Database Develop

HTC Kaiser screen cracked

Hello,
I think HTC Kaiser's screen is too delicate. Mine got cracked yesterday very easily. I've had many PDA phones and it never happened to me.
Does anyone know where can I get a replacement screen?
Thanks,
Mario.

How did it crack, you pushed too hard when trying to use TouchFlo? it fell. Cause there has to be a reason that gives you the impression the screen is too delicate

ha ha, that sucks

Well, depending on how long you've had it, maybe it's covered under the 30 day warranty for return? I can't imagine how someone could break it, so it sounds like manufacturing defect to me??
Sound good to you??
Give it a try....
Let us know how it happened and if you get it fixed!
Good luck!
And to Doug2873... Don't make the guy feel worse than I'm sure he already does!!

Doug2873 said:
ha ha, you suck and just lost at least $750
Click to expand...
Click to collapse
What are you 12 years old?
d

I have replacement LCD screens for the Kaiser / TYTN II.
PM me with your email address and country. I will send you a photo of the replacement screen, and a estimate for shipping.

dwella said:
What are you 12 years old?
d
Click to expand...
Click to collapse
ya sorry. i only paid 299 for my tilt without needing to reup for 2 years (thank you corporate america and your service deals) so i guess i cant really feel that pain of the tytn ii retail owner

njbridges said:
I have replacement LCD screens for the Kaiser / TYTN II.
PM me with your email address and country. I will send you a photo of the replacement screen, and a estimate for shipping.
Click to expand...
Click to collapse
do you have any other parts?

When I read certain posts in these forums, I wonder: So annoying online.... what it would be like to meet these people in real life? Although I guess everybody has one of these in their office...

joeonsunset said:
When I read certain posts in these forums, I wonder: So annoying online.... what it would be like to meet these people in real life? Although I guess everybody has one of these in their office...
Click to expand...
Click to collapse
Amen I agree
d

Thank you all for your replies...I live in Mexico City and currently I'm in the US and there's no way of getting a replacement screen. HTC asked me to ship them the unit and they would charge between $170 and $350 USD for fixing it.
njbridges: I sent you a PM with my contact info.
I think we need a hard case for this device. Has anyone seen one?
Mine cracked because someone pushed me and I fell on it.
Thanks!
Regards,
MN

I think if SOMEONE fell on any PDA out there, the screen cracks is no wonmder. i think...
I read a Post where someone have cracked his PDA (i think mda3) because it feld off off the front window on his car and down to the gearbrick(?).. and it cracks the screen 2times.
I don´t have the feeling that the screen is more sensible as other screens...
Sorry for the engl. i´m from germany.
cu
sksaustin

I too cracked my screen pretty traumatized about it, superiorgadgets is looking into it, but I will pm njbridges as well as a backup.

I'm unable to get the cracked screen out of the device, I have all the screwdrivers but I can't find a way of opening the Kaiser.
Any ideas?

Hope this helps: http://forum.xda-developers.com/showthread.php?t=337102

Mine just cracked today, for no reason. It has never been dropped or abused, it's in new condition, not a nick or scratch on it, I'm extremely careful. It was on the counter charging and I went to take it off the charger and saw the screen was cracked. I called ATT and they told me I'm SOL, it would be $498 to repair.

yeah if u are comfortable best bet do it yourself and save $300-$400

I found the part for about $100 from another member here. I'm tempted to just replace it and sell this phone. While I loved the 8525, I haven't been particularly happy with the 8925. Maybe it would be better with newer firmware, but I won't know now unless I replace the screen. I wonder what it's worth for parts......

Mine has never been dropped, but after reading how easy is to break it I'm really concerned...
I have dropped my old 8125 like 10 times and it's still working like the first day...

I just ordered the replacement screen from njbridges today. I'll post after I've received the parts and add my 2 cents. If anybody is going to break something in this replacement process, it will be me. I'm completely inept at using tools. I can barely even change the batteries in my kids' toys.

Got a spare Tilt/Kaiser screen? SELL IT TO ME!!!

well i bought a screen for my Kaiser off eBay, but it wont get here for another 2 weeks; great, it was supposed to be here today. if anyone has a new Tilt/8925/Kaiser screen they'd be willing to sell (pref in USA for shipping reasons) let me know; i need one in less than a week as im going overseas; the data on my phone and having my phone there is CRITICAL, my only backup phone is not compatible with european networks.
im willing to pay for overnight shipping and send payment overnight as well. please email me at [email protected] ASAP!
thanks,
Slade

hey, take a look at this, it seems like this tilt had the infamous red light of death happen to it, so he's selling it cheap,
http://www.howardforums.com/showthread.php?p=11161500#post11161500
good luck
omar

omaralt said:
hey, take a look at this, it seems like this tilt had the infamous red light of death happen to it, so he's selling it cheap,
http://www.howardforums.com/showthread.php?p=11161500#post11161500
good luck
omar
Click to expand...
Click to collapse
screen looks like its busted too; mine looks close to that one
is the 8525 screen compatible with the 8925? i have one sitting next to me that is bricked; can i salvage its touchscreen?

http://forum.xda-developers.com/showthread.php?t=398128

Broke Tilt in half

So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?

wshader said:
So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?
Click to expand...
Click to collapse
Check thi site, there is a manual how to dismantle kaiser. Could be helpful:
http://michael-channon.spaces.live....smantling+%2f+Disassembling+Guides+HTC%2fETEN

Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing. And alot of steps missing to get it this way.

wshader said:
Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing.
Click to expand...
Click to collapse
OMG, that had to hurt.

