Database Develop

sometimes when tilt sleeps, it wont wake?

hi,
about 2-3 times this week, my tilt would go to sleep, but when i press the power button, it would not wake. i know there is still power because of the blinking green and bluetooth light. any suggestions on how to fix this?

I think that's the "Sleep of Death". Do a search for it. For me, I did a hard reset and it went away.
Good luck!

happens to me also. So annoying, next time it happens call yourself and see if the phone wakes up or if it jumps straight to voicemail, i'd like to know mines hasnt done it in a while. I think it happens when you have it plugged into the wall for a long period of time and its sleeping. Like that night when you're sleeping.

I've had that problem a few times but its mainly only when its on the charger at night that it happens. What I've been doing now is just not turning it off at night when its charging that way the alarm goes off in the morning. Some people don't like it on as the screens not completely off and the light drives them nuts.

are you within the 30 day period, as in a new contract? I am on my 4th phone, the three before this one all had the same problem not waking, hopefully you are not past the 30 days and can trade it in, you could always try installing the new ATT rom, it might fix your issue I have heard it helped some, if nothing else its worth a try.

firefly77 said:
are you within the 30 day period, as in a new contract? I am on my 4th phone, the three before this one all had the same problem not waking, hopefully you are not past the 30 days and can trade it in, you could always try installing the new ATT rom, it might fix your issue I have heard it helped some, if nothing else its worth a try.
Click to expand...
Click to collapse
Do youy use any other roms? Do you hard reset?

This happened for the very first time to me this week on my tytn 2. Fixed it by taking the battery out. Had my phone for 6 months.

my alarm didn't go off this morning for that very reason....good thing I have 2 other alarms...lol
I thought my problem was charging related, but I didn't charge it overnight...

I have had the same problems too , on my fourth phone now . What has seem to of helped was removing the micro sd card , doing a hard reset and for the last 4 days , had no further "sleeping" problems .
it would be interesting to find out whether you all have been using micro sd cards in your phones ( THIS COULD BE CAUSING THE PROBLEM) Or should I say a faulty sd card could be causing the problem .

also some interesting points regarding the same topic here
http://forum.xda-developers.com/showthread.php?t=351404

~~Tito~~ said:
Do youy use any other roms? Do you hard reset?
Click to expand...
Click to collapse
When I had the first three phones I was just typical "Joe Consumer" I had no idea about this website or any of the cool stuff I have learned here. So consequently I just knew there as a problem and it was pissing me off so I kept taking them back and swapping. If the 4th didn't work I was going to go with the iphone so I could have something to use when I travel to check email and other BS. But the 4th worked and all is well. Although sometimes i wish I would of got the Iphone just because of battery life and it is alot faster with applications than my phone at least. But I cant take that feeling of being in a Jail Cell every time I hold that thing...........

A Few Issues

Just wondering if anyone else has or is experiencing any of these issues.
Had a HTC TyTN II for about a year now (I think).
Sometimes turning it on, the screen doesn't sync properly. You get the waivy lines, and have to hit the power button a few times to turn it off and back on, eventually it turns on properly.
Device cannot read MicroSD cards.
I'm thinking one of the cables that connects the top part of the device to the bottom is coming loose, however, I knoticed that when doing hard resets, it lowers the frequency of this happening, until the device gets filled with data and apps... This is the second time ive done the hard reset to make it usuable.
Super odd... Typicly if a hard reset fixes it, it woulnd't be hardware issues, but I still have issues with the MicroSD card.
Just wondering if anyone has any hardware failure stories.

Tried changing spl's and radios yet ?

sorry for the hijack but do you or anyone else have an issue with a bluetooth headphone. i've tried different bluetooth devices and on incoming calls if i use the bluetooth to answer the callers hear a loud screeching sound for a second. but using the same headset if i press the answer button on the phone the screeching doesn't occur. i've tried 3 different headsets and all had the same issue. any ideas??

SPLs?
I havn't modified the firmware or anything whatsoever. Running HTC firmware. No special addons or mods..

