Hello all...This may be my first post but i have beed watching the forum for quite a long time!You are doing a great work around here!
I need a big favor from anyone that can help!Does anyone have the original SPV m1500 rom provided by orange and can upload it somewhere for me to download?Or can anyone back up his ROM from a m1500 and upload it somewhere?
And i have question as well and i would be grateful if you could answer this one!
If you haven't CID unlocked your phone and somehow managed to upgrade the ROM with a different make's one (i have one from Qtek 2020i at the moment) will it be blocked by the network or is a matter that the person that i bought it from (over ebay) reported it as lost/stolen?Currently everything works fine apart from the phone bit!It says no service and can't detect any network!(it just says ''unable to read setting from the network.Try viewing settings later or disconnect data connection and try again'').
Any help would be greatly appreciated
sorry double post!server had problems!can a moderator please delete one of them/?
Any help pls!??
Hi,
SPV M1500 same as O2 Xda IIi / Dopod 699 / i-Mate PDA2 / Qtek 2020i and known as HTC Alpine. You can upgrade using any ROM that build for HTC Alpine.
Please check at here about all in one sim unlock tool by itsme
http://forum.xda-developers.com/showthread.php?t=240784
Thanks
Thanx clustered for the reply!
I have already used that thread to upgrade my firmware but i am just asking if i anyone has the original SPV m1500 orange rom available?
The thing is i have done the upgrade without CID unlocking the phone!Everything went ok but the only problem is that now the phone in the signal bar has an exclamation mark and says no service!So i was just wondering if it is the upgrade that ''blocked'' the phone bit of the M1500 or is it something else!
Thanks again
after a lot of search i found in a forum someone stating that :
''RIM check the ROM version and RADIO version before they allow you to connect to the relay. If it's not an approved mix, your device IMEI will be BARRED from the relay.''
is that possible and do you think that's why my phone gives the no service message?
Could anyone suggest any solutions to this?
anyone can help??
HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???
HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???
I've done some research and can't find much on this topic -
I'm trying to run a program called Smurf - it requires that I have SQL CE installed on the device. I've tried 2 different ROM's (Alex's & Mobile Vista) Everytime I run the program it gives me a error about not being able to find sqlceme30.dll. The developer told me I needed to install SQL CE and gave me the MS link. I downloaded the program - however, under devices it gives you a ton of different cabs to install. My question is, which one do I install? I use an AT&T Tilt w/ Alex's ROM WM6. Any help would be greatly appriciated....
Thanks.
Dont mean to unbury this but I am having the same exact problem with smurf.
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
what do you call the bar of alphabet on the right side which appears when your scroll thorugh a big list.....???
сan any one point out the links to cabs to install it???
any recommendation for the cleanest rom for HTC TYTN II ??
ps: recently after flashing to new rom....notice that it's not included.....
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
how to render a card reader????
McHale said:
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
Click to expand...
Click to collapse
thanks for the fast reply!!
i'm using hyperdragon lite rom now....
how ever somehow softick card export is not working....
my pc kept on installing the driver for it for the first connection....
after some time kaiser hang......
and on second connection the pc show that it is connected.....but i can't explore the sd card cos there's no link from my computer .....
normally i would search for autorun.....but after rom update to hyperdragon it stopped working.....
still trying the search to look for fix...........
anyone??????
ps : w5storage not working tooo....
only hope at the moment....pocket controller through the file browser option???
this is really a pain!!! cos i don't have a card reader......
active sync could do some transfer but it's slow and limitation with the file size.......
edit: some one pointed out that in order to use card export, a usb2pc.exe file need to be in the /windows folder.....
anyone can kindly verify this????
or please kindaly upload a copy of that file so that i can try it my self......
(no rapidshare or megaupload servers.....they don't work for me)
Hello,
i am having trouble with getting work VOIP on my Kaiser.
I downloaded cabs from http://forum.xda-developers.com/showthread.php?t=415262&highlight=voip
Now in Settings > Phone is new tab Internet..
but when i run Sip Config Tool V2.0.1, fill in all fields, click on Save Configuration
application crashes due to error "Invalid argument passed to DMProcessConfigXML"
So i tried to create _setup.xml and cab to set it up this way, but when I try to install this cab i get "Installation of voip.cab was unsuccessful"
Is there any problems with generic HTC rom and VOIP?
thanks for any advice
Hello,
I got exactly the same problem ... Have you found a solution ?
Thanks,
Guillaume
I also can't solve it and simple download PortSIP.
Several month I can't any problem with VoIP on my Kaiser.
It a free tool. No registration.