Related
I have read many versions of instructions on how to root my Nook 1.10, but I am a little confused as I proceed. Here's what has happened so far:
1) I downloaded and extracted WinImage.
2) I downloaded auto-nooter 3.0, and I extracted the file using Peazip. That left me with a WinZip file. Since I don't have a copy of WinZip, I downloaded 7-Zip, and used that to extract my WinZip file.
3) That left me with an auto-nooter 3.0.0 folder.
4) Inside the folder are three files:
0.fat
1.fat
2
My question now is, which one (or more) of these 3 files do I put into WinImage to get onto my SD card? I haven't seen these three files mentioned in any other tutorial.
Thanks for the help anybody can give me.
cameraz said:
I have read many versions of instructions on how to root my Nook 1.10, but I am a little confused as I proceed. Here's what has happened so far:
1) I downloaded and extracted WinImage.
2) I downloaded auto-nooter 3.0, and I extracted the file using Peazip. That left me with a WinZip file. Since I don't have a copy of WinZip, I downloaded 7-Zip, and used that to extract my WinZip file.
3) That left me with an auto-nooter 3.0.0 folder.
4) Inside the folder are three files:
0.fat
1.fat
2
My question now is, which one (or more) of these 3 files do I put into WinImage to get onto my SD card? I haven't seen these three files mentioned in any other tutorial.
Thanks for the help anybody can give me.
Click to expand...
Click to collapse
I don't know much about your problem specifically, but after reading your report, I might suggest you link where you got the files. That way, someone might try downloading the same files and see the results you got. Easier to troubleshoot that way
Thanks for the suggestion. I got the files from here:
http://www.mediafire.com/?46vb5569wm35kp6
I got the link from xda's Auto-Nooter 3.0 instruction page:
http://forum.xda-developers.com/showthread.php?t=942424
Hope this helps.
Anybody used auto-nooter 3.0?
cameraz said:
I have read many versions of instructions on how to root my Nook 1.10, but I am a little confused as I proceed. Here's what has happened so far:
1) I downloaded and extracted WinImage.
2) I downloaded auto-nooter 3.0, and I extracted the file using Peazip. That left me with a WinZip file. Since I don't have a copy of WinZip, I downloaded 7-Zip, and used that to extract my WinZip file.
3) That left me with an auto-nooter 3.0.0 folder.
4) Inside the folder are three files:
0.fat
1.fat
2
My question now is, which one (or more) of these 3 files do I put into WinImage to get onto my SD card? I haven't seen these three files mentioned in any other tutorial.
Thanks for the help anybody can give me.
Click to expand...
Click to collapse
Can anybody help me out here? Thanks.
Sry for my poor English. This is for ppl who flash RUU-AU-OPTUS rom mainly to get S-OFF, then wanna flash back the rom they were using before they patching the AlphaRevX.
Here are the simple steps:
1, get the rom.zip from another RUU*.exe, i mean the one you want.
2, unzip the rom.zip into many img files
3, delete the hbootXXXX file. and if you want keep clockworkmod, delete recovery file as well.
4, use 7-zip to add all those files into a new .zip file (no winrar, 7-zip only)
5, rename the new .zip into the PG32IMG.zip , copy into sdcard, reboot into hboot and flash.
6, remember do a factory reset, cuz the AU_OPTUS rom will leave some funny area settings and data in the phone.
edit: sry i missed, goldcard is a must!!! make your sdcard a gold card b4 doing all these. thx 007!
Hi, tried this method just now but nothing happened.
Tried flashing it like you described as PG32IMG.zip it looks like it is running the flash but no change after reboot.
Tried also with recovery (install from zip) but unfortunately doesn't work also.
Am i forgetting something in the process?
Your missing goldcard...
This is also explained in the downgrade guide in this forum
Always something missing . Thanks.
didnt you just forgot to make changes to some specific text file as well?
like erhm, removing last line of it?
like erhm...
hbootpreupdate o.0?
just a wild guess
Hi All,
I'm relatively new to Android (had the Nexus 7 for about a year). My questions is this:
I have 4.2.2 currently loaded. When I orinally got the nexus 7, I used a toolkit to unlock the bootloader and root the device, so I could install SixAxis and a few other apps that required root.
