So i rooted my Captivate I-987, used rom manager to backup my stock rom and flashed Axura on. I wanted to change roms to try new things out and i hit recover in the clockwork mod recovery mode, and it didn't go back to the original. So now the only working zip file on my phone is axura and i want to know is there anyway to get the original ATT stock to work, i know there is ODIN but i'm a little unsure on how to use it. Any help is appreciated, and i know there are posts about Odin but i was wodering if someone can help with the clockwork recovery possibly.
Pegleg2060 said:
So i rooted my Captivate I-987, used rom manager to backup my stock rom and flashed Axura on. I wanted to change roms to try new things out and i hit recover in the clockwork mod recovery mode, and it didn't go back to the original. So now the only working zip file on my phone is axura and i want to know is there anyway to get the original ATT stock to work, i know there is ODIN but i'm a little unsure on how to use it. Any help is appreciated, and i know there are posts about Odin but i was wodering if someone can help with the clockwork recovery possibly.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731989
**Backup your apps first using Titanium backup**
ODIN is really easy to use once you know how to use it. First, download the correct drivers and ODIN as the OP says in the thread. Fire up ODIN after your download has finished.
Next, take out your sim card. Don't connect your USB cable to your phone yet. If you are on Axura currently, what you can do is long press the power button and boot into download mode (you will see the option along with power off and reboot). Once your phone is in download mode, ODIN will say "added!". If your phone is currently turned off, you can try pressing both volume buttons and connecting the USB cable to your phone and continue pressing the buttons until you see the download mode screen. Again if you do it right, ODIN will say "added!"
Once ODIN recognizes your device, press start and watch the magic happen! Your phone will be back to stock. It will lose root as well but you can re-root it easy.
PS ... get used to doing this. Flashing back to stock is always recommended before you flash a new ROM. Will save you lots of headaches.
No you can not get back to stock with out odin. If you used rom manger it would no doubt cause problems. When you flash a rom it can change stuff on the phone that can only be reset through odin. Its a clean slate for a rom and prevents most errors.
Sent from my SAMSUNG-SGH-I897 using XDA App
Related
I rooted my phone like couple of month ago, then I updated the new AT&T partial update then today, I ran the froyo 2.2 update through the rom manager everything went ok but when i tried to use the rom manager again to restore my app. it restored then when it rebooted it came to the AT&T screen then froze, i tried to put it in recover mood but i could not, I had to take the battery off to force to power off, then when i put the battery back and power on it only come to the AT&T screen and froze. I do not know what to do?
1. Download Odin One Click to Stock JF6.
2. Launch Odin
3. Remove the battery from your phone
4. Plug the phone into the computer
5. Hold down both volume buttons
6. Put the battery in the phone while still holding both volume buttons
After step 6 the phone should enter download mode and Odin should have a box that says: COM:# and then press start. It should flash you back to JF6.
I Could put it in the download mode but everytime i use the odin it fails
haithamelbedawy said:
I Could put it in the download mode but everytime i use the odin it fails
Click to expand...
Click to collapse
Is Odin able to recognize your phone when you plug it in?
Try running Odin as an administrator.
i even tried that and it did not work out
haithamelbedawy said:
i even tried that and it did not work out
Click to expand...
Click to collapse
Are you using a rear usb port on your pc? Do you have the correct drivers for Odin?
finally i been able to reset the phone to a factory restrore, I did not do anything different than what I used to but i guyess I just needed to keep trying.
Now if I want to install the froyo 2.2 on my phone what do you recommend me to do?
Thanks all for your help
haithamelbedawy said:
finally i been able to reset the phone to a factory restrore, I did not do anything different than what I used to but i guyess I just needed to keep trying.
Now if I want to install the froyo 2.2 on my phone what do you recommend me to do?
Thanks all for your help
Click to expand...
Click to collapse
Go to development, select a rom, download the .zip file, but do NOT rename it to update.zip and just copy it over to the root of the sd card.
I would recommend reading!
