Related
Since we have rooted it now SPL seems to be useless.
----
Well, this is the original SPL image on Tattoo, nothing related to update.zip.
----
I was trying to reverse it, and just found why it refuses to erase, but I could not find why it refuses to download data from the host.
----
By now, to flash SPL or the first splash, you need a custom kernel with additional partition information and then use flash_image is OK.
tewilove said:
Since we have rooted it now SPL seems to be useless.
Click to expand...
Click to collapse
useless !! nope defo not, thanks for the input..
are you new here or regular user with new I.D. ??
..
definitely tewilove ; i loved this since long time.... is it correct that i rename it as update.zip & boot into recovery, then apply update.zip ???
one more question : will it change my baseband version from G to H ?, which is non 3G to 3G firmware...
i am dying here someone would come up with this innovative upload. thanks tewilove for this wonderful upload....
@tewilove, ur zip file is not signed.... when i tried updating it in recovery mode, it says verification failed, no signature....
what to do buddy ?
manuvaidya said:
@tewilove, ur zip file is not signed.... when i tried updating it in recovery mode, it says verification failed, no signature....
what to do buddy ?
Click to expand...
Click to collapse
sign it urself using testsign.jar
svprm said:
sign it urself using testsign.jar
Click to expand...
Click to collapse
how do i do it ??? little brief explanation would have been much better rather than telling me do it myself right ???
I have a dead Tattoo.. stucked in tattoo logo at the boot... it's possible to use this spl for heal?
Lox_Dev said:
Original post:
Now you are going to sign the zip file. Download attached testsign.zip and copy it in your <SDK>/tools folder. Extract it here. It should create a sign subfolder with a testsign.jar file in it.
Then, from <workdir> folder, do:
java -classpath <SDK>/tools/sign/testsign.jar" testsign file.zip file-signed.zip
Ok, now your zip file is ready to be deployed using cyanogen recovery image.
Click to expand...
Click to collapse
Test Jar:http://forum.xda-developers.com/attachment.php?attachmentid=220533&d=1251207154
after i signed the file and try to flash i get the following message:
E:Can't find update script
Any ideas?
svprm said:
Test Jar:http://forum.xda-developers.com/attachment.php?attachmentid=220533&d=1251207154
Click to expand...
Click to collapse
i am sorry. i couldnt succeed in signing it with testsign.jar file u uploaded....
could u please do it for me... just a favour. i think i am missing out some important step whicch i couldnt figure it out.... please test sign it & upload it here.....
moved to here
hi, please i need help about unpack and repack galaxy mini stock roms (.tar.md5) cause i wanna remove bootloader (arm11boot) to avoid physical domage to my mini;
i didn't find the rom what im searching for in this thread: http://forum.xda-developers.com/showthread.php?t=1551586
i need this middle east rom: http://www.hotfile.com/dl/155191960/b13d98c/S5570JPKT2_S5570OJPKT2_EGY.zip.html but without bootloader;
thankx
Send a pm to annson08.. Include the link and he may do it for you..
kitrax59 said:
Send a pm to annson08.. Include the link and he may do it for you..
Click to expand...
Click to collapse
Don’t give me a fish, teach me how to fish.
I would like to help you fishing but I'M NOT RESPOSIBLE IF YOU ENDED BY CACHING A SHARK
I had downloaded a rom with removed bootloader from annson08 thread, by opening the .tar archive i noticed that he did just removed the arm11boot file from the package nothing else.
so maybe removing this file from your ROM and flashing it like usual will do the trick
Do It At Your Own Risk
Unpack rom..search bootanimation.zip.....replace with any other of ur choice
....repack
Sent from my GT-S5570 using xda premium
bilel2301 said:
hi, please i need help about unpack and repack galaxy mini stock roms (.tar.md5) cause i wanna remove bootloader (arm11boot) to avoid physical domage to my mini;
i didn't find the rom what im searching for in this thread: http://forum.xda-developers.com/showthre...?t=1551586
i need this middle east rom: http://www.hotfile.com/dl/155191960/b13d...Y.zip.html but without bootloader;
thankx
Click to expand...