What is the easiest way for me to now update to 4.3? Will the OTA update that is bound to show up on the device shortly work?
BTW This is the WiFi only Nexus 7, 16 GB and my main PC at home is a Mac.
Thanks.
Foxman2k said:
Hi All,
I'm relatively new to Android (had the Nexus 7 for about a year). My questions is this:
I have 4.2.2 currently loaded. When I orinally got the nexus 7, I used a toolkit to unlock the bootloader and root the device, so I could install SixAxis and a few other apps that required root.
What is the easiest way for me to now update to 4.3? Will the OTA update that is bound to show up on the device shortly work?
BTW This is the WiFi only Nexus 7, 16 GB and my main PC at home is a Mac.
Thanks.
Click to expand...
Click to collapse
Get it locked and unrooted to get OTA possiblt easiest way.
Otherwise flash the factory images:thumbup:
Sent using Nexus 7
basuraunak said:
Get it locked and unrooted to get OTA possiblt easiest way.
Otherwise flash the factory images:thumbup:
Sent using Nexus 7
Click to expand...
Click to collapse
Do you have a link of a guide that I could follow on how to flash the factory image?
Can I download the zip and then use the clockwork recovery i have installed to load the zip?
I don't think that having the bootloader locked or unlocked will really affect the OTA..
Am I right or am I right?
Foxman2k said:
Do you have a link of a guide that I could follow on how to flash the factory image?
Can I download the zip and then use the clockwork recovery i have installed to load the zip?
Click to expand...
Click to collapse
Just use wug's toolkit. Its over in the android development in the n7 section...
---------- Post added at 10:04 AM ---------- Previous post was at 10:00 AM ----------
drake90001 said:
I don't think that having the bootloader locked or unlocked will really affect the OTA..
Am I right or am I right?
Click to expand...
Click to collapse
I dont think having it unlocked will effect the ota (it hasnt in the past for me), but it sounded like he wanted to flash the factory image. I actually have a nandroid of it on my unlocked n7. Gonna flash the official and see if I can get the ota later...
I've taken OTAs no problem on an unlocked, rooted device with TWRP recovery. So you're fine.
Sent from my Nexus 7 using Tapatalk 4 Beta
Here you go for flashable zip :
http://forum.xda-developers.com/showthread.php?t=2376522
Sent from my Nexus 7 using xda premium
So I downloaded what I believe to be the right file, ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07 (1).zip.
I then reboot my nexus 7 into clockworkmod revovery and select install zip, choose zip from sdcard, browse to the aboev file but then get an error:
It ends in (Status 7) Installation aborted.
What am I missing?
Also, just tried via adb sideload and that didn't work either.
Foxman2k said:
So I downloaded what I believe to be the right file, ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07 (1).zip.
I then reboot my nexus 7 into clockworkmod revovery and select install zip, choose zip from sdcard, browse to the aboev file but then get an error:
It ends in (Status 7) Installation aborted.
What am I missing?
Click to expand...
Click to collapse
Did you install the aosp browser and rename the default browser apk and odex files or modify the buildprop file? Those must be as original to take the update. Also, you should have gotten a message about what failed when you get the Status 7 error. What else did it say?
Groid said:
Did you install the aosp browser and rename the default browser apk and odex files or modify the buildprop file? Those must be as original to take the update. Also, you should have gotten a message about what failed when you get the Status 7 error. What else did it say?
Click to expand...
Click to collapse
No to all of the above. I don't know what odex files or buildprop file would refer to, so I defintely haven't modified them.
It says:
Warning: No file_contextsVerifying current system...
assert failed: apply_patch_check("/system/bin/debuggerd", "a whole bunch of letters and numbers", "a whole bunch of letters and numbers")
E:Error in /sdcard/0/update rom/ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi - JWR66V - from - JDFQ39.ab67ca07 (1).zip
(Status 7)
Installation aborted.
Groid said:
Did you install the aosp browser and rename the default browser apk and odex files or modify the buildprop file? Those must be as original to take the update. Also, you should have gotten a message about what failed when you get the Status 7 error. What else did it say?
Click to expand...
