Hey there,
I just got my Topaz back from warranty as the digitizer was "broken".
They reinstalled a new ROM, which seems to be quite good for a stock ROM.
Anyhow, I went to Settings->Regional to change the clock to 24 hours (hate pm/am) and for some reason, it's all greyed out. As in, I cannot click it at all.
Any idea?
What's the value of:
HKLM\\nls\overrides\STFmt
'Hmm where can I check this HKLM\\nls\overrides\STFmt?
Through registry, using a registry editor.
h:mm:ss tt
Try to change it to:
HH:mm:ss
The 24 Hour thingy is now ticked in Settings, but it's still pm/am clock...
Have you made soft reset?
Yup, done a soft reset, still the same in Sense clock.
Have you deleted the "tt"?
Try also:
H:mm:ss
I've set it to hh:mm:ss and now it works.
Just, if for example the time is 08 in the morning, it won't display the 0. Yet, when it's after 12:00, as in 13:00, it will display fine.
Thanks for your answer.
Write "HH", not "hh" and delete "tt", if you haven't done it yet.
Use
hh:mm for 12Hours clock
HH:mm for 24Hours clock <-Case Sensitive
tt means AM/PM
H = No leading Zero (8:05)
HH = Leading Zero (08:05)
Registry Editor: here or here.
Related
After upgrading all is fine but time is now reported 15:00 INSTEAD OF 3:00 PM.
Any way to alter that?
Thanks
Start/settings/systems/regional
Make sure it is English (United States)
time/Time Style: select h:mm:ss tt
time style
It was set that way--but didn't change??
Try swithing it to another settitn hit ok to get out of it then repeat the steps? This worked on my KJAM should be same on you'rs
time style
It doean't CHANGE? When I was using original Cingular Rom it was correct.
I just reinstalled a couple of CABs of time style etc and did soft reset without help.
Wonder if there is registry tweaK??
The 24hr clock had been annoying me as well. Just did a little digging and seem to have the answer. I changed the registry setting below from a capital 'H' to a lowercase 'h' and all is well.
HKLM\nls\overrides\STFmt
h - Hours 12 Hour Clock with No Leading Zero
hh - Hours 12 Hour Clock with Leading Zero
H - Hours 24 Hour Clock with No Leading Zero
HH - Hours 24 Hour Clock with Leading Zero
m - Minutes with No Leading Zero
mm - Minutes with Leading Zero
s - Seconds with No Leading Zero
Ss - Seconds with Leading Zero
t - am/PM indicator - First Letter Only
tt - am/PM indicator - First Two Letters
ttt - am/PM indicator - First Three Letters
the lowercase version is in the regional settings.... scroll up it will show you h:mm:ss tt it will also show double hh but if you choose that you will get a leading 0 on antyhing less than 10.
This doesn't require a registy edit. I have changed this all 3 times I have reset and reflashed this rom in the regional settings.
Can anyone provide a hack to remove the battery icon from the top?
Thank you!
Chris
techsc said:
Can anyone provide a hack to remove the battery icon from the top?
Chris
Click to expand...
Click to collapse
For some strange reason, i haven't got that icon anymore since i installed some software i'm beta testing at the moment (i'm under NDA, so can't say what it is for now)...
Anyway, to answer your question: modify the following registry entries:
Code:
Show Time,Date,both or Battery on top bar at Today screen
[HKLM\Software\Microsoft\Shell\]
Time:
"ShowTitleBarClock"=1 / "TBOpt"=1
Date:
"ShowTitleBarClock"=1 / "TBOpt"=2
Both:
"ShowTitleBarClock"=1 / "TBOpt"=3
Nothing:
"ShowTitleBarClock"=1 / "TBOpt"=0
Battery:
"ShowTitleBarClock"=0 / "TBOpt"=1
Thank you!
I'll try it on my device.
Chris
do you also know the registry key to get one line for the date instead of two lines on the today screen?
thx!
VOODOOS!L said:
do you also know the registry key to get one line for the date instead of two lines on the today screen?
thx!
Click to expand...