Click to collapse
unpack rom and its contents
open boot.image
in that remove arm11 boot
pack your rom !
flash it via odin
abdovar said:
I would like to help you fishing but I'M NOT RESPOSIBLE IF YOU ENDED BY CACHING A SHARK
I had downloaded a rom with removed bootloader from annson08 thread, by opening the .tar archive i noticed that he did just removed the arm11boot file from the package nothing else.
so maybe removing this file from your ROM and flashing it like usual will do the trick
Do It At Your Own Risk
Click to expand...
Click to collapse
i know that he just removed arm11boot but when i did that with many method i didn't succed to add it to "odin multi downloader" it crashs every time when i add the new file without bootloader i think that is not just unpack,remove and repack there is something special to make odin fish a fish not a shark
bilel2301 said:
i know that he just removed arm11boot but when i did that with many method i didn't succed to add it to "odin multi downloader" it crashs every time when i add the new file without bootloader i think that is not just unpack,remove and repack there is something special to make odin fish a fish not a shark
Click to expand...
Click to collapse
He wrote it in his thread...
I believe the method requires linux (/cygwin)...
Edit: no, I couldn't find it... :sad:
Typed on a small touchscreen
a.cid said:
He wrote it in his thread...
I believe the method requires linux (/cygwin)...
Edit: no, I couldn't find it... :sad:
Typed on a small touchscreen
Click to expand...
Click to collapse
yeah i used cygwin too but i failed to make the output file work on odin!!!
i used this method from yagya:
Code:
cd firmware_directory
// Goes inside firmware directory
tar -cf firmware_name.tar amss mibib oemsbl qcsbl boot.img recovery.img system.rfs csc.rfs
// This will create a tar_file named firmware_name.tar containing all the files mentioned afterwards. You'll need to check if all files except arm11boot are included or not and add (or remove) to or from above list.
md5sum firmware_name.tar >> firmware_name.tar
// Checks md5sum of the tar file.
mv firmware_name.tar >> firmware_name.tar.md5
// Renames the firmware file. The outcome of this is your flashable zip file.
[optional] gzip firmware_name.tar.md5
//zips the firmware_name.tar.md5 file as gz format. It is easier while sharing the file since it reduces the file size by almost 50 %.
you did everything correct but the problem of Odin crashing is its a md5 file then you remove the arm11boot md5 of file changes which makes the Odin crash
steps to correct it:-
1. extract everything from package
2. delete arm11boot
3. then download a software which can create a tar package
4. with that software create an empty tar package
5. put all the files in that tar package
then then you are ready to flash
dhlalit11 said:
you did everything correct but the problem of Odin crashing is its a md5 file then you remove the arm11boot md5 of file changes which makes the Odin crash
steps to correct it:-
1. extract everything from package
2. delete arm11boot
3. then download a software which can create a tar package
4. with that software create an empty tar package
5. put all the files in that tar package
then then you are ready to flash
Click to expand...
Click to collapse
it doesn't work also!!!! i flash it with (.tar) odin freeze in "download amss" and with (.tar.md5) odin crash also like using cygwin!!! i think that i really need help from annson08, i pm him but he didn't answer :/ :/
bilel2301 said:
it doesn't work also!!!! i flash it with (.tar) odin freeze in "download amss" and with (.tar.md5) odin crash also like using cygwin!!! i think that i really need help from annson08, i pm him but he didn't answer :/ :/
Click to expand...
Click to collapse
hey sorry for the late reply, really busy at the moment. I believe yagya made a tutorial about this...wait....hmmmm....ahh here it is,
http://handyinformation.freevar.com/showthread.php?tid=8&pid=12#pid12
that's not how I do things but that link also works.
annson08 said:
hey sorry for the late reply, really busy at the moment. I believe yagya made a tutorial about this...wait....hmmmm....ahh here it is,
http://handyinformation.freevar.com/showthread.php?tid=8&pid=12#pid12
that's not how I do things but that link also works.
Click to expand...
Click to collapse
the link that you send to me is the link of my thread in yagya's forum
i try yagya's method but it doesn't work for me :/ :/
please when you have time pm how to do it thankx
My friends,
Some colleagues like to flash and restore roms too in developer devices (not for sale) like all did with KDZ updater everyday.
The question is: If KDZ isn't working with developer devices, then how we can flash it? How can we unlock it?
I discovered some things:
1 - KDZ is a encrypted file.
2 - Developers device has unlocked bootloader.
