Related
Hello,
I read about the froyo rollout and I fired up Kies. It prompted me with an update and I've done it. After that my SGS can't connect to Kies: the app on the mobile keeps restarting and it doesn't stops. The only way I found that lets me connect is to restart the phone, be very quick and connect it very early. That way it will work, otherwise there is no way. I can't browse my files or anything. Is there a way to solve this?
I have the same problem... Most of the time I get the flashing back and forth to the MTP app. Sometimes (very rarely) it connects.
Try clearing your caches. Download Cachemate for root. You need to have root enabled for it to work.
Also search for FileSearcherforKiesFix and look at the guides for that.
At the moment I can't get anything to run but you may get lucky.
Try to remove your sd card and restart
Sent from my GT-I9000M using XDA App
Same issue here on a bell i9000m. I thought i messed up the drivers some how, but im glad to see im not the only one. If you look in device manager, you will notice the mtp driver is not installed properly. Several attempts to manually reinstall driver failed for me.
Win 7 64bit.
Sent from my GT-I9000M using XDA App
Hi.
I am also with Bell on an i9000m and my kies does connect to my device but some things arent working properly.
Example... I check for new firmware (which there isint any yet) and now i get an option to back up my contacts before i flash. I tried this and after about 5 mins it comes bqck saying that there was no response from my device.
This is a bit worrysome for me as i have read some people in europe who were flashing to froyo had the upgrade stop and hang about half way through the process which essentially semi bricked their phone and they had to flash back throuh odin. They said it was like the phone had become "non-responsive".
Anyone else here with a similiar issue as mine? Any advice?
Thanks...
Sent from my GT-I9000M using XDA App
Kies is the worst POS pice of software I have ever tried. I spent 3-4 hours getting Kies to connect to my phone in order to update to Froyo. Installed drivers, unistalled drivers, installed again. Unmounted cards and connected. Unmounted and remounted.
What finally worked for I problem I had with a flashing MTP Application was to delete the contents of the internal SC card.
This only became an issue for me when i used kies to update to jh7. Now everytime I try to connect to kies, my phone not only unmounts both cards, but will not let me remount. i have to reboot the phone just to get the sd's working again. I tried yanking the external and all that did was throw my phone into a borkfest, and that simply makes zero sense. . .
Hey there, i have searched around for a day or so and found a similar post on here but no real answers thus far. There is a ton of information out there so i may have missed it but my phone is having issues so i really need to wipe and go back to stock, then update from there...
Running Cognition v2.2 Beta5.5 UCJ16. Love the rom but i have had some issues and decided to upgrade to the new Cog rom then found out i cant without going back to stock first. Tried to do that with "Odin" but i get the USB not recognized when going into download mode, Odin will not pick up the phone. I did read the entire Odin faq and saw that other ppl have had this issue but did not really find a solution. I can get into dl mode fine and i've never ever had an issue with my cpu not picking up the phone via the USB until now. Tried the adb reboot, volume buttons, everything in the faq, it's a no go & all my drivers are up to date. So far i can't do anything and it's getting a bit frustrating lol.. I rooted with the Galaxy S One click Root by TGA_Gunnman, not sure if that helps any.
Any help would be appreciated, thanks in advance!!
Also meant to ask, if i can't go upgrade to the new version of cognition can i flash from that one to a different rom and them maybe back to 2.1? I'm not a noob to rooting and flashing i did my last 2 phones and have rooted this one, i haven't had one single problem with anything of my phones until this one...
Try a different us port the ones on the back seem to work better
Already tried that same result, it won't recognize the device. I have to go out of town in a few days and need my phone to quit acting up lol. If i can't get it resolved by tomorrow i guess i'll just start trying to flash other roms and see if i can find one it will take and go from there..
CoolhandLocke said:
Already tried that same result, it won't recognize the device. I have to go out of town in a few days and need my phone to quit acting up lol. If i can't get it resolved by tomorrow i guess i'll just start trying to flash other roms and see if i can find one it will take and go from there..
Click to expand...
Click to collapse
Usb debugging turned on? You have odin opened up BEFORE you put your phone in download mode? Technically you don't have to odin to stock you just have to odin to a Rom that has 2e recovery. So you could try that if you can't get one click odin to work.
Sent from my SAMSUNG-SGH-I897 using XDA App
Yes i tried it with de-bugging turned on and odin running before hand. Pretty much tried everything in the Odin thread and about everything else i could find with google. The phone's just acting funky and not accepting it
CoolhandLocke said:
Yes i tried it with de-bugging turned on and odin running before hand. Pretty much tried everything in the Odin thread and about everything else i could find with google. The phone's just acting funky and not accepting it
Click to expand...
