Database Develop

[Q] Stuck in Odin when flashing kernel

I was following the overcome guide and when i came to step 8/9 (flash overcome kernel) it didn't work, so then i chose the same pit which you use in a previous step and also the kernel and now it worked with the pit but not the kernel. i got stuck in download mode and tried to flash only kernel again but it didn't work not it got stuck on ConnectionSetup... or something like that. I think it couldn't find the device, i shut down odin and took out the micro-sd card which someone said could cause problems but it still didn't work. now i'm stuck at a screen like this: picture of phone .. ! .. picture of computer. I guess it means it can't connect to the computer. Anyone know what to do? I've tried searching the forums and tried some different stuff but haven't succeded.
Edit: Seems like i can use odin even though i don't get into the download mode, will update soon. Seems to work correctly, i'll give the flashing another try and i will make sure to cross the right boxes and so on.
Edit2: This time i checked that i had all the correct things crossed in Odin but when i try to flash the kernel it fails. what should i do? i come from gingerbread 2.3.3 (re-stocked) so it can't be the bootloader right?
Edit3: This is what i get when i try to flash the kernel:
<ID:0/036> Added!!
<ID:0/036> Odin v.3 engine (ID:36)..
<ID:0/036> File analysis..
<ID:0/036> SetupConnection..
<ID:0/036> Initialzation..
<ID:0/036> Get PIT for mapping..
<ID:0/036> Firmware update start..
<ID:0/036> ‹
<ID:0/036> NAND Write Start!!
<ID:0/036>
<ID:0/036> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Edit4: From my research it seems i have the same problem as people hade with the signed/locked bootloaders on froyo, however i'm running 2.3.3 and the thread specifically said not to use their patch so i have no idea of how to solve this. Help would be very appreciated.
Edit5: finally works, thanks to this: http://forum.xda-developers.com/showthread.php?t=1324052

[Q] I messed up my girlfriend’s GalaxyS ….

Pleaseeee help ….. I am stuck in the downloading mode
Dear experts
I have messed up my girlfriend’s GalaxyS ….
I rooted her phone by following ChainFire’s thread http://forum.xda-developers.com/showthread.php?t=1056334
Followed every step and rooted phone ….Things went smooth…then suddenly phone keep dying in few hours even if its fully charged …. I thought of reapeting the whole process incase I made mistake at any stage
I run the Odin v1.85, selected “CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.tar” file in PDA and click on start…..Suddenly my phone died and Odin said successful 0/ Failed 1
I got in panic mode and start the whole process again…. Since then phone is in Downloading mode.....
Then Magic happen and i got following msg frm Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/004> Added!!
Then as per instruction after phone get rebooted i run superoneclick and click on Root... Its been almost 2 hours and i am having following msg on superoneclick...
Running psneuter....
Pleaseeeeeeeeeeeeeeeeeeeeeeee help me to get it up & running
Waiting for experts to save my relationship
Pleaseeeee help me guys
What to do next?

If you flash cf root kernel you will get root.You don't need superone click.
Try reboot your phone it should work.
Sent from Galaxy on latest nightly with neo kernel

First of all... what was the original firmware?
Second: I hope you have not messed with repartition and bootloader?

yeah, check what version she's running and flash cf-root, since you allready are capable of flashing with Odin you dont need one-click root.
Sent from my GT-I9000 using XDA App

Dear all,
Many Many thanks for your time & reply...
I did reboot at least 3 times... Still having same problem... very strange problem
I have fully charge the phone. Everything is working fine, did my msgs, reply to email, took few pics...upload them....SO far so good, happy happy happyy so put the phone on side & had dinner, picked up phone again and it was off...have to press power button long enough to start the phone... Works fine, shows little drain on battery..put it aside for while and it will be off strangely... Have to restart it by pressing power button on for long enough and it does start, work well and once put it on side for while it goes off .... (My girlfriend is mad at me ;-p ... Dont know how to solve this )
Please help guys ... Here is the required details...
Original-->
Firmware 2.3.3
Kernel 2.6.35.7 I9000xxJV0-CL182937
Build number Gingerbread.XXJVO
Does this info will help you to find the fault?
Really need help...
Many Thanks

Reflash the stock rom again just to be on the safe side.