3 - I've tried many ways to flash kdz in this device, but it never concludes the process, never worked. It stops on "wparam=2010 iparam=18". There are diferents parameter varyating for each developer phone.
4 - We have to discover a new way to flash in this device, or we can decrypt the KDZ file.
*BINGO!* I DIT IT!
How to FLASH and Unbrick LG P880 Developer Edition
This procedure applies only for the initial LG P880 Developer Edition.
But how to know if your device is this version?
First, remove the back cover of your device and search for the words "not for sale". Then (if your phone still works), go to settings> about phone> Software Version. If the version of your device starts with the code V09a, V09b, V09c, etc. - This is a sign that your phone is the developer version!
This means you can not flashing KDZ files through the official LG updater. Even if you download the file separately, the only thing you will achieve is to brick your phone.
But our problems are over! I came to save you!:thumbup:
Procedure:
First, download the KDZ file of your choice here: http://lg-phone-firmware.com/index.php?id_mod=15
Second, download this firmware pack with DZ. File and proper .DLL File: http://bayfiles.com/file/bRZx/AZaxbu...GP880.v10A.rar
Third, download this drivers:
http://csmg.lgmobile.com:9002/swdata...er-4.10(2).zip
http://csmg.lgmobile.com:9002/data/L...in7_LGEAll.zip
Fourth, download LG Flash Tool:
http://www.mediafire.com/?pzqr0gsw8u9erxl
We will definitely erase any record of your device. Unlike the KDZ method, this one makes a "ULTRA HARD RESET". Our device is not registered as selling model, yet the hardware is identical to the model of the consumer. We'll do the flash rom, and also unlock the device so that it is compatible with the KDZ flasher once and for all!
Once you’ve downloaded all the archives, let’s begin. Go to victory.
1. Extract “LGFlashTool 1.2” and instal "Setup_LGFlashTool_1.2.45.921.exe"
2.Replace the file LGFlashTool.exe into C:\LG\LGFlashTool ( You will crack the software with this )
3. Extract and Install “OMAPFlashInstaller-4.10(2).zip”
4.Exract “LGUnitedModemDriver_WHQL_ML_Ver_4.9.7_All_Wi n7_LG EAll.zip” and Install“LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_ 1. 0 .exe ” and“LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1. 0 .exe ”
5. Turn Off phone, Remove your phone’s SIM and SD cards.
6.Press and hold voll up button in LG P880.
7. When you holding “voll up button” connect the USB cable.
8.When computer detects the new hardware (Omap4430) release “voll up button”.
9. Install the Driver.
10.After Driver installation, go to device manager and change the port “LGE CDMA USB SERIAL PORT” to “com41″.
11. Run LGFlashTool.
12.In DLL select the proper DLL file you’ve downloaded.
13. In S/W select only the proper DZ. File you’ve downloaded.
14.Choice (Check) “USB” and click OK.
15. Click on Port COM settings(COM plug icon) and select "1" ( Unmark the numbers above )
16. Click start(The Port 1 window should appear READY).
17.Disconnects USB cable and wait 5 seconds.
18. Press and hold voll up button in Lg P880 and connect USB cable.
19.The update process will begin automatically after that release the “vol up”.
20. When the progress bar reaches 100%, the phone will power on and boots automatically!
21. Done! You did it!
22. Now go and flash a KDZ file as your choice using KDZ updater! Your phone was’nt more a developer phone! We transformed it on a consumer phone edition! Wow!
Id like to thanks all if you!
And dont forget to thanks hitting the "thanks" button!
Maybe someone should upload a clean firmware backup to flash, hm?
reas0n said:
Maybe someone should upload a clean firmware backup to flash, hm?
Click to expand...
Click to collapse
Hehe, thanks, but I've made it already!
Looks like 2 flashes...
Great Xavier, even if I don't need thanks.
Maybe I can use that for some other things
Have a nice weekend :good:
Think you made a lot of happy campers out there - impressive!
I think this tutorial should be "fixed" on the top of the " Optimus 4X HD Q&A ".
Someone should pay a beer to Xavier, he maid a great job !
Just one thing Xavier, the " firmware pack with DZ. File and proper .DLL File: http://bayfiles.com/file/bRZx/AZaxbu...GP880.v10A.rar" takes me to a dead end (need to register...), the drivers links are dead
Can you fix that ?
