Hi, i tried to downgrade from XXLB2 to KJ1 with Odin, but it didn't work. NAND write error. Now i am stuck. What can i do?
Hi, where is download link of your new Rom ?
facepalms
Blackflip said:
Hi, i tried to downgrade from XXLB2 to KJ1 with Odin, but it didn't work. NAND write error. Now i am stuck. What can i do?
Click to expand...
Click to collapse
you can start by posting in the correct place... this should go in Q and A not development...
Here this may help you
http://forum.xda-developers.com/showthread.php?t=1318423
or maybe this might
http://forum.xda-developers.com/showthread.php?t=1321268
Moved To Q&A
Please post all questions in the Q&A section
sorry for posting in the wrong forum.
So i have tried everything:
- downloaded and tried flashing 2 different stock ROM's from Switzerland XXKK5 and XXLA4 with odin. no avail:
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried installing the AbyssNotekernel42CWTouchOriginalLogo.tar
got into the menu and installed Superuser-3.0.6-efgh-signed.zip
but my SGN still won't boot.
Can someone PLEASE tell me what i am doing wrong?
I just want to go back to stock ROM now since this has been a rotten experience for me.
I know that my SGN is only Soft-bricked, i can still go into Download mode, but Odin will just not take any ROM that i throw at it.
Thank you for your help!
Would be really great if someone could help! Please!
anyone here?
I'm kinda having a similar issue. If i find a way around it I'll tell you.
Blackflip said:
sorry for posting in the wrong forum.
So i have tried everything:
- downloaded and tried flashing 2 different stock ROM's from Switzerland XXKK5 and XXLA4 with odin. no avail:
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried installing the AbyssNotekernel42CWTouchOriginalLogo.tar
got into the menu and installed Superuser-3.0.6-efgh-signed.zip
but my SGN still won't boot.
Can someone PLEASE tell me what i am doing wrong?
I just want to go back to stock ROM now since this has been a rotten experience for me.
I know that my SGN is only Soft-bricked, i can still go into Download mode, but Odin will just not take any ROM that i throw at it.
Thank you for your help!
Click to expand...
Click to collapse
Right click odin and run as administrator
Sent from my GT-N7000 using xda premium
I finally found a way... I downloaded the 3 Part KJ1 Firmware (N7000OXAKJ1)
then i put into Odin (run as Admin of course)
- KERNEL_N7000XXKJ1_CL627135_REV02_eng_mid_ship.tar.md5
into the "Bootloader"
- MODEM_N7000XXKJ1_REV_05_CL1067428.tar.md5
into the "Phone"
- GT-N7000-MULTI-CSC-OXAKJ1.tar.md5
into "CSC"
and flashed my SGN.
Then i did it again but this time i also put the
- CODE_N7000XXKJ1_CL627135_REV02_user_low_ship.tar.md5
or the
- N7000XXKKA_N7000OXXKK5_N7000XXKK5_HOME.tar.md5
into "PDA"
finally my phone booted up again.
after that it was pretty straightforward with updating to ICS Stunner.
N7000 xxlb2 problem
how to root n7000 xxlb2? SuperUser will not install at all.
Can man say what or how to do it? i'll be pleased to hear from you guys.
Thx a lot.
Related
Hi all
I just flashed my Galaxy S using Odin and the latest Hardcore v1.2 - my phone is now stuck at the Galaxy S screen (and not going anywhere!). I've pulled the battery and tried to restart normally, but no luck. Odin ran perfectly well with the following results:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Please can someone help in guiding me on what to do to get my phone up and running again. I can get the recovery mode working, but dont know which option to select.
Any help would be appreciated!
Thanks
Looks like you just flashed a kernel. Your missing the rom
Sent from my Emotionless Beast of an ACS Epic using the XDA App
Hi, please can you let me know where do I get the ROM from and what I need to do with it? I downloaded the first zip file from Hardcore's post only... There was no links to a ROM. I am running (was running) a UK stock 2.1 Galaxy S.
Thanks for any advice / help...really need to get this working again...