1. Root
2. Download Rom Manager
3. Flash CWM
4. Reboot into recovery
a. Install packages
b. It'll bring you back to 2e recovery
c. Install packages again and it'll load CWM Recovery
5. Install .zip from sd card and select the rom.zip
Make sure you have the three button recovery or can use a jig before flashing Froyo, I recommend Perception ROMS, they have most bugs fixed and DG gives great support, also he made a nice kernel. The ROM is I9000 Froyo based and it works great. I've tried out several other ROMS but some have too many bugs, for me, or are too vanilla. I ran Tayutama's ROM for quite a while. I am waiting for CM6.1 to be less buggie, I'd love to try it but I need a working phone.
Can I be able to run Froyo 2.2 on my phone without rooting my phone?
haithamelbedawy said:
Can I be able to run Froyo 2.2 on my phone without rooting my phone?
Click to expand...
Click to collapse
yes
http://forum.xda-developers.com/showthread.php?t=797282
but i have to ask, WHY??
Just wanted to know, you do not recommend it or what is your opinion?
haithamelbedawy said:
Just wanted to know, you do not recommend it or what is your opinion?
Click to expand...
Click to collapse
there are much better options than the leaked FroYo. custom roms have been streamlined, and crafted together to give us a better FroYo experience. i would recommend just about ANY custom rom over the leaked 2.2
do you recommend a specific one?
i did that and it never came back could not get to recovery, ithink that if you do get a second chance, be sure that you are in usb debugging mode first
ronf1011 said:
i did that and it never came back could not get to recovery, ithink that if you do get a second chance, be sure that you are in usb debugging mode first
Click to expand...
Click to collapse
Thanks for the advice
haithamelbedawy said:
do you recommend a specific one?
Click to expand...
Click to collapse
right now i am on assonance rom, and i will probably bounce around because i like to try them all out.
Hey everybody. So I rooted by phone following the instructions from theunlockr.com and their "how to root the samsung vibrant/captivate"
and then followed the instructions on their "how to load a custom rom on samsung captivate/vibrant"
Now what exactly do I do? I mean I kind of understand ROMs but if I want to install 2.2 what should I do? Is Cognition a good choice? How exactly would I install that? Also if I install 2.2 would I be able to go back to 2.1 when the official is finally released? I understand enough to mod my phone but not fully enough how to change it back if I mess up. So could I please get some help?
Also:
- What new things can I actually do w/ 2.2?
- Will I have to reinstall all my apps? Contacts?
Thanks in advance!
Download rom manager from market free version
To option flash clockwork recovery
Select captivate
Turn phone off
Vol up and down and power
When at&t comes up let go
Should go into recovery
Select reinstall packages
Brings you back to same screen
Reinstall packages
Should bring you to green recovery
Reboot phone
Power off phone
Remove bat, sim, and external sd
Put bat back in
Usb plugged into computer
Vol up and down hold plug usb in
Should have an orange android with a shovel, you are in download mode
Pull bat, put everything back in boot phone
If you can not do every thing listed I would hold flashing anything
Make sure you have usb drivers for phone installed and pc can see your phone
Don't forget to use Titanium Backup first so you can recover your installed apps. I use ODIN JF6 With 3 Button Fix to get back to stock.
There are a lot of good ROM's out there. I've been really happy with di11igaf's 3.0.2, but it's best to see what the people are saying in each thread and make an educated choice.
walkah21 said:
Hey everybody. So I rooted by phone
.....snip.....
Also:
- What new things can I actually do w/ 2.2?
Thanks in advance!
Click to expand...
Click to collapse
Streaming porn!
lol, I can attest to this
I have been able to previously flash custom roms such as Cognition V.2 and Cappy's GingerBread ROM, but just recently i tried to flash Cognition V.3 on my Captivate and im unable to even enter recovery mode to flash the new ROM. Ive tried all ways to get my phone in recovery mode including the power button and volume button idea. And when i do try to flash to recovery mode, the ATT world phone screen comes up and it seems to freeze on that screen until i remove the battery.
How can i get out of this problem? Any questions, just ask because im not the best at describing things like this.
If you backed up everything use odin to flash to stock and proceed from there.
I probably should have told you that i only have a mac...im stuck arent I?
Any way you can use boot camp to boot up windows?