My Note after upgrading to ics gets no audio on calls

Hi All,
I have been trying to find an answer for the past 6 hours, my baseband is n7000xxlp1, kernal is [email protected] #3 and build is IML74k my phone works great the problem is when i make or receive calls I have no audio and the person on the other end gets static. Im thinking it is a radio issue though I cant make heads or tails of which radio to flash. Sorry for being newbish but could someone please help me and let me know how to fix this ?
Thanks so much.

blo0kid said:
Hi All,
I have been trying to find an answer for the past 6 hours, my baseband is n7000xxlp1, kernal is [email protected] #3 and build is IML74k my phone works great the problem is when i make or receive calls I have no audio and the person on the other end gets static. Im thinking it is a radio issue though I cant make heads or tails of which radio to flash. Sorry for being newbish but could someone please help me and let me know how to fix this ?
Thanks so much.
Click to expand...
Click to collapse
Try flashing baseband lp6

Will do any leads where i can find the lp6 baseband searching is not helping me out.
Thanks in advance

Here's the latest LP6 modem: http://forum.xda-developers.com/showpost.php?p=24787908&postcount=309 Just flash with CWM Recovery.
But why not flash a LP6 based rom? Like AlBa or TheMIDTeam's B&G?

The ICS update id did is the hacked 4.03 one via odin I had root on the phone before doing it. The guide i followed is www . androidaddicted . com / samsung-3/how-to-upgrade-samsung-galaxy-note-gt-n7000-to-ice-cream-sandwich-ics-4-0-3-n7000xxlp1-411.html so i dont have CWM on it only download mode, should i reflash to a stock 2.3.6 rom ? If so I have no idea where this phone is from (region wise) is there a way to tell so i flash the correct stock rom?
Thanks.

I just tried to flash the LP6 modem in odin and get
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
???

blo0kid said:
I just tried to flash the LP6 modem in odin and get
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
???
Click to expand...
Click to collapse
Dontflsh via Odin flash via cwm recovery

I dont have CWM only odin on the phone, when i turn it on with vol down i get download mode, if i turn it on with vol up and the center button i get android system recovery, can i rename the modem file something where it will work with the apply update from external storage option ?

I put the modem zip on a microsd and tried to use android recovery to flash and it says signature verification failed

So i just downgraded to 2.3.6 and will properly root and install CWM on it and then do the ics install thanks, 2.3.6 works like a champ with the phone calls.

Yeah, then it's definately the modem file that messes things up.
With CMWR installed you can flash any rom you like in the developers section. The ICS roms I've tried are imilka's CM9v2 and ICS Stunner 5.0 Beta. CM9 was absolutely great but I like the added functionality that Stunner brings to the phone. Both roms are based on open source Android so no Samsung apps, if you want the s-pen apps like taking a screenshot, s-memo, s-note etc. then you're better off flashing a rom based on the LP6 leak.

Cool ill look into those roms thanks for all the help.

Hi all,
sorry if this is stupid because im kind of new to this.
I am having a similar problem with my galaxy note gt-n7000. its upgraded to ICS (no root, no custom flashed roms etc) from my carrier (Vodafone AU) and it was fine but after a week it also gets no call audio..
When i attempt a call, it connects successfully, (Although it doesn't make any calling sound) and I cannot hear the other party, but they can hear me
Im pretty sure its not a hardware issue, as other applications such as viber and tango both work fine.
Any ideas would be much appreciated. thanks in advance.

Can't downgrade from XXLB2?

Hi, i tried to downgrade from XXLB2 to KJ1 with Odin, but it didn't work. NAND write error. Now i am stuck. What can i do?

Hi, where is download link of your new Rom ?
facepalms

Blackflip said:
Hi, i tried to downgrade from XXLB2 to KJ1 with Odin, but it didn't work. NAND write error. Now i am stuck. What can i do?
Click to expand...
Click to collapse
you can start by posting in the correct place... this should go in Q and A not development...
Here this may help you
http://forum.xda-developers.com/showthread.php?t=1318423
or maybe this might
http://forum.xda-developers.com/showthread.php?t=1321268

Moved To Q&A​
Please post all questions in the Q&A section​

sorry for posting in the wrong forum.
So i have tried everything:
- downloaded and tried flashing 2 different stock ROM's from Switzerland XXKK5 and XXLA4 with odin. no avail:
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried installing the AbyssNotekernel42CWTouchOriginalLogo.tar
got into the menu and installed Superuser-3.0.6-efgh-signed.zip
but my SGN still won't boot.
Can someone PLEASE tell me what i am doing wrong?
I just want to go back to stock ROM now since this has been a rotten experience for me.
I know that my SGN is only Soft-bricked, i can still go into Download mode, but Odin will just not take any ROM that i throw at it.
Thank you for your help!

