Database Develop

[Q] My note is Stuck on Galaxy Note GT-N7000 on boot

Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess

clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)

Balbaroth said:
Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess
Click to expand...
Click to collapse
Same thing happen me too, i was flashing KL3 from CM9 build, even if flash through PC odin also i got Samsung screen boot loop. then i did clean wipe, everything went fine after wipe.

dr.ketan said:
clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)
Click to expand...
Click to collapse
did cleared the cache ,
and the dalvic cache ( which says no such files or directory )
after i tried the wipe data , still no success...
im stuck on Samsung Galaxy note GT-N7000 logo ,
is there any particular order you have to do to restore ?
Ranjan : i dont think my note boot loop as ive experienced on rocket rom a few times hehe , its just stuck at the black screen with the white Samsung Galaxy note GT-N7000 written on it when i power up
or if im too dumb to solve this , i would send it to repairs but cant find any place nearby , you guys know a place that do that kind of stuff ?
i appreciate the help thanks guys

You shud try to reflash it
Sent from my GT-N7000 using xda premium

dr.ketan said:
You shud try to reflash it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
you mean reflash using odin ?
when i use odin it download well it says no errors and reboot but still stuck , unless there is others ways beside odin
also i wanted to say when my root and cmw went fine i did a back up on it and it worked before , each time i try to restore it in the end at the data it says :
.android_secure.img not found and its bypassing that part
but says its done after , but doesnt boot too

Pull out the battery and replace after 10 seconds, then try flashing different ROM using PC Odin. while flashing do not Tick Re-partition and do not attach pit file.

If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.

SpecialStar said:
If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.
Click to expand...
Click to collapse
You Should be more specific
Flashing ANY Stock ROM with PC odin, don't raise counter.
Your reply shud be flashing custom ROM with PC odin counter will raise.
not ANOTHER

Right, sorry forget to mention
So he should just flash a STOCK ROM with Odin

thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair

Balbaroth said:
thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair
Click to expand...
Click to collapse
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.

ranjan.alva said:
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.
Click to expand...
Click to collapse
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone

Balbaroth said:
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone
Click to expand...
Click to collapse
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
did you install any custom ROM on it??

ranjan.alva said:
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
Click to expand...
Click to collapse
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory

Balbaroth said:
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory
Click to expand...
Click to collapse
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck

ranjan.alva said:
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck
Click to expand...
Click to collapse
ok will try LA3 ,
we are talking about this one right ?
N7000XXLA3 --------2.3.6------- 2012 January---N7000OXALA3--------------------Open Europe-----------------------
i found it using Dr.ketan signature
( huge thanks for the tutorial and the quick access to note roms )
im crossing my fingers and will keep you updated
, if by any chance it doesnt work ,and that i have to fix it , can you tell me where they service notes , in canada montreal its not even out yet lol

i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin

Richy99 said:
i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin
Click to expand...
Click to collapse
okay i flashed the la3 rom and still stuck lol darn ill try la4 then ,
it succeeded in odin pc and on the phone still says samsung official
im really out of options i guess , unreal im beginging to think it has others issues
is this place reliable for repairs ? http://repair-my-device.com or any other suggestions i cant find nothing beside that
EDIT : okay i tried the LA4 still doesnt boot up and stuck on the black screen with the samsung galaxy note gt-n7000 unless i go to cwm or download mode odin i cant do anything else ,
i was reading stuff and i was wondering if i jig could help ?

Was on a completely rooted Midnote.
wanted to try rocketrom ics. So went to recovery and flashed v 1.4, did a complete wipe before and after, but after that, the recovery module became unresponsive, so I force rebooted and the phone was stuck on boot screen "Samsung Galaxy Note 7000".
So I used PC odin and tried to flash the KL3 ROM but was stuck at factoryfs.img. Tried LA5 too, but same situation. Kindly help.
I am from Pune, India.

Help! Phone won't start!!

Hi all,
I was on the UK Stock 4.03 + Root....
I was trying to connect to a Blue-tooth Device today and the phone was frozen, so I turned it off....
When I tried to turn it back on...it won't go pass the "Samsang Galaxy Note" screen....(it would restart it self every time it reaches that screen)
I tried flashing it to the 4.0.4 German Stock via Odin...and the problem is still there....
is my phone BRICKED??
Please HELP~~!
THANKS!

Forgot to mentioned that when I was trying to reboot the phone for the first time....I had a USB Stick plugged into the phone...dunno if that was the cause of the problem

You said tried to flash 4.0.4, that is insufficient information
whether it was successfull or not?
do you rememeber wat exactly last msg ?