Click to collapse
Foxman2k said:
No to all of the above. I don't know what odex files or buildprop file would refer to, so I defintely haven't modified them.
It says:
Warning: No file_contextsVerifying current system...
assert failed: apply_patch_check("/system/bin/debuggerd", "a whole bunch of letters and numbers", "a whole bunch of letters and numbers")
E:Error in /sdcard/0/update rom/ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi - JWR66V - from - JDFQ39.ab67ca07 (1).zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Does it make a difference that my current build number in "about tablet" shows as JDQ39 and not JDFQ39 as above?
The problem file is 'debuggerd' in the /system/bin folder as it says in the error message. I had the same issue previously on the last N7 update. I had to get the original file from someone since the file had been replaced by another app (possibly Stickmount) or it can be extracted from the previous update to 4.2.2. I don't know about the JDFQ39 compared to the download file showing JDQ39, but that is the same file I downloaded. The (1).zip means you had previously downloaded the file and this is an additional d/l. That shouldn't be a problem, but you can delete the (1) if you want.
I'll try flashing through CWM and let you know if mine worked. If so, I can send you the right 'debuggerd' file.
Groid said:
The problem file is 'debuggerd' in the /system/bin folder as it says in the error message. I had the same issue previously on the last N7 update. I had to get the original file from someone since the file had been replaced by another app (possibly Stickmount) or it can be extracted from the previous update to 4.2.2. I don't know about the JDFQ39 compared to the download file showing JDQ39, but that is the same file I downloaded. The (1).zip means you had previously downloaded the file and this is an additional d/l. That shouldn't be a problem, but you can delete the (1) if you want.
I'll try flashing through CWM and let you know if mine worked. If so, I can send you the right 'debuggerd' file.
Click to expand...
Click to collapse
Ok great. I do have stickmount installed...
Well, I got the debuggerd error also. I'll try the backup debuggered file I used in the last update. Otherwise, I'll have to find the debuggerd file from 4.2.2. Any help out there?
Groid said:
Well, I got the debuggerd error also. I'll try the backup debuggered file I used in the last update. Otherwise, I'll have to find the debuggerd file from 4.2.2. Any help out there?
Click to expand...
Click to collapse
Glad I'm not alone lol
Still no joy. I think someone will have to get the right debuggerd file and get it to one us on a pm or email. Also, I noticed on my update try that the file was listed as JDQ39. ... and not the JDFQ39. ... that you saw.
Groid said:
Still no joy. I think someone will have to get the right debuggerd file and get it to one us on a pm or email. Also, I noticed on my update try that the file was listed as JDQ39. ... and not the JDFQ39. ... that you saw.
Click to expand...
Click to collapse
once we get the file, how do I replace the file with the debuggerd that is currently on the nexus?
What I will do is to copy the debuggerd file to the N7 internal storage root folder from my pc. Then I will rename /system/bin/debuggerd to debuggerd.bak (or whatever extension you want to add). Then I will copy the correct debuggerd file from sdcard to /system/bin and try the update again. I started a new thread asking for someone with an unaltered 4.2.2 debuggerd file to send it to me. If I get it I'll pass it along to you.
Groid said:
What I will do is to copy the debuggerd file to the N7 internal storage root folder from my pc. Then I will rename /system/bin/debuggerd to debuggerd.bak (or whatever extension you want to add). Then I will copy the correct debuggerd file from sdcard to /system/bin and try the update again. I started a new thread asking for someone with an unaltered 4.2.2 debuggerd file to send it to me. If I get it I'll pass it along to you.
Click to expand...
Click to collapse
Are you using a tool like ES File Manager to do the moving and renaming of files etc?
Hey All, have google and googled for the past week but nothing specific to this issue I'm having.
I want to restore my stock firmware so I can get OTA updates! I didn't make any sort of backup when I began playing with different roms. I have htc_039 unbranded aus htc one. Bootloader has been unlocked with S-on and TWRP installed.
Downloaded Deevans/bugsys nandroid backup that matched my phone details (http://forum.xda-developers.com/showpost.php?p=41368105&postcount=375&nocache=1&z=2030115523399023) but there isn't any sort of instructions on installing these.