Then your warranty should come to the rescue - see what they say!
Zhariak said:
SPLs?
I havn't modified the firmware or anything whatsoever. Running HTC firmware. No special addons or mods..
Click to expand...
Click to collapse
Then if it's a HTC TyTN II, the warranty is just over a year (I think it was about 15 months on mine) so it'd be worth contacting HTC pronto with your phone to hand to see if you can get it fixed under warranty. Let us know how you get on.

Wow,
So I noticed that the MiniSD card reader has been going lately. Card goes in, it doesn't recognize it. have to put it in 20 times to get it to recognize it.
ANYWAYS....
I decided to take the card out, cuz its pissing me off and almost pointles. BAM the phone became super responsive. When u hit the power button the screen turns on instantly. When your on a phone call and press hangup, it hangs up normally (there was a 10 second delay before that it would take to turn the screen back on and hang up the call).
So I think its JUST the microSD slot thats fried, i think since its kinda working, it was causing freezing issues and caused the phone to freeze, etc...
I don't care that it doesn't work. Ive sent stuff in for warranty before, I always get stuff back in worse condition then i sent it with new stuff broken. I cant go without exchange push for longer than 4 hours at night, so im going to live without the microSD card. lol
Thanks anyways guys!

Zhariak said:
Wow,
So I noticed that the MiniSD card reader has been going lately. Card goes in, it doesn't recognize it. have to put it in 20 times to get it to recognize it!
Click to expand...
Click to collapse
Wow indeed. Maybe the problem is related to the card itself or whats on it. Try backing up the card (using its usb reader) then reformat it in FAT32 and with the phone totally powered off insert it. Boot up and see how the phone then performs. If this still proves problematic and you don't want to get it fixed under warranty there's not much anyone can do to help I'm afraid.

Card is fine! Tried 5 others, lol.
maybe some pins are crossed or something inside the slot.

Mine is having same problems exactly. sometimes if i reboot with the slide open it will work ok sometimes not wtf

Weird... thats odd that someone is having the same issue...
OMG ITS THE Y2K9 bug!!!

long delay placeing call? thanks

Can someone help me how come every so often I place press call after entering a number there can be a delay of 5 to 30 seconds where nothing happens. Or of I push the name of a recent call it has the same delay. If I push it many times sometimes it will continue placing new calls while I'm already called. I'm running Sprint 2.1 official. Thanks

you probably don't have very good service where you are, unless you deny that statement.
Only hit it once and you'll only make one call.
Sprint's rom is ridiculously slow and laggy.
More peopel could probably help you out with specific problems with sprint's rom on sprintforums.com or somewhere like that. NOT that we don't want to help, but problems often have different levels of depth, if you know what I mean. Or root and get ever CRAZIER problems and then stick around here!
EDIT: that is, http://www.sprintusers.com/

rt1oo said:
you probably don't have very good service where you are, unless you deny that statement.
Only hit it once and you'll only make one call.
Sprint's rom is ridiculously slow and laggy.
More peopel could probably help you out with specific problems with sprint's rom on sprintforums.com or somewhere like that. NOT that we don't want to help, but problems often have different levels of depth, if you know what I mean. Or root and get ever CRAZIER problems and then stick around here!
EDIT: that is, http://www.sprintusers.com/
Click to expand...
Click to collapse
thanks, but i think its the phone, because now when I click the green button the phone comes up immediately but nothing on the screen works. Its almost like clicking an image no beeps nothing.
Below is more detail of my problem
Can someone help me. How come every so often I try to place a call their is a long delay.
For example I will push the green call button to bring up the phone. Then I will click on a name from my recently used numbers and I will click the number I want to call and it will highlight then nothing. After 10 to 15 seconds does it vibrate and place the call and go to the screen with the timer and the end button. If I get impatient and keep pressing the number (selection goes green for a second) nothing happens for 10 to 15 seconds then the call is placed and it will continue dialing, holding, and conference call as I try to talk to that person.
This delay also happens when I dial a number, and the number keypad is slightly sluggish when dialing.
Please note I a running Sprint Official OS2.1 and even though the Phone Application is sluggish outside phone mode the device seems to run when when using other internet. I am also getting strong bars and EV.
I would really appreciate your help; I just got this phone 2 days ago and really like it, but this one fault is killing it for me.
Please Help me.
Thanks
please somebody help me other than that i really like this phone.

