Related
I have an un-locked TyTn II that has an annoying screen problem. At least once a day, the touch screen will stop working. The device continues to function normally using buttons and/or the keyboard, but the touch screen function is dead.
In every case, I have been able to revive the touch screen by using buttons to navigate to the screen alignment settings and then use my finger to scroll around the screen till it comes back to life. Once the screen alignment program comes back to life, I align the screen and go about my business.
I have a fair amount of Spb software installed, but I had the same problem before installing any of the Spb software, so on the surface, I'm ruling that stuff out.
I have Kaiser Tweak and Paul's Tweak installed.
Any idea's would be greatly appreaciated.
Maybe this thread will help?
http://forum.xda-developers.com/showthread.php?t=337979
Thanks for your reply.
The thread you provided appears to be focused about "complete" freezing. My device continues to work as long as I use buttons and/or the keyboard. Once I align the screen, the device goes back to normal operation.
I've been using my HTC Diamond for about 2 weeks now.
Bought it from www.plemix.com and it came unlocked , and I had no trouble at all using it and installing the HardSPL's / updating ROM (Dutty's Diamond v1.6) .
Today I ran the TomTom Navigator 7, and after a while it started to make continuous sound - the default sound when a button is pressed or touchscreen is tapped- , so I did soft reset a few times, didn't solve it, touchscreen was kinda jammed, and I took out the battery. A minute after I put it back, and it worked fine, I took some photos right after, and everything was working fine.
Then two hours later, I took out my phone from pocket to check the time, I see it's halted on the photo screen, and no response at all. So I just turned the phone off by taking out the battery, and just left it off until I came home.
Now the touchscreen is not responding to any taps or clicks, except that it seems that it still detects any sort of tap/click, because the backlight comes on from dim state when I try to tap it.
So it definitely means the touchscreen is not completely dead, but it's just not functional most part.
Hardware buttons works fine, but I'm stuck at the initial "Tap your screen to begin configuring your Windows Mobile" after hard reset. I even updated the ROM to Dutty's Diamond v1.8 just now.
Since I can't do anything and just leave it idle, it goes to [ Align Screen ] page, and still I can't press any cross, since the touchscreen is completely not responding.
Anyone had this screen death problem? Any method of solving it?
---Updated---
Just now the touchscreen worked for 30 seconds, i could actually align the screen, then it showed me the Date/Time setting page, where I could scroll the cities , but then it stopped working again. So i'm still at Date/Screen page...
--Updated--
The touchscreen works for 2 minutes after I do a soft reset / power on&off, or I should say, it works until you press some hardware key on the bottom (volume up/down buttons doesnt affect this).
After I press any of those buttons at the bottom, the touchscreen stops working.
Also, after I turn on the device, enters WM, and runs TouchFLO3D, for the entire time touchscreen works, it's constantly pressing the tasklist dropdown (upper right corner of the screen), making it constantly pop down the task list.
have you tried a hard reset?
Yes, like 3 times. Wiped everything, OS, ROM, NANDFlash.
Also updated the ROM from 1.6 to Dutty's 1.8 ROM. Everythingn works fine except for the Touchscreen.
Right now, when I turn on, the touch screen seems to be pressing all the time at the task manager part of the screen (where the [X] is), its popping up all the time the task list, then after a while, like say, 2 minutes, touchscreen again ceases to work.
Not really promising, but you could try to remove the screen-protector. Perhaps this releases any tension onto the screen.
Thanks. I've thought of that, maybe I'll try later on.
For now i'm suspecting that maybe water went in through, so I've put the phone upside down to maybe take out the water using gravity for 2 days.
It seems like it's working better now, with longer hours of normal functioning..
I'll wait and see one more night... if water is the cause of the problem, it should dry up in say 3-4 days.
It may sound strange, but pit it face down on the carpet and rub it around for a while. Its how I fixed mine. Don't ask me why it works but I had the same thing happen. I think somehow the electrical charge got dissipated from the screen and the static from the carpet recharged it.
Actually your words makes a lot of sense
My Diamond was acting completely alright today, used GPS for 2 hours and called a few people along with many weather updates.
Seems to be working fine now...
But I think what you said is pretty reasonable, since when I rubbed my dead screen , after a few rubs it started to work (2 days ago).