S4chin said:
Hi, please can you let me know where do I get the ROM from and what I need to do with it? I downloaded the first zip file from Hardcore's post only... There was no links to a ROM. I am running (was running) a UK stock 2.1 Galaxy S.
Thanks for any advice / help...really need to get this working again...
Click to expand...
Click to collapse
I'm on the epic so idk your forums. Hopefully someone can help you with that part
Sent from my Emotionless Beast of an ACS Epic using the XDA App
Hi - I've managed to load a standard 2.1 kernel back onto my phone, so it's up and running again...phew...
However, I do still want to get onto 2.2 and Hardcore's recovery.
What's the best way to get onto a stock Froyo so I can then reflash the Hardcore kernel?
Thanks all...sorry for all the Noob questions...
I was following the overcome guide and when i came to step 8/9 (flash overcome kernel) it didn't work, so then i chose the same pit which you use in a previous step and also the kernel and now it worked with the pit but not the kernel. i got stuck in download mode and tried to flash only kernel again but it didn't work not it got stuck on ConnectionSetup... or something like that. I think it couldn't find the device, i shut down odin and took out the micro-sd card which someone said could cause problems but it still didn't work. now i'm stuck at a screen like this: picture of phone .. ! .. picture of computer. I guess it means it can't connect to the computer. Anyone know what to do? I've tried searching the forums and tried some different stuff but haven't succeded.
Edit: Seems like i can use odin even though i don't get into the download mode, will update soon. Seems to work correctly, i'll give the flashing another try and i will make sure to cross the right boxes and so on.
Edit2: This time i checked that i had all the correct things crossed in Odin but when i try to flash the kernel it fails. what should i do? i come from gingerbread 2.3.3 (re-stocked) so it can't be the bootloader right?
Edit3: This is what i get when i try to flash the kernel:
<ID:0/036> Added!!
<ID:0/036> Odin v.3 engine (ID:36)..
<ID:0/036> File analysis..
<ID:0/036> SetupConnection..
<ID:0/036> Initialzation..
<ID:0/036> Get PIT for mapping..
<ID:0/036> Firmware update start..
<ID:0/036> ‹
<ID:0/036> NAND Write Start!!
<ID:0/036>
<ID:0/036> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Edit4: From my research it seems i have the same problem as people hade with the signed/locked bootloaders on froyo, however i'm running 2.3.3 and the thread specifically said not to use their patch so i have no idea of how to solve this. Help would be very appreciated.
Edit5: finally works, thanks to this: http://forum.xda-developers.com/showthread.php?t=1324052
Pleaseeee help ….. I am stuck in the downloading mode
Dear experts
I have messed up my girlfriend’s GalaxyS ….
I rooted her phone by following ChainFire’s thread http://forum.xda-developers.com/showthread.php?t=1056334
Followed every step and rooted phone ….Things went smooth…then suddenly phone keep dying in few hours even if its fully charged …. I thought of reapeting the whole process incase I made mistake at any stage
I run the Odin v1.85, selected “CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.tar” file in PDA and click on start…..Suddenly my phone died and Odin said successful 0/ Failed 1
I got in panic mode and start the whole process again…. Since then phone is in Downloading mode.....
Then Magic happen and i got following msg frm Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/004> Added!!
Then as per instruction after phone get rebooted i run superoneclick and click on Root... Its been almost 2 hours and i am having following msg on superoneclick...
Running psneuter....
Pleaseeeeeeeeeeeeeeeeeeeeeeee help me to get it up & running
Waiting for experts to save my relationship
Pleaseeeee help me guys
What to do next?
If you flash cf root kernel you will get root.You don't need superone click.
Try reboot your phone it should work.
Sent from Galaxy on latest nightly with neo kernel
First of all... what was the original firmware?
Second: I hope you have not messed with repartition and bootloader?
yeah, check what version she's running and flash cf-root, since you allready are capable of flashing with Odin you dont need one-click root.
Sent from my GT-I9000 using XDA App
Dear all,
Many Many thanks for your time & reply...