Did u try to completely remove the battery then reflash again stock ics through odin?
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗

Yeah...I did a flash of this Stock ROM "N7000XXLRG" from this page: http://forum.xda-developers.com/showthread.php?t=1424997.
The flash was SUCCESSFUL by Odin. However, When the phone rebooted after the flash the problem is still there (phone keep restarting once it reaches the "Samsung Galaxy Note" screen)

btw.. this is the log of the flash in Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
<ID:0/004> NAND Write Start!!
<ID:0/004> zImage
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!

Also...when I am trying to get into recovery mode....it shows the pic of the Android bot lying on the ground with a red triangle??

It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.

dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
Thanks for your reply again....is there a SAFE instruction of how I can flash GB ROM by using Odin?
You meant a STOCK GB or CUSTOM one?
Does it matter if I flash the German one when I was on the UK one originally?
THANKS AGAIN

Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium

dr.ketan said:
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ok...downloading now....will let you know the result soon....THANKS

DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!

dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
THANKS Doc.....by flashing the GB STOCK has solved the problem
How can I avoid this from happening in the future? Because I want to upgrade to ICS again

Final5k said:
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
Click to expand...
Click to collapse
No I didn't....where can I get that Kernel? and do I just flash it in CWM?
cheers for the suggestion

Congrats
It was likely to revive as i said it was seems to be a bootloop rather true brick
Dont worry it was just incidence, n not likely to repeat.
You can flash ics now safely. But first wipe cache and data before flashing ics if you have not perform it still.
Sent from my GT-N7000 using xda premium

Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072

Final5k said:
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Click to expand...
Click to collapse
so....
1. this kernel works with any stock ICS ROM?
2. Does it affect any performances....for example making the phone laggy?
cheers

''firmware encountered an issue'' for galaxy note

Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE

orcunpakten said:
Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE
Click to expand...
Click to collapse
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium

happened to me too..
That "firmware encountered an issue" is an indication that the system is corrupted to the point that it cant manage to startup..
I got that problem because of my stupidity.. Plugged my phone to the defective USB port and when I started flashing, I accidentally moved the cable and BAM! Phone is disconnected, and flash failed bigtime..
Your only fix for that if you ask me is do another flash... Try pulling out the battery for 10mins and try to boot into download mode.. That's how i was able to recover my phone from that screen..
I remember that message offering to run emergency recovery using Kies but it is totally useless.. trust me..
Make sure you're plugging in your phone to the USB port DIRECTLY on the motherboard of the computer (the ports at the back) not the ports on the front panel of the case of your computer..
If you're still encountering problems, I believe youre looking at a bricked device and seek more advanced assitance from people here..

SpyderTracks said:
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
usually factory fail.
i did every time fullwipe

Sounds like superbrick, but try flashing stock gb with pc Odin.
Sent from my GT-N7000 using xda premium

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium

SpyderTracks said:
Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
But i can get download mode and if i install odin ''AbyssNotekernel42CWTouchOriginalLogo'' i get recovery mode...

just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..

nokiamodeln91 said:
just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..
Click to expand...
Click to collapse
i try another laptop now... Cuz i remember what i do.
My last rom is stock XXLRK rom. And i tired slowly
i try everything HARDRESET-UPDATA-ALLWIPE but always slowly. And i think maybe i need a GB rom.
and i download XXLA4 everything is good and when i try root XXLA4.
this file: 'CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5'' stock phone.
Every time i install this way.
Wipe Data/Factory Reset
Wipe Cache Partition
Format/cache
Format/system
Format/data
Wipe Dalvik Cache
Wipe Battery Stats
Fix Permissions
This way always be good for me cuz i try this way 100 times.
I use Odin 1.85 and i use everytime u1_02_20110310_emmc_EXT4.pit (NO-RE-PARTITION)
So i think my fault is mistakenly last time i select ''N7000_16GB_Q1_20110914-stock.pit'' instal a ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''

I'm tired for try.
I try another pc but result is the same. FAIL FAIL FAIL
N7000XXLA4_N7000OJVKL1_N7000XXLA4_HOME.tar
N7000XXLRL_N7000XXLRK_N7000VD2LR1_HOME.tar
N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar
N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar
N7000XXLRI_N7000OJVLR3_N7000XXLRB_HOME.tar
I'm like a sammy's storage... I try this roms but result is the same.
Where did i wrong? problem is kernel?rom?pit file? ((

where did it fail?

nokiamodeln91 said:
where did it fail?
Click to expand...
Click to collapse
Odin Fail. I think factoryfs.img fail...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why now is the wrong? Thing I did always right way

Done dude.. u r good to go now

Problem is solved
Thank you so much ''nokiamodeln91''

dont do any wipes as of now.. u on ICS and an unsafe kernel
dont forget the thanks button

How did you rectify this nokiamodeln91?
Sent from my GT-N7000 using xda premium

OP used an incorrect file with the PIT16GB file.. i just corrected the mistake

nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Nice man, well done.
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Where can I get a copy of this PIT file? My phone is bricked and am only able to get into download mode and not recovery mode.

