[Q] samsung kies update - Captivate Q&A, Help & Troubleshooting

there was an update available for my captivate
so i plug it in to my computer and used kies mini to update it.
but after the whole update it wont turn on...
when i try to turn it on it shows the at&t screen and the galaxy s screen like usual
but then it just turns black and nothing happens.. and i also figured out that its taking up my battery when its all black,,,
should i go into recovery mode and delete all user data? or how do i fix it?

bluemoon1221 said:
there was an update available for my captivate
so i plug it in to my computer and used kies mini to update it.
but after the whole update it wont turn on...
when i try to turn it on it shows the at&t screen and the galaxy s screen like usual
but then it just turns black and nothing happens.. and i also figured out that its taking up my battery when its all black,,,
should i go into recovery mode and delete all user data? or how do i fix it?
Click to expand...
Click to collapse
Were you running stock when you did the update?

something must of got courpted you can use a one click stock rom flash with odin, you can download it here. http://forum.xda-developers.com/showthread.php?t=731989
its pretty simple, start the program, than just put your phone in download mode (turn off phone, than hold vol + and - at the same time, with NOTHING ELSE PRESSED (DO NOT PRESS PWR) than while still holding the vol buttons down, plug it into your computer, it should go into download mode) this is a bit on the extream side, you will loose any internal data, (not the internal sd, only internal data) but if your locked out of your phone and your not rooted or able to get into clockworks, than this is the easiest way i could think of.

Related

[Q] Phone will not power on after failed Odin restore

I decided to upgrade to Cog2.2beta5 from Cog2.1.4 today using ROM Manager. Everything seemed to go well but after install and reboot all I got was a black screen and subsequent reboots landed me at the same result.
So I thought restoring back to stock with Odin One Click from this forum, the one with all the ROM files built right in, was the best next step. I downloaded Odin and followed the instruction to the T and it got stuck at the PIT step. After a few attempts at it now my phone won't even power on. I've let it sit without a battery in for several minutes and even charged it on a wall charger for 30 minutes just to make sure it wasn't a dead battery. Still won't power on or respond at all.
I'm fairly new to all of this... Any ideas on what would cause a total melt down of the phone to the point of not even powering on? It has been flawless for me since launch.
Didi you download the drivers? also did you unplug the phone while doing the flash>/
pull battery sim and sd if you have one
Wait a minutes or so
plug in USB
hold vol up and down
put in battery
If the phone does not immediately go to download mode, you have a fancy paper weight that doesn't even weigh that much.
chibixzero said:
Didi you download the drivers? also did you unplug the phone while doing the flash>/
Click to expand...
Click to collapse
I did download the drivers and from everything I could see, my system and Odin recognized the phone without issue.
I had to unplug it during the process because the process froze in the same spot for well over an hour. I didn't see any other choice.
l7777 said:
pull battery sim and sd if you have one
Wait a minutes or so
plug in USB
hold vol up and down
put in battery
If the phone does not immediately go to download mode, you have a fancy paper weight that doesn't even weigh that much.
Click to expand...
Click to collapse
Guess it's a paper weight then because the phone won't power up at all let alone go into download mode.
Thanks for your time guys.
sounds like you might have done exactly what i did with my first captivate and yes it IS bricked! i know you will read "its impossible" to do that but i "thought" i followed the correct steps and flashed only a pit file. what it does is repartition your file system but apparently nothing is added after that...
not sure what steps you took on odin but it sounds like you got the same error i did and then the same issue so im going to assume the same thing has happened here...sorry matey
tnt533 said:
Guess it's a paper weight then because the phone won't power up at all let alone go into download mode.
Thanks for your time guys.
Click to expand...
Click to collapse
I had mine hosed for a while and this is what I did to get it back.
When it is unplugged and everything is out of the phone (sd, sim, batt) , hold the power button down for 10 sec, then release.
Put in battery, hold vol up + vol dwn, Plug into different usb port, Plug into phone.
That should get you into download mode
Mine did this too and the steps mentioned fixed it for me
Sent from my SAMSUNG-SGH-I897 using XDA App
I too accidently only wrote the pit file and it wouldn't do anything at all just blank screen . Make sure you remove everything open Odin one click, plug in your phone with the USB cable, hold down volume up and down and plug in battery it should start in download mode. It does work.
Sent from my SAMSUNG-SGH-I897 using XDA App
samsung captivate wont turn on after failed odin update
got an at&t samsung captivate. I want to try on something new with this phone so I search on some articles on how change rom..
first got the download mode showing on my phone then i connect it to pc with odin3 already started, I click on start button however my phone just suddenly shut off. tried turning it on but nothing happens. tried 3 key combos still wont turn on, tried removing sim, sd and batt connect phone without batt then pushing vol up and down then inserting batt still nothing. tried charging it, no light came up, still wont turn on..i would like to ask some help if how to turn my phone back on..
sorry for bad English
thank you
boangon said:
got an at&t samsung captivate. I want to try on something new with this phone so I search on some articles on how change rom..
first got the download mode showing on my phone then i connect it to pc with odin3 already started, I click on start button however my phone just suddenly shut off. tried turning it on but nothing happens. tried 3 key combos still wont turn on, tried removing sim, sd and batt connect phone without batt then pushing vol up and down then inserting batt still nothing. tried charging it, no light came up, still wont turn on..i would like to ask some help if how to turn my phone back on..
sorry for bad English
thank you
Click to expand...
Click to collapse
What did you try to flash with Odin? (with version, variant #, with/without bootloaders)
What was the Odin log?
nothing, no roms yet. i was in the first part of the instruction. this is what i follow
1. Download and install the correct drivers below (mac and linux don't need drivers)
2. Plug in your usb cable to your phone and computer
3. Open Odin
4. Enter Download Mode (see below)
5. Click Start
6. Be Patient, the first boot will take a while
where can i find the odin logs?