Click to collapse
How are you putting your phone into download mode?
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm getting into download mode through doing the volume up/down then inserting the usb cable with the sim and everything out. I believe it's method 3 listed in the Odin post, it does go into download mode but i still get "USB not recognized" from both the front and back ports..
Finally got it fixed! Just tried it out on my friends laptop and everything worked flawlessly. Must be a problem in my Desktops USB somewhere but it is still odd as it worked fine and still does, just didn't work with Odin. I've seen other people with the same issue hopefully someone else can learn from my mistakes....Just try another PC lol.
CoolhandLocke said:
Finally got it fixed! Just tried it out on my friends laptop and everything worked flawlessly. Must be a problem in my Desktops USB somewhere but it is still odd as it worked fine and still does, just didn't work with Odin. I've seen other people with the same issue hopefully someone else can learn from my mistakes....Just try another PC lol.
Click to expand...
Click to collapse
I am glad you got it working cause I had ran completely out of ideas lol
Sent from my SAMSUNG-SGH-I897 using XDA App
Not to extend the thread but in my previous post i forgot to add, Thank you to all of you who tried to help!
Hey folks. I'm hoping to get through this in one piece, with one walkthrough.
I recently messed up in flashing a Rom to my Captivate. It cleared the phone of firmware and left me with the AT&T splash screen.
I bought a jig, and am now at the "Downloading..." screen and am trying to take this slowly to ensure a properly functioning phone (I've been without for two weeks now).
I've read through the sticky post [link]http://forum.xda-developers.com/showthread.php?t=884364[/link] and have most of the downloads. The Odin link is dead, and I don't have the proper version (I used a version I later found out was bad).
What I'm hoping for is to get someone to show me where the proper version of Odin is, and maybe give me a quick guide to doing this for a Rogers Galaxy S Captivate.
I hope I'm not coming off as lazy, but I tried this solo, and it went awry. Thanks for any help in advance.
This is the link for Odin. http://forum.xda-developers.com/showthread.php?t=731989
You want to Open Odin, then use the jig to put the phone in download mode, connect usb to your computer and wait until odin recognizes your phone. Click Start and sit back and wait. You should then be able to put whatever rom you want on the sd card and flash
Okay. I got the proper download, and used Odin. It reported success.
I haven't unplugged the phone from the computer yet, but it's also not showing as a drive on my computer. I'm at the stage where I'm supposed to root the phone after using Odin and before flashing.
Should I unplug the phone, or is that going to send me back to square one?
JavaMac said:
Okay. I got the proper download, and used Odin. It reported success.
I haven't unplugged the phone from the computer yet, but it's also not showing as a drive on my computer. I'm at the stage where I'm supposed to root the phone after using Odin and before flashing.
Should I unplug the phone, or is that going to send me back to square one?
Click to expand...
Click to collapse
If you used that Odin 1 click you will have the AT&T version, it will work but you will have the AT&T boot up screen. After it is finished your phone should reboot by itself. If it didn't try pulling the battery and then turn it back on.
Driver Installation Issue at Fault?
Okay, so I'm starting to wonder what's going on with the communication between my phone and my computer. I have the drivers, but when I try to install them (64 bit, for a dual-core, right?), it claims to fail.
I think maybe that this is the reason I can't get the computer to recognize the drive. Also, when plugged in last time, it said it failed to install drivers again. Even when the phone was operational, I had issues with that.
So . . . I'm wondering if maybe I solve that and the issue becomes seamless. Any thoughts on this would be appreciated, as it seems I'm stuck until I get the phone to register. Even Odin won't see it now, although I've already passed that step. F-Bomb.
Did you get the drivers right from samsung web site if not thats why they wont install i had same thing when i got my cappy.
I got drivers from.samsung.com installed em worked perfect sence. i kept the download saved had to install em a few times over the last 9 or so months. Only because of all the dam software hardware i run. Good luck
Sent from my GT-I9000 using XDA App
Just because it's a dual core processor in the computer doesn't mean you have a 64 bit OS.
You might want to know what version of windows you have...just a thought.
Okay . . . I can't seem to resolve this driver problem, nor can I move forward in the previous issue of getting my phone back to a functional state.
I can't imagine what I'm doing wrong that everyone else managed to avoid. Could I maybe request some one-on-one time with an experienced Rogers user? Just to recall the exact steps they took in order to successfully UNSCREW their phone.
