I was wondering if I would be able to get A2SD setup on an existing rom or would I have to partition my sd then do a fresh rom flash before A2SD would work.
Yes, you would gave to reflash. Also, POST IN THE Q&A SECTION.
You don't have to reflash your ROM. You just have to partition your SD card, then flash the Darktremor apps2sd.
Instructions and everything are here
http://forum.xda-developers.com/showthread.php?t=715116
Related
Right now I have an SD Card with applications already installed in it using the ext4 partition and I am using Modaco r14 ROM.
Now, If I upgrade to a different ROM, let's say I upgrade to CM 5.0.6 or Modaco r22, all the applications installed in the SD Card ext4 partition will be ready and available in the newly installed ROM ?, or I have to do something with them ?, thanks
If you upgrade to a new version of current rom they will be thete aslong as you dont wipe ext. Use titanium backup it will remain on sd after wipe aslong as you dont format sd .... oh and try q&a section not development
Thread moved to Q&A... it seems to belong here.
I like to wipe between roms and use titanium backup to restore my apps and data. It lowers your chances of issues considerably.
But otherwise yes, if you don't wipe your ext partition your installed apps will not go anywhere.
I also backup my apks with astro file manager.
-------------------------------------
Sent via the XDA Tapatalk App
Does a2sd Darktremor work with Enomther's ROM?
I've installed a2sd darktremor via the zip file in recovery.
the sd card has an ext3 partition.
When in terminal emulator, typing /system/bin/a2sd check comes back with "not found"
Thanks
Enomther's ROM contains built-in support for A2SD. Absolutely no need to install anything else, just to look in the thread and in Spare Parts.
You can simply check app2sd related options(including dalvik cache moving) in spare parts. However, since you flashed Darktremor's over, I don't know if it will work well. If not, you need to wipe all, then flash the ROM again.
Thank you for the replies.
I've made a clockworkmod backup before I started tinkering, so everything is backed up.
The only changes i made, was to change my micro sd card from the standard 4gb FAT32 partition to a 8gb one (7gb FAT32, 1gb ext3)
In spare parts i then enabled oldstyle-extfs-apps2sd.
I noticed the free space on the internal storage increased from ~20mb to 60mb.
The a2sd storage 120mb has currently been used. My question is what exactly is in the ext3 partition and how do i move apps there ? (is it possible to individually move them)
Finally a bit OT, but a when doing a titanium backup i'm assuming this will still back up all system/user data?
If you check A2SD option - ALL your apps will move to EXT. Their data and Dalvik cache will remain on the phone.
If you check Cache2SD - Dalvik cache will also move to EXT.
You can't move the apps data to SD, unless you do it manually.
TB will backup everything.
All the rest you can read about in DarkTremor's thread.
hi, i've looked everywhere for help and i just can't understand for some reason. so i'm trying to set up DT a2sd on a gingerbread rom that supports it. so i partition my sd card using clockwork mod for 512mb ext partition. then i wipe data using clockwork mode so it wipes everything, but then when i run the rom there is no a2sd partition seen by quick system info and my memory fills up quick. this is after i have flashed a compatible rom and the latest dt a2sd zip. when i look at the sd card on my computer it shows that the ext partition i created is in fact ext4, which i think isn't compatible. so when i manually set the partition to ex3, and run a rom, the apps install onto the ext partition but they force close and i can't open any of them. and when i wipe in clockwork mod, it converts the ext3 to ext4 again. any help?? thanks
Hi all,
my fist post on xda and a noob as well with my first android.
I had someone do my first root and put GEOs rom, as i wanted close to stock to learn android some more, I now want to jump on your rom. the A2SD version
so I try to partition SD card for A2SD+ through clockwork.Then download your rom. By rom manager.
before flashing rom phone info shows (android version 2.3.3 GRI40) and then after flash showing (android version 2.3.3 GRI40) ?
how can my phone be the same rom version pre & post flash with out doing nand back-up?
as that must mean I must have screwed up after flash ?
do I flash this as well ? GRJ22 system dump (boot.img/system.img):
if I do do I flash rom first or system dump first ?
as well not positive when partition SD card for A2SD+ through clockwork that it did partition sd card right way?
I am noob to use ADB and prompt commands and my micro sd slot on comp is not working
is there android app to partition SD card and or check if partition worked on sd card ?
sorry for long post
can anybody help
PS I am trying to flash this rom
[ROM] [GRJ22] N1 2.3.4 OTA ROM v5 (deodex, root, zipalign, busybox, A2SD, TBAlert
thanks in advance
danner_416 said:
Hi all,
my fist post on xda and a noob as well with my first android.
