[Q] Help removing AT&T Logo from startup - Captivate Q&A, Help & Troubleshooting

Sorry to open this thread, but I'd been reading some other threads and I've seen ppl asking about it, but since it's mixed with some other topic it just get forgotten.
Anyways, I've flashed my Rogers Captivate to a AT&T 2.2 firmware, but I'm having problems with Rogers itself (they keep screwing up my bills for the last 4 months, this month they were charging me CDN$855 ><). So I decided to cancel with then and go with Bell's Vibrant. The problem I'm having is that I flashed back to Rogers stock rom, but the AT&T is still there. I pre-ordered my galaxy so I have to send via mail, I can't just return to a store. So I need to remove the AT&T logo at the start up.
Any ideas on how I do that ?? I just started using Android so a step by step would be appreciated, specially because I have to return it as soon as possible, so I don't have much time to experiment

chrislawho said:
Sorry to open this thread, but I'd been reading some other threads and I've seen ppl asking about it, but since it's mixed with some other topic it just get forgotten.
Anyways, I've flashed my Rogers Captivate to a AT&T 2.2 firmware, but I'm having problems with Rogers itself (they keep screwing up my bills for the last 4 months, this month they were charging me CDN$855 ><). So I decided to cancel with then and go with Bell's Vibrant. The problem I'm having is that I flashed back to Rogers stock rom, but the AT&T is still there. I pre-ordered my galaxy so I have to send via mail, I can't just return to a store. So I need to remove the AT&T logo at the start up.
Any ideas on how I do that ?? I just started using Android so a step by step would be appreciated, specially because I have to return it as soon as possible, so I don't have much time to experiment
Click to expand...
Click to collapse
How did you flash back to stock? ODIN? clockwork from nandroid backup?

icezar1 said:
How did you flash back to stock? ODIN? clockwork from nandroid backup?
Click to expand...
Click to collapse
Used Odin.

you need to find the stock boot.bin & param.lfs
to remove the att logo.

eugene373 said:
you need to find the stock boot.bin & param.lfs
to remove the att logo.
Click to expand...
Click to collapse
Be careful though, those 2 files are the most dangerous files to play with!
However, I believe that might be fixed if you flash the stock firmware with the option "Phone Bootloader Update" ticket. Not 100% sure though.
Can someone confirm?

icezar1 said:
Be careful though, those 2 files are the most dangerous files to play with!
However, I believe that might be fixed if you flash the stock firmware with the option "Phone Bootloader Update" ticket. Not 100% sure though.
Can someone confirm?
Click to expand...
Click to collapse
You don't need that checked if you have the boot.bin in the pda..
param.lfs is where the images are contained and param.lfs is stored on stl6
the dangerous one is the boot.bin

flash with this kernel, it doesn't have the ATT logo.
http://etc.muteheadlight.net/android/I9000_reoriented_v2.1.3.tar

If someone with a Rogers Captivate who hasn't flashed AT&T firmware could dump /dev/block/stl6 it might be helpful.
Code:
dd if=/dev/block/stl6 of=/sdcard/stl6.bin

opcow said:
If someone with a Rogers Captivate who hasn't flashed AT&T firmware could dump /dev/block/stl6 it might be helpful.
Code:
dd if=/dev/block/stl6 of=/sdcard/stl6.bin
Click to expand...
Click to collapse
dd if=/dev/block/stl6 of=/sdcard/param.lfs bs=4096
Then make it into an odin ready or via redbend_ua & flash it.

dealnest said:
flash with this kernel, it doesn't have the ATT logo.
http://etc.muteheadlight.net/android/I9000_reoriented_v2.1.3.tar
Click to expand...
Click to collapse
Well.. if you wanna replace the ATT logo with the i9000 logo.. then go ahead

I would say that the i900 logo looks a billion times better than AT&T.