Yeah, kid was playing basketball and fell out of his pocket. I guess the kid has broke 4 phones this month... curve, tilt, 2 pantec duos. Told my friend to get him a $20 go-phone now lol. And use the savings to get me a tilt
I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)

wshader said:
Yeah, and I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)
Click to expand...
Click to collapse
I hope u repair it. Wish u luck.

Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
I suggest trying to find one broken on ebay and using the 2 you have to make one working phone. Even a broken Tilt can run for $200 on ebay though.

Anyone notice that case has already been replaced at some stage as it has a camera hole (not standard for Tilts) a keyboard without the white part and no logo. Perhaps the replacement was weaker than the original one. If the O/P searches the forum here for LCD Screen replacements there's loads of links to different companies supplying parts for Kaiser variants. I have no experience using any of them though so cant suggest which ones are best.

@Planet Neo
Yeah I was thinking that but was hoping it wouldn't come to that. Would suck to spend $200 for parts just to find the motherboard is broke or something to that effect. Was hoping someone knew of a place to buy a new cable or had one to sell. Also was hoping someone with some experience could let me know if they think I'd need a new tilt assembly.
@Flying Kiwi
Lol, I used a picture from kaiser disassembly guide to show what i was referring to. It has the standard tilt case. I'll be taking pictures of what I have as soon as I have the phone in my possession.

Okay I assume that its going to be very hard to get the ribbon and you're going to need housing. I believe that it will be the same as making a new tilt, because the screen is as good as dead without the ribbon so all you could do is get new housing and a new screen and it should rack up about $150-200. Which in my opinion is much easier and faster and better than frustrating on getting a ribbon.
Just my 2 cents.
Kraize

Planetneo said:
Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
Click to expand...
Click to collapse
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S

Mysterious Stranger said:
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S
Click to expand...
Click to collapse
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.

Planetneo said:
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.
Click to expand...
Click to collapse
These things are made in Shenzhen so where you think the parts come from?
Stop talking &*%(* and I'll stop correcting your posts Instead of saying something is a fact say it's your opinion. It's not a 'rare' part - and they ship WORLDWIDE. It's not as if he'll get one from a local mom and pop store - it's gonna be mail order wherever you get it from and looking at the seller's feedback is a good judge - all my parts come from China - so why pay a middleman such as yourself extra $ just so it has a US stamp on the package?
Someone needs to act as quality control on your posts and it looks like it's gonna have to be me if you keep posting [email protected]
M.S

replacement screen and case?

Hey, I'm curious to know if anyone knows where to get replacement parts for the leo. I recently fell down a flight of stair and destroyed everything to do with my leo's outsides. The screen is trashed, and the case it bent. So, I need to replace it all. Any information would be greatly appreciate.
Thanks in advance.
-Caid.

When in doubt, contact HTC (And doubt some more)
It's been a few days since I first started this thread. Lots of views but no replies. So... I wrote HTC about it (on their website) and their response was quite unbelievably stupid.
I mentioned that I live in China, and that I'd like to know how I could have it repaired. I put in the serial number as well. They replied by telling me that my phone was sold in France and that I should go back to France to get it repaired, otherwise I can go to Hong Kong or Taiwan to get it repaired.
I am really curious what kind of person would write such a silly reply. As though plane tickets cost the same as cab rides, and the flight is only a hop and a skip away.
I've written them back and clarified the kind of help I am looking for (An address to send my phone to, and a quote for parts and labour) here's hoping they don't misinterpret it again and send me more bs.
Not much point to my writing this other than to say, if you need to contact HTC with a similar query, assume you're writing to an idiot and be as absolutely clear as you can. You may even want to suggest to them what is common sense, and not assume that they're going to think of the most reasonable method themselves.
-Caid.
444

Hi,
Sorry to hear of your accident.
If your phone is that badly damaged why don't you just claim off your phone or house insurance and get a new one? Sounds like this is much less hassle than trying to get it repaired.
I am assuming you have some form of insurance for the phone?
WB

wacky.banana said:
Hi,
Sorry to hear of your accident.
If your phone is that badly damaged why don't you just claim off your phone or house insurance and get a new one? Sounds like this is much less hassle than trying to get it repaired.
I am assuming you have some form of insurance for the phone?
WB
Click to expand...
Click to collapse
Or send it to HTC repair. I heard it will cost like €150 to repair.

Have a nearly same question.
My HD2 screen one day have a big black dot at the center. I give my HD2 to the local HTC service, they answer me that, they cannot give me a warranty because it's broken by pressing from outside into a screen.
So, if replace a screen will cost about 230USD.
I take my HD2, come home, search on eBay for the screen replacement. It cost only 80USD. Maybe it's a solution for you too.

