[Q] Digitizer (Touchscreen) Repair - Hero CDMA Q&A, Help & Troubleshooting

So I shattered my digitizer last night and a friend had an old Hero that I could take the digitizer out of. I was able to replace without a hitch but now I am having a strange issue. I cannot pull the top notification bar down. It recognizes screen touches. I can scroll and select icons on my homescreens but for some reason it isnt recognizing the top notification bar. If anyone knows what the issue may be, I would appreciate the response.

kbizzle said:
So I shattered my digitizer last night and a friend had an old Hero that I could take the digitizer out of. I was able to replace without a hitch but now I am having a strange issue. I cannot pull the top notification bar down. It recognizes screen touches. I can scroll and select icons on my homescreens but for some reason it isnt recognizing the top notification bar. If anyone knows what the issue may be, I would appreciate the response.
Click to expand...
Click to collapse
Did you replace the flex cable too? And did you make sure it's plugged in all the way?

The cable is attached to the digitizer. I havent opened my phone back up to check if it is connected all the way. Figured it wouldnt work if it wasnt in all the way. I will check and see. I was wondering if it might be a rom issue. Ill try reflashing a different rom and see what happens.

Related

White Screen but Boot ok

Hi!
I just replaced the screen on a wizard because the old one got smashed.
Anyway, I connected it up, re-assembled everything, and turned it on. The screen stays solid white, and then goes dim once its presumably finished booting.
The weird thing is, I can still use the touch-screen because if I click at the top left, I can hear the menu drop down, and can select items from it!
Any ideas what I've done wrong, if anything?
Ive triple checked all the connections and it all seems okay!
Help!
Thanks
two suggestions, that might aid diagnosis, feel free to shoot them down in flames.
Have you connected the device using pocket pc controller or similar software application?
Have you tried hard reset?
Do keep us updated.
Smithjw said:
because the old one got smashed.
Click to expand...
Click to collapse
lol.. i like the way you said that...
answer
I had a simular problem replaceing my screen. I know you will say it looks right but it isnt. the ribbon cable that the lcd fits into isnt properly seated the tabs that stick out on the sides of the ribbon cable need to be fitted all the way up against the fitting the tabs on your arnt pushed in resultin in a volatge connection but no video.

Run-over Tilt repaired LCD scree but still not working properly...

Hello all.
So, long story as short as possible:
My Tilt got run over, LCD screen was busted but I could still make and receive calls by sliding it open, hitting the call button and using the keyboard to dial and 'enter' to connect.
I was also still able to connect to the phone via bluetooth from my mac, as well as syncing it on my PC partition.
Eventually, I think I hit too many random buttons and turned the phone off or something as I could no longer get it to dial out this way. I was always getting the flashing green and blue lights though.
After some research (and un-won auctions on eBay) I decided to see if popping in a new LCD screen would fix my situation.
I installed the new LCD last night, and the machine is almost back to living, however, I now have the current problems:
When the phone boots into 'normal' mode, the screen is display is very truncated. It doesn't display the full HTC updated today screen and won't respond to touch. It says 'no service' but wi-fi seems to connect. If I slide it open, the keyboard lights up but doesn't respond, neither do the front keys. Also, I get only a solid orange light in the upper left LED.
If I boot the phone into 'Safe Mode' it responds to touch, connects to the AT&T network, connects to Wi-Fi, etc. The front keys still do not do anything, and when I slide it open the keyboard does not light up or respond. Also, I get both the green light in the upper right and blue in the upper left.
Another thing, when I slide the phone open and closed there's a slight ripple in the middle of the phone like something is 'pressing' on it from the back.
Sorry for the novel. Any help is appreciated. I'm considering 'clearing storage' and returning it to factory settings or flashing the ROM. I've taken it apart and put it together like four times now, checking, double checking and triple checking connections.
Thanks!
Sounds like one of the headers isnt fully seated in the display region. IIRC there are two that I had to deal with with my 10min LCD swap routine
Yeah, I think you're basically describing symptoms of having put the phone back together wrong except that it's interesting it responds in this 'Safe Mode' and interesting that it would happen after four retries
It's probably going to need a hard reset then! You might want to check nothing has been bent, warped mountings/plastic could be the cause of the screen ripple issue.
Were there any active components on the touch film for the display? (Assuming you have replaced that too with the LCD, or that they're one whole unit) if that is the case, they may be different, newer revisions? Really grasping at straws there though; at the end of the day, the poor phone has been mauled by a wheel... best of luck!!
Thanks for the thoughts! I guess I could try and break it down again. As far as I could tell, everything looked like the phone in the disassembly directions; nothing appeared unduly bent or mangled.
"Sounds like one of the headers isnt fully seated in the display region."
I'll google it, but what 'headers' are we talking about? The small metal bits that seem to touch the upper outside edge of the LCD screen?
Would an improperly seated header cause the other symptoms? Unresponsive other buttons (keyboard, front keys) and connectivity issues with the network?
"Were there any active components on the touch film for the display?"
I got a new LCD and digitizer (is that what you mean by other active components?).
Thanks again!!
AtillaDNun said:
Thanks for the thoughts! I guess I could try and break it down again. As far as I could tell, everything looked like the phone in the disassembly directions; nothing appeared unduly bent or mangled.
"Sounds like one of the headers isnt fully seated in the display region."
I'll google it, but what 'headers' are we talking about? The small metal bits that seem to touch the upper outside edge of the LCD screen?
Would an improperly seated header cause the other symptoms? Unresponsive other buttons (keyboard, front keys) and connectivity issues with the network?
"Were there any active components on the touch film for the display?"
I got a new LCD and digitizer (is that what you mean by other active components?).
Thanks again!!
Click to expand...
Click to collapse
Any cable that attaches to the circuit boards, re-seat every one you can find. One faulty connection can cause a lot of problems. I have a similar problem with a button on my PSP but im to lazy to fix it.