Thanks
yeah this had happened to me about a week ago exactly the same thing I had hardspl mine and updated radio to .05 and then a few days after I had the identical problem. However I took a shortcut and sent the phone back in and requested a replacement claiming it was defective they agreeded and sent a new one however this one already has .05 radio on it so I didn't have to hardspl it. I can't say any of these things would have worked form me as I did not try them byt symptoms are identical. my .02
I just replaced a screen in a Trinity (Dopod D810). The touchscreen initially wasn't calibrated correctly so I ran the alignment tool in the settings, and after a few attempts, I calibrated it properly and the touchscreen was working perfectly. Now the touchscreen is not working properly. The top half of the screen responds to touch, but no matter where I press in that region, the screen thinks I'm pressing the top-right corner. When I run the alignment again, it responds to all the touchpoints but it never successfully calibrates and it keeps bringing me back to the alignment screen.
The current settings in the registry entry for touch calibration are as follows:
484,558 244,286 263,815 750,820 707,295
I've found a few other threads here (the most helpful being http://forum.xda-developers.com/showthread.php?t=355010) and I've tried the settings from that thread. The screen seems more responsive, but still not correct because the bottom half hardly responds and the top half seems to respond when it feels like it.
Can someone please post their D810 touchscreen settings so I can try it? I've tried the settings from my Touch Cruise, but the screen is still doing weird things.
This is a customer's phone so I need to have this fixed ASAP.
I'm thinking that it may be a faulty digitizer, but that won't explain why it worked perfectly when I first calibrated it.
UPDATE: NOT FIXED yet, but now the backlight is dead. I just turned it off, and then turned it on again, but I can only see the screen content if I shine a torch onto the screen. The LCD hasn't leaked. The backlight just died and the connectors in the phone are fine. Perhaps this was a dodgy screen.
Any ideas?!
since the device has a recessed screen, take the cover off to get at it.
take a soft cloth or something and clean off all the garbage on the digitizer and back of the plastic. make sure everything around the lcd is free of dirt.
usually, if there is something pushing down on the digitizer while you calibrate it, it will totally bork the alignment over the course of 10 minutes to an hour.
my kaiser is currently having this issue, though i put it though alot more hell then i should have... so i suspect its suffering from other issues.
XDA-Dev:
I hope this finds you in high spirits and good health. Just a day ago my phone started acting peculiar regarding the lighting of the touchscreen.
Firmware: 1.6 // Build: DRC83 // Rooted: No
Damage: Slightly scratched hard plastic from dropping 2-3 times. Otherwise, outwardly pristine
Upon purchasing the phone, I immediately noticed that the screen would creak if it was pressed on the bottom right hand side (by the send button). The right side of the screen also protrudes slightly higher than the left when in the open position. I have owned the device for about 7-8 months now and have noticed that on the rear, when in open position, there is a scratch where the sliding mechanism moves. The paint is stripped and the underlying metal is displayed in those areas. And now on to the issue at hand:
When the phone is closed (touchscreen only):
- When pressing MENU, or any key that would normally illuminate the screen, this does not happen. The screen stays dim, yet the lights on the buttons bellow it brighten.
- If I slide out the keyboard while the screen is supposed to be on (meaning the buttons are lit up), nothing happens.
When the phone is open (keyboard presented):
- And the screen is off, if I press MENU, the screen comes right up with no brightness issues.
- At this point, if I close the keyboard, the backlight disables itself. The screen is NOT completely blank. If I reflect the light of the room off of it, I can just barely make out that it is indeed displaying whatever task it was that was open, but if I were in a dark room, there would be no chance of recognising what is being presented.
- Continuing from above, once the screen's backlight is disabled and I reopen the keyboard, it does not turn back on. I must turn off the screen and turn it back on for the backlight to resume normal functioning.
One would think that if the issue lies in a loose wire that once the keyboard is extended that the backlight would regain normal functioning. Because this is not happening and that it is only working under certain circumstances, I cannot accurately ascertain whether this is a software or hardware problem.
Attempted remedies:
- Soft reset (both rebooting the phone by powering off and on and by going into the reset menu)
- Hard reset (by going into the reset menu and hitting ALT+W, etc)
Neither of these attempts succeeded in restoring functionality of the backlight. I've also search high and low through the settings, but see nothing other than 'Brightness' under 'Sound & Display.'
It may be noteworthy that I have the paid application 'Power Manager' installed. Though, perhaps not since this issue was still occurring AFTER the factory reset when no foreign applications were installed.
If you require any additional details, feel free to give a reply with any questions. I'm sincerely hoping I don't have to deal with T-Mobile or HTC to have this repaired. Any tips, ideas or possible solutions would be greatly appreciated!
Regards,
Ian
Update on issue:
On the way home from work, as the battery was on it's last leg (less than 10%), I turned off the screen while the device was in the open position after finishing a text. Upon attempting to re-activate the screen, it would not do so. As always, the side buttons lit up, but the screen was blank no matter what I did. I could hear the vibration from receiving texts and the red 'omg I\'m dying LED' was still flashing, so the device had not died.
