Related
Need some help trying to figure out how to make my Captivate turn on...I press power and get the AT&T slash screen and then the galaxy s logo loads for about 3 minutes and goes to blank dark screen with the capacitive buttons lit. this is not good because my **** won't boot into recovery either
You should flash to stock then...pull battery, hold volume buttons and plug in usb with odin loaded and ready on the computer. There's plenty of threads to help you out
Sent from my phone so excuse the spelling errors
Funnily enough... My phone just did that too. I was installing Mort Widget and it just totally bricked...
I'm rather p!ssed at this...
Course this was after it deleted all my email accounts and SMS.
What you'll need.
Odin (search or look in any of the ROM/Firmware threads, for example the i9000 ROM or unofficial JH2 or JH3 ROM)
Your USB cable.
The firmware files.
Steps:
Remove battery, SIM card and micro SD card.
Open Odin on the computer.
Put the battery back in.
Plug in the USB cable to the phone.
Hold both volume up and down.
With VOL up/down held in, plug usb cable to the computer.
Your phone will show the beloved DOWNLOADING yellow image.
Odin:
Simply select the rom/firmware you want to flash to and enjoy.
I can confirm this will not overwrite the phone's internal 16gb storage, which is where most apps save backups to.
Future steps:
Before trying anything crazy, copy the entire phone internal 16gb storage to your computer. If you brick, you can always get a new captivate, copy the junk back and run a restore.
I recommend Titanium backup (donate the $6, the backup/restore is SUPER SUPER fast) along with Clockwork recovery. Clockwork's Nandroid makes full kernel backups and you can boot to recovery from the phone itself. No more adb reboot download or adb reboot recovery.
sorry for my english i have a 19000m the one from bell my phone boot with the GALAXY S LOGO WITH THE MUSIC BUT AFTER THAT BLACK SCREEN CAN I REPAIR THAT ?
Yes, odin is about your only hope here... Even if you boot into the bios and try to do a factory reset it will come up with error after error...
Reflashing will totally wipe and start fresh.
I am curious however. I think i isolated where my problem came from but I am still curious...
Did you try to sideload anything?
It happened to me twice with Bell's Vibrant version. The first time, just after one week after getting it (not rooted). They simply gave me a brand new one.
The second one took 3 week to go dead. Knowing my way around Linux Embedded systems, this time I investigated the issue. In recovery mode, there were error messages saying that the system could not fine the internal flash memory partitions. I could confirm from the kernel messages that partitions on internal sdcard had disappeared. I did factory reset, reflash original stock firmware with Odin, but it did nothing.
I Sent the phone back for repair and three weeks later, they gave me another one (probably refurbished!!).
My phone just turns on, with a black screen and the capacitive buttons lit up. Nothing else happens. When I try to go into download mode, it only goes back to this black screen. I does however detect that the phone is connected driver wise on the computer, but does not show up in Hemidall or Odin. I've tried just about everything
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
isa.ahmed said:
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
Click to expand...
Click to collapse
Does it light up or display anything and then go black, or does it just do nothing? If it does nothing, you're probably bricked, but try this anyway just in case your phone still has some life in it:
open Odin; press and hold both volume buttons and plug in your USB. If Odin lights up yellow, flash.
If that doesn't work, buy or build a jig, use it, and see if it goes into download mode. If it doesn't, plug the cable in anyway and see if Odin recognizes it. If it does, flash.
If that doesn't work, you're probably bricked. JTAG or Unbrickable Mod are your options from here, neither of which I personally know anything about but you can search around and find someone who can help you.
Hard Bricked= No signs of life, black screen no matter what, no response to USB plug in. Nothing but Unbrickable mod or JTAG will fix, I WOULD SUGGEST getting Unbrickable because you only have to get it once, and it cost the same as JTAG.
Soft Bricked= DL mode access is available(by jig or button combo and usb), recovery too, has some life in it. Can use ODIN/HEIMDALL to fix it.
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
isa.ahmed said:
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
Click to expand...
Click to collapse
If you got a green light, I would think it should at least turn on. However, if it was a successful flash, it should charge with the phone off. A bricked phone and a bad charger would both look the same: dead.