On a related note, it would be great if that freaking AT&T splash was replaceable with custom image.

rraquib said:
On a related note, it would be great if that freaking AT&T splash was replaceable with custom image.
Click to expand...
Click to collapse
Yeah the AT&T logo is very annoying. I just want my black i896 screen back.
Sent from my SAMSUNG-SGH-I897 using XDA App

hey guys hopefully someone has an answer. I have a att captivate running a.n. beta1 (child of Dg's aosp) with the Zimage from Cognition 2.3B2. I wanna remove the att splash screen and replace it with the android mask file found in framework-res.apk assets/images. It looks like this on the phone....http://dl.dropbox.com/u/14217261/IMG00009-20100820-2119.jpg. I just wanna remove that damn att screen even if its just black or the samsung galaxy s logo screen then bootanimation. any help would be awesome. (I dont mean to hijack this thread but didnt wanna get yelled at if i started a new thread)

that AT&T splash screen you guys are talking about is located in the param.lfs file that is flashed with ODIN, stored in one of the bml blocks and viewable in /.lfs in the root of the phone.
As has been shown with the Samsung Moment, this file can be flashed and replaced, but is a terrible idea. For them, replacing that file required it be under 100 KB and would lead to a brick (that is unrecoverable if I listened to noobnl correctly).
basically, it's at worst a minor annoyance and not worth the potential damage in my opinion.

I have a backup from ROM manager when I had stock firmware (rooted). Let me know if I could pull out some info from that!

Thanx for the help guys.
Well I guess the I9000 logo isn't as annoying as the AT&T. If I can't solve the problem and my return is refused, I guess i'd prefer the I9000 logo lol
I'll try to flash to that tomorrow.
iswapnil90 said:
I have a backup from ROM manager when I had stock firmware (rooted). Let me know if I could pull out some info from that!
Click to expand...
Click to collapse
Do you think it's possible to upload the ROM you have from rogers ??
Another I noticed is that now my GPS is screwed up. I was able to get a perfect lock with the rogers rom. No I'm about 1 block north and 1 east away. For basic stuff that wouldn't bother me, but if I could fix that... I tried the *#*#1472365#*#* thingie but nothing really happened. I mean, when I first start google maps I get the perfect location, but after the map loads I warp someplace else lol.

Related

[Q] 1 Click Odin Stock ROM 2.1 AT&T?