I did reboot at least 3 times... Still having same problem... very strange problem
I have fully charge the phone. Everything is working fine, did my msgs, reply to email, took few pics...upload them....SO far so good, happy happy happyy so put the phone on side & had dinner, picked up phone again and it was off...have to press power button long enough to start the phone... Works fine, shows little drain on battery..put it aside for while and it will be off strangely... Have to restart it by pressing power button on for long enough and it does start, work well and once put it on side for while it goes off .... (My girlfriend is mad at me ;-p ... Dont know how to solve this )
Please help guys ... Here is the required details...
Original-->
Firmware 2.3.3
Kernel 2.6.35.7 I9000xxJV0-CL182937
Build number Gingerbread.XXJVO
Does this info will help you to find the fault?
Really need help...
Many Thanks
Reflash the stock rom again just to be on the safe side.
Hi All,
I have been trying to find an answer for the past 6 hours, my baseband is n7000xxlp1, kernal is [email protected] #3 and build is IML74k my phone works great the problem is when i make or receive calls I have no audio and the person on the other end gets static. Im thinking it is a radio issue though I cant make heads or tails of which radio to flash. Sorry for being newbish but could someone please help me and let me know how to fix this ?
Thanks so much.
blo0kid said:
Hi All,
I have been trying to find an answer for the past 6 hours, my baseband is n7000xxlp1, kernal is [email protected] #3 and build is IML74k my phone works great the problem is when i make or receive calls I have no audio and the person on the other end gets static. Im thinking it is a radio issue though I cant make heads or tails of which radio to flash. Sorry for being newbish but could someone please help me and let me know how to fix this ?
Thanks so much.
Click to expand...
Click to collapse
Try flashing baseband lp6
Will do any leads where i can find the lp6 baseband searching is not helping me out.
Thanks in advance
Here's the latest LP6 modem: http://forum.xda-developers.com/showpost.php?p=24787908&postcount=309 Just flash with CWM Recovery.
But why not flash a LP6 based rom? Like AlBa or TheMIDTeam's B&G?
The ICS update id did is the hacked 4.03 one via odin I had root on the phone before doing it. The guide i followed is www . androidaddicted . com / samsung-3/how-to-upgrade-samsung-galaxy-note-gt-n7000-to-ice-cream-sandwich-ics-4-0-3-n7000xxlp1-411.html so i dont have CWM on it only download mode, should i reflash to a stock 2.3.6 rom ? If so I have no idea where this phone is from (region wise) is there a way to tell so i flash the correct stock rom?
Thanks.
I just tried to flash the LP6 modem in odin and get
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
???
blo0kid said:
I just tried to flash the LP6 modem in odin and get
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
???
Click to expand...
Click to collapse
Dontflsh via Odin flash via cwm recovery
I dont have CWM only odin on the phone, when i turn it on with vol down i get download mode, if i turn it on with vol up and the center button i get android system recovery, can i rename the modem file something where it will work with the apply update from external storage option ?
I put the modem zip on a microsd and tried to use android recovery to flash and it says signature verification failed
So i just downgraded to 2.3.6 and will properly root and install CWM on it and then do the ics install thanks, 2.3.6 works like a champ with the phone calls.
Yeah, then it's definately the modem file that messes things up.
With CMWR installed you can flash any rom you like in the developers section. The ICS roms I've tried are imilka's CM9v2 and ICS Stunner 5.0 Beta. CM9 was absolutely great but I like the added functionality that Stunner brings to the phone. Both roms are based on open source Android so no Samsung apps, if you want the s-pen apps like taking a screenshot, s-memo, s-note etc. then you're better off flashing a rom based on the LP6 leak.
Cool ill look into those roms thanks for all the help.
Hi all,
sorry if this is stupid because im kind of new to this.
I am having a similar problem with my galaxy note gt-n7000. its upgraded to ICS (no root, no custom flashed roms etc) from my carrier (Vodafone AU) and it was fine but after a week it also gets no call audio..
When i attempt a call, it connects successfully, (Although it doesn't make any calling sound) and I cannot hear the other party, but they can hear me
Im pretty sure its not a hardware issue, as other applications such as viber and tango both work fine.