Click to collapse
You just might have spent a usefull few minutes searching for this..... argh....whatever... here it is...:
Code:
Single Line date:
HKLM/SOFTWARE/Microsoft/Today
Create DWORD: "AutoSingleLineDatePlugin" Value = 1
Moaske said:
You just might have spent a usefull few minutes searching for this..... argh....whatever... here it is...:
Code:
Single Line date:
HKLM/SOFTWARE/Microsoft/Today
Create DWORD: "AutoSingleLineDatePlugin" Value = 1
Click to expand...
Click to collapse
thanks mate, have been searching for it, things like 'one line today date' or 'multiple date today' didn't came up with a reg key in this forum...so thanks!!
Wow I was looking for this for so long. But under WM6, it doesn't update the icons correctly when you disable it.. Any ideas?
search for kaiser tweak. has what you need.
the kaiser tweak is stickied on this forum...that will solve all your problems..
techsc said:
Can anyone provide a hack to remove the battery icon from the top?
Thank you!
Chris
Click to expand...
Click to collapse
The following registry hack will replace the battery indicator with the clock:
HKLM\Software\Microsoft\Shell\ShowTitleBarClock = 1
(From this page.)
won't go away
abubasim said:
The following registry hack will replace the battery indicator with the clock:
HKLM\Software\Microsoft\Shell\ShowTitleBarClock = 1
Click to expand...
Click to collapse
i have tried all the reg hacks mentioned above as well as kaiser tweak.
kaiser tweak settings:
title bar - battery / clock [clock]
title bar - clock settings [nothing]
date display - single-line
registry settings:
HKLM\Software\Microsoft\Shell\ShowTitleBarClock = 1
HKLM\Software\Microsoft\Shell\TBOpt = 1
anyone have any idea what am i doing wrong?
thanks
Update:
ok, i must be stupid. previously the 'nothing' setting was forced whenever i chose 'clock'. i reset battery/clock to 'battery' and the clock settings to 'date' and it worked, i now have the time and no battery icon. not sure why choosing 'date' translates to time.
Battery icons
can anyone supply me with the original icons supplied with kaiser. changed them now not very happy with new indicator, and silly me didnt do a backup before hand. thanks damien
how do you remove the wireless mgr. icon at the top?
tvos
sexpest said:
can anyone supply me with the original icons supplied with kaiser. changed them now not very happy with new indicator, and silly me didnt do a backup before hand. thanks damien
Click to expand...
Click to collapse
I have done this on an 8125 running wm6 and it works but not sure about your phone. Just delete the custom icon your not happy with and since the original icon is in the rom itself it will just pop back up with the original one.
Hope this helps
ok i'm stupid!
i cannot remove the battery icon and display only the clock on the top
I tried to change every possible setting but i'm either manage to display the clock and the battery or the battery only
How on earth i can display only the clock and remove the battery completely ??
"Great" do the following Regedit:
[HKLM\Software\Microsoft\Shell\]
"ShowTitleBarClock"=1
"TBOpt"=1
you may need to create a new DWORD value for "TBOpt"
what about removing the battery icon without changing the location of the clock.
is this possible?
The date on the title bar of my today screen doesnt show up right and I'm wondering how to change it. For example, today's date shows up as "5/14/0" rather than 5/14 or 5/14/08.
How do I fix this? I think its a registry issue. Also, this problem isnt ROM-specific.
start settings system regional settings
Thanks for responding. I actually tried that but it doesnt really resolve the issue. For some reason, the title bar isnt allowing enough space for the date to complete. I'm thinking it must be a registry issue.
try to edit the registry:
HKLM\nls\overrides
edit the SSDte value to ddd, MMM dd, yyyy
note:
dd - date
ddd - day (i.e. Wed)
dddd - day (i.e. Wednesday)
MMM - Month
yyyy - Year
then restart
you can make it shorter if you don't write the yyyy
i think we dont need to know the year
True. I'm willing to do w/o the year. Its weird that the last digit wont show tho. I take it nobody else has that problem?
Hello guys! there's anyone know a way to delete the icon battery on the top bar? I have installed batti 2.2 so now I dont need this battery icon (that sometimes appear and disappear while I use the pda).
thanks
stefano
what a pity! No tweaks, right (for now)?