I am newbie to Android. So, please bear with my questions below. I used to own an iphone before, and when you reloaded the OS that you get from Apple you know it is the original.With Android it is little different.
I rooted my captivate and now I need to return it to AT&T. Need to load the original ROM.
I did download Odin 1 Click for android 2.1 AT&T Stock ROM? How do I know that it is the actual ROM AT&T/Samsung had put on the Captivate?
There are so many ROMS everybody is putting it out there...just wanted to be sure. I know AT&T or Samsung just don't give out the ROM.
If I have posted this in the wrong forum, please let me know.
Thanks
There is a question and answer section for these posts and it is the stock rom, that's what the thread says. Just read how to use and watch the videos if you're having trouble.
If it says stock it *should* be stock. And since it's Odin one click to stock you should be safe.
Sent from my Captivate
Look up your build number. If 1010 our higher jf6 iud not such and I would avoid odin one click
Is under battery
It is 1008.
But how do you get the Android 2.1 Stock ROM ?? AT&T or Samsung don't give it out. Am I missing something here.
As I said earlier for iphone you could the get ios file from Apple.
Odin injects the stock rom back into your phone
you need to be in down load mode
Open odin
Pull bat, sim, and ext sd
Put bat back in
Hold volume up and down
While holding plug usb
Should have android with shovel on screen.
A box in odin should turn yellow
Click start, watch the magic
Correct odin. Stock for the captivate is jf6
http://www.fileserve.com/file/emnCn2j
But how do you get the Android 2.1 Stock ROM ?? AT&T or Samsung don't give it out.
I am asking once again the same question as nobody is really answering to the question.Sorry about that.
Android is open source. All official software releases are out there.
What are you looking to do, you are not being clear
All I wanted to make sure is that I get the CORRECT ROM to put it back on my Captivate before I return it to AT&T.
Thanks
hmm so when you are told that the odin one click program flashes jf6 stock software (includes all at&t bloat ware) you continue to ask the same question. Good luck
I believe the stock 2.1 rom is embedded inside Odin so when you flash it returns to stock. There is no need to search for the stock 2.1 rom.
please correct me if Im wrong...I'm learning too..
Read the odin thread. Please if you have questions, post in q&a.
climo said:
I believe the stock 2.1 rom is embedded inside Odin so when you flash it returns to stock. There is no need to search for the stock 2.1 rom.
please correct me if Im wrong...I'm learning too..
Click to expand...
Click to collapse
This is correct. I HIGHLY advise you to search for Connexions "how to" videos. It shows you how to use odin to return to stock. So easy, a caveman could do it.
Look here:http://forum.xda-developers.com/showthread.php?t=731989
However, I have to ask the OP this: you mentioned that you rooted your phone, but did you flash to a different ROM? If you didn't flash to a different ROM, all you have to do is to unroot your phone and you're set to go.
LOL I think what the OP is trying to ask is this:
How do we know that Odin is using the correct, stock ROM directly from Samsung/ATT, so that when he flashes the phone with Odin and sends it back to AT&T, they don't tell him hes got the wrong software on it and void the warranty.
Unknownghost00 said:
LOL I think what the OP is trying to ask is this:
How do we know that Odin is using the correct, stock ROM directly from Samsung/ATT, so that when he flashes the phone with Odin and sends it back to AT&T, they don't tell him hes got the wrong software on it and void the warranty.
Click to expand...
Click to collapse
3 minutes of searching would have answered all his questions though.
cdi_h said:
But how do you get the Android 2.1 Stock ROM ?? AT&T or Samsung don't give it out.
I am asking once again the same question as nobody is really answering to the question.Sorry about that.
Click to expand...
Click to collapse
I'm so happy that you found it necessary to flame the thread for an answer.
Relax man.
It's natural to be concerned about voiding the warranty. Nobody wants to shell out $$ for a new phone, right? The bottom line is this, numerous people on this forum have done far worse than rooting their phone and have returned it successfully for a replacement (like bricking it). So take a deep breath, and follow some of the good advice given already to either:
A) unroot your phone (look around you'll find how)
B) flash the stock ROM that's out there in numerous locations
then send the sucker back.
But a bit of logic will show that the 3 minutes gave you the WRONG answer.
IF the Odin program had the stock rom we would not have had issues like loss of 3 button recovery on some phones after using Odin. We also would not have 2 versions of Odin. (1 specifically to address the 3 button recovery issue). You also would still be able to perform an OTA update after using Odin, which once again, most if not all the Odin flashed phones are incapable of.
Odin MIGHT have A stock Rom, in which case Samsung/ATT are using more than one, but it does not have THE stock ROM.
Now if the concern is just to get it close enough to return the phone, the guys at the exchange desk don't know enough about the phone to tell the difference.
axis01 said:
3 minutes of searching would have answered all his questions though.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] VZW Tab - Flashed Roto/JMI, have no modem