[Q] Can only use 'Download Mode'

Hi guys and girls.
I've been frantically searching XDA for the last few hours for a definitive answer, but to no avail, so thought it's about time I just asked!
I have in my possession a Samsung Galaxy S19000, that will only go into download made.
Here's how it happened........
This morning, I was given the phone by my brother in law and asked to root it and upgrade it to a newer/better rom. When it was passed
to me, it was.....
Firmware: 2.2.1
Baseband: 19000XXJY
Kernel: 2.6.32.9
[email protected] #1
Build: FROYO.XXJPY
After a successful root and upgrade, the phone ended up like this...
Firmware: 2.3.7
Baseband: 19000XXJVK
Kernel: 2.6.35.14-g3088622
Build: CyanogenMod-7.2.0-galaxysmtd
The new Rom, as nice as it was, wasnt what he wanted, so he asked me to restore it back to it's stock state. I went into CMW and did a restore, but it failed, and now the phone will only go into download mode.
I've tried flashing a stock rom via Odin, but it got as far as the 'Nand write' stage, then hangs.
Kies doesn't show up the device in 'Emergency firmware recovery' either.
I no all is not lost, so I'm not giving up. Any help will be much appreciated.
:fingers-crossed:

Can you post the whole Odin Log?
Normally this happen when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
Maybe it helps to flash the pit file to repartition.

To add.....
When the phone is off, it displays the 'phone and computer with an explanation mark triangle inbetween symbol', and Kies doesnt recognise it. When I enter download mode, Kies hangs at 'Connecting' for.....well..ever! So atleast I know it's recognised by my PC (ish) and it isn't completely dead :silly:

I had the same thing with the triangle a few months ago.
I just flashed a Stock Firmware with Repartition. Just be sure with Odin that you have ticked the right things Afterwards it worked.

Thankyou for you reply, and sorry for the delay posting back. God damn new user restrictions!!!
KUN1 said:
Can you post the whole Odin Log?
Click to expand...
Click to collapse
Heres what Im getting...
Code:
<ID:0/009> Added!!
<ID:0/009> Removed!!
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.img
<ID:0/009> NAND Write Start!!

First try it with Repartition. If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12

KUN1 said:
First try it with Repartition.
Click to expand...
Click to collapse
You'll have to excuse me, I've never had problems problems before, so I've only had to use the PDA box till now.....
Is that the re-partition tick box, or the re-partition PIT file box??
KUN1 said:
If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
Christ that looks involved doesn't it! I think that be a last resort as it looks like I'll need to clear a day in my diary before I start!

For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.

KUN1 said:
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
Click to expand...
Click to collapse
SOLVED
I couldnt sleep, so decided to have another bash at getting this phone going again.
Many many thanks to KUN1 for hunting down and PM'ing me the necessary Odin MD5 and PIT files to use for the method he posted above.
:victory:Success:victory:
You've been a life saver sir :good:

haha no problem

[Q] questions about rooting, flashing, ...

I've been reading posts on this forum for about 2-3 hours now and I still have some questions.
I have a galaxy s advance with android version 2.3.6 and baseband version XXLK2
i48.tinypic.com/2rz78sm.png
I was planning on rooting my phone and then maybe installing a custom ROM on it.
But I couldn't find a rooted firmware for my region (BELGIUM). And I also couldn't find the stock firmware for my region.
Neither on sammobile.com and neither on samsung-updates.com
My first question is: can I use rooted firmware that's for another region or will this cause problems for me?
My second question is: can I use rooted firmware with another baseband version than XXLK2?
Third question: if the answer on the first two questions is no, how am i supposed to root my phone then?
fourth and for now the last question: what is twrp recovery, and what is it used for, do I need it to root my phone or flash roms?
Thanks in advance!