Any ideas would be much appreciated. thanks in advance.
Hello guys,
i'm new in the forum and this is my first entry.
I got quite a complicated situation with my phone... i try to describe this as good as possible.
My brother gave his old phone, a GT-I9070P with GB (v2.3.6) on it and i wanted to upgrade it to a newer firmware. Unfortunatly I haven't had an Android phone in a long time (2 years or so).
Nevertheless i wanted to upgrade it to 4.1.2 stock and use NFC (for programming a little bit).
I asked the father of a friend of mine to upgrade it because he has much more expirience with flashing and all that stuff ..
He said that this is no problem and after a few days he gave it back to me and told me that there were some difficulties but he did it.
Now i got my phone with JB 4.1.2 but when i tried it out, it didn't recognize the SIM card.
I gave it back to him and said, that the SIM wasn't working.
We found out that he flashed a I9070 stock and that the IMEI was "deleted" but he knows a guy how can fix this.
I read in a few forums about this problems and found out that this has got something to do with the modem (baseband / IMEI).
When i got my phone back, the SIM was recognized again.
But now i got a GT-I9070P with I9070 stock firmware (-> NFC not working)
Today i tried to flash two I9070P stock roms with Odin 3.09 but it didn't work out.
(I can post the LOG from Odin if you want)
When i flashed the I9070 stock again, it worked perfectly.
Sorry for the long post but now my actual question:
Is it possible to get a full functional I9070P with working NFC back on the phone?
(To be honest: i don't have any backups or /lib/tee - folders)
Thank you very much for helping me out!
cheers,
MonkeySon
MonkeySon said:
Hello guys,
i'm new in the forum and this is my first entry.
I got quite a complicated situation with my phone... i try to describe this as good as possible.
My brother gave his old phone, a GT-I9070P with GB (v2.3.6) on it and i wanted to upgrade it to a newer firmware. Unfortunatly I haven't had an Android phone in a long time (2 years or so).
Nevertheless i wanted to upgrade it to 4.1.2 stock and use NFC (for programming a little bit).
I asked the father of a friend of mine to upgrade it because he has much more expirience with flashing and all that stuff ..
He said that this is no problem and after a few days he gave it back to me and told me that there were some difficulties but he did it.
Now i got my phone with JB 4.1.2 but when i tried it out, it didn't recognize the SIM card.
I gave it back to him and said, that the SIM wasn't working.
We found out that he flashed a I9070 stock and that the IMEI was "deleted" but he knows a guy how can fix this.
I read in a few forums about this problems and found out that this has got something to do with the modem (baseband / IMEI).
When i got my phone back, the SIM was recognized again.
But now i got a GT-I9070P with I9070 stock firmware (-> NFC not working)
Today i tried to flash two I9070P stock roms with Odin 3.09 but it didn't work out.
(I can post the LOG from Odin if you want)
When i flashed the I9070 stock again, it worked perfectly.
Sorry for the long post but now my actual question:
Is it possible to get a full functional I9070P with working NFC back on the phone?
(To be honest: i don't have any backups or /lib/tee - folders)
Thank you very much for helping me out!
cheers,
MonkeySon
Click to expand...
Click to collapse
"But now i got a GT-I9070P with I9070 stock firmware" - your phone would be hardbricked if you flashed I9070 firmware on I9070P, so I suppose that is not the case. Did you try to do factory reset after flashing stock firmware for I9070. P.S. We do not have any custom ROM with NFC support as I know.
shut_down said:
"But now i got a GT-I9070P with I9070 stock firmware" - your phone would be hardbricked if you flashed I9070 firmware on I9070P, so I suppose that is not the case. Did you try to do factory reset after flashing stock firmware for I9070. P.S. We do not have any custom ROM with NFC support as I know.
Click to expand...
Click to collapse
Thank you for the quick response.
Hm... but this is exactly whats the case right now...
The back of the phone says "I9070P" and i have the backcover with the NFC "antenna" but the the device information says "Model: GT-I9070... Basebandversion: I9070XXLQG"
Okay, i will try that
But even if this works, wouldn't there the problem with the SIM-recognition again?