I have successfully installed the Roto/JMI v2 Rom on my Verizon Galaxy Tab.
It seems to work, but somehow I lost my modem. Where can I find the CSC/Phone firmware to reflash using Heimdall?
golden422 said:
I have successfully installed the Roto/JMI v2 Rom on my Verizon Galaxy Tab.
It seems to work, but somehow I lost my modem. Where can I find the CSC/Phone firmware to reflash using Heimdall?
Click to expand...
Click to collapse
did you roto back first before anything?
Here is the modem.bin file extracted from my Verizon GTab. It worked to fix my modem when I mistakenly placed the zImage file in modem slot for Heimdall.
Used 7z to compress. Just uncompress and use Heimdall to update.
Let me know if this works for you...
when I use that modem.bin, heimdall with go to install it then sit at 100% but doesn't actually install it. It locks up, when I restart I get the phone exclamation mark computer error picture.
kgelso said:
when I use that modem.bin, heimdall with go to install it then sit at 100% but doesn't actually install it. It locks up, when I restart I get the phone exclamation mark computer error picture.
Click to expand...
Click to collapse
Hmm, that shouldn't happen. How long did you wait? Heimdall will wait quite some time (sometimes 5 minutes or more) for the phone to respond. If the phone doesn't respond in this time then you should see an error message.
Anyway if the modem flash did actually make it to 100% then you should be able to use the command line tool directly to just get rid of the phone exclamation screen:
heimdall close-pc-screen
Click to expand...
Click to collapse
Thanks for your response. I ended up re-flashing the Stock Firmware, and it worked.
I appreciate your help.
golden422 said:
Thanks for your response. I ended up re-flashing the Stock Firmware, and it worked.
I appreciate your help.
Click to expand...
Click to collapse
Golden422 - How did you do this, what files did you use?
I have the exact same problem you were having, no luck for me.
I still stuck on airplane mode with no GPS.
If it means anything, under "About device" I have unknown Baseband and Hardware versions.
Thanks in advance.
Needed modem for Verizon Galaxy Tab
Please, help me found modem for Verizon Galaxy Tab (I800).
Yesterday I'm flashed over Odin Sprint modem (EA24), and now my Verizon Galaxy Tab dont work with mobile network.
May be anyone have some ideas for fix it another way?
P.S. Modem that attached in post #3 not fix my problem
licbez said:
Please, help me found modem for Verizon Galaxy Tab (I800).
Yesterday I'm flashed over Odin Sprint modem (EA24), and now my Verizon Galaxy Tab dont work with mobile network.
May be anyone have some ideas for fix it another way?
P.S. Modem that attached in post #3 not fix my problem
Click to expand...
Click to collapse
Same. I have no 3G network. I am also stuck at the 100% loading screen. Help would be awesome.
You guys should check out the Gingerbread leak for VZW that Oldmacnut posted in the development section. It's a full stock GB rom. Otherwise I'd recommend his Better Than Life rom. The stock GB should get you back up and running, then you can figure out what you want to do from there. There's also a stock Froyo rom floating around here for the VZW tabs as well. The Sprint rom breaks the VZW tab's 3g, known issue. You always want to try and get the stock rom for your specific tab.
The Sprint install breaks my modem? How unfortunate. Anyway how do I put a band-aid on it to fix it? Lol
Hope I don't have to send it back to get it fixed...
Sent from my SCH-I800 using XDA App
pvtjoker42 said:
You guys should check out the Gingerbread leak for VZW that Oldmacnut posted in the development section. It's a full stock GB rom. Otherwise I'd recommend his Better Than Life rom. The stock GB should get you back up and running, then you can figure out what you want to do from there. There's also a stock Froyo rom floating around here for the VZW tabs as well. The Sprint rom breaks the VZW tab's 3g, known issue. You always want to try and get the stock rom for your specific tab.
Click to expand...
Click to collapse
Oldmacnut is my hero! Love the GB release too.

