Database Develop

[Q] Help me,please

I updated my galaxy with KIES,and after restarting my phone go to logo SAMSUNG and vibrate every minut.And then is dark screen.
I can`t go into recovery or download mode.
What can i do?

First of all you could have it posted in QnA
Second, use search.
And third -> Go to recovery mode (vol+ + home + power)
do hard reset and wipe cache.
Report if it helps
Of course you will lose ur settings, accounts...
Maybe try first wipe-cache only.

I think you didn`t read my post carefully, I wrote that I can not get into recovery mode.

srecko76 said:
I think you didn`t read my post carefully, I wrote that I can not get into recovery mode.
Click to expand...
Click to collapse
why not just simply pull your battery, and enter recover mode again?

srecko76 said:
I think you didn`t read my post carefully, I wrote that I can not get into recovery mode.
Click to expand...
Click to collapse
3-Button-Combo Bug? Why you haven't fixed it before flashing another firmware?
You've bricked your Phone.

U have usb debugging on? If yes try 'adb reboot recovery'
If no download mode, no recovery... Samsung only can help.

Hey guys,
I posted in a thread in Q&A.
hatdrawn said:
I just want to be clear ...
So I last night I flashed JPK, PDA/MODEM/CSC with 512pit installed latest oneclick lag fix 2.1.1, SGS tools and other basic apps. Was running perfect all night except that RAM seemed to be eaten up easily.
Then this morning Advanced Task Killer Froyo Beta started acting up. So I tried a reboot and then I got this black screen issue.
Tried reflashing JPK again. Just successfully flashed JH2 but still the black screen.
Recovery/Download mode work. With 2.2 recovery mode I was getting SDCARD connect errors on screen, but since JH2 I don't see them. Tried wiping cache partition, and factory reset. Still black screen. I've tried without external SD and SIM and just recently with external SD.
In this JH2 recovery mode "update media, finished" and Apllyting MultiCSC works properly too. When in recovery mode, Kies tries to recognize it, but boot/blackscreen I get nothing.
Is there anything else I can try? I have read through this whole thread, but it's a lot to read and understand. Anything with ADB? When in recovery mode ADB shell returns a device not found
Click to expand...
Click to collapse
Just wondering if you could help out please? Not getting an responses there.

hatdrawn said:
Hey guys,
I posted in a thread in Q&A.
Just wondering if you could help out please? Not getting an responses there.
Click to expand...
Click to collapse
- Reflash with Odin
- Do a Factory reset

I've done that with JPK and JH2 to no prevail

xan said:
U have usb debugging on? If yes try 'adb reboot recovery'
If no download mode, no recovery... Samsung only can help.
Click to expand...
Click to collapse
Please tell me,how can i do that.

hatdrawn said:
Hey guys,
I posted in a thread in Q&A.
Just wondering if you could help out please? Not getting an responses there.
Click to expand...
Click to collapse
can you go as past the boot screen?
are you able to issue commands?

I can't get past the boot screen on either FW

there was a topic in the Dev forum with some people that were able to successfully come back to 2.1 after flashing 2.2
but i don't remember the tittle of the topic
they originally had the same problem you have reported
if you can find it, then you'll be able to use the same methods they used to come back to a funtional 2.1

I've looked. I tried going to 2.1 but it's the same issue.
New thin though. I now have a image frozen on screen of a box with an arrow coming out of it and the android standing next to it.
What does that mean?

How you get there?

srecko76 said:
How you get there?
Click to expand...
Click to collapse
You can't get to USB Debugging unless your phone is working.
It's my issue too, but I at least have the 3 button combo.

If you got debugging mode turned on in settings:
On a PC download android sdk, open command window in tools directory...
type "adb reboot recovery"
But I dont think it may help at all, its just to make u step forward
If you dont have debugging mode turned on in settings:
Only samsung.

[Q] Green Screen Of Death

Anyone Experience this?
Phone was on stock firmware from AT&T (never been rooted)
Plugged Phone Into the computer & opened Odin3Excution v1.00 & booted the phone into Download Mode and clicked Start on Odin. looked back at the phone minutes later and the phone had a full green screen. waited & waited and neither the phone or Odin were making progress. pulled the phone off the USB pulled the battery. restarted the computer and tried again. Now the phone will not boot at all not even the at&t smart phone screen and it wont boot into recovery or download mode.
The phone is being processed through warranty, I was just wondering if anyone had any experience with this or knows what happened. Thanks!
BTW the phone was charged 100% and the sim & sd card werent in the device.