When i have tried to flash the rom I get "installation aborted" and when playing with fastboot it has given me messages that it cannot find certain .txt files (something like android.txt and a few other ones.
Could someone please tell me what im doing wrong or list the instructions to install this? I don't know if I have to lock the phone again, restore the recovery file first, no idea!!! Or is there anyway to turn the Android Revolution 12 image to get OTA (i dont think so)?
If you need any further phone info I will post.
Can anyone help with this?
When I try to flash the file in TWRP it starts and stops at "Updating partition Details".
What have i not setup right? Have been using these resources:
http://www.androidpolice.com/2010/0...nandroid-backup-and-clockworkmod-rom-manager/
http://www.addictivetips.com/mobile/how-to-perform-and-restore-a-nandroid-backup/
http://www.redmondpie.com/how-to-ba...android-using-clockworkmod-recovery-tutorial/
http://www.redmondpie.com/how-to-in...recovery-on-your-android-smartphone-tutorial/
http://androidteen.com/how-to-restore-htc-one-to-stock-firmware/#Nandroid
???
Hi,
I'm new to the htc one so not sure here but from what I understand and anyone please correct me if wrong - but if it's Deevans nandroid 1.29.980.2 (Australia unbranded) it's a CWM backup and I don't think they work in TWRP.
So think you would have to flash CWM, then flash "restore" nandroid from CWM or find a TWRP nandroid.
Also think you need s-off before you do ota as no way to gain s-off with revone on updated hboot 1.54 yet.
Hope this helps.
pjc21 said:
Hi,
I'm new to the htc one so not sure here but from what I understand and anyone please correct me if wrong - but if it's Deevans nandroid 1.29.980.2 (Australia unbranded) it's a CWM backup and I don't think they work in TWRP.
So think you would have to flash CWM, then flash nandroid from CWM or find a TWRP nandroid.
Also think you need s-off before you do ota as no way to gain s-off with revone on updated hboot 1.54 yet.
Hope this helps.
Click to expand...
Click to collapse
Thank for the reply
I have tried to install this with CWM which gave me those first missing ".txt" files. I will give it another go with CMW and post the results.
I will also S-OFF before doing the above.
Phone is now S-off and put CWM as the loader. Tried the zip file again and says:
Finding update package
Opening update package
Installing update...
Installation aborted.
I have also downloaded the file twice to confirm its not corrupted and it opens through winrar with no problems.
Any other suggestions?
jgt777 said:
Phone is now S-off and put CWM as the loader. Tried the zip file again and says:
Finding update package
Opening update package
Installing update...
Installation aborted.
I have also downloaded the file twice to confirm its not corrupted and it opens through winrar with no problems.
Any other suggestions?
Click to expand...
Click to collapse
I would try restore it like a backup, so unzip and put files in your CWM backup folder.
Not sure how CWM backup folder looks but in TWRP it's like /sdcard/TWRP/BACKUPS/... or /data/media/0/TWRP/BACKUPS/...
So I would try unzipping and copy files (boot, data, recovery, system) to /sdcard/CWM/BACKUPS/folder/put files in here - then boot to recovery and try "restore" option and browse to backup folder. You could probably copy the files to any folder on the sdcard and restore from recovery not sure.
pjc21 said:
I would try restore it like a backup, so unzip and put files in your CWM backup folder.
Not sure how CWM backup folder looks but in TWRP it's like /sdcard/TWRP/BACKUPS/... or /data/media/0/TWRP/BACKUPS/...
So I would try unzipping and copy files (boot, data, recovery, system) to /sdcard/CWM/BACKUPS/folder/put files in here - then boot to recovery and try "restore" option and browse to backup folder. You could probably copy the files to any folder on the sdcard and restore from recovery not sure.
Click to expand...
Click to collapse
Thanks for your suggestion and that was going to be my next question. The file I mentioned in the first post is x.xxx.xxx.zip (x as the numbers) and inside that zip is a folder with the same name x.xxx.xxx and inside that folder are all the files.
I tried putting the folder only in CMW but wont detect it, tried it with the .zip file and fails. Have now just put all the files into the folder and tried again with same failure.
