Database Develop

Q. setting up a2sd using clockwork mod

hi, i've looked everywhere for help and i just can't understand for some reason. so i'm trying to set up DT a2sd on a gingerbread rom that supports it. so i partition my sd card using clockwork mod for 512mb ext partition. then i wipe data using clockwork mode so it wipes everything, but then when i run the rom there is no a2sd partition seen by quick system info and my memory fills up quick. this is after i have flashed a compatible rom and the latest dt a2sd zip. when i look at the sd card on my computer it shows that the ext partition i created is in fact ext4, which i think isn't compatible. so when i manually set the partition to ex3, and run a rom, the apps install onto the ext partition but they force close and i can't open any of them. and when i wipe in clockwork mod, it converts the ext3 to ext4 again. any help?? thanks

[Q] How to Partition an SD Card for galaxy mini

i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??

surendra13 said:
i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??
Click to expand...
Click to collapse
Here you go: partition sd card
Was that so hard?
Next time do your homework!!

surendra13 said:
i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??
Click to expand...
Click to collapse
try this software for partition SD Card.. use Ext2 or other on file system. MiniTool Partition Wizard Home Edition on the Web
search on CNET Download. maybe helpfully

you can search in youtube "Cách phân vùng ext2 thẻ nhớ" and follow it
or you install ClockworkMod recovery
chose Recovery => advanced => Partition SD card
if sdcard have
1G => 128mb
2G =>256mb
4g=>512mb
8g=>1G
and the partition 2 is swap
you can chose 128 or 256
reboot and check in pc
sr i can't post link ^^!

shinnobi said:
you can search in youtube "Cách phân vùng ext2 thẻ nhớ" and follow it
or you install ClockworkMod recovery
chose Recovery => advanced => Partition SD card
if sdcard have
1G => 128mb
2G =>256mb
4g=>512mb
8g=>1G
and the partition 2 is swap
you can chose 128 or 256
reboot and check in pc
sr i can't post link ^^!
Click to expand...
Click to collapse
I'm using rom TouchWiz_CM(Full TouchwizUI on CM7) , link: http://forum.xda-developers.com/showthread.php?t=1838305
Can i partition my sd card? and how to config my phone after that?

Why so snotty?
thousandecibels said:
Here you go: partition sd card
Was that so hard?
Next time do your homework!!
Click to expand...
Click to collapse
I did google it myself and the link brought me here to read your snide response. I grow weary of the attitudes from people like you on this site.

Iron_Dingo said:
I did google it myself and the link brought me here to read your snide response. I grow weary of the attitudes from people like you on this site.
Click to expand...
Click to collapse
oh boy... if this issue wasn't discussed before, he wouldn't post that... y'all really need to learn how to google properly...

odin0706 said:
I'm using rom TouchWiz_CM(Full TouchwizUI on CM7) , link: http://forum.xda-developers.com/showthread.php?t=1838305
Can i partition my sd card? and how to config my phone after that?
Click to expand...
Click to collapse
Yes,you can.After that you can use S2E or Link2SD to config SD-ext.I gess you flash New Experience rom 9.9.1,it already has S2E and very smooth.

it's strange:
I use last CWRM 6.0.2.7 for mini by dany
but when I partition SD
I get ext 3 partition
how to get an ext 4 partition?
thanks

giorss said:
it's strange:
I use last CWRM 6.0.2.7 for mini by dany
but when I partition SD
I get ext 3 partition
how to get an ext 4 partition?
thanks
Click to expand...
Click to collapse
U can use mini partition wizard to get ext4...
Sent from my GT-S5570 using xda premium

wait_close said:
U can use mini partition wizard to get ext4...
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
thanks... I tried to use it before and it creates a right ext 4 partition, but the rom (lenio rom v4) does not recognize the partition
I tried to label the partition "sd-ext" or with no label
but in both modes it does not work

incredible... I did the ext4 by minitool but the a2sd on lenio v4 does not recognize the sd-ext
update:
created ext4 by minitool partition wizard, but it seems that phone can't recognize it, coz the rom does not see the partition
is there something to do to make the phone create/see ext4 partitions?

tried the last attempt, with another CWM (5.0.2.8 touch ext)
I partitioned the SD, choosing ext4, but when I control, it's ext3
why that???