Move to Question Thread
Can a Admin move this to the question section. Sorry for posting in Dev.

Very interesting. Never heard of this. Pull the battery out and wait lets say 1h
Then plug the battery back and hold both volume buttons while inserting the USB. Dont touch the power button.

icezar1 said:
Very interesting. Never heard of this. Pull the battery out and wait lets say 1h
Then plug the battery back and hold both volume buttons while inserting the USB. Dont touch the power button.
Click to expand...
Click to collapse
Will do. Thanks. Any One else?

jdubdieslo said:
Will do. Thanks. Any One else?
Click to expand...
Click to collapse
You can try not waiting at all at first. Just pull it out, put it it and follow what I said earlier.

i had a green screen in the middle of a flash back to stock with ODIN one click (every usb device stopped working on my machine at once)
fired it back up in download mode and odin'd it...no problem

Yep.. Mine too, two times, except that the screens was Light Blue and Yellow..

Moved to Q&A.

Lol funniest thing that I read this thread and then thought, wow must be one of the lucky one's cause that never happened. Next thing i know I go to flash back to stock and when i look over it was the green screen. I was like NOOOOO! So now im trying to install the drivers on my bro's comp since my windows partition is being a...well you know. Tried to use heimdall but I don't have the stock bootloader....just the sbl. Can anyone throw me a bone?

tytdfn said:
Lol funniest thing that I read this thread and then thought, wow must be one of the lucky one's cause that never happened. Next thing i know I go to flash back to stock and when i look over it was the green screen. I was like NOOOOO! So now im trying to install the drivers on my bro's comp since my windows partition is being a...well you know. Tried to use heimdall but I don't have the stock bootloader....just the sbl. Can anyone throw me a bone?
Click to expand...
Click to collapse
Advice, if you don't wanna risk it, find a win machine and use odin one click downloader

Sorry to resurrect and old thread, but it was either this or start a new thread for the same problem.
I was flashing back to stock from Mosaic and this happened. Green screen and nothing else. Now it won't turn on or go back into download mode. Think a jig will help this?.
Edit: Waited about 10 mins and tried again. IT LIVES!!!!

it is worth a try of jig if key combo does not work.

the same thing just happened to me. i was using odin3excution v1.00 to flash back to stock before taking the phone in to AT&T to get the warranty replacement. i got the teal/green/blue screen at factortrfs, it just sat there and killed everything usb on my computer. i pulled the battery and tried to reboot into download/turn it on/plug it in, no response whatsoever. i have the battery pulled and im waiting to try again, but if that does nothing, what can i do? i could take it in and tell them it did this in the middle of the kies update, but is that even believable? any help is appreciated, i don't have a jig and making one is last resort. thanks brothersss

I broke recovery mode ?

Hi...
Ok.. I was on rogers 2.2 stock, I was trying to follow instructions to install paragon, anyway, it didnt work, my phone was still working great tho.. so i tried flashing stock jh6 with the one click from the wiki here... That worked and I now have a rogers phone with att stuff loading up. anyway, I am trying to complete the instructions for paragon but I can no longer get to recovery mode.
the att logo keeps rebooting if i keep holding down vol up and down, what do I do now ?
Edit : I cant seem to even get to download mode Recovery mode always worked before, download mode was always tricky, but it refuses now

do you have adb installed?? if so run adb reboot recovery in command prompt.
OR
Take out battery, take out sim and SD card. press and hold VOL UP/DOWN. put in battery, press power. release power upon seeing AT&T sign. pray.
Works for me about 99 times outta 100 at this point!
but i prefer adb since its much more fool proof!

distortionist said:
so i tried flashing stock jh6 with the one click from the wiki here...
Click to expand...
Click to collapse
<captainhindsight>You should not have flashed JH6.</captainhindsight>
As per the above post, boot the phone, enable debugging and use 'adb reboot recovery'. After you get that sorted, flash the 3 button fix and never flash to stock unless stock firmware is your final destination or your phone is so hosed you have to use download mode to fix it. If you do use odin in the future then use the right one for your phone build so you don't lose your button combos.