I ran into a similar problem some time back when trying to install an upgraded rom. For whatever reason, I had to reinstall Rom Manager to get the clockwork recovery to work. Dunno if you use anything like this, but just a thought.
Additionally, if you get rom manager you can reboot into recovery through it, as opposed to using the traditional method.
its strange because even from rom manager when i press the button to send my phone into recovery, it still goes to the att screen and freezes..
Google heimdall sgs. Program to flash stock on mac. Not as easy as odin
So ive just tried to install heimdall on my mac and it says it cannot run because my mac is not updated...i ran an update scan and there are no new updates and im also running the most up to date OS for mac. What do i do??
You are going to have to ask that question on the heimdall thread
So I put Andromeda on my phone a few weeks ago. It went fine, no problems, liked it. So I went to put it on my wife's phone. I was able to get it rooted. Into download mode, and Odin on it. But I couldn't get it into recovery. Vol up/dn/pwr just booted the phone normally. Vol up/dn does work to change the volume settings normally so it's not a bad button. So I thought, I had mine on stock 2.2 when I did everything. So I hooked hers up to Kies and put 2.2 on it. Rooted it. Now I cant' get the phone into download or recovery mode. Vol up/dn, plug in usb not working, it just goes into battery charge mode. We got our phones the same time so they're both same hardware rev. Any ideas?
TIA,
Scott
This should probably go in the q&a section. But did you try the three button fix. Search the forums for it.
Sent from my GT-I9000 using XDA App
slevy951 said:
So I put Andromeda on my phone a few weeks ago. It went fine, no problems, liked it. So I went to put it on my wife's phone. I was able to get it rooted. Into download mode, and Odin on it. But I couldn't get it into recovery. Vol up/dn/pwr just booted the phone normally. Vol up/dn does work to change the volume settings normally so it's not a bad button. So I thought, I had mine on stock 2.2 when I did everything. So I hooked hers up to Kies and put 2.2 on it. Rooted it. Now I cant' get the phone into download or recovery mode. Vol up/dn, plug in usb not working, it just goes into battery charge mode. We got our phones the same time so they're both same hardware rev. Any ideas?
TIA,
Scott
Click to expand...
Click to collapse
I donot know whats causing the problem (dont have the knowledge) but i can suggest buying a usb jig (costs only 8$ including shipping) which is pretty cheap and useful considering if you change roms frequently.
U just plug in the usb and the phone goes into download mode and you good to go.
If u wana buy just google mobile tech videos and buy it from their website (the guy john selling it is a rom reviwer on xda so its a safe site to buy) or on ebay. hope this helps
Sent from my GT-I9000 using XDA App
so its back to stock 2.2 ?
try using rom manager to boot into recovery.
note with 2.2 stock it has 3e recovery. to install cwm you must root and replace with 3e hacked recovery
use rom manager to boot into recovery. from cwm you can tell the phone to reboot into download.
or if you still have a custom rom, you use the advanced power menu (power button menu) to select download or recovery. no button tricks needed.
Trusselo said:
so its back to stock 2.2 ?
try using rom manager to boot into recovery.
note with 2.2 stock it has 3e recovery. to install cwm you must root and replace with 3e hacked recovery
use rom manager to boot into recovery. from cwm you can tell the phone to reboot into download.
or if you still have a custom rom, you use the advanced power menu (power button menu) to select download or recovery. no button tricks needed.
Click to expand...
Click to collapse
3e recovery can be a bit of a pain, it is easier to Odin one click to 2.1 with the 3 button fix and go on with that.
The other solution would be to go with Team Komin's Ursa Minor kernel. There's a video posted on the forum (and youtube) by AdamOutler (I think that's his name) on how to do it - very clear and easy to follow.
@ Trusselo, I don't mean to go against your suggestion. I went through the 3e recovery myself and it can be a pain for a newbie so I'm giving him/them a second opinion/suggestion
the 3e instructions are written like crap. i asked the OP to change it but no.,...
its actually super easy if you have root explorer. (google *cough cough*)
use root explorer to mount RW then drop the file over the old one.
done
@ bwolf_56 Oh and no offece to you but he cant get into download mode to flash the Ursa kernel from odin... so...
