Database Develop

[Q] E:Can't mount /dev/block/st110 ... my nightmare begin!

Hi! Here is the story of my nightmare... I have a Bell i9000m with Android 2.1. I have use GST tweaker tools to root it. I also have do a backup with titanium backup (but I think it useless at this step) After this I have try to change the battery icon with the same utility. When I have rebooted the phone, it stop at the "S" logo for a minute and after the screen go black and the button are glowing and the phone buzz. After this nothing happen. When I go in recovery mode (3e) I obtain an error:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions,
copy default media content failed.
I have try with odin3 1.7 to flash the phone but I'm a little bit confused with all possibility...
One stupid thing I have to say, I don't know my original firmware version... ;-(
I have see many good custom kernel... it is possible to fix this and by the way to upgrade to froyo?
It is possible to fix my problem doc?
Thanks a lot for your help!
P.S. Sorry for my bad english, (i'm from Quebec,Canada)

Easiest fix :
Go in recovery and wipe.
Then restart and see if that fixed your problem.
Alternate (Guaranteed solution) :
Go here
Click "Direct Download". If you don't see it try to refresh the page.
Fire up odin.
Extract the zip u downloaded
For pda in odin select the .tar you extracted
Put your phone in download mode.
Flash w/o repartition or nething.
That should work.

Hi! I have try the 2 solutions you mention. But always same problem... I have to mention I have installed speedmod-kernel-k12p-500hz it is correct or I have to replace it?

Ok then do this :
Get these two
Flash odin with repartition and select the pda,modem,csc
Once done
Go back to odin. Flash just pda with no repartition or nething of the jl2 (previous thing u downloaded in my first post).

Sorry for this question but what do you mean by nething? (sorry english is not my first language!)

So leave everything the way it is.
Dont check mark anything extra.

YEAH! You solved my problem!!! You rock man!
Before I do any other stupid thing any advice?
I have visit some european site about android. They offer some firmware.. it is better to keep the "bell" specific firmware?,etc...
I don't know if I already say this ... Thanks you!

Try them.
Now u know
exactly how to restore if nething ever happens

thenamelessthing said:
YEAH! You solved my problem!!! You rock man!
Before I do any other stupid thing any advice?
I have visit some european site about android. They offer some firmware.. it is better to keep the "bell" specific firmware?,etc...
I don't know if I already say this ... Thanks you!
Click to expand...
Click to collapse
Glad to hear you got your problems sorted. Maybe you could hit the "Thanks" button under Daneshm's post.

Daneshm90 said:
So leave everything the way it is.
Dont check mark anything extra.
Click to expand...
Click to collapse
Thank you! You indirectly helped me immensely!

thenamelessthing said:
Hi! Here is the story of my nightmare... I have a Bell i9000m with Android 2.1. I have use GST tweaker tools to root it. I also have do a backup with titanium backup (but I think it useless at this step) After this I have try to change the battery icon with the same utility. When I have rebooted the phone, it stop at the "S" logo for a minute and after the screen go black and the button are glowing and the phone buzz. After this nothing happen. When I go in recovery mode (3e) I obtain an error:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions,
copy default media content failed.
I have try with odin3 1.7 to flash the phone but I'm a little bit confused with all possibility...
One stupid thing I have to say, I don't know my original firmware version... ;-(
I have see many good custom kernel... it is possible to fix this and by the way to upgrade to froyo?
It is possible to fix my problem doc?
Thanks a lot for your help!
P.S. Sorry for my bad english, (i'm from Quebec,Canada)
Click to expand...
Click to collapse
this problem accure bcs of
1.you didnt remove bettry b4 flashing rom
2.some stoke filmware give you error message but if you flash with 521+pda+csc+modem file then tht problem is solve
and i found that I9000XWJM5 filmware is really good if somebody need it then pm me i all send zip file