Try a different charger or battery if you think your battery could that dead. However if your battery died during your flash, that could also be the cause of your brick.
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
isa.ahmed said:
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
Click to expand...
Click to collapse
A jig is worth trying, but I suspect it will not solve your issue. You are correct, you need to send it to someone to have it fixed. Send a PM to AdamOutler or Connexion2005 and they can point you in the right direction.
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
isa.ahmed said:
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
Click to expand...
Click to collapse
You moto defy never flashed boot loaders since Motorola always had them locked down, and if you didn't know what you were doing flashing the stock Emma's that had boot loaders then it is not the phones fault. You should never really have to flash boot loaders and that is the ONLY risky part in flashing on these phones. Other than that Samsung cappys are almost TRUELY unbrickable (HARD BRICK) unless you mess up flashing boot loaders. WHICH YOU DID WHETHER YOU KNEW IT OR NOT BY FLASHING THE STOCK ODIN. SEND IT FOR UNBRICKABLE MOD, it is cheap repair and you WONT run into your same mistake ever again.
Sent from My KickAss CM7 Captivate
so no way i can do it here?
need to send it?to who i send? and who to trust?
i found some one will do for 50$
http://www.mobiletechvideos.com/blog/?page_id=776
Adam Outler
Sent from my SGH-I897 using xda premium
and other issue, i never toch the bootloader of it
i only re flash the OS of it only..and end with black screen.
this gay he will do what?
can the agent do it?
as it will be easer than to send it
can i have link of who will do it
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
alxpowa said:
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
Click to expand...
Click to collapse
Without download mode (VOL Down, Home, Pwr) then your only options is to either send it in for repair or try to get download mode working with a homemade Jig.
More on that Here.
I heard story's of people of forcing it to go into download mode using heat as well from say a hair dryer. But I do not recommend that.
"I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device"
Click to expand...
Click to collapse
Also I'm just curious as how you used odin without even having download mode? I'm having my doubts that when you said I know this question has been asked many times but you have not found a good answer is true. Next time do a bit more reading before just flashing your device. If you have even 1 thing your not sure about when flashing your phone that's 1 to many.
Puzzled also .
First question has to be can you actually get the phone into download mode .
Thats the big yellow download sign .
That has to be your first step get download mode on your phone .
Odin does not work without download mode so if no download mode who knows what you where trying to achieve or did achieve .
jje
No, I could get it in download mode BEFORE attempting to flash. Then I started Odin.
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
alxpowa said:
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
Click to expand...
Click to collapse
Remove Kies and reinstall that will make sure the drivers are OK .
Get into download mode if 3 buttons fail then you need the jig as posted.
Could try removing battery go to three button download mode and as you are holding down the buttons stick the battery back in to see if it enters download mode .
jje
Thanks guys for all the tips...! But nothing seems to work. It's just stuck at the connect error icon (?) and when I try to go in download mode either way, it just loops. (Icon appears and dissappears)
Two more questions:
1) If i have to get it repaired, do I contact Samsung or my provider ? (Bell in this case)
2) I'm at ease with electronics and stuff, so the jig should't be too hard to do for me, but is it guaranteed to work ? I mean, is it software-independant. Is there a problem that I can have that would prevent it to work ?
Thanks again!
Will work. Had the same issue as yours were I could not get into download mode and the phone would not boot either. The jig saved my phone. You can make your own or you can buy it on ebay. Good luck.
Good, should have all that at my job. Will try it.
Finally, it turns out that I called Bell and they told me that this was a common problem with these devices and they are sending me a new one!
Well.. whatever it was! haha
Thanks again for the help though!
I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App
I've Had my cappy for something over a year and up until i finally got a working jig it was out of commision for about a month, Then all was saved with the jig and i reflashed stock and started from scratch trying new roms, Then, when trying to go from stock to apex using their own odin flashers, Then when it went back into recovery i hit reboot to begin using CWM. Then all of a sudden, The Gingerbread version of the softbrick screen comes up, Phone----!-----Computer. No worries i have my jig, then when i remove the battery, wait and put the jig back in . . . the phone just shows me a bricked screen again, with a jig i know worked. What have i done?
