Related
hey guys and girls.
after repeated uninstall / install I cant get Samsung Kies to run.... installs ok then when running I get
exception has been thrown by the target of an invocation... error at object 'label1' in markup file
'MSC.Thunder.UI component/controls/exceptionpopup.xaml#
any ideas ?
when selecting USB storage mode on phone and plugging in - it displays my 2 drives on phone but will not allow me to open them (have external sd card as well)
TIA
Cant help you with the first part, got similar problems with KIES.
As for the 2 drives not being accessible, i had that too. On the phone you can drag down that bar on the top to reveal the buttons and info. If you do that there should be some USB message, and when you click that and option to Mount the drives. That should give you access to them.
thanks sorted the drive issue...
the kies problem is going to stop me going froyo at the end of the month though....arrrgghh!
im on Tmobile UK.
will they update it in the shop if you take the phone to them ?
many phone companies does offer that service free of charge.
not sure about Tmobile UK though.
you don't need Kies to flash Froyo
when it does comes out officially you can install it via Odin, or Heimdall, or Clockworks, or many other methods
please help me :- after our long wait for 2.2 to become avail for my galaxy s i was over the moon when i was 'allowed' to upgrade but to my horror when downloading to the phone windows vista decided it didn't recognize my device and terminated connection.
ive tried a few things since to try to rectify , i've deleted then reinstalled kies , kies was also telling me to go into recovery mode which my unit doesn't do , the phone & pc communicate fine to upload & download reg media etc it just seems that when digging android is doing his thing on my screen the pc decides NO!!!!!.
Also after each attempt to upgrade the phone seems to be un-affected and will boot & work without any problems.
As i said before please help as i bought android rather than sellout to you know who and all my 'i' mates are laughing.........
i'm desperate guys please help or point me in the right direction.
ongy69 said:
please help me :- after our long wait for 2.2 to become avail for my galaxy s i was over the moon when i was 'allowed' to upgrade but to my horror when downloading to the phone windows vista decided it didn't recognize my device and terminated connection.
ive tried a few things since to try to rectify , i've deleted then reinstalled kies , kies was also telling me to go into recovery mode which my unit doesn't do , the phone & pc communicate fine to upload & download reg media etc it just seems that when digging android is doing his thing on my screen the pc decides NO!!!!!.
Also after each attempt to upgrade the phone seems to be un-affected and will boot & work without any problems.
As i said before please help as i bought android rather than sellout to you know who and all my 'i' mates are laughing.........
Click to expand...
Click to collapse
It might be your antivirus or any other program using/ connected to your phone other than kies.
You can do few possible things, of I can think of
1. Turn off your antivirus during upgrade
2. use another USB cable
3. restart the mobile
4. check if you can copy/ paste files from/ to mobile/ computer
5. If yes, you should be able to upgrade through Kies
6. Sometimes Samsung server is down
If it doesnot help, let me know
many thanks I will try this asap
well ive tried the anti-virus & firewall thing with no effect,is there a coinsidence that my model doesn't have 3 button reset and this problem? unfortunately im not pc savy enough to know where the files are on the pc to copy n paste. i did try a diferent cable & after each attempt to ugrade & device not recognized the phone will only start after ive whipped the battery out ...........................so once again any help would be great , thanks.
ongy69 said:
well ive tried the anti-virus & firewall thing with no effect,is there a coinsidence that my model doesn't have 3 button reset and this problem? unfortunately im not pc savy enough to know where the files are on the pc to copy n paste. i did try a diferent cable & after each attempt to ugrade & device not recognized the phone will only start after ive whipped the battery out ...........................so once again any help would be great , thanks.
Click to expand...