Hi,
where did you get the replacement screen for $80?
Thanks.

knightpants said:
Hi,
where did you get the replacement screen for $80?
Thanks.
Click to expand...
Click to collapse
See here http://cgi.ebay.com/ORIGINAL-HTC-HD...AU_MobilePhoneAccessories?hash=item4cecb605ee

vuvan said:
See here http://cgi.ebay.com/ORIGINAL-HTC-HD...AU_MobilePhoneAccessories?hash=item4cecb605ee
Click to expand...
Click to collapse
that is just touchscreen+bracket, not entire LCD. Though you get a free screwdriver with it

vuvan said:
Have a nearly same question.
My HD2 screen one day have a big black dot at the center. I give my HD2 to the local HTC service, they answer me that, they cannot give me a warranty because it's broken by pressing from outside into a screen.
So, if replace a screen will cost about 230USD.
I take my HD2, come home, search on eBay for the screen replacement. It cost only 80USD. Maybe it's a solution for you too.
Click to expand...
Click to collapse
I've had the same problem too a couple of times. Fortunately both times the dot disappeared after pressing the screen gently in various places. What's disturbing, though, is that I've had the phone for a week only and gone to great lengths to ensure it has not been under any physical pressure (or psychological, for that matter ). Have anyone else noticed this; is this a weakness with the phone or have I just been unlucky?

u should take it to htc service !

I've just dropped mine and accidentally closed a door on it, so now mine is full of scratches too.
I'll take it back to the service center in Taiwan when I get back there, though rather annoyingly that won't be until March at the earliest If the HK service center can do it though, I can drop it in there in Feb ... I wonder if their pricing will be the same ...

Hey guys I dropped my HD2 too and the screen cracked. I noticed that there are repair kits at around 80 USD. Anyone has any video or tutorial on how to replace the screen with the repair kit? Or has anyone self-repaired the screen successfully?
I'll have the chance to either get a new HD2 (and sell the broken one), the Hero or perhaps the Nexus One so I want to see if it is possible to do a cheap fix and get a new toy.

I've ruined my device....is there anything that can be done?

Even worse, its a MDA Compact V.
Basically, I got the newton rings issue a few months ago and after reading threads on here, tried the duct tape trick which worked a treat....for about a month.
Then the issue came back of the screen not responding, so I continually used the tape to fix the screen. It got to the point where I had done it that many times, I was having to carry a roll of tape around with me, and the front of the front facia began to lift on the left hand side of the phone each time I did it.
It got to the point where I didnt need the tape anymore, I could just use my fingernail to pull the layers apart which would make the screen respond again.
However, recently I noticed a spec of dust under the screen. I put up with it for a while but last week I decided to try and get it out.
I stupidly lifted the layers apart and blew into the phone. This caused the touchscreen to behave very erratically and did not move the dust.
I was a bit tipsy at the time and actually lifted the whole of the front off the phone (thinking I could clean the screen and stick the front back down) but now the phone will not respond to touch no matter what I do.
I was thinking of trying to replace the front parts myself, but as mentioned its a Compact V not a D2, so the shape of the front of the handset is slightly different and I cannot seem to find anywhere that I can order the front facia.
I've got a lock on the phone, so I cant even flash it if I wanted to sell it as 'broken'
Can anyone think of ANYTHING that could help?
Any advice would be GREATLY appreciated!

You can flash your phone if you just put the Rom on a storage card and update it from there, and new digitizers are just 4 dollars, so just put a new one in ( or I can do it for you if you pay for the costs) I've replaced my digitizer about 3 times now... and im pretty good at it XD

i really hate to say it. but i think its just time to buy a new phone. I know money may be an issue. i dont have the cash to fork out for new phones either. but if this happened to me. i would do my best to back everything up. then just buy a cheap phone untill i saved up . i have an htc pure right now saving up for an evo 4g. I just upgraded my contract so i will have to pay full price for the evo 4g around $500.00 . unless ya can limp this one along . but from what it sounds like is its about time to bury that one ...
devices messing up does suck, im sorry..
Good Luck

Thanks guys.
Is it possible to flash from the SD card when the device is locked?

maxcherry said:
Thanks guys.
Is it possible to flash from the SD card when the device is locked?
Click to expand...
Click to collapse
Yes it is possible. When flashing from SD you don't have to use your screen in any way. Have a look in the ROM-Threads, u will find the way to flash and some great "how-to"s.

Mar'Cel said:
Yes it is possible. When flashing from SD you don't have to use your screen in any way. Have a look in the ROM-Threads, u will find the way to flash and some great "how-to"s.
Click to expand...
Click to collapse
Thanks Mar'Cel. I notice we both have the same device. Do you know anywhere online where I would be able to order replacement parts?
Thanks again, Max.

maxcherry said:
Thanks Mar'Cel. I notice we both have the same device. Do you know anywhere online where I would be able to order replacement parts?
Thanks again, Max.
Click to expand...
Click to collapse
I believe if you search on screen replacement threads they have stated where they were purchsed.
Also, you can use Pocket Controller Pro or My Mobiler to access your screen from your PC.