I know, that's the reason why i wanted to flash the newest stock rom.
I'd try to flash 9070P lib/tee/folder (use temporary recovery or flash any cocore kernel beforehand) - to be found here: http://forum.xda-developers.com/showthread.php?t=2191628 (use version for stock ROMs)
adamuadamu said:
I'd try to flash 9070P lib/tee/folder (use temporary recovery or flash any cocore kernel beforehand) - to be found here: http://forum.xda-developers.com/showthread.php?t=2191628 (use version for stock ROMs)
Click to expand...
Click to collapse
If i get it right you suggest:
- flash CoCore incl. recovery (for I9070)
- install the I9070P tee folder zip on my 9070 stock
What should theoretically happen then - would i be able to use NFC or flash the 9070P stock rom then?
But now i got a GT-I9070P with I9070 stock firmware (-> NFC not working)
Click to expand...
Click to collapse
Maybe the guy changed the board and you have i9070 without p/nfc ....
MonkeySon said:
If i get it right you suggest:
- flash CoCore incl. recovery (for I9070)
- install the I9070P tee folder zip on my 9070 stock
What should theoretically happen then - would i be able to use NFC or flash the 9070P stock rom then?
Click to expand...
Click to collapse
Try to flash cocore for I9070P as your phone is with NFC,then flash that tee folder zip and see if its working.If it is,download stock rom for P vesion from sammobile.com .I dont remember if flashing stock from there will increase count,but you can reset it later.
@shut_down
Now i did a factory reset after flashing the 9070 stock but i got the same error as before while flashing 9070P stock
@Tarola
Well this could possibly be but i don't think that, i trust them
@Force
Okey thanks, i will try that and report later
BTW: flashing stock also increases counter.
well, lets see..
i installed CoCore-EP-8.6-CWM - everything ok
installed 9070PJBlibteefolder.zip via recovery - no problem
restart the phone - restart to download mode and try to flash P rom.
Exact same error as before, in addition to that, the phone is now unable to read my SIM again
this is my Odin log if somebody is interested:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070PXXLPJ_I9070PNRJLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.md5
<ID:0/004> NAND Write Start!!
<ID:0/004> hidden.img.md5
<ID:0/004> kernel.bin.md5
<ID:0/004> kernel2.bin.md5
<ID:0/004> normal.bin.md5
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
MonkeySon said:
well, lets see..
i installed CoCore-EP-8.6-CWM - everything ok
installed 9070PJBlibteefolder.zip via recovery - no problem
restart the phone - restart to download mode and try to flash P rom.
Exact same error as before, in addition to that, the phone is now unable to read my SIM again
this is my Odin log if somebody is interested:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070PXXLPJ_I9070PNRJLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.md5
<ID:0/004> NAND Write Start!!
<ID:0/004> hidden.img.md5
<ID:0/004> kernel.bin.md5
<ID:0/004> kernel2.bin.md5
<ID:0/004> normal.bin.md5
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Odin does not complete instalation. It stuck at installing normal.bin.md5
shut_down said:
Odin does not complete instalation. It stuck at installing normal.bin.md5
Click to expand...
Click to collapse
yeah... but does anyone know why it stuck?
i don't think it would be the rom.. because this was the case with every 9070P rom i tried so far.
this whole thing is a little mystrey to me to be honest
EDIT:
I got my IMEI and SIM functionality back by flashing the 9070 stock again.
Just in case someone wants to know
I think i'm gonna ask the guy who did this for me how he achieved it, that the phone thinks its another model
MonkeySon said:
yeah... but does anyone know why it stuck?
i don't think it would be the rom.. because this was the case with every 9070P rom i tried so far.
this whole thing is a little mystrey to me to be honest
EDIT:
I got my IMEI and SIM functionality back by flashing the 9070 stock again.
Just in case someone wants to know
I think i'm gonna ask the guy who did this for me how he achieved it, that the phone thinks its another model
Click to expand...
Click to collapse
Only thing that I can tell you now is that you are lucky that your phone was not hardbricked.