integra144 said:
thanks, but i think its the phone, because now when I click the green button the phone comes up immediately but nothing on the screen works. Its almost like clicking an image no beeps nothing.
Below is more detail of my problem
Can someone help me. How come every so often I try to place a call their is a long delay.
For example I will push the green call button to bring up the phone. Then I will click on a name from my recently used numbers and I will click the number I want to call and it will highlight then nothing. After 10 to 15 seconds does it vibrate and place the call and go to the screen with the timer and the end button. If I get impatient and keep pressing the number (selection goes green for a second) nothing happens for 10 to 15 seconds then the call is placed and it will continue dialing, holding, and conference call as I try to talk to that person.
This delay also happens when I dial a number, and the number keypad is slightly sluggish when dialing.
Please note I a running Sprint Official OS2.1 and even though the Phone Application is sluggish outside phone mode the device seems to run when when using other internet. I am also getting strong bars and EV.
I would really appreciate your help; I just got this phone 2 days ago and really like it, but this one fault is killing it for me.
Please Help me.
Thanks
please somebody help me other than that i really like this phone.
Click to expand...
Click to collapse
Since you are not rooted and not running a custom ROM, this is probably not the best place to ask for help. You should call Sprint directly or check out the website/forum listed above.....

This lag is common on this particular phone. Just look at all the threads about dialer lag. 2.1 made the dialer lag even worse IMO. A custom ROM may or may not fix it for you.

i'm run Aloysius and Darchdroid I have the lag too. I dont know the problem i just wait.

i run DC and its laggy too... i bet its the dialer app...

that huge delay in actually dialing the number is an issue with all of the ROM's based on the official 2.1 (and the last leak as well I believe). No idea why it happens, but I hope a dev manages to figure out how to fix it soon, because it's the biggest annoyance for me

lag everywhere
i agree, the dialing lag is very annoying. also I have issues when im using the web browser while trying to tap on the url bar or in a search field the phone just hangs and doesn't bring up the keyboard.
while my buddie is already looking at a web page or search results on his very responsive palm pre webos im stuck waiting swearing at my phone lol.
But given all the things you can do to androids compaired to webos ill take the lag.

It was so bad for me that I took my phone into a sprint store and showed them how f'ed up it was. They said that it was happening a lot...evidently they have an internal forum where these issues get posted and the tech I talked to at the store said he saw a ton of posts referencing this same issue. They told me, however, that my phone passed diagnostics and that I could make and receive calls, to which I responded, "sure, I can make calls, but it barely functions as a phone." They sent me on my way, and I figured that was that until I got a text 2 days later saying that my replacement phone was in.
When I went to pick it up, the store rep said, "We'll have to reload the update for you" and I told him not to bother. Whatever issues 1.5 had, they were better than the enourmous issues with 2.1. Of course, as soon as I got it home, I rooted it (the 2.1 root came out the next day) and had 2.1 running quick as a fox anyway.

I have had the same issue, but have discovered one important thing by looking at the logs and just observing... This does not happen when using WiFi. I have a log showing that this problem is related to turning the radio off in order to make the call. For those who do not know, this is unique to CDMA in that it cannot use both data and voice at the same time. For some reason it is taking forever to turn data off in order to make the call. This has been reported to Flipz and he is looking into it, but until then I guess you just have to put up with it or go back to a 1.5 rom.

For those to say that the problem doesn't exist on rooted phones or that he should go somewhere else is not giving any good advise.
I have been rooted for several months and never really had any problems with an extremely long delay until recently. . I know if I am rebooting my phone I have to wait a little bit to do anything, even after Sense has finished loading or i will have the same problem. I'm sure you were not rebooting your phone when this happened.
Here was my experience 2 days ago...
I tried making a call and pressed on the contacts name. It was just sitting there. After 20 seconds it still wasn't calling, so I pressed the name again and after 15 more seconds it began calling the person. And then it started dialing again. I hit End Call and attempted to do it again. I had the same problem. I then rebooted my phone and waited 5 minutes and tried again and had the same results. In between pressing the contact and the phone actually calling it just sat on the contact screen. I have had the same ROM running on my phone for 3 weeks and this was the first problem I had like this.
At first I thought it was with Sprint, but it should have atleast gone to the calling screen and said dialing if it was even attempting to call.
If you have had this problem was it just stuck on the dialer/contact screen or was it on the screen that says dialing/calling?