Click to collapse
Dear I am not sure what wrong there, as you said 3 Button combo is not working, I would suggest to enable it 1st from here
http://forum.xda-developers.com/showthread.php?t=810686
Once it is working, you will be able to flash/ install any firmware
maybe If you open Kies as Administrator, it might solve your problem or 1st repair the windows using windows CD and then open kies as Admin and try the same process. I hope you understand I am just guessing what might be the problem with your PC
I'm having some problems upgrading my wife's phone. I went to the website with the upgrade instructions, downloaded Kies mini, and installed all of the drivers for the phone. I put the phone in usb debugging mode and plugged it in, but Kies doesn't see the phone. I tried messing around with some settings (i don't remember what I did) and it worked one time. And the one time it did work, it said something like unsupported device and the upgrade phone button was greyed out. I've tried searching everywhere for an answer to no avail. I don't know what I'm doing wrong
Did you use the USB port on the back of the PC?
No, I used one of the ports on the front
What sort of configuration was the phone running before you tried the update. Any customization? Rooted?
no customizations, unrooted
Make sure in the USB setting it of set to Kies (Fireware Update). This is under settings/applications
Sent from my SAMSUNG-SGH-I897 using XDA App
I did that. when I did switch it to kies, it said I had to turn off debugging mode. After i switched it to kies mode, i turned debugging back on. Should I not have done that?
the_KEV said:
I went to the website with the upgrade instructions, downloaded Kies mini, and installed all of the drivers for the phone. I put the phone in usb debugging mode and plugged it in, but Kies doesn't see the phone.
Click to expand...
Click to collapse
May I ask why did you put the phone in debugging mode? You don't need to. You should do what Viper 714 suggested. Have you ever used Kies before this attempt at updating the firmware?
Feel free to PM me and I'd be happy to assist you.
clemmie said:
May I ask why did you put the phone in debugging mode? You don't need to. You should do what Viper 714 suggested. Have you ever used Kies before this attempt at updating the firmware?
Feel free to PM me and I'd be happy to assist you.
Click to expand...
Click to collapse
I have never used kies before this. I didn't think I needed it. The instructions says debugging mode should be enabled.
Captivate Froyo update crash and how to solve
Note my device is an ATT Samsung Captivate S SGHi897
Kies would crash on the update indicating a conflict AMINIFUS.EXE from the AMINIFUSREQLEV component. Also sometimes, kies would not present the upgrade screen althought KIES sees the device memory/drives.
Here's what fixed it for me.
On the device - go to settings / development turn ON USB debuging and turn ON Allow mock locations.
With KIES running - the Capivate USB screen may not appear when you connect your USB cable. But the upgrade screen KIES will appear and start your upgrade.
IF you have a external SD card - remove prior to the update. I was able to update with my external SD card installed but when the device rebooted the device screen would go to black AFTER the ATT and Capivate splash screens and appear to hang. I removed my external card - rebooted the Capivate and the device was able to work this the initial Froyo set up screens - then the external was fine.
Samsung is aware of this problem and fix is not widely known. I person I spoke with at Samsung only discovered this fix on his previous call.
Good luck everyone. Froyo is finally OH and lastly = ATT will be rolling out an over the air update for those who do not want to go through KIEs.
You should definitely remove your SIM and external SD before flashing any new firmware, as a matter of Due Diligence.
I'd give it a try first with it disabled.
Oh yeah I forgot to mention that when the phone is not in debugging mode, the phone says it's connected to kies, but kies says no phone is connected
clemmie said:
You should definitely remove your SIM and external SD before flashing any new firmware, as a matter of Due Diligence.
I'd give it a try first with it disabled.
Click to expand...
Click to collapse
OK I'll try again when my wife gets home with the phone. would it be a good Idea to uninstall everything and start from the beginning?
I did it with usb debugging on. The important part id make sure your in Touchwiz. Otherwise keis will not see the phone.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
shinji257 said:
I did it with usb debugging on. The important part id make sure your in Touchwiz. Otherwise keis will not see the phone.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
did kies automatically see it or did you have do anything after you plugged in your phone?
I suggest using the full KIES application itself opposed to KIESmini.
If you do a quick google search (or even search the forums here) for KIES you will soon come across a download link for the full KIES application.
KIESmini has been known to have issues with 64bit operating systems. So check into that as well.
I run Win7 64bit and I could not get KIESmini to work. It would crash (stopped responding error) every time the device was connected. So I downloaded the full KIES application and the problem was solved... Everything updated fine.
clemmie said:
May I ask why did you put the phone in debugging mode? You don't need to. You should do what Viper 714 suggested. Have you ever used Kies before this attempt at updating the firmware?