Again, I appreciate all the help. Every post is making progress. I'm just frustrated at my ineptness with solid state installations.
I'm still not able to install the drivers or get my computer to register the phone as a drive. I did a bit more reading, but I've found nothing but different driver links. Has anyone else had this installation failure?
I have had driver problems before...try plugging up phone; on computer control panel, device managment , go to were it has device (just click then till se something about samsung) then uninstall drivers, next unplug phone, reinstall drivers that are on design gears (developer) thread for odin one click, next plug up phone sbf it will say new hardware and install drivers then see if that works... Ps if need to just pm me and I will get back to you to try and help
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
A side note: I just tried it from my computer and the link if good and they work
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Try it again, however this time plug your USB cable into the USB port in the back of the computer.
Drivers were installed properly with Toolbox. Thanks for the help
Hey there, i am feeling somewhat overwhelmed with all of the advice going on out there and need someone who can give me the answer to my specific problem hardware wise without breaking a sweat...
I flashed a froyo 2.2 rom onto my phone a while ago, recently all of my apps stopped working, and i could no longer install any apps.
Couple days ago i tried openning gmail and the screen went black and gave me the bzzzzzz...............................bzzz...bzzz...
vibrating error that you usually get when an app crashes.
Now the phone continues doing that even when booted up and stuff
It starts right after the S screen and repeats until the battery is removed.
My phone can't get into download or reset mode using the 3 button method so i bought a jig off of ebay, works like a charm.
however NOW, i cannot get the computer to see the phone; both when it is on and attached and in download mode and attached. Odin can't see it, neither can Kies.
If i can get either to see it, i can look up the flashing process to make sure everything is right.... but as of yet nothing i am doing is making a difference.
Thanks for any help
Ok, I'd focus on odin so disable Kies (in task manager processes - all the kies processes).
Then I would 1) reinstall the drivers (standalone ones) 2) Have a few versions of odin to try (like 1.3, 1.7 and ez odin) 3) Clean your usb port on the phone (and computer maybe too - whats the harm?).
Usually if you are sure the drivers are Ok then you should be able to odin working with a nice clean port. They are more sensitive to dirt/moisture or whatever than they should be.
Try that and let us know...
BTW Some people think that the order is important but I've never noticed that. I always have odin open and then connect it but cant hurt to try the other way around too.
Hey thanks alot,
I am at work right now but i am optimistic about trying that out lol.
Just so i know for when the time comes and if Odin works, what files do i need to flash it? .pit, .tar and anything else specific for Bell Canada?
I only ask because you are with Bell so it is probably a very simple answer for you. Otherwise I am sure i can find it elsewhere.
Thanks,
I'll keep you updated
Josh
Download the complete jl2 rom from link I posted yesterday (search my posts) with repartition ticked, then flash the kc1 rom from stock rom link on xda or at samfirmware.com and flash without repartition if you want the latest. You could just try the kc1 step but I you need to repartition.
Sent from my GT-I9000M using XDA Premium App
Hey man,
my phone has never been sent in for repairs or replaced...
I was reading one of your other posts and you advised another member to send it in and maybe they will replace/update hardware?
I have still had my phone for less than a year so sending it in will be no problem at all...
Should i flash to the latest myself or return to stock and send it in?
I really appreciate your help.
Thanks
Well he knows his is broken as he can see that his internal memory reads 0 (which means its cooked - ask me how I know...) and he was trying to fix it in a round about way. Or there was the guy who flashed a captivate rom - that was just a big no-no.
You might just have a corrupt partition or some other corruption in the file system. I seem to get that all the time and its a pain but very fixable .
Alright, sooo
-uninstall Kies
-install drivers only
-try to connect to Odin
-If succesful flash with Odin
-dance with joy
Got it, I will update you later when i get home.
Thanks
installed drivers on my work computer (32 bit windows xp) and nothing... I've tried phone off, phone on, phone in d/l mode... It doesn't pick up anything...
I can try it on my Windows 7 comp at home and see if that works but i'm wondering what the worst case scenario is just bringing into Bell and having them fix it... Am i looking at charges, warranty voiding, etc.. etc... to have it fixed or could i BS my way out of it?
Fuuuuuuuuuuuuuuuuuu
pretty sure i flashed the wrong firmware on my phone, when it boots up it says GT-I9000 not GT-I9000M.
It worked fine for like 6 months so i never questioned it... damn damn damn
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
I9000 firmware is completely compatible. The text you see is from the kernel which are always for i9000 unless you have one of the three bell firmwares. So that's not the issue.
Sent from my GT-I9000M using XDA Premium App
RogueCow27 said:
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
Click to expand...