[Q] Massive SGS Problem

Hey All, sorry if its and easy problem or if its been posted heaps before i have been searching and tried everything to no avail so here i am putting it to all u xda members to help me with all your wisdom. See i have had my galaxy for a few months and thought hey time to play with the pre release of 2.3.3 before it was officially released well now im buggered lol i cant wipe, i cant factory reset i flash another firmware and it all goes fine it reverts back but all my apps and settings and accounts are still there and when i delete my apps and restart there all back again! i install new apps and they delete on restart... frustrating...i cant put any update.zip onto my internal as it deletes it straight away and installing from external SD dosent seem to work, i tried a few posts like this one as suggested by JJEgan else where to no avail either (http://forum.xda-developers.com/showthread.php?t=818556) id love to be able to use my SGS again as i bought a windows phone 7 as a replacement and i dont like it lol SAVE MY ANDROID AND MY SANITY PLEASE!!!!!
Is it an international I9000? Or the I9000B? It seems to me as though your sdcard might be corrupt... Wipe your Dalvik cache. Did you try flashing a DBDATA containing firmware onto your phone, using ODIN? If not, flash XXJPU (Froyo) and see if that helps...
well its a telstra GT I9000T the 2.3.3 firmware i have is the only one i can seem to find with the 3 files lol i try to wipe dalvik it says it completes but nothing changes at all do u know anwhere i can get 3 file firmwares from as samfirmware.com only has 1 file flashes cheers for the help!
Prankzter said:
well its a telstra GT I9000T the 2.3.3 firmware i have is the only one i can seem to find with the 3 files lol i try to wipe dalvik it says it completes but nothing changes at all do u know anwhere i can get 3 file firmwares from as samfirmware.com only has 1 file flashes cheers for the help!
Click to expand...
Click to collapse
Look around for a I9000T firmware that contains DBDATA. It should hopefully fix what you're experiencing... Personally, mine's an I9000 so I have no idea about your firmwares... But you can search this forum..
Prasad007 said:
Look around for a I9000T firmware that contains DBDATA. It should hopefully fix what you're experiencing... Personally, mine's an I9000 so I have no idea about your firmwares... But you can search this forum..
Click to expand...
Click to collapse
thanks for the help mate ill google around
Prankzter said:
thanks for the help mate ill google around
Click to expand...
Click to collapse
You're welcome.
nah no good for some reason recovery wont even change back from 3e i flashed my original firmware and it changed to 2e i reset to flash to 2.2.1 as u suggested and its back at 3e so who knows...may have to reflash to original and take it back to telstra unless u have any other ideas
Prankzter said:
nah no good for some reason recovery wont even change back from 3e i flashed my original firmware and it changed to 2e i reset to flash to 2.2.1 as u suggested and its back at 3e so who knows...may have to reflash to original and take it back to telstra unless u have any other ideas
Click to expand...
Click to collapse
If you have warranty, you should flash the stock firmware for your phone and take it in for repairs... Honestly, can't think of anything else... Unless there's more input from others here on the forum with your model.
Prasad007 said:
If you have warranty, you should flash the stock firmware for your phone and take it in for repairs... Honestly, can't think of anything else... Unless there's more input from others here on the forum with your model.
Click to expand...
Click to collapse
yeh looks like its time to return it...maybe i can get a sgsII lol i cant even repartition the damn thing...on a side note all my other flash based things like my camera and usb dongles and sd cards are all doing the same as in restoreing everything on reboot or unplug...wierd