Would be really great if someone could help! Please!

anyone here?

I'm kinda having a similar issue. If i find a way around it I'll tell you.

Blackflip said:
sorry for posting in the wrong forum.
So i have tried everything:
- downloaded and tried flashing 2 different stock ROM's from Switzerland XXKK5 and XXLA4 with odin. no avail:
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried installing the AbyssNotekernel42CWTouchOriginalLogo.tar
got into the menu and installed Superuser-3.0.6-efgh-signed.zip
but my SGN still won't boot.
Can someone PLEASE tell me what i am doing wrong?
I just want to go back to stock ROM now since this has been a rotten experience for me.
I know that my SGN is only Soft-bricked, i can still go into Download mode, but Odin will just not take any ROM that i throw at it.
Thank you for your help!
Click to expand...
Click to collapse
Right click odin and run as administrator
Sent from my GT-N7000 using xda premium

I finally found a way... I downloaded the 3 Part KJ1 Firmware (N7000OXAKJ1)
then i put into Odin (run as Admin of course)
- KERNEL_N7000XXKJ1_CL627135_REV02_eng_mid_ship.tar.md5
into the "Bootloader"
- MODEM_N7000XXKJ1_REV_05_CL1067428.tar.md5
into the "Phone"
- GT-N7000-MULTI-CSC-OXAKJ1.tar.md5
into "CSC"
and flashed my SGN.
Then i did it again but this time i also put the
- CODE_N7000XXKJ1_CL627135_REV02_user_low_ship.tar.md5
or the
- N7000XXKKA_N7000OXXKK5_N7000XXKK5_HOME.tar.md5
into "PDA"
finally my phone booted up again.
after that it was pretty straightforward with updating to ICS Stunner.

N7000 xxlb2 problem
how to root n7000 xxlb2? SuperUser will not install at all.
Can man say what or how to do it? i'll be pleased to hear from you guys.
Thx a lot.

[Q] how can I repair wrong installed KERNEL on GT-I9220 - Help please!

Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...

Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.

here the ODIN log for 1.87 but same for 1.85
nokiamodeln91 said:
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
Click to expand...
Click to collapse
Thanks for having a look into this.
So Windows recognizes the following drivers if it is in Download mode
SAMSUNG Mobile USB CDC Composite Device
SAMSUNG Mobile USB Modem
And ODIN 1.87 recognizes the device under ID:COM yellow 0:[com3]
<ID:0/003> Added!!
after START PIT and Bootloader
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Phone does not do anything. :crying:
I assume that the wrong KERNEL is causing this missbehaviour!?
what to do now? Any idea?
Thx 1000times
So how do I first get a new fitting Kernel?

Le_Tifou said:
Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Click to expand...
Click to collapse
You would better restock your note.
You will need a rom with four files: .pit , .pda, modem and csc
The rom MUST be made for your phone and you may find it in samfirmware.com.
If your phone can't enter dowload mode, you'll need a USB JIG.
Hope this can help.
After reading the Odin resulst, try to flash only PDA as your error is comming from the PIT file.
Uncheck "repartition"

First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin

Is that the right file: 165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip ??
nokiamodeln91 said:
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Click to expand...
Click to collapse
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx

Even if you get a whole rom, it's good. Flash with odin without the pit

Le_Tifou said:
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Click to expand...
Click to collapse
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:

Thanks KERNEL has been changed back to original
lionelia said:
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Click to expand...
Click to collapse
Thanks both of you!!!
Odin 1.87 worked so far. And immediately Windows recognized the phone as GT-I9220 again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9220ZCLPL_I9220ZCLPI_I9220OZHLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I got after disconneting and taking out battery and restart -
got into mode VOL-up + power-on + center key
and made a factory reset as well as deleted cache
Modell: GT-I9220
Android version: 4.0.4
Baseband: I9220ZCLPI
KERNEL: 3.0.15 - ...
Build: IMM76D.ZCLPL
When I unpacked the ZIP file there was an additioal file ss_DL.dll what shall I do with it?
now it works thanks to you!
Great!

Nothing to do with the the dll file. Congrats for a working phone.

Rooting failure
nokiamodeln91 said:
Nothing to do with the the dll file. Congrats for a working phone.
Click to expand...
Click to collapse
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing