Database Develop

[Q] unlock rom image for hp 6515

Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.

Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone

SKU error,, did not work

Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.

My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.

Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?

ROM Update 6515
SKU-error means wrong language.....

deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20

I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............

Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.

SKU ERROR help pls

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?

Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%

[BETA] WM6.1 Clean Developer Edition Revision 1.1

After long last, I've finally updated the WM6.1 Clean Developer Edition and have fixed up almost all the problems you guys had with the original.
Changes from original 1.0 version:
Portrait Camera now working
MMS 4.0 is included with basic MMS settings
Custom splash screen!
Some other bugs I can't remember...
User Customization 2.0 - You'll really like this if you have a microSD card!
Installation:
Installation is now completely automated. If you are currently running the official T-Mobile ROM, please run the CID Unlocker.exe that is included.
Once you are CID Unlocked, run the Windows Mobile 6.1.exe program.
Done!
If at any time you want to go back to the T-Mobile ROM because of an error flashing or whatever, you will need to turn your phone on in bootloader mode. To do this, hold down the camera button and then press and release the power button while still holding the camera button down. Your phone should go to a screen with red,green, and blue bars. Plug it in to your computer now and run the T-Mobile Update from their site.
Download link: http://www.sendspace.com/file/vxxsq3
Rapidshare mirror: http://rapidshare.com/files/133831473/Clean_Developer_Edition_Revision_1.1.rar.html
Note: The T-Mobile Edition BETA 2 will be released sometime later today or tomorrow for those who have been waiting for an update since the last.

works great so far! thanks again for the updates

Beautiful, I love for your work .

did you add rickwyatt fix for the interface
edit
after trying to download this 10 times already im kinda pist
upload it somwhare else it stops like half way

huh?
okay i must first apologize for my ignorance, as i am very new to this. first what is "CID unlocked"? Also, are there still bugs being worked out of this rom? i previously had a dash ( HTC Excalibur ) and used a 6.1 rom from an xda member and really liked it. T-mobile has not issued a release date for wm 6.1 and frankly i am sick of waiting! will this rom work the same as the previous rom i used for my dash? thank you ahead of time for any answers and help you may be able to provide me with.

Everything works perfect! The only thing I have not tried is mms but I don't mms often.
Thank you for all your hard work!

Noted BUGS
#####
#BUGS
#####
1.) To upgrade from Dev 1.0 to 1.1, I for some reason had to cid unlock. For some reason, every time I tried to flash the Juno, I kept getting an invalid certificate message.
2.) Microsoft's Getting Started App is missing.
3.) After LiveSearch is installed, when a user tries to exit the application they would encounter a missing resource error. (Note: This never occured in the 1.0 version. I'm currently googeling for a solution).
-----
That's all I could find. Otherwise, great ROM. I've noticed it works a bit faster then the 1.0 Rom, what changes did you make?

I also upgraded for dev1.0 to 1.1 and did not have to cid unlock the exe worked great
live search I have no problems with and get no error win exiting
getting started is missing and looked in the windows folder I did not see it there so I think he removed it but who needs it I did have a died shortcut in the all programs for it but after adding more programs to it it is gone
the battery on the settings slide still needs to be edited in the reg to open
still have to try User Customization
but all and all works great

hopefuly need4speed can make a cab to fix these bugs brcouse im kinda sick of flashing my phone

im also waiting for a mirror

ahhh victory
I had some bugs that didnt bother me so much on 1.0, so I am excited for an update.
And I will never get sick of flashing my phone MU HA HA HAhahaha!
When I have it up and running I will post notes of usage ND4, Thank you so much for this.

kron2 said:
I also upgraded for dev1.0 to 1.1 and did not have to cid unlock the exe worked great
live search I have no problems with and get no error win exiting
getting started is missing and looked in the windows folder I did not see it there so I think he removed it but who needs it I did have a died shortcut in the all programs for it but after adding more programs to it it is gone
the battery on the settings slide still needs to be edited in the reg to open
still have to try User Customization
but all and all works great
Click to expand...
Click to collapse
Okay, I'll reflash my phone, and see if i have any problems.