opcow said:
<captainhindsight>You should not have flashed JH6.</captainhindsight>
Click to expand...
Click to collapse
Nor should you have allowed yourself to be photographed in a compromising position wit Courtney Love...Sorry, couldn't resist.

but I only followed instructions Everyone that asks was getting told to go try and blah blah, well that was what I was doing.
You know now I am really stuck. I did use adb and restored stock and didnt want to mess with my phone anymore, but the at&t logo kept popping up, im with rogers. I found a fix and was following those instructions when odin screwed up, it started flashing then said it failed, it happened to me once before but my combo key was working then.
I dont understand why it stopped, It seemed to be intermittent, a bunch of issues, after flashing that at&t rom.
I wish I could fix it, I am stressing out over it, ill get the stuff for that jig tomorrow and hope that works. This phone is brand new! I am not a modder or hacker, I got stiffed by rogers and samsung with the voice dial over bluetooth issue, they wouldnt take the phone back.
I would love to have the att logo gone, rogers froyo 2.2, and broken bluetooth.. Its better than a paper weight. Please help me ! You know what.. I can live what that logo.. I just want to get my phone operational.
Goodnight, and thanks for your help.

i'm guessing you didn't flash the 3 button fix that opcow suggested before doing anything else?
if you can get into download mode, flash this:
http://forum.xda-developers.com/showthread.php?t=812434

No I didn't, in its forum it says if you had no problems initially with the 3 buttons, this is not for you. Thats what it said! I was told I shouldnt have done that and should have flashed the 3 button fix after the fact.
I just bought resistors, ill be home later to try and force download mode.
Thanks for your help, I am not as upset as I was yesterday, I was tired.

[Q] Captivate wont boot, stuck on AT&T logo

hi all, I have my captivate stuck on the at&t logo, I cant get it to recovery mode. is there an "idiot" guide of how to flash it into recovery or back to the stock version?
thanks in advance!

Use odin to flash back to stock. Just search it. Will correct any mistakes you made.
Sent from my SAMSUNG-SGH-I897 using XDA App

What did you do to get it this way?

im stuck on the same thing i cant get into download mode though
becuse my phone ethier boots into the battery screen and doent stop boot again and again
or
it goes to the att screen and then turns off and goes to the screen again and again
i just update it to the ofical 2.2 and flashed backed using ondin3 one click to root the phone
how do u force the phone into download mode
ive tried all the butto combutions

Well,
axis01 said:
What did you do to get it this way?
Click to expand...
Click to collapse
I used clockwork mod and formatted all of the options including system and etc etc

UnBrickable mod is easier then 3 button fixes or jigs.. Simply remove the battery, replace the battery, plug into USB, then click the "Download Mode" button. After that, use a Heimdall One-Click to flash software. There's no fooling around with timing or trying to get the order correct, or anything... it just goes into download mode every time.
Just thought I'd put that in here. I like UBM, it's great.

I did the same, you found the solution?
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..

charlie2610 said:
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
Click to expand...
Click to collapse
Did you find the solution, because i´m in the same problem but worst because my sgs2 doesn´t turn on anymore, please help

charlie2610 said:
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
Click to expand...
Click to collapse
You have a few options and these options are as much as we can help you here.
1) Keep trying the button combos. It just might work one of these times. If you ever get it into download mode then try to flash it back to stock immediately.
2) Buy a Jig. They are available for cheap and will probably help you out. They force your phone into download mode and will allow you to flash it then.
3) Do the unbrickable mod. This involves sending your phone off for a few days, spending some cash, and having it worked on. It will come back in working order and there are even ways to have the person who worked on it flash a custom rom for you.
These are your options. And honestly, more than telling you the above, I dont think there is much more help we can offer here.
EDIT: Holy hell I just realized this post is from April. I just wasted a few minutes typing all of that. Damn.

yea. Thread resserection
Sent from my Captivate using XDA App on Team Hacksung ICS

i9001 bricked?