Feel free to PM me and I'd be happy to assist you.
Click to expand...
Click to collapse
I had the same problems. Not only do you need to turn on debugging but also allow mock locations.
RaptorOne3 said:
I suggest using the actual KIES program itself opposed to KIESmini.
If you do a quick google search (or even search the forums here) for KIES you will soon come across a download link for the actual KIES application.
KIESmini has been known to have issues with 64bit operating systems. So check into that as well.
Good luck..
Click to expand...
Click to collapse
Unless you modify the built in Access database for Kies, it will not recognize the i897 as a supported device.
Back when I used to check for updates with Kies Mini frequently I always had trouble getting the phone to talk to Kies Mini. What I found worked the best is as follows:
1. Restart the PC
2. Restart the Phone
3. Disable Bluetooth on the phone if it is enabled
4. Put the phone in "Kies (Firmware update)" mode in Settings | Applications | USB Settings
5. Plug the phone into a USB port on the computer that is not on a root hub shared by any other devices (especially a keyboard or mouse).
6. Launch Kies Mini
Step 5 is very important because the phone must negotiate a USB 2.0 connection. I found that steps 1 & 2 were almost always necessary, without a clean boot on both devices, I frequently had problems. Step 3 seemed to help, though sometimes I could get the phone to connect to Kies Mini with Bluetooth enabled. I was able to get it to connect in either Kies "Firmware Update" mode, or USB debug mode. The documentation may specify USB debug mode because Bluetooth has to be disabled for USB debug mode.
I think I got it!! I uninstalled everything. Then I just did what everyone said. Used the back of the PC, made sure the phone what kies mode, with debugging, and mock locations, removed sim card and sd card...but then kies kept crashing. Then I found another post somewhere that said to uninstall IE9. I did that and now its finally working! Thanks yall for your help.
anyway I can add solved to the title?
Just as a disclaimer up front, I haven't worked with Windows in years, I'm a complete Linux user, so don't assume I know anything. I'm not used to messing around with device drivers or searching for software on the web etc. Where Windows is concerned, I'm your 80 year old Grandmother, ok?
Ok, so with the Gingerbread firmware rolling out, I decided it might be time to try and get my Tab working with Kies. I got access to a windows machine, and went to work. Here's what I did (just in case I messed up somewhere):
Connected the Tab to the windows machine via USB, and selected mass storage device.
Windows mentioned something about needing drivers, which seemed weird (isn't the Tab a normal mass data storage device when told to be one?), but after a few seconds it claimed it was ready to use, so I went ahead and mounted it and could see my files in the Windows file browser. So far so good.
I then disconnected the Tab from windows and went looking for Kies. After some short struggle I was able to download and install it.
Next, I connected the Tab again, this time selecting 'Samsung Kies' mode. Nothing happened, neither on the Tab nor on the Windows machine.
Tried again, this time as 'Media Player'. Nothing happened.
Tried again, in Mass Storage Device mode. Kies tries to connect, then tells me to try again in Kies mode. I do so. Nothing happens.
After some googling, I try with the external SD card unmounted, as that seems to be recommended. No difference.
I told Kies to reinstall the device drivers. No difference.
I've rebooted Tab and PC. No difference.
What am I doing wrong? Can someone who uses his Tab with Windows maybe post a step-by-step howto?
I'm interested in this too as I'm having the exact same problem. If I connect as a mass storage device, I get an error that it needs to be in Kies mode. If I connect in Kies mode, Kies sees the device and shows the status as "connecting" but never actually connects. On the Tab, it says that it's connected though. I've tried this on Win XP and Win 7. Same behavior both times.
Interesting, you're already a step ahead on me. I don't get anything in Kies Mode, no connecting, nothing. I've tried on a 64bit Vista system and a 32Bit Win7 system, but no difference. In Kies mode, I don't even get the 'device plug in' sound in windows.
Care to tell me how you got Kies to at least see the Tab in Kies mode? What version of Kies are you using, etc.?