Tnx
Hey guys i discovered some things.
We can create a new DZ. file. And a dll can be extracted. Soon I will share how to create a new way using a kdz. file!
Sent from my LG-P880 using xda premium
xavierleonelbr said:
Hey guys i discovered some things.
We can create a new DZ. file. And a dll can be extracted. Soon I will share how to create a new way using a kdz. file!
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
But Xavier, thats easy... every time you select "start upgrade" in R&D Test Tool (after you choose a .kdz file) it generates a .cab file.
You just need to extract what's inside of the V10x.cab ... it will be a .dz file and the .dll, in this case "X3_2008_v0.0.6.9"
I didn't explore a lot that "OMAPFlashInstaller" yet, not a lot of time for that now
Just a curiosity, the .dz file extracted from a V10f_00.kdz is good as well, or needs to be exactly the V10a_00.kdz?
Thanks
RuedasLocas said:
But Xavier, thats easy... every time you select "start upgrade" in R&D Test Tool (after you choose a .kdz file) it generates a .cab file.
You just need to extract what's inside of the V10x.cab ... it will be a .dz file and the .dll, in this case "X3_2008_v0.0.6.9"
I didn't explore a lot that "OMAPFlashInstaller" yet, not a lot of time for that now
Just a curiosity, the .dz file extracted from a V10f_00.kdz is good as well, or needs to be exactly the V10a_00.kdz?
Thanks
Click to expand...
Click to collapse
Yes, is good as well. Running V10F here smoothly.
Sent from my LG-P880 using xda premium
xavierleonelbr said:
File and proper .DLL File: http://bayfiles.com/file/bRZx/AZaxbu...GP880.v10A.rar
Third, download this drivers:
http://csmg.lgmobile.com:9002/swdata...er-4.10(2).zip
http://csmg.lgmobile.com:9002/data/L...in7_LGEAll.zip
Click to expand...
Click to collapse
This is etraordinary news my friend!!! But could you please put the 3 links I quoted again. Right now they do not work, and I am dying to flash V10F on my developer LG
TechGR said:
This is etraordinary news my friend!!! But could you please put the 3 links I quoted again. Right now they do not work, and I am dying to flash V10F on my developer LG
Click to expand...
Click to collapse
Ok, Xavier, where are you my friend?
I generate a "http link" for the firmware pack with DZ. File and proper .DLL:
http://s22.real-debrid.com/dl/74d4u284x2y26313b43380/.kdz_et_.dz_.dll_LGP880.v10A.rar
For premium:
http://bayfiles.com/file/bRZx/AZaxbu/.kdz_et_.dz_.dll_LGP880.v10A.rar
LGUnitedModemDriver:
http://csmg.lgmobile.com:9002/data/LGUnitedModemDriver_WHQL_ML_Ver_4.9.7_All_Win7_LGEAll.zip
LG_Flash_Tool_1.2:
http://www.mediafire.com/?pzqr0gsw8u9erxl
https://rapidshare.com/files/1473798152/FLASH_1.2.45.921.zip
OMAPFlashInstaller-4.10(2):
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AVIVML/20110623_05/OMAPFlashInstaller-4.10(2).zip
I think it's all
Thank you, downloading now.
Downloaded everything except for these, the first one works very very bad, the second stops after 50-90MB (i Know, they are the same file).
TechGR said:
Thank you, downloading now.
Downloaded everything except for these, the first one works very very bad, the second stops after 50-90MB (i Know, they are the same file).
Click to expand...
Click to collapse
I presume you're talking about this link: http://bayfiles.com/file/bRZx/AZaxbu/.kdz_et_.dz_.dll_LGP880.v10A.rar
If you use JDownloader you can do it in 5-10 minutes (depending on your Internet speed...)
I start to download it 2 minutes ago, 3MB/s in 3 minutes it will be finished.
I'll try to upload to 4shared
This file contains:
- LGP880AT-00-V10a-EUR-XXX-MAY-23-2012+0.dz
- V10A_00.kdz
- X3_2008_v0.0.6.9.dll
Like I mentioned before, to have a .dz file it's just needed the .kdz file.
Once that you'll need it to flash, it's enough when you download the .kdz that you want.
RuedasLocas said:
.... every time you select "start upgrade" in R&D Test Tool (after you choose a .kdz file) it generates a .cab file.
