaker under the at &T logo is not working,i have to switch on the speaker to talk to anyone, and thereturn key is also not working.
Best Regards,
Chandu.

I gt it resolved after installing the correct rom
Sent from my GT-I9000 using XDA App

Verizon tab(need tar file)

My tab is just hanging at samsung logo i cant even get into recovery i need help badly guys please i need to gk back to stock but dont have file for odin
Sent from my ADR6400L using XDA Premium App

i don't think there is a tar file for the vzw tabs. odin is generally better with the GSM devices. download heimdall, and then download the ec02 files. plug your phone in, and boot into download mode (power + vol down) put factory in system, param in param, cache in cache, and the zimage in both kernel and recovery. hit start. this will take you back to stock.

1. download heimdall. get it here: http://forum.xda-developers.com/showthread.php?t=755265
2. download the stock verizon files. get them here: http://www.blackmugmedia.com/Android/GT/Mirror/Recovery/CDMA/Verizon/VZW Stock/
you need all four files.
3. download the drivers for the samsung sch-i800. find those here: http://downloadcenter.samsung.com/c...G_USB_Driver_for_Mobile_Phones_v1.3.350.0.exe
4. unzip heimdall. go into the drivers folder, and run zadig.exe. at the top, select 'list all devices'. go to the dropdown menu, and select Samsung Composite USB (i'm pretty sure that's what it was called.) click start, and let it run.
5. open the heimdall front end.
6. put system in system (if you're flashing to ec02, then put factory in system)
put cache into cache
put param into param
put the zimage into both the kernel and recovery slots.
7. turn your tab off, and plug it into the computer using USB. hold down the power and the volume down buttons until you see the little droid dude with a shovel.
8. click the start button on heimdall.
9. wait for the flash to complete (don't unplug your device, obviously, during the flashing.) once your phone reboots, it's okay to unplug it.
10. now, boot into the stock recovery, and wipe data and cache.
11. enable usb debugging.
12. plug your phone back in to the computer.
13. now run superoneclick for root.
14. either play with it in stock, or go find oldmacnut's excellent Better Than Life Rom, and follow the instructions to flash that.
15. enjoy your tab!

Quicky. installing latest kernel guide

Hi,
Sorry, I know this has been covered loads before but im still a little confused on the method.
Im running a great custom rom on my SGA called MindCR. I would like to be able to flash an updated custom kernel.
Im attempting to flash Rafael.Baugis. E3 Stable.
Code:
How to install Kernel with E3 Recovery (Stock):
shutdown the phone
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-XXX-boot.img.zip )
wait the end of process and reboot
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( Select_you_rom_file.zip )
wait the end of process
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-modules.zip )
wait the end of process and reboot
Do I download stock-kernel.tar ? and from the stock recovery, apply update from sdcard, choose stock-kernel?
Do I need to wipe cache afterwards?
Sorry this is so easy for most, but to me those instructions are confusing!
many thanks for your help xda
(ps,. i would of posted this in the dev section but i don't have enough posts)

The solution is in your post itself..
From Rafaels Skydrivd download the two files.. And flash exactly as given in his post
GT-S5830i

sam1136 said:
The solution is in your post itself..
From Rafaels Skydrivd download the two files.. And flash exactly as given in his post
GT-S5830i
Click to expand...
Click to collapse
A: .tar files are to be flashed in Odin
- on the phone go to download mode: keep the [+] and [-] pressed while you power on, when the menu pops out, press [+] again
- on the pc launch Odin, connect the phone with the usb cable, it should lite up a COM-x port if drivers are installed (Rafael provides those too)
- in Odin, press the PIT button, select the cooperve_0623.pit file, press the PDA button, select the 2012***E3-PDA-boot.tar file, uncheck Re-Partition. Start!
B: .zip files are to be flashed in recovery mode, no need for PC
- move the zip file to the sd card
- go to recovery mode: keep the [+] and [Home] pressed while u power on for around 8seconds, a recovery menu will pop out soon after. if it reboots you've kept the 3 buttons pressed too much time, try again.
- select browse for zip file. choose 2012***E3-boot.zip. flash it. choose 2012***E3-modules.zip. flash it. Reboot. No need to wipe anything.
Everything should be clear from Rafael's kernel post, link to files is <<< Custom Kernel and Modules >>> and you can navigate outside the default skydrive folder to find stuff like windows driver and etc.
you can navigate there upper so you will find also driver files etc.