Click to collapse
I would keep trying. I have gotten warranty before and I was in the same predicament as you almost except I knew that the internal memory was dead. But that was also around the time when most of the I9000M models were dying. They might be checking more now.
If you get odin to flash a stock rom then you can go for it but by then you should be able to fix it.
Sent from my GT-I9000M using XDA Premium App
Alright i will keep trying.
As far as the firmware goes, my gf and i both have the same phone, but she kept heres official and i put custom roms on mine (just the 2.2 because it wasn't available)
We are both on bell canada so i asked her to boot up her phone and the beginning message on hers says GT-I9000M so it freaked me out lol
I will try on my home computer,
keep your fingers crossed for me
Alright, so Odin can now see my phone (it was the damn cord, my Win 7 comp couldnt see it but my xp work laptop can)
Which firmware would you recomend flashing? Stock gingerbread or a slight variation?
I am at work right now so i can wait a bit for a good response. It'd really help me out if you could provide links and tips to the best firmware out right now (i have no problem flashing a custom ROM if it is good).
Thanks alot,
Josh
Succesfully Flashes Gingerbread 2.3.4
Thanks for all your help!!!
how did you manage to see it in odin?
i have te same problem with restarting just after first screen (after flashing to gingerbread) but i cant see it in odin so i cant flash it again?
when i connect it when turned off, a small icon appears with usb connected sound but its still not visible.
Is it maybe my win7?
help, anyone please
Did you start in Download mod? Did you kill the Kies processes in you Win7 task manager ?
If yes, sometimes Windows takes time to install the drivers (be sure ton be connected to the internet), you should also close and relaunch Odin.
i launched download mode with sdk, and now i cant start it.
i went to another pc with xp. it installs drivers but odin cant recognize it.
Well i did it on my work XP computer becuase WIN 7 wasn't recognizing it. But it turns out the whole time the cable i was using would connect to charge, but not act as a pc connection.
Hi everyone,
I have in the past switched roms on my Galaxy S before, therefore the issue of bricking my phone is something that doesn't intimidate me too much. However, this time i'm really stumped, and I turn to the gurus here at the forums, hoping a solution can be found.
I had just gotten my phone back from getting its screen repaired (which makes this especially irritating), and my carriers had flashed my phone back to their stock version of android, meaning gingerbread with a lot of bloatware. I decided straight away that I wanted to root my phone today, although I was away from my PC. I had my laptop with me (Macbook Air), but I had never done any flashing from it before, not to mention ever using Heimdall before (I had always flashed with Odin). I downloaded everything, and then I made my first mistake: I flashed a speed mod kernel (I believe it was a froyo kernel), and after reboot my phone wouldn't go past the splash screen. I could still get into recovery and download mode. Then I decided to try playing it safe, and I downloaded stock firmware packages for Heimdall fro the forums here. I tried flashing JVS on my phone, going exactly by the instructions written in that same thread that I found the packages, but the flash didn't succeed. Instead, I got an error message saying the PIT file didn't reach the end of the transfer (or something like that...) and the phone rebooted. After that attempt, the phone went black. Nothing works anymore except for download mode. Now I thought that as long as download mode works, I'll be ok, so I tried flashing different packages through Heimdall, and eventually when I got home I tried using Odin on my PC. The problem is, my PC doesn't recognize my phone anymore (even though the drivers are installed and I never had an issue with that before), so I'm pretty much stuck with a brick for now.
I really don't want to go back to my carrier again, and hope to get my phone back in working order without paying too much. I still think there's hope as long as download mode works.
Does anybody have any suggestions what I might be able to do? Since my PC doesn't recognize my phone (and therefore Odin doesn't either), the only semi-working option left is using Heimdall somehow, but as to how to use it, I'm in the dark.
I would really appreciate any help you guys can give me. Thanks a lot!
Aaron
first try reinstalling the drivers and try again. if you can get download mode, should be repaired.
Thank you very much!!!
I knew that download mode was a good sign, but I started freaking out as soon as Odin wouldn't recognize my phone, since it never has had that problem. Reinstalling the drivers did the trick, and flashing worked.
Sometimes the simplest solution is the best. Again, thanks a lot!
commandozzz said:
Thank you very much!!!
I knew that download mode was a good sign, but I started freaking out as soon as Odin wouldn't recognize my phone, since it never has had that problem. Reinstalling the drivers did the trick, and flashing worked.
Sometimes the simplest solution is the best. Again, thanks a lot!
Click to expand...
Click to collapse
We are here to help.