It gets stuck on the dialer/contact screen. I had this problem slightly with 1.5, but it is far worse in 2.1 including all official 2.1-based roms. The problem is present in all 2.1 based versions of Fresh and Fresh Toast.

I had this problem on every 2.1 ROM. It went away with Fresh Toast and the 710 Kernel. Now the most lagg I get on the dialer is between 1 or 2 seconds. Before it could be 10 seconds before the call placed. I am extremely happy with that overclocked ROM. Try it out if you want.

[FROYO] No in-call sound after every update

Hi everybody.
I'm having this strange issue since FROYO update (first one that came with radio). Everytime I put a new update (or anything involving going to Recovery), when my phone boots up, I can get no sound during a call (I can't hear and can't be heard also) and more, the proximity sensor is not working either (screen remains lighted when close to ear).
If I put the phone on speaker, I can hear the other and I can be heard. Looks like the upper part of the phone is not working. The only solution I found until now is to turn the phone off, take out the battery for a minute or two and then, when I start the phone, everything is back on its track.
I've tried everything, going back to stock, getting the new (now old) FRF85b signed from Google (with radio in it). I received no errors during updates, I did wipe everthing, but the problem is still there.
Today I've updated to FRF91 and after the phone booted up, same problem.
Could be the radio of FROYO? Anyone else have this issue?
Regards,
Alin.

I'm having this exact same problem and I'm kind of freaking out because I have an unlocks bootloader and no warranty, however this just happened to Me today and I've been on froyo for almost two months

ok so i just solved my problem... by smacking the speaker end of my phone on my hand a few times..

Slow to wake up, slow to answer call

I just got an international Note 9 (snapdragon), updated to latest firmware, and I am finding it ridiculously slow to wake up once the screen is off, or to answer a call from that state. I went so far as to use no lockscreen, to bypass this, or to try with Always On Display or off, but it is the same. If I want to turn on the phone, whether from the power button, or the long-pressed Home button, it takes it some 1-2 seconds to come to life, and if I answer a call, even after hitting the answer button (or swiping), it takes another 2 seconds to actually let me talk to the person. I also cannot seem to answer calls with my headphones as I used to. I owned a Note 4 before this, which I loved, though it was growing long on the tooth, and never had any such issues. Am I doing something wrong?

Solved: firmware was defective
Subtleone said:
I just got an international Note 9 (snapdragon), updated to latest firmware, and I am finding it ridiculously slow to wake up once the screen is off, or to answer a call from that state. I went so far as to use no lockscreen, to bypass this, or to try with Always On Display or off, but it is the same. If I want to turn on the phone, whether from the power button, or the long-pressed Home button, it takes it some 1-2 seconds to come to life, and if I answer a call, even after hitting the answer button (or swiping), it takes another 2 seconds to actually let me talk to the person. I also cannot seem to answer calls with my headphones as I used to. I owned a Note 4 before this, which I loved, though it was growing long on the tooth, and never had any such issues. Am I doing something wrong?
Click to expand...
Click to collapse
So just an update: I managed to solve all the issues mentioned above. The firmware installed was Chinese, though multilanguage and with Gapps. Even reflashing it fresh from Sammobile did not solve it, and I was at wit's end. I then downloaded the latest one from Brazil (ZTO - non-operator specific), and lo and behold everything was working. I guess this was almost necessary since I bought it from a reseller for a really good price who claimed (correctly) the phone was in immaculate condition, without a mark anywhere (not even on the charging slot), all accessories, after being returned after 3 days. I had assumed it was someone who decided it was too big or the like, but now I see it was almost certainly the problems I had, and solved.