Captivate I896 - Stuck on AT&T World Phone?

I have the Rogers Captivate - SGH-i896. I was following a tutorial on enabling tethering on my phone (on maggadget) but something went really wrong. I got Odin3 working, but when my captivate restarted, it got the a screen with "AT&T World Phone" and froze. I unplugged my phone and restarted it, but everytime I restart my phone, it shows the "AT&T World Phone" screen and doesn't do anything else.
I can still restart to go into download mode.
Have I just killed my phone? Does anyone have suggestions as to how I can get my phone back up?
1. take battery out and then put it back in.
2. open odin
3. Hold both up+down volume button the plug phone onto PC. Keep holding till see download mode.
4. release volume button then click start on odin
http://forum.xda-developers.com/showthread.php?t=731989
Make sure you have the drivers and you are using Odin properly. The one click method is very simple. Read carefully!
issues resolved, thanks for your help!
Brick captivate?
im stuck at screen and it wont let me in download mode, even with your button method please help
You might need to build/buy a JIG j.v.douts
A JIG is something physical that you plug into your phone to force it into Download Mode if it's still possible.
randy_c said:
1. take battery out and then put it back in.
2. open odin
3. Hold both up+down volume button the plug phone onto PC. Keep holding till see download mode.
4. release volume button then click start on odin
Click to expand...
Click to collapse
hi, I was resetting my rogers captivate i896 back to factory rom ( was at 4.3)using Odin,but after it was done my phone was stuck on the A T&T world phone screen and blinks on and off. To make matters worst, I cant get back into download mode as when I try the battery show up on the screen empty. Please help
Did you try a jig? Download mode is not affected by flashing ROM, so it's still there. Might just be having trouble with the manual way.
Sent from my SGH-I747 using xda app-developers app

[q] galaxy s tweak app froze my phone

my phone has been frozen at the samsung i9000 screen ever since opening this app.... i am very new to this do not understand most concepts here.. ie. flashing a rom. If anyone can help me get my phone out of this state or has any suggestions on how i should fix this please comment.
if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)
What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.
krtken said:
if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)
Click to expand...
Click to collapse
i can get in recpvery and download mode but have no clue really how to flash a rom.. i have odin and a few otehr files but i cannot get this back to normal.
Tehpriest said:
What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.
Click to expand...
Click to collapse
the app is galaxy s tweaks or something very simalar (black and white logo) the two options i was given in the app were "YES-BREAAAAK my phone" and "NO- Im not crazy" i selected no and then my phone just reset and wouldnt turn on again ive tried everything i can do without hooking up to a comp ( as far as i know) but thx for the advice
Where did you get this from? It does not seem to be in the market.
OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.
Tehpriest said:
OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.
Click to expand...
Click to collapse
Is telling me i need recovery code, I have never received one.
Just read this so it may work for you.
disconnect the phone from USB, pull the battery, replace it, boot into recovery mode and reconnect the phone. Go back to Kies and tools firmware recovery.
In other words repeat what you have done :-s
Original post on Android Forums.
The message indicated that I would need a recovery code that could be obtained later by clicking Tools | Firmware Emergency Recovery Menu.
I was then instructed to disconnect the phone, pull the battery, boot into recovery mode and reconnect the phone which I did. The phone would not reconnect. At this point I called Samsung tech support and wasn't impressed when I was simply told to repeat the procedure. But to my surprise, the upgrade was successful the second time around. Go figure! Anyway, I was wondering if anyone else ran into the recovery code message.
Click to expand...
Click to collapse