Some possible problems,
giorss said:
tried the last attempt, with another CWM (5.0.2.8 touch ext)
I partitioned the SD, choosing ext4, but when I control, it's ext3
why that???
Click to expand...
Click to collapse
maybe the CWM failed to format it with ext4 file system,
or the ROM you use failed to identify ext4 file system, some guys told me there are ROMs that don't support the ex4 yet, you may want to read your ROM specification,
or somehow the ROM need additional script to read ext4 file system properly,
recently I've tried more than 10 times partitioning my SD cards, but most of it failed in attempts,
it won't be mounted as second partition, therefore I can't use Link 2 SD properly,
My ROM is PAC 22.1.0
I've tried partition tools: Minitool, CWM 5, AParted (SDCARD Partiton Tool) app, checked the partition table with Partition Table app, trying to mount second partiton manually with Android Terminal Emulator (using "mount" command), success using CWM.
I've tried ext2, ext3, ext4 partitions, but success only with FAT32 file system,
I think in the process I've delete some media in /system partition, maybe it creates problem since Link 2 SD need to modify some files in /system partition to mount the second partition,

I tried with Lenio vQuattro, partitioning with minitool, the sd-ext was correctly partitioned as ext4, but the phone did not saw the sd-ext. The rom is done to use only ext4.
So I went back to the most recent cm 10.1 (with ext3 and int2ext+) because this is my only phone and I need it to phone

Better use mini tool partition wizard..
You can choose the type of part,like ext2 ext3 or ext4..
Sent from my C2105 using xda app-developers app

Evervolv Perdo 3.1.0final with a2sd

Hi
I try alot of roms but the best one for me is Evervolv-Perdo-3.1.0final-passion (fast, smooth, all apps work, 4.1.2v)
but i can't get a2sd work or m2sd in this rom
i install a2sd from terminal emulator (Y Y Y) but after install it , i cant install any app and keep getting "INSTALL_FAILED_INSUFFICIENT_STORAGE",
Then i try m2sd and it say the "The init.d startup script could not be copied to the system partition.".
any help ?

dev.mahmoud said:
Hi
I try alot of roms but the best one for me is Evervolv-Perdo-3.1.0final-passion (fast, smooth, all apps work, 4.1.2v)
but i can't get a2sd work or m2sd in this rom
i install a2sd from terminal emulator (Y Y Y) but after install it , i cant install any app and keep getting "INSTALL_FAILED_INSUFFICIENT_STORAGE",
Then i try m2sd and it say the "The init.d startup script could not be copied to the system partition.".
any help ?
Click to expand...
Click to collapse
Do you have an ext4 partition? It is better to have a 1 GB ext4 partition. You can create a partition using 4EXT recovery.
Sent from my Nexus One

sphinxcs898 said:
Do you have an ext4 partition? It is better to have a 1 GB ext4 partition. You can create a partition using 4EXT recovery.
Sent from my Nexus One
Click to expand...
Click to collapse
yes i have 1 2Gb ex4 partition, a2sd work with manny other rom except this one

dev.mahmoud said:
yes i have 1 2Gb ex4 partition, a2sd work with manny other rom except this one
Click to expand...
Click to collapse
Try using m2sd aroma installer

tommypacker said:
Try using m2sd aroma installer
Click to expand...
Click to collapse
aroma installer is older version of m2sd, i try the new one and it didn't work

dev.mahmoud said:
yes i have 1 2Gb ex4 partition, a2sd work with manny other rom except this one
Click to expand...
Click to collapse
Ok, Check if your partitions are aligned. Use 4EXT recovery to check for and correct partition alignments.
Secondly, use the APK or the zip file version of m2sd if you want to.

sphinxcs898 said:
Ok, Check if your partitions are aligned. Use 4EXT recovery to check for and correct partition alignments.
Secondly, use the APK or the zip file version of m2sd if you want to.
Click to expand...
Click to collapse
done check and it say is perfectly aligned.
secondly i used APK and it say "The init.d startup script could not be copied to the system partition.".
note that i install other rom and a2sd work great without any of this error

I'm also having the same problem as dev.mahmoud.
I installed the latest nightly from Evervolv from today. Busybox configured with no problem. When I try to install the script, I get: The init.d starup script could not be copied to the system partition.

Int2ext on Jelly Bean

Hi guys Do I need a special version of int2ext in order to use it with Jelly Bean rom (in particular CM 10.1)? An ext4 partition will be fine for this use? Last but not least: to install this script is needed a special procedure (like mount /system and /data in recovery)? Thank you for your help and time Have a great life, peace!