Hi guys, i gonna tell you about how my i9001 was stuck in a bootloop. Maybe you could help me. I'm sick of it.
Cause: I installed cm10 and cwm5 or 6 as recovery and upgrade my device using Ota Updater. When I restarted my i9001, it got stuck in a bootloop.
What my i9001 can display: It can access to rampdump mode and download mode. In case I try to turn on my i9001 or access to recovery mode the Samsung logo/word is shown twice and stops showing anything else. It often gets stuck showing the typical grey battery flat (with a loading stopped) and the black screen alternately. This is caused when I a disconnect the USB cable from my computer/laptop.
Attempts: i've tried everything except for the right solution. Lots of forum threads and nothing works for me. I've tried:
1.- Boot_loader for device boot.
2.- I've flashed an stock rom: XXKQP, and 2 more: BVKPC y XXKQ1. Each one are official.
3.- And then recovery-clockwork-5.5.0.4 and -6.0.1.2.
4.- I've tried, then, flashing feamodrecovery 1.2.
5.- Nothing works for me.
I've been using Odin 4.43. AriesVE in OPS section and when flashing these roms: one package. For recovery packages: one package and pda (I tried these two options).
I can't reach at recovery mode. Any help would be greatly appreciated. Greetings!

have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1

When phone boots there's nearlz always a solution
Sent from my GT-I9001 using xda app-developers app

slow--welder59, any of these solutions helped me. I tried with any other combination of combos but nothing happened. I didn't know to use adb method. I installed adb drivers but it didn't detect my device. When I entered to download mode and pressed Install (in the program) tried to download something but it stopped.
Any suggestion?

Can anyone help me? I want to exhaust all possible options.

zerohhorez said:
Can anyone help me? I want to exhaust all possible options.
Click to expand...
Click to collapse
What happens when you try to format data from recovery...?
If you get some errors, write them here...
If everything goes well, then it is not what im expecting (in that case problem is probably easier to solve)...

sava92ns said:
What happens when you try to format data from recovery...?
If you get some errors, write them here...
If everything goes well, then it is not what im expecting (in that case problem is probably easier to solve)...
Click to expand...
Click to collapse
The problem is just this. I cannot go to recovery mode. Just shows Samsung twice and powers off.

zerohhorez said:
The problem is just this. I cannot go to recovery mode. Just shows Samsung twice and powers off.
Click to expand...
Click to collapse
Can you open 'Download mode'?

sava92ns said:
Can you open 'Download mode'?
Click to expand...
Click to collapse
Yes I can, and that's the reason why I don't give up hope. However, I've tried installing some stock roms and recoveries and nothing worked for me.

Try one of the following (or both even if your desperate):
http://forum.xda-developers.com/showthread.php?t=1922505 (broodROM RC5 download link) [recomended]
http://broodplank.net/old/flashsamsungi9001.php (skip chapter 5 as it doesn't apply) [if that doesn't work]
edit:: USB Drivers: http://forum.xda-developers.com/showthread.php?t=961956

stepie22, thank you for your help. Nothing worked for me.
First link: another typical manual for installing a stock rom via Odin. During the process my device powered off. It was supposed to reboot. After the process ended, i disconnected it from PC and its screen showed a grey empty battery (with a loading in the middle) and word "Samsung" alternatively.
Second link: this was the solution for my first brick. Then, my device showed this yellow triangle. This second time is annoying me. I haven't found any solution to change, at least, the behaviour of my device.
Any other different solution? Thnks guys.

zerohhorez said:
Then, my device showed this yellow triangle.
Click to expand...
Click to collapse
See this ... if that is the triangle, find that part on the wiki page.

Maybe your device got the eMMC Bug?
Normally your Device would be hardbricked if you "over" flashed.
If nothing works out try this:
Have a look in this thread:
http://forum.xda-developers.com/showthread.php?t=2224029
Download CWM Recovery 6.0.2.8 ODIN Package and flash it in "Download Mode" the regular way (AriesVE.ops and onepackage).
Then maybe you are able to enter Recovery Mode again...
This might be not your problem, but you could give it a try:
Some people had issues with rebooting in recovery, so there is a fix in this post
http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Hopefully one helps you!
Greetings