Rogers tab 7" convert to phone questions

hi all
i picked up a used rogers galaxy tab 7".upgraded to 2.3.3 official via kies.
GT-P1000R
rooted it.
unlocked it.
now i wish to use the phone capabilities and have a few questions.
i see in a couple posts that you no longer have to flash a complete rom,just a modem.
is that info correct?
i see that the jm2 modem seems to work best with the rogers tab,so do i just flash the modem with odin and that gives me the voice capability.
or do i need to flash a complete rom(European)?
also there is no dialer program so where do i get that at?or does it come with the modem flash.
is there a better modem than jm2 for the rogers tab?or the bell i9000 modem?
i am in canada
thanks,jeff
kbg1 said:
hi all
i picked up a used rogers galaxy tab 7".upgraded to 2.3.3 official via kies.
GT-P1000R
rooted it.
unlocked it.
now i wish to use the phone capabilities and have a few questions.
i see in a couple posts that you no longer have to flash a complete rom,just a modem.
is that info correct?
i see that the jm2 modem seems to work best with the rogers tab,so do i just flash the modem with odin and that gives me the voice capability.
or do i need to flash a complete rom(European)?
also there is no dialer program so where do i get that at?or does it come with the modem flash.
is there a better modem than jm2 for the rogers tab?or the bell i9000 modem?
i am in canada
thanks,jeff
Click to expand...
Click to collapse
you need a euro based rom (official or custom) and bell i9000 modem.
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
kbg1 said:
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
Click to expand...
Click to collapse
that i don't know, 'cos i am on 2.3.5 with af974's ROM since day 1
kbg1 said:
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
Click to expand...
Click to collapse
Careful what you flash though, if it's from XDA any ROM should do you okay but Samsung official ROMs may contain locked boot loaders. Catch up on some reading before doing anything.
Also i suggest that you do a complete backup of your tab before flashing anything else so that you could revert back in case of issues. Stock ROGERS firmware is hard to find. And if you do a backup I wouldn't mind a copy of it as long as you keep your personal information out. As a matter of fact, what i am after is a un-rooted fully stock ROGERS ROM. As i have deleted my original backup, and would like to revert completely back to stock, I would be very thankfull if you could help. But none the less you should do a complete backup, something like the roto or nandroid backups.
Try the OVERCOME rom, it's a great place to start as a noob to flashing, they have very detailed tutorials and the ROM is good.
EDIT: And the OVERCOME rom does work with the bell i9000 modem just fine for phone calls. Although the volume on the tab is not the greatest for a speakerphone.
theREDlegion said:
Careful what you flash though, if it's from XDA any ROM should do you okay but Samsung official ROMs may contain locked boot loaders. Catch up on some reading before doing anything.
Also i suggest that you do a complete backup of your tab before flashing anything else so that you could revert back in case of issues. Stock ROGERS firmware is hard to find. And if you do a backup I wouldn't mind a copy of it as long as you keep your personal information out. As a matter of fact, what i am after is a un-rooted fully stock ROGERS ROM. As i have deleted my original backup, and would like to revert completely back to stock, I would be very thankfull if you could help. But none the less you should do a complete backup, something like the roto or nandroid backups.
Try the OVERCOME rom, it's a great place to start as a noob to flashing, they have very detailed tutorials and the ROM is good.
EDIT: And the OVERCOME rom does work with the bell i9000 modem just fine for phone calls. Although the volume on the tab is not the greatest for a speakerphone.
Click to expand...
Click to collapse
darned,i rooted and unlocked it earlier this week.
i definitely would have done a stock backup for you.
can i unroot?i used oden and one of the cf rooting images.
unlocked using galaxy s unlock from market.
can i even revert back to stock?if so i will do a backup.
i have done nothing else to the stock rogers 2.3.3
i searched my hardrive but kies must delete the firmware after flashing.
jeff
kbg1 said:
darned,i rooted and unlocked it earlier this week.
i definitely would have done a stock backup for you.
can i unroot?i used oden and one of the cf rooting images.
unlocked using galaxy s unlock from market.
can i even revert back to stock?if so i will do a backup.
i have done nothing else to the stock rogers 2.3.3
i searched my hardrive but kies must delete the firmware after flashing.
jeff
Click to expand...
Click to collapse
Thanks for the offer. But no need to go through all of that unless you can un root with something like super one click (fast and easy, but I don't think that will work for you). If your tab is still under warranty you might want to learn how to root and unroot and restock and such (its all covered in the forums). Otherwise I don't want you playing with your tab and have a "bad" flash trying to help me out. Do read up in the dev section before you start flashing custom ROMs.
That said if you do feel comfortable flashing and decide to make a backup for yourself I definitely wouldn't mind a copy.
RED
hi
not scared of bricking the tab,i have been flashing samsungs for the last couple years,captivates etc.my last tab i did a supposed gps fix which ended in a bootloop.
i managed to get it back but with a modified 2.2 firmware.then kies would not let me upgrade to 2.3.3(unofficial firmware error)
my problems have always been actually returning to stock.
in recovery i have the orange clockwork recovery that has an option to do factory reset.will this take me back to unrooted and unlocked???
if so consider it done.
i will need direction to do a full backup after that.
jeff
Doing a hard reset will NOT un-root or re-lock your device (as far as I know). The factory reset will clear the data and cache and should not touch the system. You have to un-root your device using the method you rooted it with or something along those lines.
As far as a backup is concerned, creating a system backup has been covered in the forums before. There is plenty of detailed instructions on performing a backuphave a look at the Roto Backup method.
Just picked up a galaxy tab ( rogers )
gt-p1000r
firmware 2.2
all stock
no root
no unlock
I would like to "give back" something
for all the HELLp you guys have given via these forums
( i swear all my grey hair started once i dumped my blackberry and went samsung and found this site! )
Anyway
If you are still looking for the a copy of the STOCK system before I start to play...
I will try to figure out how to make a copy for you