You just need to extract what's inside of the V10x.cab ... it will be a .dz file and the .dll, in this case "X3_2008_v0.0.6.9"
Click to expand...
Click to collapse
TechGR said:
This is etraordinary news my friend!!! But could you please put the 3 links I quoted again. Right now they do not work, and I am dying to flash V10F on my developer LG
Click to expand...
Click to collapse
Yes my friends, i will fix it very soon! Its 13:40 here in Brazil, I'm working now. When I go home I will do that!
@RuedasLocas-the problem is not the speed, I download it with ~1MB/s. The problem is that I tried downloading ~10 times, and it stops after 50, 90, 27, etc (up to 500) MB. It stops like it finished downloading and then the archive is corrupt. Maybe a different hosting service would be better.
Anyway, thank you guys for your help!
TechGR said:
@RuedasLocas-the problem is not the speed, I download it with ~1MB/s. The problem is that I tried downloading ~10 times, and it stops after 50, 90, 27, etc (up to 500) MB. It stops like it finished downloading and then the archive is corrupt. Maybe a different hosting service would be better.
Anyway, thank you guys for your help!
Click to expand...
Click to collapse
Arghhhhhhhhhhhhhh!!!
TechGR, you don't need that!
Grab the UpTestEX_mod2_marwin.exe (R&D Test tool) select the KDZ file that you want to install in your phone, hit the "Start Upgrade" and the programe will creat in the same folder where you have the "UpTestEX_mod2_marwin.exe" a .cab file. Even if you don't connect the phone, nothing...
As soon as you see that cab file in the folder, use winRAR to extract the DZ file and the DLL.
The "kdz-update" that I provide here:
http://www.4shared.com/rar/Re4VCOAS/kdz-udpate.html
Arghhhh again
Ok, I tried that, but it did not make any CAB file. However, I decrypted the KDZ using the same tool, and I ended up with a .dz file and a .dll file. I suppose these are the files I need
Well, I followed the tutorial from the first post exactly, except I used the two files I extracted. When I get to step 16 and I click Start, the port 1 does not appear ready (nothing happens).
I'm sure we're gonna sort it out soon, I gotta run now.
TechGR said:
Ok, I tried that, but it did not make any CAB file. However, I decrypted the KDZ using the same tool, and I ended up with a .dz file and a .dll file. I suppose these are the files I need
Well, I followed the tutorial from the first post exactly, except I used the two files I extracted. When I get to step 16 and I click Start, the port 1 does not appear ready (nothing happens).
I'm sure we're gonna sort it out soon, I gotta run now.
Click to expand...
Click to collapse
The best person to help you it's xavierleonelbr, the one who discovered this method
I know, xavier has done a great job with this tutorial and I am sure I can work this out with his help!
and waste a unlocked dev edition phone?
i mean think about it..
this is a rare device..
Hello ladies and gents. As you may have been able to tell from the title, I made a huge mistake when playing around with my phone's build.prop file. I had tapped on the ro.build.description file and it pulled up the keyboard. I accidentally input an "r", so I deleted it, then saved and left the prop file, thinking everything was fine and proper. Unfortunately, that was not so. Upon my next reboot, I discovered several problems. The Playstore and gallery crash upon every open, and even worse, my internal memory isn't being recognized. I know the problems must be originating from the build description prop file, since that was the only prop file change that had happened since my last reboot. If anyone could give any tips on how to fix this or mount the external sd as internal, that would be wonderful. I need to be able to screnshot, install apps, and perform other functions that require internal storage. Please help me out ASAP.
Lincsbro said:
Hello ladies and gents. As you may have been able to tell from the title, I made a huge mistake when playing around with my phone's build.prop file. I had tapped on the ro.build.description file and it pulled up the keyboard. I accidentally input an "r", so I deleted it, then saved and left the prop file, thinking everything was fine and proper. Unfortunately, that was not so. Upon my next reboot, I discovered several problems. The Playstore and gallery crash upon every open, and even worse, my internal memory isn't being recognized. I know the problems must be originating from the build description prop file, since that was the only prop file change that had happened since my last reboot. If anyone could give any tips on how to fix this or mount the external sd as internal, that would be wonderful. I need to be able to screnshot, install apps, and perform other functions that require internal storage. Please help me out ASAP.