ahmett75 said:
I've been reading posts on this forum for about 2-3 hours now and I still have some questions.
I have a galaxy s advance with android version 2.3.6 and baseband version XXLK2
i48.tinypic.com/2rz78sm.png
I was planning on rooting my phone and then maybe installing a custom ROM on it.
But I couldn't find a rooted firmware for my region (BELGIUM). And I also couldn't find the stock firmware for my region.
Neither on sammobile.com and neither on samsung-updates.com
My first question is: can I use rooted firmware that's for another region or will this cause problems for me?
My second question is: can I use rooted firmware with another baseband version than XXLK2?
Third question: if the answer on the first two questions is no, how am i supposed to root my phone then?
fourth and for now the last question: what is twrp recovery, and what is it used for, do I need it to root my phone or flash roms?
Thanks in advance!
Click to expand...
Click to collapse
do you want to stay with gingerbread, or upgrade to jellybean?
because rooting and flashing is much tougher in gb than in JB! tell me that i can help you.

Hi,
I got the same phone / baseband version in Austria. Downloaded XXLK2 firmware from sammobile.com, used simg2img to extract system.img, add su binary (=rooted), made a new system.img with make_ext4fs and flashed with heimdall. Meanwhile I used the same procedure to root and flash the jelly bean firmware XXLPY released for the russian market. Therefore I guess you can also flash a different version of gingerbread.
tom

Brainiac.shri said:
do you want to stay with gingerbread, or upgrade to jellybean?
because rooting and flashing is much tougher in gb than in JB! tell me that i can help you.
Click to expand...
Click to collapse
First i want to root my phone and then i want to install custom roms.
Sent from my GT-I9070 using xda app-developers app

RealBorg said:
Hi,
I got the same phone / baseband version in Austria. Downloaded XXLK2 firmware from sammobile.com, used simg2img to extract system.img, add su binary (=rooted), made a new system.img with make_ext4fs and flashed with heimdall. Meanwhile I used the same procedure to root and flash the jelly bean firmware XXLPY released for the russian market. Therefore I guess you can also flash a different version of gingerbread.
tom
Click to expand...
Click to collapse
But i'm from belgium and i couldnt find one for belgium. So you live in austria and downloaded the firmware for austria?
Sent from my GT-I9070 using xda app-developers app

ahmett75 said:
First i want to root my phone and then i want to install custom roms.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
if u upgrade to JB, root is a one step, 5 min process after which it takes a few more minutes to start flashing roms after flashing a new kernel with Clockworkmod. if u wanna start with jellybean, go here.http://forum.xda-developers.com/showthread.php?t=2094318(make sure u install the stock samsung rom first , then root then install recovery, then flash a custom rom) this WILL NOT void ur warranty
on the other hand rooting gingerbread is incredibly complex. if u wanna do that go to this thread http://forum.xda-developers.com/showthread.php?t=1985199
its totally safe to flash anither country firmware using odin.then root the supported firmware. also this will void your warranty,
then to install a new kernel with TWRP recovery , go here : http://forum.xda-developers.com/showthread.php?t=1873119
then finally choose the custom rom u want Jetmod or supressed and flash using TWRP(assuming you know how to atleast nter download and recovery mode!)
do all this in the same order.

Brainiac.shri said:
if u upgrade to JB, root is a one step, 5 min process after which it takes a few more minutes to start flashing roms after flashing a new kernel with Clockworkmod. if u wanna start with jellybean, go here.http://forum.xda-developers.com/showthread.php?t=2094318(make sure u install the stock samsung rom first , then root then install recovery, then flash a custom rom) this WILL NOT void ur warranty
on the other hand rooting gingerbread is incredibly complex. if u wanna do that go to this thread http://forum.xda-developers.com/showthread.php?t=1985199
its totally safe to flash anither country firmware using odin.then root the supported firmware. also this will void your warranty,
then to install a new kernel with TWRP recovery , go here : http://forum.xda-developers.com/showthread.php?t=1873119
then finally choose the custom rom u want Jetmod or supressed and flash using TWRP(assuming you know how to atleast nter download and recovery mode!)
do all this in the same order.
Click to expand...
Click to collapse
So what i'm going to do is:
1. download JB and install it
2. Root
3. then install twrp recovery
4. Flash a kernel with clockworkmod (which kernel do you suggest?)
5. Flash custom roms
Is this the correct order or am i wrong?

ahmett75 said:
So what i'm going to do is:
1. download JB and install it
2. Root
3. then install twrp recovery
4. Flash a kernel with clockworkmod (which kernel do you suggest?)
5. Flash custom roms
Is this the correct order or am i wrong?
Click to expand...
Click to collapse
You can't install any recovery by itself. It comes with kernel. Only kernel with permanent recovery - CWM is ThunderZap now.
1. Download JB, flash it with Odin. - go again to recovery - do factory reset.
2. Root with root.zip from stock recovery
3. Install kernel with CWM (ThunderZap) with dd command in terminal editor
4. Flash custom ROM from CWM recovery.