Returning home, I gave it a reboot by removing and replacing the battery. I've kept it in the open position since it has been plugged in and am quite afraid of manipulating the slide mechanism any further.
I'll be calling t-mobile to get their opinion on any further troubleshooting momentarily and report back.
Sorry for opening an older thread. do you remember what t-mobile said was the problem? i am having the same issue.
simplewhite said:
Sorry for opening an older thread. do you remember what t-mobile said was the problem? i am having the same issue.
Click to expand...
Click to collapse
The ribbon wire in the slide mechanism is either broken or pulled out of socket.
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
I would say it's a warranty job, just tried turning my brightness to zero and you can still see the screen.
I did have a similar problem on an old note that had root and custom rom though but I had somehow set the volume rocker to control brightness and it had lowered itself to minimum in my pocket
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
Try pressing and holding Volume down and power button for 5 to 7 seconds to force power off, then try to boot to download mode Volume Down + Bixby + Power button and see if the download mode screen shows......if not then probably a bad screen.
Sent from my God Mode 8
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
KEVIN88GT said:
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
Click to expand...
Click to collapse
Yeah that sucks, i can imagine..... i too hate the idea of refurbished units being swapped for warranty....bs, should be brand new unit!
Sent from my God Mode 8
so I had it replaced under warranty through T mobile. Refurb phone will come in today. One quesion. Should I let the Tmobile techs do the data/settings transfer from old phone to new one or just do everything myself from scratch (which will obviously take longer).
This happened to my phone twice for the past month or so. (both in Nougat and Oreo - Non rooted) Black screen but phone seems to be responding -- I can receive calls and notifications etc -- And force reboot doesn't fix it. I've also tried drainging the phone when it first happened to me but doesn't work. HOWEVER, it gets okay so randomly. Like I just left it for couple of hours and it just worked when I hit the power button.
I did tried bringing the device to Samsung but what they did is to just manually upgrade/reset the software in their end which I could have done in my part but I just let them do it. They told me to come back if it happens again which is kinda BS.
I can conveniently say this is a Hardware issue. I will wait for it to happen again on my phone and request for a replacement. Phone is 4 months old when it first happened.
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Reprocrastinator said:
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Click to expand...
Click to collapse
If you're under warranty it will likely be a free repair, unless they find other damage. Like moisture damage.
As far as fixing it yourself, it's just about as cheap to have Samsung do it than it is to buy the parts yourself. It's $229 for Samsung to do it, and you'll maintain the water resistance rating.
same has happened to me
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
This has just happened to my note 8 too. I was about to update it and had started it. set my phone down and picked it up and phone screen is black but can hear the haptic feedback.
I can only see the lock screen and the notifications. Everytime I try to unlock my phone I only get to see a glimpse of the notescreen and then the screen turns black. Even when I try to go to camera through the lock screen the screen goes black too. When I charge my phone it heats up so I haven't really charged it as well. Has this also happened to anyone? It seems as if the phone's sensitivity still works in all places but when I unlock it the screen just goes black.
I also have problem of freezings and always rebooting. Tried soft and hard resets/factory reset. Still same problem. This phone has hardware issue. Do not buy.
I realize this thread is quite old but I have this exact same issue now. I have managed to discover some other information by playing around with various settings which are noted below. To begin with, I was able to used the AOD hack posted above for a while but it no longer works. The only way I can get my screen to come back is with a soft reset - but as soon as the screen times out or i turn it off, it goes black, with or without AOD enable. All the on screen buttons still work as well as the haptic feedback - I just can't see anything.
Now on to what I have found:
One thing I have found is if I turn off adaptive screen brightness and crank the brightness slider to the right, when it goes black I can faintly see some of the buttons - enough that I can turn the phone off or restart it from the power menu (If I switch the default setting to night that also helps to see the buttons a bit better). Also, if I enable night mode I can also see the brightness slider faintly but when I slide it left, it just makes the screen completely black and when I slide it right, it only returns it to the very faint brightness level.
So at this point I am stuck. To summarize the issue:
1. When the screen either times out or turns off, it is still "alive" but goes black. It will not return to normal brightness.
2. Turning off adaptive brightness and cranking brightness slider to right allows you to see faint buttons after screen times out but won't return to normal brightness.
3. Enabling night mode helps to see the faint buttons, in particular the brightness slider a bit better. However the screen still cannot return to normal brightness.
4. The only way to get the screen back to full brightness (albeit temporarily until the next timeout) is to turn off the phone or reset from the power menu; or soft reset holding volume down + power simultaneously.
Hopefully someone else has figured out a way to recover this. I am on Android 9 with Samsung UI 1.0
Phone is completely stock, never rooted and completely out of warranty.