MeltingSnowman said:
Hi guys Do I need a special version of int2ext in order to use it with Jelly Bean rom (in particular CM 10.1)? An ext4 partition will be fine for this use? Last but not least: to install this script is needed a special procedure (like mount /system and /data in recovery)? Thank you for your help and time Have a great life, peace!
Click to expand...
Click to collapse
1. Int2ext scripts work in JB
2. .ext4 is the best option
3. The procedure is always the same:
First of all create you sd-ext partition using MiniTool Partition
Code:
1. Backup your current data (optional)
2. Boot into CWM/Go back to CWM menu
3. Flashing the script:
>>> mount data
>>> mount system
>>> mount sd-ext
>>> format SD-EXT (YOUR EXTERNAL PARTITION, NOT YOUR SD!)
4. Flash the script!
5. Reboot system

Viper The Ripper said:
1. Int2ext scripts work in JB
2. .ext4 is the best option
3. The procedure is always the same:
First of all create you sd-ext partition using MiniTool Partition
Code:
1. Backup your current data (optional)
2. Boot into CWM/Go back to CWM menu
3. Flashing the script:
>>> mount data
>>> mount system
>>>(mount sd-ext)
>>> format SD-EXT (YOUR EXTERNAL PARTITION, NOT YOUR SD!)
4. Flash the script!
5. Reboot system
Click to expand...
Click to collapse
Thank you so much for the fast and super-detailed answer. One thing I don't understand the reason why: the ext partition I crate in sd card with my pc is empty so why do I need to format it again with CWM?

MeltingSnowman said:
Thank you so much for the fast and super-detailed answer. One thing I don't understand the reason why: the ext partition I crate in sd card with my pc is empty so why do I need to format it again with CWM?
Click to expand...
Click to collapse
You can create your sd-ext using your pc or CWM, I advise you to use your PC (MiniTools Partition). It's safe, easy and you can choose .ext4 format
Using CWM >> Format sd-ext command will wipe your sd-ext data, so don't worry about "re-format" your sd.ext, it won't change your sd-ext's system format

The best, the safest & the easiest way to create a partition on your SD card is always via your custom recovery. You can format it to the EXT4 file system using the EXT4 conversion tool by PSDNA. Mini partition tool killed my brand new 4GB class 4 SD card.
Also nothing special for Jelly Bean as @Viper The Ripper said. It is just the same drill & yeah, cronmod scripts support all android versions & the flashing procedure always remains the same. I recommend you to use INT2EXT+.
Sent from my GT-S5830 using xda premium

Venomous Viper 119 said:
The best, the safest & the easiest way to create a partition on your SD card is always via your custom recovery. You can format it to the EXT4 file system using the EXT4 conversion tool by PSDNA. Mini partition tool killed my brand new 4GB class 4 SD card.
Also nothing special for Jelly Bean as @Viper The Ripper said. It is just the same drill & yeah, cronmod scripts support all android versions & the flashing procedure always remains the same. I recommend you to use INT2EXT+.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I created succesfully a 768mb EXT4 partition with Minitool Partition flawlessly. First I formatted the SD card with Windows. Than into Minitool Parition I deleted the whole FAT32 partition, created a new FAT32 partition set as active with 768mb unallocated. Last thing I did was allocate that 768mb as EXT4. All partition are created as primary, not logical. Also used diskinfo on android and got that 768mb working without problems. Hope my steps are good hints for you to avoid other dead SD cards

[Q] Which CWM version for ext4 fomat, for Cooper?

I am currently using CWM 5.0.2.6 as it is universally suggested the appropriate for Galaxy Cooper.
The problem is that this version can only format the sd card up to ext3, and not ext4.
I want to try the Ulimatum rom with all its goodies and I need ext4 format in partition for Swapall. My sd card is super fast class 10 u3.
I have read that in many cases 6.x.x.x versions end up in blue screens or fail to reboot.
Although I use minitool for partions, when installing a new rom at some point devs ask to format memory before installation, so even if it was originally in ext4 it reverts back to ext3 after the CWM format with the 5.0.2.6 version.
Which version I can safely use for ext4?

tommycr7 said:
I am currently using CWM 5.0.2.6 as it is universally suggested the appropriate for Galaxy Cooper.
The problem is that this version can only format the sd card up to ext3, and not ext4.
I want to try the Ulimatum rom with all its goodies and I need ext4 format in partition for Swapall. My sd card is super fast class 10 u3.
I have read that in many cases 6.x.x.x versions end up in blue screens or fail to reboot.
Although I use minitool for partions, when installing a new rom at some point devs ask to format memory before installation, so even if it was originally in ext4 it reverts back to ext3 after the CWM format with the 5.0.2.6 version.
Which I can safely use for ext4?
Click to expand...
Click to collapse
You can use the ext4 format with CWM without problems, CWM's version is NOT important, but it can't create this typ of partitions, so you need ypur PC to create an ext4 partition (Gparted, Minitool partiton magic...)
If you want to flash The Ultimatum Rom or another CM7 based ROM you must use a CWM 5.x based recovery.
Use CWM 6.x just for CM11
To use ext4 format >>> all versions are safe
To flash the Ultimatum ROM >>> CWM 5.x