I'm using a rooted GSM (euro) Tab on Swisscom network and Kies V2.0.0.11014_49_2
I think I've cracked it. Firmware update is installing on my Tab as we speak.
What did I do? Seems really simple. I went to the Connections and Network Settings on the Tab, and in USB Connection Settings, I changed it from 'ask on connection' to 'samsung kies'. Upon plugging it in, it told me that it had to disable Bluetooth to enable the USB connection (never seen that screen before), so I allowed that, and windows immediately scrambled for device drivers and Kies show the connecting sign at the top left.
I'll keep you posted on how it went.
UPDATE: The installation process ran through, and Kies instructed me to disconnect and reboot my Tab. I did. However, it nows hangs during the boot sequence, at the stage where the blue 'SAMSUNG' logo is shown. From time to time, the Tab vibrates like it does when an application force closes, but it doesn't seem to finish booting. I fear I may have bricked my Tab. Trying to go through the recovery menu now.
Ok, factory reset from the recovery menu brought it back to life. No Gingerbread as of yet, but the XXJMF version of Froyo.
Rapax said:
Connected the Tab to the windows machine via USB, and selected mass storage device.
Windows mentioned something about needing drivers, which seemed weird (isn't the Tab a normal mass data storage device when told to be one?)
Click to expand...
Click to collapse
No, unfortunately not.
Back to the overall question - I had similar problems when I bought my Tab in the tail end of last year (Win7 64bit) and had to do some strange combination of attaching the Tab and starting Kies mode on the device before starting Kies on the PC (and dancing a jig while singing the Jingle Bells, you get the picture)
Today I installed the latest version of Kies and it all seems to just work. Therefore it might be worth updating your Kies version (or perhaps I'm just lucky this time through!)
I take it back, same old problem of never connecting unless I plug in the Tab before I start Kies on the PC, sorry for the noise!
I am having no luck whatsoever. I'm rooted if that makes any difference at all. My process has been going like this:
Plug Tab into computer. Wait until I see the screen that says Kies is connected.
Fire up Kies on my computer. Under Connected devices I see "connecting."
That is as far as I get. I never get further than that and I've tried it on Win7 (64 bit) and XP (32 bit) with the exact same results. I've re-installed the driver twice and rebooted both the Tab and the computer multiple times. Kies tells me it's the latest version so that's not an issue. Supposedly there is a Froyo update out there that fixes the screen orientation issue, but I can't get it. Frustrating. This should not be that hard. The fact that there are this many people all having the same issue just proves how half-baked this software is IMO.
Did you try without the SDcard? Seems Kies doesn't play nicely with external SD.
Rapax said:
Did you try without the SDcard? Seems Kies doesn't play nicely with external SD.
Click to expand...
Click to collapse
I didn't. I can't think of why that would make a difference, but I'll try it when I get home. Can't hurt anything.
Rapax said:
Did you try without the SDcard? Seems Kies doesn't play nicely with external SD.
Click to expand...
Click to collapse
Seemed to make no difference at all on the Win 7 machine or the XP machine. Goes to connecting and never actually connects. My Tab says it's connected. Kies never does connect on my Win 7 (64 bit) or on XP (32 bit). Frustrating to know that there is an update available that fixes issues I'm having, but I can't get it.
I've just got this problem too.
My solution: set the usb connect type in your tab to "kies" from "ask when connected". It solved my problem.
Sorry for my english.
[edit] Well, I read the whole thread and realised you found the same slution. Nevermind, at least I tried to help.
sisa7 said:
I've just got this problem too.
My solution: set the usb connect type in your tab to "kies" from "ask when connected". It solved my problem.
Sorry for my english.
[edit] Well, I read the whole thread and realised you found the same slution. Nevermind, at least I tried to help.
Click to expand...
Click to collapse
I tried that, but it didn't work for me.
I have factory reset and unrooted.
Removed the micro-SD card.
Changed to "ask when connected."
Nothing works. Same behavior. Kies says "connecting", but never connects.