shut_down said:
You can't install any recovery by itself. It comes with kernel. Only kernel with permanent recovery - CWM is ThunderZap now.
1. Download JB, flash it with Odin. - go again to recovery - do factory reset.
2. Root with root.zip from stock recovery
3. Install kernel with CWM (ThunderZap) with dd command in terminal editor
4. Flash custom ROM from CWM recovery.
Click to expand...
Click to collapse
i'm going to give it a try, waiting for the download to finish

UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Одг: [Q] questions about rooting, flashing, ...
ahmett75 said:
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
Added!!
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Not recovry, in download mode. Did you unpack file. It should be around 700MB, not 400.
In recovery after flsshing, to do factory reset.
Sent from Galaxy S Advance

exchange exprsee
shut_down said:
Not recovry, in download mode. Did you unpack file. It should be around 700MB, not 400.
In recovery after flsshing, to do factory reset.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
ok, so now i've runned odin as admin, loaded the firmware and i get this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
then i go into download mode and connect my phone and i get this.
<ID:0/003> Added!!
i've read that something has to turn yellow, or isn't that necessary?
EDIT: i just pressed start and it is installing i think

Одг: [Q] questions about rooting, flashing, ...
ahmett75 said:
ok, so now i've runned odin as admin, loaded the firmware and i get this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
then i go into download mode and connect my phone and i get this.
<ID:0/003> Added!!
i've read that something has to turn yellow, or isn't that necessary?
EDIT: i just pressed start and it is installing i think
Click to expand...
Click to collapse
Search google "samsung download mode" and you should see image of it. When you power your phone with vol.down+home+power you get question do you want to continue. You press volume up to confirm. And after that with your phone connected and file in PDA hit start.
Sent from Galaxy S Advance

ahmett75 said:
UPDATE: went in to recovery mode, plugged the usb and started the flash got this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I have a similar issue. In Odin/Download mode I tried flashing Jelly Bean. Here is what I get from Odin:
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> power_management.bin.md5
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In red on the screen is "CUSTOM PWR MGT BINARY !!"
Did a factory reset. Same issue. Turned on Settings -> Applications -> Development -> USB Debugging + Allow mock locations. Same issue.
Any ideas?

JBAdvXDA said:
I have a similar issue. In Odin/Download mode I tried flashing Jelly Bean. Here is what I get from Odin:
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPY_I9070SERLPY_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> power_management.bin.md5
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In red on the screen is "CUSTOM PWR MGT BINARY !!"
Did a factory reset. Same issue. Turned on Settings -> Applications -> Development -> USB Debugging + Allow mock locations. Same issue.
Any ideas?
Click to expand...
Click to collapse
How much time does this take? Maybe try to redownload firmware file.

shut_down said:
How much time does this take? Maybe try to redownload firmware file.
Click to expand...
Click to collapse
Maybe 10seconds.
I downloaded Odin3.07 (Was using Odin3v1.7). From: http://forum.xda-developers.com/showthread.php?t=2086965
It is still showing in red "CUSTOM *** BINARY !!!!" but is now progressing to other components.
Will report back.

JBAdvXDA said:
Maybe 10seconds.
I downloaded Odin3.07 (Was using Odin3v1.7). From: http://forum.xda-developers.com/showthread.php?t=2086965
It is still showing in red "CUSTOM *** BINARY !!!!" but is now progressing to other components.
Will report back.
Click to expand...
Click to collapse
It should last couple minutes. Something is wrong at start. I am not saying redownload Odin, whole firmware file. But you did unpack it from zip, it should be noticable that it is corrupted when you did that on pc.

shut_down said:
It should last couple minutes. Something is wrong at start. I am not saying redownload Odin, whole firmware file. But you did unpack it from zip, it should be noticable that it is corrupted when you did that on pc.
Click to expand...
Click to collapse
Thanks.
Used Odin3v3.07 to install JB and it boots! Now the baseband version is "Unknown" and I have no service.

JBAdvXDA said:
Thanks.
Used Odin3v3.07 to install JB and it boots! Now the baseband version is "Unknown" and I have no service.
Click to expand...
Click to collapse
Try wiping cache reset in stock recovery and problem solve

I've succesfully upgraded to JB, rooted and flashed kernel.
Any suggestions about ROMS for i9070 ?