[Q] Update stop at 15% - Touch Diamond CDMA

Hi all,
I have HSPL 1.24 Installed
I used Task29-diamond to format the memory
Now, when i try to upload a new ROM, (GEN YR2) the update stop at 15% and i have a connection error message.
When i update with a light rom (like a Radio rom), the update is a success.
Do you have any idea of how to solve the problem?
Please, help, my wife will kill me!...

Any idea please? You don't know my wife...

indyana_fr said:
Hi all,
I have HSPL 1.24 Installed
I used Task29-diamond to format the memory
Now, when i try to upload a new ROM, (GEN YR2) the update stop at 15% and i have a connection error message.
When i update with a light rom (like a Radio rom), the update is a success.
Do you have any idea of how to solve the problem?
Please, help, my wife will kill me!...
Click to expand...
Click to collapse
Try to use original USB wire and this is heppens when you try to update your rom from "FRONT USB PORT" of you PC, just try to connect your USB wire to back of you PC...

Related

HELP! Can't Load Rom - Don't Want A Brick!

Guys,
I just tried to upgrade to a new ROM on my Cingular 8125. I have upgraded from the original rom to a Mr. Clean AKU 2.3 Rom a while back. This time I tried to load Ell's AKU 3.2 Rom.
Anyway, my computer locked and restarted during the flashing process (99%)
My phone turns on and shows the colored bar screen (is this called the bootloader?). This is all it does. I'm not sure how to try and fix this. I'd like to try and reflash a rom; however, if I try to do that I get Error 260. This error says it can't find the phone which is easy to understand since Activesync can't connect since the phone won't boot.
HELP!
SuperDodge said:
Guys,
I just tried to upgrade to a new ROM on my Cingular 8125. I have upgraded from the original rom to a Mr. Clean AKU 2.3 Rom a while back. This time I tried to load Ell's AKU 3.2 Rom.
Anyway, my computer locked and restarted during the flashing process (99%)
My phone turns on and shows the colored bar screen (is this called the bootloader?). This is all it does. I'm not sure how to try and fix this. I'd like to try and reflash a rom; however, if I try to do that I get Error 260. This error says it can't find the phone which is easy to understand since Activesync can't connect since the phone won't boot.
HELP!
Click to expand...
Click to collapse
i had this very proglem... TURN OFF THE PHONE ASAP.. as the bootloader screen will drain your battery very quickly.... reset computer and phone... plus in the USB cord.. and in the booth loader screen in the lower left corner.. you should see USB!!! just flash workin room.. and you should be set to go.. i believe>.
When I plug the phone in it does show USB in the lower left corner; however, The rom update utility can't see the phone.
Am I doing something wrong or should I be trying to install the rom in another manner?
SuperDodge said:
When I plug the phone in it does show USB in the lower left corner; however, The rom update utility can't see the phone.
Am I doing something wrong or should I be trying to install the rom in another manner?
Click to expand...
Click to collapse
hmmm i dont know... try restarting both devices.. other then that i cant hlep ya.. im still new to this...
USB means it is connected.
Again, keep the battery out when you aren't doing the flash. Reboot the PC in case the link is down.
Try flashing a stable ROM, like the Mr. Clean one you used before. Activesync doesn't need to operate, the ROM will see the wizard if the wizard says USB.
Zonealarm actually interferes with my ROM flashes, although it prompts me to see if it is ok; you might turn off your firewall prior to doing the ROM flash. If you do so, disconnect from the web.
I have also the same problem with my XDA 2 mini or the other called this the HTC Magician. I try to UPgrade my Radio 1.03 to 1.12. and when im applying the upgrade procedure the Upgrading stops and error. What happen now is my XDA 2 mini or HTC magician doesnt open now. only the word "SERIAL" and when i plug the USB, the word "USB" show on the screen................... Is there some one can help me pleasssse with my problem....

Help! Sony X1i Rom update problem

I try to update SPL and ROM. It alwasy stop at 0%. I cannot upgrade it. Anyone can help!!!
I also try to use microSD to update. It keeps "Loading"
Thanks
Hard spl the device....
Regards,
WC
I try it. It cannot update also. It stopped at 0%
How are you trying to do the hardspl? Do not use it via memory card. What operating system are you using? There is problems with vista and using these programs.
Regards,
WC
stephenyu said:
I try it. It cannot update also. It stopped at 0%
Click to expand...
Click to collapse
I tries all method to update the rom. I used WinXP.
The phone must be on in regular mode and connected and sync'd in order to hard spl.
Regards,
WC
I can sync with active sync

Daimond display flickering and can not Sync with a PC

Hi,
I have a big problem with my HTC/XDA Daimond.
I bought it in ebay so I dont know what the person did all with it, but Im trying my best to get it clear again.
What I can say only is that he flashed a new HTC ROM 2.00.421.1 WWE on it.
The Problems:
The display is flickering all the time if I switch the device on.
For this problem I read, that may the problem is the spl/hardspl and I have to flash the spl.
But now the second problem
I cant get a Sync with my PCs. Maybe its because of the new Rom, I don't know.
My Question:
Can I Flash the SPL over the 4GB Storage in the daimond (over WIFI I can copy the files on it)?
Can I Flash after that the Original Rom from O2 or HTC from the Daimond?
Or Other ideas to solve the problem?
With thanks in advance.
Yanuin
Can no body help me???
Do you get the USB connection pop-up when you connect the usb cable?
If you do then try using disk drive option so you can flash ROM that way.
You can flash from internal storage. See stickies in Rom section.
Flash a different hardSPL and then you're good to go for a different ROM. You can also flash the normal stock rom of your choice.
BTW: In rare occasions a firewall can prevent a correct activesync connection.
hey i have the EXACT same problem. my screen start flickering randomly one day and never stopped ever since & USB connection is totally gone. I've been trying to change the HardSPL version but I don't know how to do it without USB connection. I was successful in changing ROM using the internal storage method. Is there something similar to flash the HardSPL?
Someone help me please
Thanks

P3600 dead? PLEASE HELP!!!

hi guys... i was updating my rom as usual, but during update "image file corrupted" error occured and my p3600 has died. i tried some suggestions from the forum, i tried camera+power+soft reset combination and after that updating the rom again but i stops at 1%. So i tried mtty.exe but it says "cannot open USB port". PLEASE PLEASE HELP ME ... (i use Windows XP SP3)
please guys... there're 220.000 active members here. i'm sure somebody knows the solution for my problem...
try using official rom from HTC website
go to the bootloder screen and then try using official rom from HTC website
best
nat
I have never been able to load images via the USB connection. I just take a memory card, copy the rom image to the root and change the name to RUU_signed.nbh hardboot and it loads. And I keep a original HTC rom to fall back to.

[Q] HardSPL Problem!!!

Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????
did you take out your micro sd card out of your phone?
That was my problem...........
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE
tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.
UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!
Moved to X1 Q&A as not Rom Dev
it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?

Categories

Resources