Problem with install
Hi All
I have tried several times to follow the steps to upgrade to this Windows Mobile 6.1 using ND4SPD's file from both download sites. After running the unlock procedure, when I start the Windows Mobile 6.1.exe installation proceeds to just after the status bar comes up on the phone, Then, I get an error that the image file is corrupted. The phone reboots back to Windows Mobile 6 Standard.
What could the problem be?
Tim

What exactly does user customization 2.0 do?

timtillman said:
Hi All
I have tried several times to follow the steps to upgrade to this Windows Mobile 6.1 using ND4SPD's file from both download sites. After running the unlock procedure, when I start the Windows Mobile 6.1.exe installation proceeds to just after the status bar comes up on the phone, Then, I get an error that the image file is corrupted. The phone reboots back to Windows Mobile 6 Standard.
What could the problem be?
Tim
Click to expand...
Click to collapse
Dose your phone turn white after running CIDunlocker.exe? Also u have to remove storage card and restart phone before anything.

This rom works in gene p3401?

kormanb1123 said:
Dose your phone turn white after running CIDunlocker.exe? Also u have to remove storage card and restart phone before anything.
Click to expand...
Click to collapse
I just tried without the memory card.
Yes it turns white. The unlock util reports success.
I reboot the phone, start the update util, the screen gets red green and blue bars.
At 2%, the update util shuts down with:
"ERROR [270]: Update Error"
"The image file is corrupted. Please check your update utility."
The phone then reboots.
So, what do you think ?
Tim

@tech_hardman: this will NOT run on the gene. It is specifically meant for the htc juno. If you try it, it might brick your phone.
@guitarkid6920: UC 2.0 basically allows you to have all of your settings, programs, etc installed automatically after the rom is installed so you don't have to work on it every time you flash a new rom.
@timtillman: Make sure that after your phone gets the app unlock that your phone restarts. Physically disconnect from your computer and wait for it to restart after the app unlock. It should work.

ND4SPD said:
After long last, I've finally updated the WM6.1 Clean Developer Edition and have fixed up almost all the problems you guys had with the original.
Changes from original 1.0 version:
Portrait Camera now working
MMS 4.0 is included with basic MMS settings
Custom splash screen!
Some other bugs I can't remember...
User Customization 2.0 - You'll really like this if you have a microSD card!
Installation:
Installation is now completely automated. If you are currently running the official T-Mobile ROM, please run the CID Unlocker.exe that is included.
Once you are CID Unlocked, run the Windows Mobile 6.1.exe program.
Done!
Download link: http://www.sendspace.com/file/vxxsq3
Rapidshare mirror: http://rapidshare.com/files/133831473/Clean_Developer_Edition_Revision_1.1.rar.html
Note: The T-Mobile Edition BETA 2 will be released sometime later today or tomorrow for those who have been waiting for an update since the last.
Click to expand...
Click to collapse
Sounds great! By the way I'm newbie here and can you help me to do this step by step coz i'm little scared to try. I'm with the original 6.0 rom and if ever error happens can you pls add also the procedure to bring it back to original rom, tnx.

Sure thing. I'll update the post right now.

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...

Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799

drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways

error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck

DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho

error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...

DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl

error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps

DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here

Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.

ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...

Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.

NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server

http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help

error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers

circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks

DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update

error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection

1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL

kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom

erm... what now?

I no newbie when it comes to installing roms, but im encountering my first problem. I installed the genesis 1.5 [WWE 23569] (love it!) and used it for a few days. Then i felt like testing out the Tai [23569 2015 3712 WWE] (also great!) I decided to reinstall the genesis rom again, but now the rom wont finish loading.
Im stuck at the final grey screen where it says "Update in Progress" but no prompt comes up to say the OS was installed successfully. As you all know this process takes less that a few mins to finish... i've been waiting forever.
What can i do? Try another copy of the same rom from another SD Card?
Please help!

In the course of my flash ROM,I had never come across this problem,why not try to format memory card?and do it again....just a advice....

was thinking the same thing, but im looking for alternatives before i track down a card reader lol

why don't you flash directly from your computer ?

I don't think you can flash from the computer without an ActiveSync connection, and for that you need the phone to be working already.

at45 said:
I don't think you can flash from the computer without an ActiveSync connection, and for that you need the phone to be working already.
Click to expand...
Click to collapse
Try the Custom_RUU (Rom Updater Utility) via PC and see if it works

[TMOUS][ROM][WWE][Nov.5.2010] UltraLite 370MB - INCLUDES ANDROID - THE EASY WAY!