I finally got my problem fixed. I had to take a 3rd computer, install Kies, reboot, plug in the Tab, wait for all the drivers to install except for the drive for the MTP device (this wouldn't install). Then I had to have it re-install the drivers, unplug the Tab and reboot it, then plug it in again. The thing finally connected and I was able to sync. Then it displayed a message that the firmware cannot be updated. Not sure if that means cannot be updated at the moment or if that means cannot be updated ever. Seems like a ton of work for nothing.
Update: just noticed that after the mentioned update, all the APN entries were gone. Had to set them up again by hand. No big issue, but annoying. I hadn't noticed until this morning, because I was on Wifi all weekend
I just got my AT&T Galaxy Tab and when I try to connect to Kies I get the message "This device is not supported by Kies 2.0." I checked for updates but it says it is the latest version. Anyone have any ideas?
I know this isn't helpful but KIES is very Flaky. I've never managed to get it working 100%. "Ask for connection type' almost always doesn't work. It's not worth the trouble as it's a completely USELESS app anyway.
For those who don't want to download the ADB drivers separately it's good for that then once the drivers are installed just uninstall and move on
ipit said:
I know this isn't helpful but KIES is very Flaky. I've never managed to get it working 100%. "Ask for connection type' almost always doesn't work. It's not worth the trouble as it's a completely USELESS app anyway.
For those who don't want to download the ADB drivers separately it's good for that then once the drivers are installed just uninstall and move on
Click to expand...
Click to collapse
But how can you install the Gingerbread update without Kies?
ufd108 said:
But how can you install the Gingerbread update without Kies?
Click to expand...
Click to collapse
I don't bother with Samsung provided updates. Just get my ROMS from right here and use ODIN Thanks to the wonderful devs (Ocome) on this site.
PS: Even if you want a stock GB ROM you can get it from here. No need for Kies.
http://forum.xda-developers.com/showthread.php?t=1074759
Me Too
Hi
Just a 'me too' post i'm afraid. I get the GT saying 'connected' in the MTP app, while Kies says 'Connecting....' forever more. Its REALLY anoying.
I am not interested in any non official roms (wasted far too much time on them on my various WinMo phones). I do want to be able to install an official Gingerbread update though.
My tab used to connect to Kies. It stopped connecting right after it installed an update (to FROYO.XYJJ3), and I have never managed to get it to connect since. I think Kies has a bug (one of many!) which means it will not recognise the current rom on my Tab.
I have tried:
- Removing SD card
- USB debug on/off
- USB connection set to Kies/Choose on Connect
- Reset tab to factory default
- Connect tab then start kies
- Start kies then connect tab
- BT On/OFF
- Wifi On/OFF
- Sim card out
- flight mode enabled
- packet data on/off
- Install kies onto 2 other completely fresh PC's Win7X64 and XP
Nothing has worked, says 'Connecting' but never connects. I'm about ready to just ebay the pile of junk and move on!
Kies version: 2.0.0.11014_49
Tab Build No: FROYO.XWJJ3
Kernel 2.6.32.9
Baseband: P1000XXJID
Tab version 3G+Wifi
Firmware Version: 2.2
Model No: GT-P1000
Been onto Samsung tech, but they are ruddy useless - no help what-so-ever (not that I expected then to be). How Samsung ever expects to compete with apple when their software is even worse than ruddy iTunes I just dont know.
Nigel
you have to switch to kies mode in the wireless/usb settings. Then before you connect the tab to usb make sure you on your home screen, else Kies mode will never start up. You can start up kies on the pc before or after you connect the tab doesnt matter. If the kies software never starts up at this point, uninstall, make sure the drivers have been uninstalled as well, reboot, reinstall kies. Start kies before you connect the tab as it may have to install updates, then connect the tab in kies mode. Ive used kies mini and regular kies with this method, works. As a side note, the full version of kies will not work with Stock US roms, it will always say phone not supported, so you have to use Kies mini.
Although I don't think i would rely on Kies to do a firmware update....if at all or successfully.