ATT Tilt: Changed broken screen, now touch doesnt work

Hello, I am a true noob so please forgive me if I sound dumb.
I had a broken screen so I bought a new one on Ebay. I changed it perfectly, it looks good but now when I touch the screen it acts like I touched the top left corner (in portrait)no matter where on the screen I touch (so it opens up the "Start" menu). In landscape it acts like I touched the top right so it opens up the drop down menu with all the running programs.
I would really appreciate some help. I try re-aligning the touch screen but it does not recognize any touches at all. I have to soft reset the phone to get out of the re-align program.
I don't want to hard reset because I have read many cases where the phone gets stuck in align program as it is trying to setup and they have to install remote access or something to get around it.
I would like advise on whether it is the new screen or the phone. Is there something I can check for inside or should I send the screen back for a replacement.
Thank you for your help.
Having replaced the touch screen in a Palm with success, I would say that...
You either have a problem with the connector for the screen, recheck the connection
Someone sold you a bad screen.
Something else is wrong with the device.
At this point I don't know that in your position I wouldn't do a hard reset. What is the worst thing that can happen? The device is already broken in it's current state.
Good luck.
Thank you
Thank you very much for your help. I will try the connector. if it does not look damaged then I will return the screen.
Did you replace just the screen itself, or the screen and the digitizer? More than likely your digitizer is broken aswell. If you replaced them as a set, request a new one from wherever you got it, and if you just replaced the LCD, then you need to buy a digitizer aswell.
ashasaur said:
Did you replace just the screen itself, or the screen and the digitizer? More than likely your digitizer is broken aswell. If you replaced them as a set, request a new one from wherever you got it, and if you just replaced the LCD, then you need to buy a digitizer aswell.
Click to expand...
Click to collapse
Well, I only received the screen. I cant figure out where the digitizer is on the tilt so I don't know if I changed it or not. Does any body have any picture??
I think I read somewhere that it all comes as one piece(the screen and digitizer), but I can't confirm it.
Indeed they most of the time do come as one peice, so if your connection is good on the mobo, then I would say that the digitizer you recieved is bad. The digitzier is the super thin peice of glass that covers the LCD screen.

[Q] Replaced Screen - Dead Spots

Hi
The other day I replaced my HTC HD7 screen, both the LCD and Digitizer.
The cracked screen was working fine, and everything was working perfectly.
After changing the screens everything also came up good, the phone booted up and the Windows Phone menu was working fine.
Problem(s):
On the top right corner there is a dead spot about 1cmX4cm going downwards, I can see everything in the corner but it does not detect touch.
Also, the onscreen key board only works on left side landscape mode. When I am in portrait mode I cant use the "O" and the "P" , and when I am in Right side landscape I can't use the "G" icon/key.
This leads me to believe that the digitizer might be faulty, because the LCD shows everything so it can't be that. Or, maybe the ribbon cable might be bad?
Has anyone else had this problem? What can be done?
Any input on this problem will be much appreciated.
sent it back for replacement if it's under warranty.
Sent
Ttblondey said:
sent it back for replacement if it's under warranty.
Click to expand...
Click to collapse
Yes, I sent it back, waiting for the replacement now.
Hopefully it will work. I will update the status once I receive the new screen.

S pen problem

Hey guys I have a question. I recently changed the screen on my note 4 to a new non cracked one. Now I tried the screen with the s pen before I took the phone apart so I knew it worked. Well once I got the phone all back together the s pen on the new screen doesn't work anymore. What would control the s pen in the phone hardware wise that would make it stop working? I tried all the software troubleshooting ideas other than reloading the rom. Anybody have any ideas?
Probably the s pen ribbon cable not connected properly. I had the same issue when I personally repaired my n4. Realized it after the same issues u have and had to separate the lcd from the frame to easily connect both ribbon cables the same time.
Thanks. I'll check it out.
Did you manage to fix it? I have same problem. I got mine fixed at a phone repair shop. When I remove the s pen, the air command pops out but when I touch the screen, nothing happens.
svtthis said:
Thanks. I'll check it out.
Click to expand...
Click to collapse
Screen has brown copper screen behind it, if you break that your spen wont work, also spen connector is pain is behind to put it back if you open the screen from back not from front, make sure its fully in use flash light to see

Categories

Resources