ANDROID THE EASY WAY
NOW AVAILABLE!​
This Process will NOT be quick, but it’s easy and runs great!
Takes about 1/2 hr to set up the first time. It's an All-In-One Flash - Includes Stripped WM, Android, and Compatible Radio.​
Includes an AWESOME Android build, Desire Sense - BlueTopia v0.6, by cmylxgo.
FAST, STABLE, COOL as Heck! It is installed on top of my Super Ultra Lite ROM.
Booting into Android is controlled by My Android MortScript.​
ROM is based on latest T-Mobile 3.14 with almost everything removed. Not really worth booting into this ROM as it's just used to load Haret to get Android going.​
If you want to Flash this ROM then change the Android build to another, you may by replacing the Android Folders on your SD Card with your desired Build.​
Please read all below before starting.​
Download all files listed:
AutoFlash SuperSport Android BlueTopia 6.exe Grab All 4 Parts (MediaFire Link) Sorry so LARGE!! Only way to include everything. MediaFire allows Multiple downloads at a time. If you have a fast Connection, grab all 4 pieces at once.
Task29 provided by doloop.zip (Attached) If needed
HardSPL3 (Attached) If needed​
Unzip Task 29 and HardSPL3.​
Clean old Android and any Android helper folders OFF SD Card ie: Android, Media, FilesToBeDeleted, etc. For best results, backup your card, then re-format FAT32.​
Be sure your SD Card is re-installed in your HD2.​
Flash HardSPL3: Run HSPL3_PKG.exe, or be sure you’ve already done it in the past. Follow the instructions found HERE if you don’t know how. This will take about 3 mins.
Task29: Run Task29 provided by doloop.exe. This should be done before ANY Flash. If running Windows Vista or 7, you must Right Click and Run as Administrator. Be sure your phone is connected by USB before running and follow the instructions. It’s just like flashing a ROM. When it reaches 95%, press and HOLD the Volume Down button until it reboots into Bootloader Mode (Red, Green, Blue Screen). This will take about 2 mins.
Flash My ROM: Be sure your SD Card is installed in your HD2, then Flash your phone with my ROM. Be sure your phone is connected by USB then enter Bootloader Mode (Red, Green, Blue Screen) by Holding Down the Volume Down button while turning on phone. Run the file "AutoFlash_SuperSport_Android_BlueTopia_6.part1.exe". Follow the Instructions until your phone Reboots. This will take about 7 mins.
Allow windows to start up first time. This will take about 1 mins. DO NOT PRESS YES when prompted if you want to Boot into Android. That will come later. WARNING!!! DO NOT PRESS 'YES' YET! This will cause Android to NOT INSTALL! (If this happens, use the File Explorer to browse to the Windows Directory and Run the Cab "SuperSportAndroidBlueTopia6.cab". Be Sure to install it to your Storage Card, NOT Main Memory. Delete this CAB after installation completes.)
Android will now Silently Install to your SD Card. This will take about 4 minutes. Wait for the XDA UC Service End message and tap OK. YOU MUST WAIT FOR THIS. If it does not come up within about 5 mins, then something might have gone wrong. Flash Task29 again and start the ROM Flash over.
You can now Select Yes to the Window asking if you want to Boot into Android. (Future boots will ask this again. Just select YES to boot Android, or NO to stay in Windows.)
Android will now start up. You will see the Green hTC logo. Allow Android to set up the Data Space. This takes a LONG time! Be VERY Patient. Up to 10 mins the first time (Mine was 8 mins, Future boots after the first time boot quickly). It will sit on HTC logo for a LONG time, then blank screen, then final boot.
Future boots will now give you a prompt to allow Auto Boot into Android, or you can select to go into Windows if you are so inclined. You can also use Android-Ubuntu to change the Auto Boot settings to be quicker or slower, or boot into Windows if you prefer, although, there's not much there.
To boot back into Windows, Remove your SD Card and Reboot. To Flash another ROM, enter Bootloader - Hold down the Volume Down button while powering on your phone.
For my ROM WITH Android, Download above.
For those who just want the WM ROM Without Android Built in, Download Below.
This ROM has the following:
-Free RAM: 373.90MB WOW!!!
-Free Storage: 705.06 WOW
-Very Little left of Windows. It really is not usefull for anything except starting Android.
4 Flavors:
NO Radio NO BootScript - Best for those who already have an Android Compatible Radio and want to use their own Boot Program.
AutoFlash SuperSport Android Ready SuperUltraLite NO Radio NO BootScript.exe
With Radio NO BootScript - Best for those who still need the Radio, but want to use their own Boot Program.
AutoFlash SuperSport Android Ready SuperUltraLite w Radio NO BootScript.exe
NO Radio With BootScript - Best for those who have have an Android Compatible Radio but want to use my Simple "Yes/No" BootScript.
AutoFlash SuperSport Android Ready SuperUltraLite NO Radio w BootScript.exe
With Radio With BootScript - Best for those who need the Radio and Want to use my Simple "Yes/No" BootScript.
AutoFlash SuperSport Android Ready SuperUltraLite w Radio w BootScript.exe
To Do:
Create Cabs of future Android Updates that can easily be installed on top of old builds, or on top of my Android WM ROM.