Ok guys I'm a noob around here. I've had my P990 for about 7 months and I'm ready to throw it against the wall:crying: I've been searching for info on this type of fault and I read that it happens pretty often. I really didn't have the need to plug my phone to my computer, so I never did, until about two days ago I decided I was bored with my stock phone and decided to install the latest version of android, so I downloaded the LG IV suite. Installed it, I'm following the directions, connect my phone and bam, NOTHING I kept getting an error on the LG suite, can't find phone, check connection and try again. At this time I also notices that my phone was charging through the USB cable. So my basic troubleshooting techniques kicked in, and performed the basic steps:
-Made sure Mass storage only box is checked
-Switched USB cable
-Re-installed the driver
-Downloaded the latest driver from LG website
-Downloaded drivers recommended by XDA
-Tried two other computers with two different OS
So none of this worked:crying:
After monkeying around for a couple of hours with my phone, I read somewhere on this forum to take out the battery, connect to USB cable to your computer, hold down the power and volume down buttons at the same time, this would put my phone in some mode, I don't know what that mode is, but decided to do it. My phone powers up, then I see the green android little man with a white box and an arrow coming out of the box. Ok, finish doing it's thing and then it reboots. I go into my phone and find that everything has been erased and the phone was back to it's original state when I received it over the mail.
Since my phone is back to stock, I decided to go the root road. Downloaded SuperOneClick, installed it connect my phone via USB and I'm back to step one. I get nothing!!! So then I decide to go the root flash road. So I downloaded the z4root adk file and put in the flash, pop the flash in my phone and nothing. Can't see my flash card on my phone (never used an SD card on my phone and decided to buy one for this instance). Kept reading on-line and found that I need a file manager application, so I installed Linda Manager on phone, opened the z4root adk file and installed on my phone. So now I'm getting very excited and I'm giggling like a school girl because I'm starting to see light at the end of the tunnel. So I run the z4root application and go with permanent selection, the application start the root, then BAMMMMMMM. The application just stops and my phone takes me to my home page. I decide to restart the z4root application and I can't get the app to run. I re-booted my phone, restarted the app, and keep getting stuck. The app stops and I can't never successfully get a root. I'm out of ideas, I've going at it with my phone for two day and reading on the net.
The two thing I want to accomplish is to be able to use my phone via the USB cable and to root my phone. Can you guys point me in the right direction. At this point I'm willing to try anything on my phone since everything got erased.
by the way here's is what stock I'm running on my phone:
Android version: 2.2.2
Baseband version: 1035.21_20110725
Kernel version: 2.6.32.9
Built number: FRG83G
LGE version: LGP990-V10d
My computer is running Windows Vista, I also tried a Window 7 and a Windows XP computer and still nothing for the USB.
I would appreciate any help guys, throw me a bone over here:laugh:
Same thing happened to my friend. No USB detection (the phone was charging through usb but nothing showed up on the pc). He tried everything then he called me (I have o2x too) , i tried everything you did too. His pc detected my o2x , but when he connected his (on the same cable) ... nothing .
Finally he remembered the phone had warranty and took it to tech suppport. First they reflashed it , but when he tried it home ... nothing . He took it to support again , they kept it for about 10 days and told him they had to change the motherboard.
Phone works now.
He was on stock froyo too , Vodafone Romania version.
Sent from my Optimus 2X using Tapatalk
On another threat I found more similar problems.
kohos said:
Sorry for the bump, but I got some update.
when dialing the above mentioned 1809#*990# in the Port menu, switching from default AP USB to AP/CP UART gave me life signs.
After switching to AP UART I linked the Unknown device driver to lgusbdiag.inf located in C:/ProgramFiles(x86)/LG United Mobile Driver.
Suddenly it started installing it and is now recognized as: LGE Platform Android USB Device.
Once disconnected I lose USB again, I'm able to recreate the first steps though even in default AP USB mode by now.
The only thing I need USB for is for flashing a custom recovery but the only thing I don't have is ADB somehow : / Clockwork telling me: device not found.
Any help on this one?
Click to expand...
Click to collapse
I tried this, but unfortunately it didn't work, I can't even see my device under Manage/Device Manager.
brymarti said:
i tried that but it only charge
theres a weird thing in my cp when i switch to cp uart my o2x says it charging even i dont connect it to my pc or charge it
Click to expand...