Click to expand...
Click to collapse
extract the build.prop file from your rom.zip
make a flashable zip & flash it. will work normal again
(ifm u dont know how to make flashable zip, just get any flashable mod,
extract all files, delete all files , only leave the meta-inf folder with its data inside untouched & a folder called "system",
put build.prop into system folder, now mark both folders --> right click --> send to zip, put on sd & flash)
good luck!
bejunk said:
extract the build.prop file from your rom.zip
make a flashable zip & flash it. will work normal again
(ifm u dont know how to make flashable zip, just get any flashable mod,
extract all files, delete all files , only leave the meta-inf folder with its data inside untouched & a folder called "system",
put build.prop into system folder, now mark both folders --> right click --> send to zip, put on sd & flash)
good luck!
Click to expand...
Click to collapse
Alright then. I have 2 questions though. Does the flash mod I use have to be specifically for my phone's model? And what do you mean by marking the folders?
Lincsbro said:
Alright then. I have 2 questions though. Does the flash mod I use have to be specifically for my phone's model? And what do you mean by marking the folders?
Click to expand...
Click to collapse
Hey bro, just tell me ur Rom & i will make a flashable zip for you )
bejunk said:
Hey bro, just tell me ur Rom & i will make a flashable zip for you )
Click to expand...
Click to collapse
I'm really sorry, but I don't know what you mean by my Rom. Generally, I'm pretty knowledgeable about my Android, but I've only been rooted for about a week. If by rom you mean like ClockworkMod or something, I'm just on my stock rom. If you mean something else, I don't know. And which slot in Odin would put this in? I only have experience with .tar and .md5.
Lincsbro said:
I'm really sorry, but I don't know what you mean by my Rom. Generally, I'm pretty knowledgeable about my Android, but I've only been rooted for about a week. If by rom you mean like ClockworkMod or something, I'm just on my stock rom. If you mean something else, I don't know. And which slot in Odin would put this in? I only have experience with .tar and .md5.
Click to expand...
Click to collapse
Check in 'Setting>About> copy everything in here and post it here, so people can help with your problem.
Naimlaaa said:
Check in 'Setting>About> copy everything in here and post it here, so people can help with your problem.
Click to expand...
Click to collapse
Thanks, I should have thought to do that sooner
bejunk said:
Hey bro, just tell me ur Rom & i will make a flashable zip for you )
Click to expand...
Click to collapse
Alright, here's my system info:
Model Number: SAMSUNG-SM-G730A
Android 4.4.2
Baseband: G730AUCUBNG3
Kernel Version: 3.4.0-1670137
[email protected] #1
Thu Jul 24 22:04:06 KST 2014
Build Number (My busybox installer said this was my rom, so it might be what you need): KOT49H.G730AUCUBNG3
Hope this helps you out
Lincsbro said:
I'm really sorry, but I don't know what you mean by my Rom. Generally, I'm pretty knowledgeable about my Android, but I've only been rooted for about a week. If by rom you mean like ClockworkMod or something, I'm just on my stock rom. If you mean something else, I don't know. And which slot in Odin would put this in? I only have experience with .tar and .md5.
Click to expand...
Click to collapse
sorry my llate reply, lets go
he bro u know whats the rom ) you say you are on stock rom, thats all i need.
clockwork mod is no rom, its a recovery.
sorry was a small hazzle for me as you use the AT&T version of the phone, now to the solution:
we need to just replace the damaged build prop with original one.
1. download the system image here: http://www.mrcrab.net/viewstockrom/19845-sm-g730a.html (or anywhere if u find, maybe at SAMMOBILE)
2. (try) to extract the parts of it, we need the system image. if u dont know how just google it, maybe some tools needed for diffrent kind of datas. once all extracted the build.prop is inside system (-folder). copy it to SD & replace via any ROOT explorer, set the right permissions, like in this pic LINK, reboot done.
if you CANT extract that image, make you ready for completly new install of your ROM.
Lincsbro said:
Thanks, I should have thought to do that sooner
Alright, here's my system info:
Model Number: SAMSUNG-SM-G730A
Android 4.4.2
Baseband: G730AUCUBNG3
Kernel Version: 3.4.0-1670137
[email protected] #1
Thu Jul 24 22:04:06 KST 2014
Build Number (My busybox installer said this was my rom, so it might be what you need): KOT49H.G730AUCUBNG3
Hope this helps you out
Click to expand...
