Hello,
in Uk a brought a Galaxy-S (T-mobile) and unlocked it. Now I'm back in Italy and I put my old SIM card. The Phone works, except for 3g, edge or any mobile connectivity. I think there is two options:
- The phone is still locked.
- My sim is very old (from 1999), may be no more compatible with 3g.
How do I find out which is the case and how I solve that?
Thanks guys (girls too).
No network
Hi m8
Could you please check your imei number, I did exactly the same.
I bought my sgs on firmware 2.1 & unlocked it via free unlock tool, I then messed with some new firmwares. Recently tried to sell my phone as unlocked but when buyer put their sim in, It shows a signal but no data network connection.
After messing around with different sims i did a check & noticed my firmware is some stupid 04999????
Regards
Mark
What does that mean?? Is it related to IMEI somehow?? What should I check about it? How do I fix that? I've 2.2 by the way
Related
My i9000m on the Bell mobility network is not picking up data after an overnight charge with the phone turned on. Today - nothing. I do have phone use and I can access data on WiFi.
I am running stock ROM. I unlocked the phone using a Rogers SIM card, about a week ago, but went back to the Bell network immediately after with no problem. After unlocking I got the Kies to work and updated to UGJH2. Since then, the network access has been spotty but I've switching to WiFi then switching back and it's coming back. I purchased this phone with a different Bell SIM2 then put my old Bell SIM1 (from an Omnia2) in this device.
*#7465625# shows Personalizatiob Status
network lock [OFF]; Network sublock[OFF]; SP lock [OFF]; CP lock [OFF]
What I've tried
1) Switching to WiFi and back - no data
2) Putting SIM1 back into the Omnia 2 - O2 booted up and accessed the Bell network including data. CONCLUSION - The problem is not the SIM card.
3) Putting the SIM2 into the i9000m - no network access at all; not even phone. This SIM2 is working in the O2 and originally worked in the i9000m. Much to my surprise when I put SIM1 back in the SGS it still picks up the Bell network.
4) Squeezed the SIM holder blew out with compressed air in case it's just a physical problem with the SIM being held tight enough - SIM1 still not picking up data.
So it would seem that there is a problem with my SGS reading SIMs other than the one in use when whatever happened happened. Any suggestions on how to get other SIMs, even from the same network, to work? If I have to submit my phone to Bell I need to re-lock it. How do I do that?
Thanks for the help.
--- update---
relocked the phone using *7465625*638*# then 302610 and my unlock code. Power off / on still no data access. Now *#7465625# shows Personalizatiob Status - network lock [ON]; Network sublock[OFF]; SP lock [OFF]; CP lock [OFF]
first try this
http://forum.xda-developers.com/showthread.php?t=789039&highlight=*#0011#
does it show which band it is using for data?
you can also try this
http://forum.xda-developers.com/showpost.php?p=8124344&postcount=45
install the APN on off
then flip it on / off and back to on
see if that helps
Thanks for the response.
I did the #*0011* It's flipping between the 850 on 5 and 1900 on 2 The DL and UL numbers are slightly different. I did have to reconnect to the APN.
How would this affect installing *other* Bell SIMS? That's what worries me the most - that it wouldn't read another Bell SIM that works in another phone.
the only time i see this happen is if you swap the SIM card when the phone is ON
if you turn off the phone, change between SIM1 and SIM2, then turn it back on, you should not see that problem
I know because i was playing around with multiple SIMs when we were researching the Unlock methods for this phone
I take out the battery before I change the SIM. I have to for the Omnia 2 so I just got in the habit. This is sounding worse and worse
although I was rushing off to work so maybe I didn't - hope springs eternal.
----resolution ---
sometimes you just have to call Bell, wade thru the 1st level support and get to someone who knows what's up. Apparently my phone plan changed today (I didn't know it was post dated) and the data feature was not provisioned even though it's a plan that includes data. The guy invoked the feature and poof - data. yay. AllGamer, thanks for your help.
you'r welcome
I did have the same problem, using 2 numbers from 2 telcos, both sims work fine on my iphone but I9000 fail to recognize 1 of these 2, no matter how I tried, I actually did all crazy things like insert couple paper layers between the sim and the sim slot to create additional pressure on the sim contact circuit.
Suck thing about this is non-recognizable sim has data plan with it, which I want to use on I900, finally I asked the carrier to issue a new sim and all thing work fine. It's a new sim type anyway. You may want to try this if all other means doesn't work.
The fix is easy I use to have a moto milestone and when this happened a simple reboot fixed the data connection.
Sent from my GT-I9000M using XDA App
Hi. I've just received a Samsung Galaxy S GT-I9000. When I tried my O2 sim card in it it didn't work. How can I find out if my phone is locked to a particular network?
*#7465625# that will tell you if there is a network lock. if there is try this
http://forum.xda-developers.com/showthread.php?t=761045
Who did you buy the phone from and is it network branded is another clue .
jje
Tried that azzledazzle. It says
Network Lock - ON
Network Subset Lock - OFF
SP Lock - OFF
CP Lock - OFF
I've had a look through the settings etc and can't see any mention of a UK network.
JJegan - Got the phone from a (not very bright) workmate but he didn't know what network it was on as he said he never used it. No branding on phone that I can see.
Go to menu, settings, scroll down to about phone, scroll to bottom an give us the basenband version and build number. Then scroll to top and click status. See if it says in there the network name. (it may say no network if you have no sim installed)
Hi Tehpriest. I don't have a sim in the phone as I don't know which network it should be on.
firmware version 2.1-update1
Baseband version is - I9000ADJM1
Kernel Version - 2.6.29
Build number - eclair.adjm1
Just searched for I9000ADJM1 and am I right in saying it is locked to O2.