There is a very long error in the recovery.txt file it made, don't know if its any use but the first line that pops out is:
Starting TWRP 2.6.0.1 on Fri Aug 2 06:23:49 2013
BOARD_HAS_NO_REAL_SDCARD
I put the file into this link if you know of anything, makes little sense to me. http://pastebin.com/Tvp2Qp2X
jgt777 said:
Thanks for your suggestion and that was going to be my next question. The file I mentioned in the first post is x.xxx.xxx.zip (x as the numbers) and inside that zip is a folder with the same name x.xxx.xxx and inside that folder are all the files.
I tried putting the folder only in CMW but wont detect it, tried it with the .zip file and fails. Have now just put all the files into the folder and tried again with same failure.
There is a very long error in the recovery.txt file it made, don't know if its any use but the first line that pops out is:
Starting TWRP 2.6.0.1 on Fri Aug 2 06:23:49 2013
BOARD_HAS_NO_REAL_SDCARD
I put the file into this link if you know of anything, makes little sense to me. http://pastebin.com/Tvp2Qp2X
Click to expand...
Click to collapse
Are you using TWRP recovery? or CWM recovery?
pjc21 said:
Are you using TWRP recovery? or CWM recovery?
Click to expand...
Click to collapse
I have now tried both TWRP and CWM and fails, also have installed ROM manager and another one I cant recall from play store. Also booted into recovery and went to the 'restore' option from the menu but cant find any directories..
I dont know if this has anything to do with it but noticed in the contents of the file:
ARCHIVE: cache.ext4.tar
ARCHIVE: data.ext4.tar
ARCHIVE: system.ext4.tar
boot.img
cache.ext4.tar.a
data.ext4.tar.a
nandroid.md5
recovery.img
recovery.log
system.ext4.tar.a
system..ext4.tar.b
Not to get ahead of myself but HTC ONE is ext2or 3 by default, its not something simple as having to change it to ext4? Its just something that stood out.
Just done google search on CWM backup location and seems to be /sdcard/clockworkmod/backup - so you could try copy the zip and/or files there and try restore from CWM recovery and see if that works.
pjc21 said:
Just done google search on CWM backup location and seems to be /sdcard/clockworkmod/backup - so you could try copy the zip and/or files there and try restore from CWM recovery and see if that works.
Click to expand...
Click to collapse
Interesting that there was no 'backup' folder inside that folder. Have created it and putting the files and zip in there now.
Was also googl'n and found this article:
http://miuiandroid.com/community/th...d-restore-error-while-restoring-sd-ext.15611/
Someone mentioned to now open the zip file when it downloads. I'll try your suggestions and this and let you know what happens tomorrow.
Thanks again
Morning,
Have downloaded the .zip file again twice and put it onto the SD and clockwork Mod backup folder and it has aborted again.
Any ideas on what to try from here?
I am looking for a rom zip file for a T-mobile HTC desire 626s. All I keep finding are the ruu's. I need a zip file so I can install OS via TWRP. Anyone know where I an find and download one, really need as soon as possible.
Flashing without RUU
First, download the RUU and run the .exe up until it prompts you to begin the install to the phone. Don't do that.
Go to Windows Explorer and in the address bar put "%temp%" and find "rom.zip"
Rename it "0PM9IMG.zip" and put it in the root directory of your external SD and from here you can do whatever you want. I used the bootloader to install it rather than TWRP.
Thanks
Stiza said:
First, download the RUU and run the .exe up until it prompts you to begin the install to the phone. Don't do that.
Go to Windows Explorer and in the address bar put "%temp%" and find "rom.zip"
Rename it "0PM9IMG.zip" and put it in the root directory of your external SD and from here you can do whatever you want. I used the bootloader to install it rather than TWRP.
Click to expand...
Click to collapse
It worked and now my phone is back to working, thank you.
Kaos80x said:
It worked and now my phone is back to working, thank you.
Click to expand...
Click to collapse
No problem, man. Glad I could help! Give thanks if it helped enough:laugh:
This also works well when their installer dies immediately after unpacking which it was doing for me.
also need a zip file from which i can restore my phome from twrp because i accidentially deleted my rom. please guide me how do i install a new one on my rooted htc 6262s twrp installed.
(