HKLM\Software\Microsoft\Shell\ShowTitleBarClock
value="1" Time
value="2" Date
value="3" Date and Time
value="0" Nothing
When "3" also only Time
When key is not there, create it.
hello! thank you for your help but I had already test this tweak but without any effect. I had put the 3 value but nothing.
tnx
stefano
option "3" date and time doesn/t work
Create key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=hex:\
13,00,00,00
Works fine on diamond.
13 does give date and time (other values do different things I forget - search!)
Set date format in settings/system/region, else there's another key you can edit to set your own custom format:
[HKEY_LOCAL_MACHINE\nls\overrides]
"SSDte"="dd/MM"
"SDate"="."
"SCrcy"="R"
"IDate"="1"
"LCID"=dword:00000809
"S2359"="pm"
"S1159"="am"
Requires a reset to see changes - but diamond reset is pretty fast and u pretty much have to do it every day anyway...
PS: I set d.M as my format, but see a square (or part) after the month. Can reduce with spaces after the M, but it's not great. Any ideas on how to get a clean d/M, or d.M, or non truncated d-MMM format?
PPS: Search the forum if you don't know how to use a registry editor...
Thank you! Please, there's a value to remove the icon battery without substitute it with the date and hours?
bye!!!
stefano
Hi,
I use Resco Reg editor and I just want to know how you create that :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=hex:\
13,00,00,00
If I create it as a key, i will have [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\TBOpt]
and then, how I create the value 13,00,00,00
Is it a DWORD key on hex ?
It doesn't work for me sorry
You can use Advanced config for this. Search for this program and there will be an option to choose what you want(clock, date, time etc).
Link --> http://forum.xda-developers.com/showthread.php?t=317070
yeah, I looked, but it's okai if you want change the battery icon to date icon... but just dont remove the icon... It's strange
bye
stefano
Advanced Config.
steveweb said:
Hello guys! there's anyone know a way to delete the icon battery on the top bar? I have installed batti 2.2 so now I dont need this battery icon (that sometimes appear and disappear while I use the pda).
thanks
stefano
Click to expand...
Click to collapse
Use Advanced Config. 2.2 works with Diamond
nothing... I have already try this option of adv conf... but if I set "NO", the icons battery doesnt disappears!
thanks
stefano
Are there any small .cabs that remove the battery icon and replace it with the time? I would rather not install advance config that can change 200 things for this one little tweak.
i would like to see the battery/clock/sound icons out there.
SO silly to have a sound tray icon...since you access it with hard button.
Battery, there is much bette options than the default one.
Clock, well...
Krpano said:
i would like to see the battery/clock/sound icons out there.
SO silly to have a sound tray icon...since you access it with hard button.
Battery, there is much bette options than the default one.
Clock, well...
Click to expand...
Click to collapse
ummmm, what?
lol
Sorry, i wasnt clear.
I would like to see the battery icon removed from the tray too, aswell the sound and clock icons.
Ive been searching this for weeks, it seems impossible to remove them.
Since dayligth saving time switch (or whatever is that called in english), my xperia keeps rolling back time two hours behind.
I set rigth time or use timesync, but after some time, clock rolls back 2 hours ago.
Please help, my X1 is now unusable as alarm clock.
have you synced it with your pc?
yes, but time changes when it's not connected to pc.
Look in Settings/Phone/Time Zones.
Is the option "automatic change time zone and clock" off?
There is no that option in my rom.
Look in a registry editor for nitz
There should be two locations
HKLM\Software\OEM\PhoneSetting ShowNitzPage = 1 in DWord
This one probably set to 0, therefore you don't see the option.
HKLM\Drivers\BuiltIn\RIL NITZEnable = 1 in DWord
This one is the key that enables/disables the actual setting.
ShowNitzPage is already 1, but there is no tab for time zone.
Option is disabled.
Also, timezone dont get changed. It always stays at +1, just clock is reverting.
Anyway, seems it fixed by itself rigth now (clock didn't changed for hours), but what exactly causes that? I remember seeing simmilar thread on X1 forum, which means i'm not alone.
That has happened two times ot me and I never figured what was the reason. It fixed itself both times...
Problem happened again today and i figured out that i was lazy and didnt set xperioid clock and it seems it changed WM clock to its time which was wrong.
Sent from my XPEROID using the XDA mobile application powered by Tapatalk