[Q] all apps are crashing

I installed Amimod that lets me change the transitions between apps, i ran it to change it to a cross fading transition and it said i had to reboot later to make the changes take effect. I kept that and mind and used some other apps. They all didn't load and gave me the "com.xxx.xxxx is unable to continue" type deal with the force quit button.
So i restarted my phone and now launcher loads but the pop ups come saying "com.android.phone is unable etc" or "com.android.media is unable...". There is no status bar and the phone doesn't lock. After about five minutes of trying to press the force quit button, nothing happens. I went into recover mode and cleared my cache but that didn't help.
[tldr] I can get my phone into download mode but is it possible to open the phone as a root folder on my computer so i could uninstall Animod and any changes it made? I don't want to master reset.
ROM reflash is only option.
I reflashed using odin but now its stuck in a boot loop with the att logo. When i plug it into the usb it loops the loading sign and the battery sign. What now?
Have you used odin before?
Which odin did you use?
What build is your phone?
Can you still get into download mode?
I have not used odin before this was my first time.
I used the one that is prepackaged with the .pit and .tar file "I897UCJF6-final-OCD-REV0.exe"
My phone was stock android that i rooted.
Cant get it into download with any button combo.
Under your battery left side on the white sticker. Your phone had a build number. Mine is 1008. 10 meaning 2010 08 meaning august. What is yours
Also tell me exactly what you have tried to get into dl mode
Build number 1011, and now my phone wont even turn on. When i hold the power button it is unresponsive, and its not dead i charged it.
Niwatori said:
Build number 1011, and now my phone wont even turn on. When i hold the power button it is unresponsive, and its not dead i charged it.
Click to expand...
Click to collapse
Looks like you will need to try to force the DL mode with the odin instructions or get a jig and see if that works
Download mode
remove all sd, sim, bat
Put bat back in
Hold volume up abd down
Plug in usb
In it works great, if not usb jig
Going forward do not use odin one click use this method
http://forum.xda-developers.com/showpost.php?p=10056254&po
i got it into download mode using the button combos (battery out then hold vol up and down etc) and used the odin 1 click downloader for captivate, but it failed twice.
It got to the point where I had to buy some resistors to make a USB jig. The jig worked fine and put it into download mode but Odin still failed...Twice more. Now my phone wont even show the logo when i hold the powerbutton and the jig doesnt seem to work anymore. Its not the battery because i charged it for a full night before i tried jigging it again.
I would try the non one click odin method now except that i cannot get my phone into download mode.
I have no idea what to do now, it seems like its completely bricked.
At this point (if I'm able to replace it) would the workers at samsung or att be able to access my data at all? I only had the phone for 3 months. And would my warranty be void for rooting/flashing?
Niwatori said:
At this point (if I'm able to replace it) would the workers at samsung or att be able to access my data at all? I only had the phone for 3 months. And would my warranty be void for rooting/flashing?
Click to expand...
Click to collapse
Hypothetically, yes and yes, but the reality is they will likely just wipe it and reflash it without ever looking at what's on it. Just tell them something went wrong when you tried to upgrade to Froyo via Kies. That's happened to enough people that they probably won't question it.

Access perhaps soft-bricked phone

Hi, I need some help or guides on a problem I just got.
I have a rooted S3 LTE (I9305), which seems to be soft bricked, if I understand what I have read so far. I need to either get it to work again, or at least a way to access files, so I can extract some data from it.
The situation is as follows:
I came home the night between sunday and monday, from a holiday, on which I had used the phone to take a lot of photos. At the point where I entered my car, the phone was working. I used the GPS to take, where I parked my car. Switched off the screen, and drove home.
When I got home, I could see the screen was hanging at the boot logo. So it must have crashed and rebooted it self at one point - don't know when.
Tried to restart 4-5 times, but only got to the boot screen. Pulled the bat. but still the same.
Suddently at one point, I couldn't even get to the logo screen, instead it just shows white and black stripes across the screen.
If I'm lucky I can get into download mode, but only around every 10 time or so.
I managed to keep it in download mode at one point, and through Odin wanted to re-flash my device, but it failed saying it need a pit file.
So this is where I stand now. Is there a way to access the phone from my computer, so I could download the photos taken, or can I flash it without loosing any of the photos and if so how?
if you have a custom recovery installed you could maybe try to plug it in to a PC and mount the USB storage via the menu
SammyPasz said:
if you have a custom recovery installed you could maybe try to plug it in to a PC and mount the USB storage via the menu
Click to expand...
Click to collapse
Which menu are you thinking about? The PC doesn't recognize the phone, as a device. Can't find it anywhere. And in the download mode, I can't do anything on the phone, or at least it doesn't reacts.
Anyone? I'm a bit lost here
Mhystique said:
Which menu are you thinking about? The PC doesn't recognize the phone, as a device. Can't find it anywhere. And in the download mode, I can't do anything on the phone, or at least it doesn't reacts.
Click to expand...
Click to collapse
Do you have a custom recovery installed like Clockwork mod or TWRP recovery manager?? If you have you'll be able to access it by switching your phone off then holding power up + home + power until you see the boot animation
SammyPasz said:
Do you have a custom recovery installed like Clockwork mod or TWRP recovery manager?? If you have you'll be able to access it by switching your phone off then holding power up + home + power until you see the boot animation
Click to expand...
Click to collapse
Offcause I forgot the phone at Work, so can't test to be sure. But if I recall correctly I have TWRP installed.
But don't think I can get into it. The only compination of buttons that I had success with, was volume down + home + power into the download mode, as I said. But that isn't even all the times I can get into that.
Update:
Yes, as I expected I couldn't start it with volumen up + home + power, all I get is the black and white stripes.

Categories

Resources