Can anyone tell me how do bring back to life my phone??? I used this on my Vibrant and now my phone is DEAD!!! IT WON'T TURN ON AT ALL
ANY IDEAS??? PLEASE HELP!!! I KNOW I MADE A MISTAKE... ANYONE PLEASE

mobileoneexpress said:
Can anyone tell me how do bring back to life my phone??? I used this on my Vibrant and now my phone is DEAD!!! IT WON'T TURN ON AT ALL
ANY IDEAS??? PLEASE HELP!!! I KNOW I MADE A MISTAKE... ANYONE PLEASE
Click to expand...
Click to collapse
do u have download mode??
if not buy a JIG or send back to samsung

HELPPPP
azzledazzle said:
do u have download mode??
if not buy a JIG or send back to samsung
Click to expand...
Click to collapse
hi guys, i've follow this guide but my phone it's blocked from 15 minutes... any help please?

Daneshm90 said:
Ok then do this :
Get these two
Flash odin with repartition and select the pda,modem,csc
Once done
Go back to odin. Flash just pda with no repartition or nething of the jl2 (previous thing u downloaded in my first post).
Click to expand...
Click to collapse
.. ok. call me a n00b or w/e u want, but i understood everything up until that last part. when u go back to odin.
It would help if you can describe the set-up, because clearly i did something wrong... screenshots would help if possible /:
p.s. i have all the files downloaded from ur previous posts... i just need to know the order. also for the second download file, which file is the PDA file? the one with the word "CODE" in it? or i dont even apply that one .. ;;;

Hello, i've been having the same problem with my GT-i9003, and even after flashing with odin i still have the same problem. Well, it's not exactly the same, cause my phone will keep on a starting bucle if i try to start it without my EXTERNAL sd card (the one i bought), and if i start it with the external card in, it starts, but i can't use anything that uses the sd card (music, camera, 3g), so yes i can call and message and use wifi, but that's not how it's ment to be. Basically it's like i had no external or internal cards.
So everythime i try to flash without the external sd card, i get the mounting error, and if i flash with the external card, it seems ok , but i still can't use any of the things mentioned above.
I'm a bit lost, and i believe it's because i'm missing something (i'm new to this). i don't want to send it to samsung (yet)
i've been using the firmware that came with the phone, didn't try anything new.
to sum up: any attempts to flash with/without the external card are irrelevant, the problem persists.
Any thoughts/ideas/solutions?
thanks in advance.

Help Please I've Bricked my Samsung 8.9 wifi tab

Hi All
Today I thought I would try to install Jellybean on My tab, I am a total nube at this but thought I could follow the tutorial. First I rooted my tab, then tried to backup the tab but it didn't work and then I thought what the hell I'll just try it.
Now it just shows the black and white Samsung Screen and won't turn off.
When I go in to the Android System recovery a message shows - /cant access to ‘system/csc/XEF/system/
I've tried using Odin and all seems good but I can't get ClockWorkMod to appear on my tab.
I bought my tab in the UK but it got shipped from France so has default language setup in French If that has anything to do with it.
Please help, I've tried following some threads on here but some of it seems to be out of my depth. Could someone explain in simple terms how I can get my tab back to normal?? It would be very much appreciated. I'm so annoyed at myself :crying:
Thanks in advance
Mike

Seems like you dont have root for some reason... there is a all in 1 guide in general section, u might wanna check that out... then install CWM and after that a new rom after installion clear dalvik and data.

JU57FL1P said:
Seems like you dont have root for some reason... there is a all in 1 guide in general section, u might wanna check that out... then install CWM and after that a new rom after installion clear dalvik and data.
Click to expand...
Click to collapse
Thanks for your reply, I've been looking at the All in 1 guide but it does confuse me a little, could you explain how I install these as I've been trying to fix this all day and haven't gotten anywhere.
Thanks

Help its getting worse!
I read that all for one help guide and decided to flash the pit file since nothing else was working, now my tab is stuck on the android downloading screen and wont go off it, I can't even get it to go in to recovery mode! Help!!!!!!!!!!!!! :crying:

Ummn u need to use odin to fully restore ur tab, wait for someone to provide u with the files... i dont have enough experience with odin...