SnowBlind182 said:
I've Had my cappy for something over a year and up until i finally got a working jig it was out of commision for about a month, Then all was saved with the jig and i reflashed stock and started from scratch trying new roms, Then, when trying to go from stock to apex using their own odin flashers, Then when it went back into recovery i hit reboot to begin using CWM. Then all of a sudden, The Gingerbread version of the softbrick screen comes up, Phone----!-----Computer. No worries i have my jig, then when i remove the battery, wait and put the jig back in . . . the phone just shows me a bricked screen again, with a jig i know worked. What have i done?
Click to expand...
Click to collapse
If by "bricked screen" you mean the Phone--!--Computer screen, you should be able flash back from that screen. In theory, ODIN should recognize your phone at that screen in a manner similar to the way it recognizes it at the normal download mode screen.
As long as you see the computer/phone symbol you should be able to get it reflashed with the J6 Oneclick. If it never appears in ODIN try all of your USB ports. Odin only sees my phone on the two rear ports, go figure.
As far as getting the yellow download screen goes you might consider some other key combos before you declare it non-functioning. Did you flash it back to stock J6? If so, did the 3-button stop working? That may be your issue. Also, you may have put boot loaders on it from another device such as an I9000 and changed the key combo while flashing another ROM. Try battery pull/replace with vol up and USB, vol down and usb, both up/down with USB and see if any of those work.
Hi guys,
I'm in a problem with my GNote... I am (or was) running Android 4.0.4 stock from Samsung, then today completely out of the blue the phone froze and I had to reset, then it was stuck in the Samsung Galaxy Note logo screen. I tried removing the SIM and SD card, etc but nothing. Then I tried reinstalling the ROM via Odin but it got stuck in "Writing NAND...". Then I read in a forum that I could try a repartitioning with the PIT for my memory size (16 GB). I tried this but it got disconnected in the middle (the cable connector is a bit unstable) and now I can't get it to boot ANYTHING. The screen is completely black and Odin doesn't recognize the phone, can't get into recovery mode, etc.
Any idea? My tel company told me that it has a little marking that looks like the phone was hit and so they can't accept it for warranty tech service. I will try Samsung Service Center directly but before that, is there anything I can do???
Thanks!!
Chaostar said:
Hi guys,
I'm in a problem with my GNote... I am (or was) running Android 4.0.4 stock from Samsung, then today completely out of the blue the phone froze and I had to reset, then it was stuck in the Samsung Galaxy Note logo screen. I tried removing the SIM and SD card, etc but nothing. Then I tried reinstalling the ROM via Odin but it got stuck in "Writing NAND...". Then I read in a forum that I could try a repartitioning with the PIT for my memory size (16 GB). I tried this but it got disconnected in the middle (the cable connector is a bit unstable) and now I can't get it to boot ANYTHING. The screen is completely black and Odin doesn't recognize the phone, can't get into recovery mode, etc.
Any idea? My tel company told me that it has a little marking that looks like the phone was hit and so they can't accept it for warranty tech service. I will try Samsung Service Center directly but before that, is there anything I can do???
Thanks!!
Click to expand...
Click to collapse
Is it starting up? If note just remove ur battery for around 10 mnts, then insert that try pressing vol down + power + home for 20 seconds and then press vol +, just check if ur pc could detect the device and also if the battery is enough charged.
If this detects ur device, u have chances or else only jig is the option.
Hope 4 the best
Press THANKS if this helped u :fingers-crossed:
I don't think even jig is an option now... the phone screen is completely black, it doesn't even get into the logo screen... going to Samsung right now.
jig mite help you.. cuz even when the phone doesnt boot up .. the jig mite force it to download mode.. check with that.. if not then get it to the samsung service.. how did u reset... were u rooted? stuck on NAND write is not a good sign
Chaostar said:
I don't think even jig is an option now... the phone screen is completely black, it doesn't even get into the logo screen... going to Samsung right now.
Click to expand...
Click to collapse
Why not?
The Jig costs 2-3 US$ from Ebay, China...