Looking forward to it
BlueTopia is a nice choice.. Do you think you can post the winmo build?
And have you thought about using UC_NET instead? As you can see the progress bar during setup, might make it easier for some people that arent familiar with UC.. just a thought

Scabes24 said:
Looking forward to it
BlueTopia is a nice choice.. Do you think you can post the winmo build?
And have you thought about using UC_NET instead? As you can see the progress bar during setup, might make it easier for some people that arent familiar with UC.. just a thought
Click to expand...
Click to collapse
I will look into it. Any idea if it can force install to SD Card? That's the trouble I have with XDA_UC, I don't understand it enough to know how to silent install to the SD Card. I'd love to have a progress bar too.
I will post the WinMo build when I have it working properly. There's an issue with the AutoBoot function that I think might be due to the ROM being SO Stripped.

SuperSport said:
I will look into it. Any idea if it can force install to SD Card? That's the trouble I have with XDA_UC, I don't understand it enough to know how to silent install to the SD Card. I'd love to have a progress bar too.
I will post the WinMo build when I have it working properly. There's an issue with the AutoBoot function that I think might be due to the ROM being SO Stripped.
Click to expand...
Click to collapse
Hmm.. I'm not sure actually, here's the thread for it. Maybe take a look at post 3 (portable commands) in that thread.
Here's a post from him on that topic, from a while ago though (July).

Really Dumb Noob Android Question
I have to use Outlook (corporate environment kind of thing...not Exchange). What is the best way to be able to synch Contacts and Appts. between Outlook and Android?
That is, so far, the only thing holding me back from giving Android a try. And this ROM appears to be a great way to try it out.
Thanks for any advice.

Can you please make a release of JUST the winmo rom? That way we can simply apply whatever android distro we wish to our SD card, and the download is smaller : D

BJohnM said:
I have to use Outlook (corporate environment kind of thing...not Exchange). What is the best way to be able to synch Contacts and Appts. between Outlook and Android?
That is, so far, the only thing holding me back from giving Android a try. And this ROM appears to be a great way to try it out.
Thanks for any advice.
Click to expand...
Click to collapse
As far as I know, there is not a way to sync using WMDC. It needs to be done using HTC Sync, or using your google account. To use Google, you can set up an email account as an Exchange Account. Set the Server as m.google.com and tell it to sync your email, contacts, and calendar. For some reason, tasks do not work, so don't check them. If you set up Outlook AND your Phone to use the same Google Exchange account, then things will sync wirelessly WITHOUT having to connect to USB. Be aware this will likely use a little more battery if you allow it to sync often.
To use HTC Sync, download it from HERE and install it on your PC. Your phone will need to be set to HTC sync when you connect it to USB.
hereric said:
Can you please make a release of JUST the winmo rom? That way we can simply apply whatever android distro we wish to our SD card, and the download is smaller : D
Click to expand...
Click to collapse
Yes, when it is working properly, I'll post JUST the WinMo ROM. Currently, it's running just fine, I'm just having trouble getting it to AutoBoot when started.

Ok, I just added to the First Post a link for the WM ONLY ROM. This ROM does NOT include Android.
ROM Specs:
Free Ram - 373.90 MB WOW!!
Free Storage - 705.06 MB WOW
Includes Radio: 2.15.50.14
Download Size: 53.1 MB
Link Below also:
DOWNLOAD SuperUltraLite Android Ready ROM
Still touching up my All Inclusive Android ROM, Sorry for the Delay.