Trusselo said:
the 3e instructions are written like crap.
its actually super easy.
use root explorer to mount RW then drop the file over the old one.
done
Click to expand...
Click to collapse
Yup, they're. I had to go through the replies to find the actual good way to do it and even then it wasn't so clear.
Once you know how root explorer works, then go ahead and use the 3e recovery but I wouldn't suggest that to some1 new to all of this I mean, you don't wanna replace the wrong file either (or even worst, delete system files).
Either way, It's up to you OP - both solution works great. I hope we helped
EDIT: lolol - I guess w/o dl mode, my way doesn't work so well You can try one of the 3 ways to get in dl mode, the one that works best for me is:
1. Turn off phone, remove battery, sim card
2. hold down both volume button
3. plug the usb in (while holding both volume still)
4. A nice triangle with a Android holding a shovel should show up
If that doesn't work. My apologize and go ahead with the 3e recovery that Trusselo suggested. You can pm me for clear instruction (and probably Trusselo as well)
Thanks all for suggestions....
so its back to stock 2.2 ?
Yes. And I believe I got it rooted with Superoneclick because it has superuser on it.
it is easier to Odin one click to 2.1 with the 3 button fix and go on with that
Exactly what I'm trying to do. But can't get into download mode or 3-button recovery mode. Neither are working. I didn't try the abd server method. Looked a bit scary, but may try it this eve.
use root explorer to mount RW then drop the file over the old one
Forgive me. Root explorer from market, right? 'mount RW' ? Drop what file over what old file?
use rom manager to boot into recovery. from cwm you can tell the phone to reboot into download.
So mount the SD and copy cwm to it and rename to update.zip. Get Rom manager from market and that will get me to cwm to get to download mode to use Odin to go back to 2.1. Then root again and install rom manager again to get into recovery to load the Andromeda? Is that close?
odin one click isnt 3 button fix
3 button fix is a flash you use with the NON one click odin
root explorer is from the market... (can also be *found* on google [for testing purposes])
3e recovery fix is a file you must replace. xda search it!
rom manager will download and copy the update.zip for you! so you dont need to do it frist. its the first button in the app! Rom manager also has a button. "boot into recovery" use it to boot into recovery...
so flash to 2.1 with 3button fix (regular odin) 2.1 no 3e recovery forget that.
root
install rom manager to get cwm
cwm flash your new rom
delete rom manager.
sounds like you need to do more searching and reading...
Trusselo said:
odin one click isnt 3 button fix
3 button fix is a flash you use with the NON one click odin
root explorer is from the market... (can also be *found* on google [for testing purposes])
3e recovery fix is a file you must replace. xda search it!
rom manager will download and copy the update.zip for you! so you dont need to do it frist. its the first button in the app! Rom manager also has a button. "boot into recovery" use it to boot into recovery...
so flash to 2.1 with 3button fix (regular odin) 2.1 no 3e recovery forget that.
root
install rom manager to get cwm
cwm flash your new rom
delete rom manager.
sounds like you need to do more searching and reading...
Click to expand...
Click to collapse
Little question here, why would you delete ROM manager after?
@ OP - Please read some more before trying what has been suggested here. Trusselo gave you a good rundown which isn't too hard to do (there are also vid on it). A little reading could save your android, that coming from a guy that is usually hasty to act (notice how I bricked my 1st cappy )
most custom roms have CWM built into the kernel. rom manager and the update.zip with cwm are no longer needed with one of the cwm kernels.
and custom roms usually have the advanced power menu. boot to recovery/download easy peisy
rom manager only confuses people if you have both. took me a couple weeks to learn that..
bricked my first one too, kinda, (coulda fixed it) but couldn't wait and had it only days, easy exchange with in-store dummies.. lol
So I looked at Rom Manager on my phone.
Since the wife's on stock 2.2 and rooted. Seems that I can just d/l Rom Manager on her's. Copy the new rom to the SD. And use Rom Manager to flash it.
Can it be that simple?
And yes, I've been doing alot of reading. But, some of you guys talk a different language.....
Thanks again.
Scott
For future reference, this is not Dev-related and should have been posted in the related sticky in Q&A.
Miami_Son said:
For future reference, this is not Dev-related and should have been posted in the related sticky in Q&A.