bobdynlan said:
A: .tar files are to be flashed in Odin
- on the phone go to download mode: keep the [+] and [-] pressed while you power on, when the menu pops out, press [+] again
- on the pc launch Odin, connect the phone with the usb cable, it should lite up a COM-x port if drivers are installed (Rafael provides those too)
- in Odin, press the PIT button, select the cooperve_0623.pit file, press the PDA button, select the 2012***E3-PDA-boot.tar file, uncheck Re-Partition. Start!
B: .zip files are to be flashed in recovery mode, no need for PC
- move the zip file to the sd card
- go to recovery mode: keep the [+] and [Home] pressed while u power on for around 8seconds, a recovery menu will pop out soon after. if it reboots you've kept the 3 buttons pressed too much time, try again.
- select browse for zip file. choose 2012***E3-boot.zip. flash it. choose 2012***E3-modules.zip. flash it. Reboot. No need to wipe anything.
Everything should be clear from Rafael's kernel post, link to files is <<< Custom Kernel and Modules >>> and you can navigate outside the default skydrive folder to find stuff like windows driver and etc.
you can navigate there upper so you will find also driver files etc.
Click to expand...
Click to collapse
thanx ....

Ahahahhhhahahahah lol
Quicky
Sent from my GT-S5830i using xda app-developers app

[Stock][Guide][ROM] Last Egyptian Stock ROM

Hi Guys,
Some people faced some problems with flashing stock ROM with Odin, so here is a guide for a perfect flash.
Steps:
1) Download all files attached downwards.
2) Check that you have Samsung Kies on your PC.
3) Install Samsung USB drivers then restart your PC (in this step don't connect your phone to PC or you must restart your PC to install it.
4) Open recovery mode on your phone( volume up + home + power) and wipe data/cache via CWM (if you want it it will be attached downwards), then format your phone with rio's multi formatter to RFS (stock format type)
5) Open odin v.3.07
6) Open download mode on your phone ( volume down + home + power) and then connect it to your PC.
7) Put your ROM in PDA as SS attached downwards then tick PDA.
8) Make sure that Re-Partition is not ticked.
9) Press Start and wait few minutes.
10) If your Odin is stuck in connections, close Odin and Reinstall Samsung USB drivers.
Enjoy!!!!!!!!!!!!!!!
Downloads:
1) Samsung USB drivers:
http://www.mediafire.com/download/4ano45gsfx8lfub/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
2) Odin v.3.07:
http://www.mediafire.com/download/n5hdq5v5j55saie/Odin307.zip
3) Egyptian Last ROM:
http://www.mediafire.com/download/kld6y1wi8jns14c/S5570IJPLF1_S5570IOJPLE2_EGY.zip
4) Rio's Multi Formatter:
http://www.mediafire.com/download/72cxxiyamm755w6/multi-formatter-v1.zip
5) Clockwork mod ( will not remove your recovery):
http://www.mediafire.com/download/ct8m3ap7320lf43/pop_plus_CWM.zip
CREDITS:
@rio. for his multi formatter
@myaservip for some steps
@biso46
If you need you stock region ROM you can go here:
http://www.sammobile.com/firmwares/2/

Another Method

myaservip said:
Another Method
Click to expand...
Click to collapse
But btw my method is easier and It works.
You musn't divide the .md5 to let it flash.
And I'm not arguing that your method is good, but my method is esaier for noobs .
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words

installing stock roms r toooo long fineshed with
why u descusing something we already used and known
stop this ...flashing stock roms not a game for pro or noobs !!!