The O2 simcard I have already tried was an old one (possibly not even 3G)
If I send for a new O2 simcard, is it just a case of fitting it and phone will work?
I9000ADJM1 = O2 network.
What happened when you put your O2 sim in?
Hi everyone,
I bought a Samsung Galaxy S GT-I9000 (16gb) in Singapore and was using it fine on Singtel's network (signed a contract with them). Now I have moved back to Canada and brought my phone with me assuming that all would be ok to use it with the network here. However I'm having big problems with this one network I just signed up with (Virgin Mobile).
85% of the time I cannot connect to it: voice calls and SMSing won't work nor will the data work on it, the only thing it says is "Emergency calls only". Then at other times everything will seem to connect and work fine - I can make calls and use data.
Virgin Mobile will not support me much because they're thinking it's the phone's problem, if I use the phone they gave me (a lower-end model) it works fine.
Here are some details of my phone:
Firmware version
2 2
Baseband version
I9000DXJPA
Kernel version
2 6 32 9
root (at) SE-S604 #1
Build number
FROYO DXJPA
If I check out the status, it usually says this:
Network
Unknown (switches to VIRGIN when it does work)
Mobile network type
UMTS (switches between that and HSDPA and GPRS)
Service state
Out of service
Mobile network state
Disconnected (switches to connected when working, and even when it's not working sometimes)
I have Network mode set to auto mode (GSM/WCDMA). I've tried to switch it to GSM only but that didn't seem to change anything.
I'm wondering if there's some kind of configuration settings I still need to do with the phone? I'm also wondering if it is the network I'm with right now? Virgin Mobile isn't one of the bigger telcom companies here and I'm thinking that if I switch to one of the bigger telcoms, will it work better?
Something else to add - before I signed up with Virgin I was using my phone with a pre-paid service (called Chatr) for voice only and it was working fine.
I'm sure this phone can support the GSM frequencies here.. can't it?
I also still have the Singtel customizations on the phone. Will it help if I remove it?
Any help would be greatly appreciated!
Thanks a lot!
Ryan
You can always try flashing a different MODEM (Radio) .. And you might as well upgrade to a 2.2.1 firmware, if not GB.
hmm.. do you know where I can learn how to flash my phone to a different (and more appropriate!) modem? also where to find an update to the firmware?
ryac said:
hmm.. do you know where I can learn how to flash my phone to a different (and more appropriate!) modem? also where to find an update to the firmware?
Click to expand...
Click to collapse
Just search in these forums. It's all there. You can easily flash a new radio package using ODIN. Better yet, try one of the custom ROMs from the I9000 Android Development section.
Hello guys! I've been reading these forums for a long time, amazing what you guys do in here
Here is my problem: I live in México, and I traveled to USA for summer vacation, my mexican mobile phone carrier uses 850mhz (TELCEL) and when I went to USA it was using ATT's network.
So everything was working fine, but when I returned just before I was about to cross the border, it stoped working!
It has a message that says ''Emergency calls only'' where it's supposed to say ''TELCEL GSM'', so no internet, no calls, no messages.
I was using Froyo on my phone, and thought of doing a reset to restore factory settings on the phone, but it did not work :/
Then I updated my phone to Darky's Rom 10.2 (Gingerbread) and it's still not working!
When I go to Settings>Wireless and network>Mobile networks>Network operators I can see that my carrier is available to select, but when I try to, it gives me a ''Unable to connect. Try later'' msg.
It is really frustrating because I depend on my phone so much, mainly because I share my 3G connection to my laptop for school's work and stuff.
There's one weird thing though, I unlocked my phone, and placed a MOVISTAR(1900mhz) SIM card on it, AND IT WORKS!!!
But the thing is that I don't have internet on that SIM card(is prepaid and it's EDGE, not 3G), and on my TELCEL SIM card I have a contract to complete (still a year to go).
When I put my SIM card on someone else's phone, it works like a charm, but if I try to put a TELCEL (850mhz) SIM on my galaxy; just says ''Only emergency calls''
What do you guys think happened to my phone? I would really appreciate your help.
flash a new modem... one that contains more frequencies enabled.. any bell or telus will do.
UGKC1 modem should fix your problem.
It did not work, should I keep trying with other modems?
you can.. jk4 or jl2 are other modems with 850 and 1900 enabled... maybe your problem is different then I thought... but it sounds like your modem... maybe try unlocking your phone? if you can connect to wifi download sgs unlocker pro (paid app) in the market to unlock, your phone also needs to be rooted. are you using the i9000T? that may be different problem altogether...
edit: sorry I see you said it is unlocked... just doesn't sound like it...
a) modem related (ugkc1) should have fixed that
b) SIM carrier not compatible to phone (unlock phone to fix)
c) Busted SIM card, check in other phone
d) make sure phone option is set to Automatic CDMA/GSM
sounds like you checked everything I would check....
does your 3G work... make sure your VPN is setup to your carrier
maybe imei got blocked...? only way around that is to get provider/samsung to unblock
Hey have you solved this, I have the same problem
my solution
http://forum.xda-developers.com/showpost.php?p=25509654&postcount=279
Hi all,
I have two Xperia SPs both are (C5303), I got them from different carriers (Vodafone Australia and Virgin mobile/ Optus) on a plan which as finished now. I have encountered an issue that, one of the phones is unable to connect to the Optus network. I have tried an optus sim and there is no indication that the phone is locked. I would like to know is the baseband (8960A-AAAAATAZQ-40031007-20) affecting the phone's ability to connect to another network? I tried the other phone running 12.1.A1.207 with 8960A-AAAAATAZQ-40031007-21 which works with both networks. Would flashing to a new baseband fix the problem? I had read that flashing different baseband could work?
http://forum.xda-developers.com/xperia-sp/general/how-to-fix-network-baseband-missing-imei-t2865378