Give it a try, its simple:
- remove battery
- put the Jig in
- wait a bit and put the battery back
- wait, pull battery out, pull Jig out
- connect the phone via USB to your PC, put battery back and start Odin
And if you are a lucky man you can flash a new firmware via Odin.
If you have an corrupt bootloader, Jig helps.
If there is a hardware problem you need a new maniboard.
How you described your Note there is possible only a corrupted bootloader ( Jig ) or a dead mainboard ( Samsung repair ).
Hmmm I'd say there is some serious problem. Originally (yesterday) my Note was working OK and then spontaneously (I didn't do anything or bump it or anything like that, I was just writing an email) it froze and so I used the reset combination (power+home buttons), then it entered into boot loop, it started and when it got to the Galaxy Note logo it rebooted, it did this 2 or 3 times and then it was stuck in Note logo. I took out the battery, put it back in, the same. I waited 10 minutes with the battery out, again the same results.
But I could get into recovery mode, so I tried re-flashing my ROM (LRQ Samsung stock from Germany, this was the only flash I did in my Note since last year when I bought it, I had 2.3.6 and then last month I updated to 4.0.4 via Kies official download and then using Odin I flashed the LRQ Samsung 4.0.4 stock because it has new features like the 3D gallery) but it got to "Writing NAND..." or something like that. I tried this several times and it was always the same.
So I read somewhere that I could try repartitioning the memory using Odin and the PIT file for my memory size (16GB), I tried this but just when I was in the process, the USB connector (which is a bit loose in my Note) disconnected for a second and reconnected and it was all. Phone dead. I'm guessing there's nothing there in the memory to boot from or to... so I'm taking it to Samsung.
Chaostar said:
But I could get into recovery mode, so I tried re-flashing my ROM (LRQ Samsung stock from Germany, this was the only flash I did in my Note since last year when I bought it, I had 2.3.6 and then last month I updated to 4.0.4 via Kies official download and then using Odin I flashed the LRQ Samsung 4.0.4 stock because it has new features like the 3D gallery) but it got to "Writing NAND..." or something like that. I tried this several times and it was always the same..
Click to expand...
Click to collapse
bro Chaostar
your Gnote is totally got a called ( brick ) same my gnote but it is revive via repartition.. with 2GB loss
first you do is make sure your battery is full charge and forced your Gnote into DOWNLOAD MODE.....
how to forced to download mode?
1 press home button + volume down then press power button,, if result is not lucky...... go to second way
2 use jig for download mode
(a) remove batt,,
(b) then attach the jig to usb port
(c) then put back the batt,,, then wait almost 60second
(d) after 60sec, remove jig then press volume up,..... one press only.... it shown black screen but the system status is download mode.
(e) open odin pc, connect your Gnote,,, see and wait.. if you see your gnote is detected,,,, your welcome you have a chance.. then flash kernel only ( safe_CM9_kernel.tar) then reboot to recovery then flash the JB:CM10:HYBRD] PARANOIDANDROID [2.20 or follow the repartition procedure,,
( f) what if not detected?.......... don't worry..:highfive: i have last option for you... this is revive your Gnote via (JTAG)..
GUDLUCK and see you..
Well I already left my Note in my cell company, it is within warranty period and I hope they can fix it. The only problem is that it has a slight marking that looks like a bump on the side and they said that this could void the warranty, but they will give me a budget if it has to be paid for, I hope they don't have to change the whole mainboard, and if they want to charge me I'll take it to Samsung directly as a last chance. After that, I guess it's jig.
What really gets to me is that this started as a sort of spontaneous error, I didn't do anything to the phone before the initial freezing and unability to boot. The problem is that then I tried the PIT stuff. Well, let's see what happens.
Thanks for your suggestions!!
Chaostar said:
After that, I guess it's jig.
Thanks for your suggestions!!
Click to expand...
Click to collapse
ABOUT JIG''... HERE THE INFO...http://droidangel.blogspot.com/2011/05/how-to-make-samsung-galaxy-s-download.html
about JTAG .. here the info,,http://www.youtube.com/watch?v=d0SX3iDuIZc&feature=youtube