I had someone do my first root and put GEOs rom, as i wanted close to stock to learn android some more, I now want to jump on your rom. the A2SD version
so I try to partition SD card for A2SD+ through clockwork.Then download your rom. By rom manager.
before flashing rom phone info shows (android version 2.3.3 GRI40) and then after flash showing (android version 2.3.3 GRI40) ?
how can my phone be the same rom version pre & post flash with out doing nand back-up?
as that must mean I must have screwed up after flash ?
do I flash this as well ? GRJ22 system dump (boot.img/system.img):
if I do do I flash rom first or system dump first ?
as well not positive when partition SD card for A2SD+ through clockwork that it did partition sd card right way?
I am noob to use ADB and prompt commands and my micro sd slot on comp is not working
is there android app to partition SD card and or check if partition worked on sd card ?
sorry for long post
can anybody help
PS I am trying to flash this rom
[ROM] [GRJ22] N1 2.3.4 OTA ROM v5 (deodex, root, zipalign, busybox, A2SD, TBAlert
thanks in advance
Click to expand...
Click to collapse
If the custom ROM you flashed is base on the same Android version than it's still gonna be the same Android version.
What does the "MOD version" say?
You can partition SD card using CWM or Amon Ra recovery. This is not an app, it's your custom recovery. If I'm reading it right you already have CWM recovery.
baseballfanz said:
If the custom ROM you flashed is base on the same Android version than it's still gonna be the same Android version.
What does the "MOD version" say?
You can partition SD card using CWM or Amon Ra recovery. This is not an app, it's your custom recovery. If I'm reading it right you already have CWM recovery.
Click to expand...
Click to collapse
thanks fo reply baseballfanz
I am on GEOs rom Gingerbread 2.3.3 (GRI40)
and i want to flash this Gingerbread 2.3.4 [GRJ22] the App2SD one from this thread. http://forum.xda-developers.com/showpost.php?p=13430563&postcount=1
I went in to recovery to CW via rom manager and then run partition tool in
recovery, but when trying to DL a APP that needs sd card to be partitioned
it fails to run. saying sd card must be partitioned first.
so I take it CWM recovery failed to partition my sd card and I cant figer out how I my rom version stayed the same after coming out of flash ? with out having to do a droid back-up if I screwed up the flah process? afrer trying to flash a 2.3.4 rom. that is App2SD supported rom.
If you were trying to flash another ROM and it fail to flash for whatever reason, than you're still running your
current ROM. That's why when you left cwm and booted up, it just went back to whatever you had already.
Basically it never got to a point of writing anything, it did some check and found you didn't have correct partition
so it probably aborted.
Sent from my Transformer TF101 using Tapatalk
ok but status bar in recovery did its thing for around 5 minutes with no error message. So I take it CM recovery cannot partition SD card properly ?
is there away around it besides CW recovery and command promts via sdk on pc. like a APP?
or even a APP to check if CW is Partitioning sd card Properly ?
thanks for the help
ClockworkMod recovery should be able to partition your card without an issue. When doing it, it will wipe your card, so make sure everything is backed up. Pay attention to what is on the screen when you do this. It will show you any error messages that may occur. So, if you didn't see any error messages, your card should be partitioned. Same goes for when you flash. It should show you why it didn't flash (assuming it didn't).
You can use minitool partition wizard on your PC and it will preserve your data without wiping it out like Gparted/Unbutu.
To check your partitions download terminal from market or use adb and type
Su
Busybox df -h
It will show partitions fat, ext and swap sizes.
Woodrube said:
You can use minitool partition wizard on your PC and it will preserve your data without wiping it out like Gparted/Unbutu.
To check your partitions download terminal from market or use adb and type
Su
Busybox df -h
It will show partitions fat, ext and swap sizes.
Click to expand...
Click to collapse
thanks,Woodrube
I will give it a go tonight.
I had problems partitioning my SD card with CWM or rom manager... Installed Amon Ra recovery and first time I tried partitions were set
the link of the rom http://forum.xda-developers.com/showthread.php?t=2199575
after sd partition i put INT2EXT+ to the rom but when rebooting all apps are forced close
the rom have init.d can you recommend some sd partition solutions that can run in cm10 ？
hcnhcn012 said:
the link of the rom http://forum.xda-developers.com/showthread.php?t=2199575
after sd partition i put INT2EXT+ to the rom but when rebooting all apps are forced close
the rom have init.d can you recommend some sd partition solutions that can run in cm10 ？
Click to expand...
Click to collapse
If you have donea sd-ext partition correctly then. try to flash int2ext script via CWM recovery, not putting it manually.