Click to collapse
I get the exact same symptom, as soon as I change from AP USB to AP/CP UART, my battery icon on my phone goes to charging, without the being plugged in
Well I'm pretty tired of monkeying around with this phone, but I really like phone and really don't want to change model. So I decided to order a brand new one:laugh:
I should be getting it within the next two week, hopefully that doesn't give me the same problem
I'll keep you guys updated.
Help??
A very good friend of us noobs toying with our O2x's are Paul O'Brien.
I could not get any other flashing tool to root my O2X other than his. Here is link to his guide:
modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/#entry1645587
He also has the tool to completely restore your O2X back to factory standards, and in the O2X forum here you will find all the different stock roms, you need to get your phone back to these factory standards and restore your warranty.
After you flashed your phone and get ready to try all the marvellous ROMs, waiting on the other side, I can only recommend to purchase the PRO version of Clock Work Mod, it really brings out the fun in rooting your phone.
Seeing your description of your troubles, I think you have softwareproblems, more than hardware problems, so a complete flash and maybe restore, will likely solve many if not all of your problems.
Best regards
Mike
And dont forget to show your support to the developers, they do a marvellous job for us!!!
Thanks mike,
I followed the link you provided and did a lot of reading. So decided to try that method. No luck with that, my computer doesn't detect APX mode while holding down both volume keys. I tried it like 10 times every time holding the keys at different intervals. I even tried it on my wife's laptop running windows 7, didn't work either.
I did find a lot of good info on the link you posted.
Thanks, just waiting on my new O2x to come in the mail.
Possible solution
Some days ago, I also had a problem connecting my LG Optimus 2X to my PC (Windows 7).
I solved my problem using this instructions I found in the G2X forum, by conspirator_boff user (http://forum.xda-developers.com/showpost.php?p=15899923&postcount=10)
Similar issue. This worked for me on Win 7.
Uninstall the LG Drivers and reinstall the G2x 2.2 package from LG.COM /us/support/mc-support/mobile-phone-support.jsp (I can't post links)
Plug the phone in and go to Device Manager. There should be a USB Composite Device that is not properly installed. Right click it and select Update Driver Software.
Select 'Browse my computer', then 'Let me pick'. Choose have disk, and browse to where the LG Drivers are installed. Likely C:\Program Files\LG Electronics\LG United Mobile Driver\ and select lgbus9x.inf.
Then pick LGE Android Platform Composite USB Device from the list of drivers. Should be the top option. Hit next.
I let it sit for a minute while the drivers installed. Some things registered in device manager right away, the LGE USB Modem for one. But, the drives didn't. Unplugged the phone, plugged it back in, and the drives popped up under Portable Devices.
Click to expand...
Click to collapse
I think it's an issue from the newest LG Drivers because when I first tried to connect it a year ago I had no problems.
Hope it helps.
hurtads said:
Thanks mike,
I followed the link you provided and did a lot of reading. So decided to try that method. No luck with that, my computer doesn't detect APX mode while holding down both volume keys. I tried it like 10 times every time holding the keys at different intervals. I even tried it on my wife's laptop running windows 7, didn't work either.
I did find a lot of good info on the link you posted.
Thanks, just waiting on my new O2x to come in the mail.
Click to expand...
Click to collapse
Good luck and I hope your new phone will behave properly.
Remember Paul also has tools for bringing your phone back to factory standards, so you keep your warranty.:good:
Enough said, good luck and remember our O2X is probably one of the easiest phones to try out different ROMs at and I have never enjoyed this little gadget as much as after I flashed it!!:
BR
Mike
Fixed
Sorry guys for the late update.
I received my new P990 about two weeks ago. As soon I pluged the phone into my computer it started installing the drivers and I was able to use my phone via the USB cable. Another thing I noticed, on this new phone when I pluged the USB cable, I noticed it went in nice and firm, on my old phone the cable seemed to be a little loose. Anyway it was definately a hardware issue with my phone. I'm pretty happy with 2x.