Click to collapse
:good:
bejunk said:
sorry my llate reply, lets go
he bro u know whats the rom ) you say you are on stock rom, thats all i need.
clockwork mod is no rom, its a recovery.
sorry was a small hazzle for me as you use the AT&T version of the phone, now to the solution:
we need to just replace the damaged build prop with original one.
1. download the system image here: http://www.mrcrab.net/viewstockrom/19845-sm-g730a.html (or anywhere if u find, maybe at SAMMOBILE)
2. (try) to extract the parts of it, we need the system image. if u dont know how just google it, maybe some tools needed for diffrent kind of datas. once all extracted the build.prop is inside system (-folder). copy it to SD & replace via any ROOT explorer, set the right permissions, like in this pic LINK, reboot done.
if you CANT extract that image, make you ready for completly new install of your ROM.
:good:
Click to expand...
Click to collapse
I can do that, but I have a problem. I can't download the file from the link you provided. Could you find me a different place to download the image from, or maybe even give me a direct download link? Thanks.
Lincsbro said:
I can do that, but I have a problem. I can't download the file from the link you provided. Could you find me a different place to download the image from, or maybe even give me a direct download link? Thanks.
Click to expand...
Click to collapse
You can try Mr Google for that. just kidding, but seriously you can do that.
bejunk said:
sorry my llate reply, lets go ................ set the right permissions, like in this pic LINK, reboot done.:
Click to expand...
Click to collapse
Little help here, did Selinux news to set to permissive to make the permission become permanent? Because sometimes when I change a dir perm it didn't stick, it change back when quit i explorer.
Thanks in advance.
Lincsbro said:
I can do that, but I have a problem. I can't download the file from the link you provided. Could you find me a different place to download the image from, or maybe even give me a direct download link? Thanks.
Click to expand...
Click to collapse
@Naimlaaa is right , google for yor model SAMSUNG-SM-G730A firmware there are plenty sites about samsung, i have limited time at the moment..
Naimlaaa said:
You can try Mr Google for that. just kidding, but seriously you can do that.
:good:
Little help here, did Selinux news to set to permissive to make the permission become permanent? Because sometimes when I change a dir perm it didn't stick, it change back when quit i explorer.
Thanks in advance.
Click to expand...
Click to collapse
1st, whats your rom & phone model, because on my ROM theres no SELinux (enabled) & on my otherhandset it works all fine..
also what kind of perm. ?? system r/w or on files ??
bejunk said:
@Naimlaaa is right , google for yor model SAMSUNG-SM-G730A firmware there are plenty sites about samsung, i have limited time at the moment..
1st, whats your rom & phone model, because on my ROM theres no SELinux (enabled) & on my otherhandset it works all fine..
also what kind of perm. ?? system r/w or on files ??
Click to expand...
Click to collapse
i use slimkat 4.4.4 by android-andi on SGS3 Mini (i8190n).
1. using root explorer, changing perm on the first / (the root dir, i believe).
2. this one is new problem, nothing to do with our recent dialogs, hope can get some idea on this one.
yesterday, i install android tweaker app, and set the auto system/device tweak( can't remember exact) and reboot my device
to apply the setting. and got stuck on boot animation (blinking 'SAMSUNG' anim, after the 'GT I8190N' image on ori ROM). it
didn't loop (no bootloop), just stuck on blinking animation, boot image i guest?
Any idea just throw in please, really want to try and confirm on any solution we got in mind.
thanks in advance everyone.
I've been looking through a couple of xda thread about it, found a few solutions. I managed to unpack from the .tar file, got the img.lz4 file and from that the .img and from .img to .img.ext4, but the .ext4 file is too small compared to the original .img file, so I guess the older SVAImgUnpack doesnt do the job correctly and can't open it with ext2explore. Is there any other software to use for this?
Nevermind, I've found a program for it.
Dummen said:
Nevermind, I've found a program for it.
Click to expand...
Click to collapse
which program you used to extract, kindly share it, i need to extract modem files
hahmad78 said:
which program you used to extract, kindly share it, i need to extract modem files
Click to expand...
Click to collapse
I think it was this, Im not sure.