NOW AVAILABLE!!!
Please see First Post for Details.​

Out of curiousity, is it still possible to run a winmo program since the android os is just an overlay? If so, how?
Also, I tried youtube and the video is horribly choppy. audio is fine but video is stop and go ... stop and go... is this a known issue?
Any soft reset shortcut?
other note: tried running angry birds and it doesnt work.

marscandybars said:
Out of curiousity, is it still possible to run a winmo program since the android os is just an overlay? If so, how?
Also, I tried youtube and the video is horribly choppy. audio is fine but video is stop and go ... stop and go... is this a known issue?
Any soft reset shortcut?
other note: tried running angry birds and it doesnt work.
Click to expand...
Click to collapse
Actually Android is not overlay on top of Windows. Windows starts haret, then shuts down completely, only leaving Android running. The only way is to reboot, and not boot into Android.
My YouTube is really smooth, but that's over WiFi. Haven't tried over gprs.
No soft reset that I know of. Only holding power button and shutting down.
After trying to run AngryBirds the first time, you must reboot back into Android and run it again. It will run second time around.
PS: one thing I've noticed is that after a couple reboot, things seem to get smoother.
Unfortunately, Android isn't perfect on the HD2 yet, but it's getting better every day...

I had to format the card twice and it started working ... yay
Holding the end button with this android OS gives the option to reboot: http://forum.xda-developers.com/showthread.php?t=780525
I very much appreciate your hard work

marscandybars said:
I had to format the card twice and it started working ... yay
Holding the end button with this android OS gives the option to reboot: http://forum.xda-developers.com/showthread.php?t=780525
I very much appreciate your hard work
Click to expand...
Click to collapse
That brings up a good point. If anyone wants, you can delete the Android off the SD Card and replace it with your favorite flavor. The Boot Script should still work, as long as you place the Android build into the folder Android with CLRCAD.exe and haret.exe in that same Android folder, not a sub folder.

awesome rom thank you,...runs very smoothley and first one where everything has worked!! as soon as funds come in you will be my first donation..
only problem is batterylife life and data speed i live in socal what radio will u reccomend im on tmobil network . and 2 youtube is very choppy unless i use wifi.

blink 182 said:
awesome rom thank you,...runs very smoothley and first one where everything has worked!! as soon as funds come in you will be my first donation..
only problem is batterylife life and data speed i live in socal what radio will u reccomend im on tmobil network . and 2 youtube is very choppy unless i use wifi.
Click to expand...
Click to collapse
Please keep in mind that the Android Build is NOT mine. Please donate to cmylxgo as he is the one who put the Android build together. I cooked the WM ROM, added the Radio, added his Android ROM, and created the BootScript. I just wanted to come up with a way for people to try it that just worked, so I put it all together in one easy to flash package.
Yes, there are still some issues with running Android on WM, but it's slowly getting better. cmylxgo has mentioned a new Android Build coming up shortly. I'll see if I can add it to this thread when it's released.
I've heard about YouTube by a couple of you now. I don't know yet what that is. Not sure if it's My ROM, or the Android Build, but when I find out, I'll try to create a fix.
EDIT: The radio on the first post is the only one I've tried with Android. I'm on ATT, so not sure how that compares to you.

thanks for this simple guide.. *so simple, even a caveman can do it* noob question, how do i restore the phone to factory settings incase I need to send it in?

hd2_2010 said:
thanks for this simple guide.. *so simple, even a caveman can do it* noob question, how do i restore the phone to factory settings incase I need to send it in?
Click to expand...
Click to collapse
Hehe, I like that. To revert, you would need to flash the HardSPL back to 2.08 (Use HardSPL 3 and select the 2.08 version), then flash the Stock ROM back on. As far as Android goes, just delete it off the SD Card. My ROM simply copies Android from the ROM to the SD Card and sets up links.

Does the camera work in this one? I really want to ditch WinMo and go to Android, but I want to first be sure everything works. I have read in some other threads that camera support is not working, which seems like it would be a deal breaker for many people.

jasonatr0n said:
Does the camera work in this one? I really want to ditch WinMo and go to Android, but I want to first be sure everything works. I have read in some other threads that camera support is not working, which seems like it would be a deal breaker for many people.
Click to expand...
Click to collapse
Yes, it does. That's a deal breaker for me too. I do have occasional data connection problems, but I'm almost always on WiFi, so it has not been a huge deal for me yet. It sounds like cmylxgo is working on the data issue along with other fixes with his Android Build. I will likely update this ROM when that happens. I'll also post instructions for those who do not want to flash the ROM again and just want to update their Android Build.

everything works perfectly, I just flashed it 3 days ago and I'm very pleased so far..... and belive me I've almost tried everything around here.... Thank you Super Sport to put all this togheter.