[Q] Flash to stock bootloader from GT-I9000

I've used Serendipity 7, and a few other ROMS prior to that, such as Cognition etc. Somehow I ended up with GT-I9000 bootloader I think. I have to flash everything back to stock for ATT warranty exchange. When I first turn the phone on, it shows black i9000 galaxy S screen, than goes to ATT white world phone screen, than animations for att 3G and animation for a glowing S. Before it would show Black GT-I9000 and then, Serendipity7 logo. But I just flashed http://forum.xda-developers.com/showthread.php?t=1145149 thinking this stock exe will revert the bootloader as well.
My questions are how do I get rid of black I9000 screen upon boot up in favor of whatever att image is supposed to be there.
Also that stock ROM I flashed, is it stock ATT 2.3.3? Kernel version shows 2.6.35.7-I897UCKF1-CL273832 Build number GINGERBREAD.UCKF1 Model number SAMSUNG-SGH-I897 Baseband I897UCKF1 Firmware 2.3.3 I am just not sure about kernel version.
Also, I have another Cappy with Serendipity 7 and GT-I9000 black screen upon startup, which I assume is a bootloader... again. This here http://forum.xda-developers.com/showthread.php?t=1367586 says
So it seems like everyone who started experiencing charge death on BUILD 15 are running I9000 bootloaders. BUILD 15 includes kernel changes which fixes stuff for Captivate users (with Captivate bootloaders), so I hereby declare that I9000 bootloaders are unsupported and unrecommended.
Click to expand...
Click to collapse
So how do I flash ICS on it now? Need to get rid of that bootloader.
First of all, that stock ROM you posted clearly states "No bootloaders" in the title. You need to find a stock ROM that has bootloaders. Find one in this thread. Regarding the THS ICS, i9000 boots were never proven to actually be the source of the problem, as people with regular bootloaders were encountering the same issues. However, they still aren't recommended since any issues with them won't be addressed.
flash the captivate gingerbread bootloaders and captivate gingerbread stock KK4.
done.
you dont need to be on the stock you got the phone with. just an official ATT stock. KK4 gingerbread with kk4 gingerbread bootloaders is just fine.
for your second phone... any captivate / i9000 bootloader works for ICS.. what do you mean by it boots to blank screen? does it turn on at all? or is it only blank for a few seconds? how do you not know what you flashed on it?
TRusselo said:
flash the captivate gingerbread bootloaders and captivate gingerbread stock KK4.
done.
you dont need to be on the stock you got the phone with. just an official ATT stock. KK4 gingerbread with kk4 gingerbread bootloaders is just fine.
for your second phone... any captivate / i9000 bootloader works for ICS.. what do you mean by it boots to blank screen? does it turn on at all? or is it only blank for a few seconds? how do you not know what you flashed on it?
Click to expand...
Click to collapse
They are talking about the GT-i9000 splash screen that has a black background
oh right the ATT boot is white... my rogers captivate is black..
once again... gingerbread bootloaders for kk4. work with everything,
Ok ! thx guys, will search!
go search yourself?? wow now that is the right attitude!
just for that...
here...
heimdall one click kk4 : http://forum.xda-developers.com/showthread.php?t=1386924
odin kk4 package : http://forum.xda-developers.com/showthread.php?t=1357848&highlight=stock+kk4
password : sampro.pl
for anyone that searches - http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 this is what I used to go back to stock everything.
TRusselo said:
go search yourself?? wow now that is the right attitude!
just for that...
here...
heimdall one click kk4 : http://forum.xda-developers.com/showthread.php?t=1386924
odin kk4 package : http://forum.xda-developers.com/showthread.php?t=1357848&highlight=stock+kk4
password : sampro.pl
Click to expand...
Click to collapse
LOL!! I was ahead of you I guess
Speaking of search, is anyone's search function missing, or is it just me?
sthodupunuri said:
Speaking of search, is anyone's search function missing, or is it just me?
Click to expand...
Click to collapse
Yes, a bunch of stuff is screwed up. Admins are saying that it's being worked on. But it's been like 48 hours already
sthodupunuri said:
Speaking of search, is anyone's search function missing, or is it just me?
Click to expand...
Click to collapse
Search function is down right now just saw it I'm the announcements
how to flash stock flash screen...please help!!!
guys i flashed 'GOOGLE nexus s' splah screen on my galaxy s gt i9000....by flashing some pda file by odin.....now when i restart my phone 'GOOGLE' comes written instead of 'GT I9000' black screen....how can i go back to my gt i9000 splash screen..... please help....and sorry for my bad english

Categories

Resources