Click to expand...
Click to collapse
Ya, wasn't real sure where to put it. Apologies. If you want to move it.....
Scott
Moved to proper forum.
slevy951 said:
So I looked at Rom Manager on my phone.
Since the wife's on stock 2.2 and rooted. Seems that I can just d/l Rom Manager on her's. Copy the new rom to the SD. And use Rom Manager to flash it.
Can it be that simple?
And yes, I've been doing alot of reading. But, some of you guys talk a different language.....
Thanks again.
Scott
Click to expand...
Click to collapse
No, it's not that simple, on 2.2 with the 3e recovery you will get a signing error when trying to flash and it won't work. Follow the suggestions and just use odin with the 3 button fix to get to 2.1
To get into download did you try removing battery from captivate, start Odin, plug USB cable to PC and captivate, hold both volume keys, and reinstall battery? On Stock that's the only way I can get into download. There is a thread on here with more detail but that's how I do it.
Sent from my SAMSUNG-SGH-I897 using XDA App
talbtimber said:
To get into download did you try removing battery from captivate, start Odin, plug USB cable to PC and captivate, hold both volume keys, and reinstall battery? On Stock that's the only way I can get into download. There is a thread on here with more detail but that's how I do it.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yep, tried that one.
Spent a couple hours on this last night. I isntalled Rom Manager. That will get the phone into recovery. But, since it's 3e, doesn't do me any good. Signature errors. No matter what I do, can't get the phone into download mode. Last night I even tried with adb. The phone just reboots normally with the adb reboot download command.
I know your gonna say there is the 3e fix, keep reading. I found it. But, really didn't understand it. And I don't want to brick the phone. I think the wife is going to be staying on stock 2.2 at this point. I don't know what else to do.
Thanks to all.
Scott
Try and make or buy a jig?
Buiding a JIG is quite simple and cheap, you should try it.
Also, you can pm me for 3e recovery. I'll give you a nice rundown - It's quite easy, just not well explained on the thread
Help please, I have previously flashed FireFly ROM onto this Captivate and Onix Recovery was on it. I wanted to return it to stock so I booted into recovery, wiped and restored. The problem is that that was not a good backup I guess and freezes when it boots up. I now try to flash the stock ROM or any ROM and the recovery simply freezes up.
What do I do? I can't backup or restore anything as it freezes. System will not unmount I noticed.
Do a search for the Rogers stock 2.2 firmware and flash with ODIN. It's not hard to find!
deacfire said:
Do a search for the Rogers stock 2.2 firmware and flash with ODIN. It's not hard to find!
Click to expand...
Click to collapse
Would Odin be a safe choice at this point?
http://forum.xda-developers.com/showthread.php?t=1007276
Try this. Its exactly what your looking for.
Don't forget thanks button if I helped!
mrhaley30705 said:
http://forum.xda-developers.com/showthread.php?t=1007276
Try this. Its exactly what your looking for.
Don't forget thanks button if I helped!
Click to expand...
Click to collapse
Don't I have to be in Android for Odin to work? I can't boot to a ROM.
i had a similar issue, flash the rogers ROM, http://forum.xda-developers.com/showthread.php?t=1007276
Unfortunately you'll then have to root again, change the recovery (3E), install clockwork and you'll be back in business
Go into download mode then use the odin included with the Rogers stock link. Make sure you add the PIT file, and the ROM into the PDA section.
To get into download mode i think its vol down and power, im not too sure to be honest, do you have a jig?
With froyo bootloaders I believe the proper way you can get to download mode is by removing Battery, SIM, MicroSD. Then put in the battery. Holding the volume up/down buttons, plug in the USB cable to your computer. Make sure Odin is open and running under administrator before you plug the phone in
Thanks so much all. I am not used to Odin and such so I was confused. It is a friend's Captivate. I have flashed things with Odin before and somehow forgot that I need to be in download mode and not in Android for USB Debugging, was confusing it with Fastboot, oh I feel dumb.
Oh well.
I think we are good now.
Thanks again!
I believe this to be a more complete thread:
http://forum.xda-developers.com/showthread.php?t=979133
Edit: Nevermind