JU57FL1P said:
Ummn u need to use odin to fully restore ur tab, wait for someone to provide u with the files... i dont have enough experience with odin...
Click to expand...
Click to collapse
Thanks, can someone please help me with these files please I'm desperate. :fingers-crossed:

Right, I've been looking at this for 2 days now.
I've noticed that their is a CSC file option on Odin, I'm also in the middle of downloading the stock rom P7310XWLA2 which is the French version of the ROM.
So when it has downloaded should I try to find a CSC file as well as the PDA file to send to my tab?
Please Help :fingers-crossed:

MikeMcGrathXmen said:
Right, I've been looking at this for 2 days now.
I've noticed that their is a CSC file option on Odin, I'm also in the middle of downloading the stock rom P7310XWLA2 which is the French version of the ROM.
So when it has downloaded should I try to find a CSC file as well as the PDA file to send to my tab?
Please Help :fingers-crossed:
Click to expand...
Click to collapse
ok I've loaded the stock rom P7310XWLA2 from odin there was no seperate csc file
But the tab started to load up 3 things came up with failing to mount data and cant mount your storage is not prepared yet on updating application, applting Multi CSC and installing multi CSC
The tab then rebooted and all looked well until the tab asked 'Entrer mot passe' which I think is enter you password i entered 'samfirmware.com' but it says desole - sorry
Any ideas please???

MikeMcGrathXmen said:
ok I've loaded the stock rom P7310XWLA2 from odin there was no seperate csc file
But the tab started to load up 3 things came up with failing to mount data and cant mount your storage is not prepared yet on updating application, applting Multi CSC and installing multi CSC
The tab then rebooted and all looked well until the tab asked 'Entrer mot passe' which I think is enter you password i entered 'samfirmware.com' but it says desole - sorry
Any ideas please???
Click to expand...
Click to collapse
Or should I just install the uk stock rom?
Im really going round in circles here and could really use some helpful advice, please :fingers-crossed:

Oh my god I've fixed it!
Finally got there in the end thanks to this tutorial phew :good:

MikeMcGrathXmen said:
Or should I just install the uk stock rom?
Im really going round in circles here and could really use some helpful advice, please :fingers-crossed:
Click to expand...
Click to collapse
Luckily I've never had to use ODIN with my Tab, however back in the days on my SGS I used it a lot.
So just a few things: you don't have a CSC file, because your tab is a Wifi only model, so don't worry about that.
Also, be sure to tick the re-partition box on the left if you are using a pit file (which at this state you should), this should repartition your internal SD and thus have a clean install.
Good luck

Thanks, but i've got it working and I'm not gonna mess round with it again.
Can't believe i finally got it working!

[Q] MD5 doesn't match

I've downloaded alliance rom and ultimate rom over 20 times md5 doesn't match.
Why is like that?Before i had htc one x and i've never had this kind of problem .
Who's fault is it and what i suppose to do to get the match?
My onternet connection is OK for sure so any suggestion?

Bad download.. Try again.. Or extract the file with something like Winrar.. If Winrar if able to extract the file with no errors then you are safe to flash
Tapatalking on my n7000

i used winrar it says crc error i'm stock i mean since 2 days i can't download a file with rom i have no idea what to do with that shi..

its a 758 MB file .. is that what you see when download starts?
where are you downloading from ? Sourceforge?
try the Alpha build?

I've got the same problem on stock rom and Rocket rom. I've redownloaded it tons of time. while small file like Philz kernel is fine. I've tried using both winrar and 7zip, Both reported back with crc error and file corrupted. I don't think the file on server have problem because I do search in each forum and not found who have the same problem. I've also try many way to download like using Chrome direct download and JDownloader, All of my attempt result in the same broken file problem. I have stable cable internet. I don't know what else can be source of problem. Some said the HDD with bad sector can cause this so I've change the download location to other 2 HDD and there's no different. On another place have been talking about this error and suggest to repair file using winrar but I don't want to flash the broken file in to my phone. anyone know what happened and how to fix this?

ilakya said:
... I have stable cable internet...
Click to expand...
Click to collapse
Following your arguments and tests I guess that this statement is to optimistic or uses the wrong word. Stable yes, reliable no.

Since few days I've downloaded a lot of ROMs for tests, ThaiDai,Glory, Sweet ... No problem MD5. It's comm link issue.

Is your connection fast enough to download such huge files? I have downloaded so many roms before never had a issue
Sent from my GT-N7000 using Tapatalk 2

Please Help

my mobile rooted and i uninstalled phone
now i cannot dial any number and no mobile coverage
i tried factory rest and recovery from the computer and same problem
before uninstall i backup the file but when i try to install the file it give me program not installed
anyone can help me please ???

hanyh80lg said:
my mobile rooted and i uninstalled phone
now i cannot dial any number and no mobile coverage
i tried factory rest and recovery from the computer and same problem
before uninstall i backup the file but when i try to install the file it give me program not installed
anyone can help me please ???
Click to expand...
Click to collapse
Man... you really know how to make someone laugh to tears
Maybe its enough re-install the phone app, if not, you'll need to flash your phone.
Right now my phone's not here to send you the apk.
Thanks for the good moment :crying:

prehichm progress
RuedasLocas said:
Man... you really know how to make someone laugh to tears
Maybe its enough re-install the phone app, if not, you'll need to flash your phone.
Right now my phone's not here to send you the apk.
Thanks for the good moment :crying:
Click to expand...
Click to collapse
man i said i tried to install the apk and the phone give me the "application not installed"
tried to factory rest from the software and volume down and power bottom
factory rest cannot resolve the problem
even from computer lg tools same problem
i need flash tools

AW: Please Help
Flash tools are attached on the index in my signature. Get a kdz from lg-phone-firmware.com and follow the tutorial.
Gesendet von meinem Transformer mit Tapatalk 2

hanyh80lg said:
man i said i tried to install the apk and the phone give me the "application not installed"
tried to factory rest from the software and volume down and power bottom
factory rest cannot resolve the problem
even from computer lg tools same problem
i need flash tools
Click to expand...
Click to collapse
You can try to download the phone .odex and .apk from here:
http://www.4shared.com/rar/hhACqE0Y/O4X_Phone.html
After extract them, copy them to "device/system/app", try to install them from there.

hanyh80lg said:
my mobile rooted and i uninstalled phone
now i cannot dial any number and no mobile coverage
i tried factory rest and recovery from the computer and same problem
before uninstall i backup the file but when i try to install the file it give me program not installed
anyone can help me please ???
Click to expand...
Click to collapse
This is good Very bad problem you got there kind sir.:laugh::laugh:

Issue with Lollipop ROM file for G800H

Hello guys! Ii'm having an issue with the ROM file for the G800H. I''ve already downloaded 5 times and everytime I open it and try to extract it, it always gives me an error of file corrupted. 4 out 5 times I've downloaded through Sammobile and 1 other I've downloaded from another server with the same error. Anyone had the same issue or error?
PS: It happened with wither the Russian or the Indian Version of Lollipop

Eslf said:
Hello guys! Ii'm having an issue with the ROM file for the G800H. I''ve already downloaded 5 times and everytime I open it and try to extract it, it always gives me an error of file corrupted. 4 out 5 times I've downloaded through Sammobile and 1 other I've downloaded from another server with the same error. Anyone had the same issue or error?
PS: It happened with wither the Russian or the Indian Version of Lollipop
Click to expand...
Click to collapse
try downloading it from mobile then extract it on the mobile too then copy it to the pc and flash it
also make sure you dont resume the download sometimes its causing this

Thanks for the input, but I kinda "solved" it another way. At first I was trying to unzip the file with WinRAR and it was throwing the 'Corrupted File' error everytime I did it. After a few attempts, I've tried with 7-Zip and it worked fine with the same file. Funny thing is, that I've never received this error in any other ROM file I had (and I switched ROMs in a few different devices).

Eslf said:
Thanks for the input, but I kinda "solved" it another way. At first I was trying to unzip the file with WinRAR and it was throwing the 'Corrupted File' error everytime I did it. After a few attempts, I've tried with 7-Zip and it worked fine with the same file. Funny thing is, that I've never received this error in any other ROM file I had (and I switched ROMs in a few different devices).
Click to expand...
Click to collapse
Well,Life is strange