Database Develop

Help, Bricked and no solution is working

Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated

vstarrydr05 said:
Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated
Click to expand...
Click to collapse
Is download mode still available? If yes your not screwed but your drivers might be.
What steps do you use to get into download mode.... 3 buttons or usb/vol+- combo ?

Yes download mode is available. I used the holding the volume up and down and plugging in USB. It goes to download mode with no issues whatsoever.

Well then this is a non-issue issue... Possibly a bad flash... Go in download mode again and reflash.
Your a bit crying wolf with no reason here. As long as download mode works and Odin detects the phone you have no issue
Use the Odin-one click if you have to ...but really calling it a brick when you have download mode gee-wiz.

Thats the issue. It is not detecting in ODIN. If it was detected I would have reflashed with no problem. I get the message that the USB device has malfunctioned and is not recognized

Try re-downloading the USB drivers - use the ones found in my signature.
If you can get into recovery - you can then get back into CWM and attempt to re-flash again - but you'd still need to 1-click back to stock using ODIN.

Have you tried to plug the usb cable in the Mb directly or changing its port ?

I actually downloaded your drivers last night and installed them. Still not recognized. I can get to CWR and have the zip files for AXURA and Cognition on the SD card. Get errors on various lines when trying to install either. I have tried 3 different cables and 4 different computers with no luck on recognition

Well crap... I did have the USB issue on my work's XP Machine - but when I went home to my Windows 7 box - it ended up finding the phone fine and I was able to flash back to stock.
Any chance you can find a Windows 7 box?

Dont know anyone with one unfortunately. I need to install Win 7 through bootcamp on my mac. I tried to even get it to mount as storage through CWR on it with no success

Well.. I can say with 99% certainty you should be able to restore the phone.. also if you look at my sig - I just added a link to the OTA_JH7.zip that is CWM flashable if you could somehow get the zip onto your phone that is lol.
Hm.. and I dunno how the virtual box of Win7 will run - but it's worth a shot. Windows 7 seems to be superior when it comes to figuring out devices vs. XP. I was shocked when it found my then toasted phone (similar issue your currently experiencing).

Haha, I have your zip to as a matter of fact. I picked it up but I dont know how to get it put on the phone if it wont recognize usb. If CW usb mounting would have working I was gonna put it on the internal sd and let it flash it

and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer

vstarrydr05 said:
and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer
Click to expand...
Click to collapse
Duh.. been awhile since I've used MAC - you are quite correct

ok, on the flashing back either rom I get a error on line 10 trying to reflash AXURA and a error on line 12 with Cognition

Hmm. have you tried to do the factory reset from within CWM? I mean at this point.. can't lose anything by trying it.

Yeah, just did the wipe/factory reset through CWR. Still sticking on the same screen

Try this.
-Unplug the phone
-Uninstall all the current Samsung drivers you have, reboot
-Install this one, reboot
-Put the phone in download mode
-Plug the phone
Does windows install the drivers? If not continu
-Open Windows Device Manager and do a plug&play search
-If you have a ? device select it
-Right click/Update Drivers
-Select automatic...... if windows finds nothing return and select Manual.
-Choose the "Samsung ADB composite device" driver and install
Is the install successful ?
-Now unplug the usb cable
-Open Odin
-Plug the usb cable
Does Odin now see the phone ?

I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App

ronf1011 said:
I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Why would you brick a working phone based on a driver issue ?!
That's like blowing your car engine cause you can't communicate with onboard electronics........ unreal

[Q] Wont mount to PC or Mac

Hi all, I have scoured the web for similar issues and can't find any answers
-Captivate I897 running 2.1 formerly mounted to my MAC just fine, rooted using Galaxy-S one click root. Root was successful, mostly just removed bloatware, etc.. but alas my phone is no longer recognized by the computer, although the phone recognizes that it is connected, when I click "mount" nothing happens on the computer's end.
-Appears to be a problem with the phone, I have tried Win7 w/ Kies mini and installed/reinstalled drivers, dev mode, etc...nada. And here's the kicker - these machines will recognize and mount my GF's unrooted Vibrant just fine.
-I have a separate micro SD card reader that can read the SD card out of the phone that way.
-So, I am hoping for some help to either
1 - fix the computer recognition issue, or
2- find steps to manually update to 2.2 or unroot, etc, any ideas that will get me running 2.2 and hopefully mount to Mac or PC, using files manually loaded to the SD and installed during recovery mode, this looks like flashing, would Andromeda or Cognition fix the connectivity issue?
Thanks in advance!!

If you're rooted and can get into download mode (power off+2 volume buttons+plug usb in) then you can use this link ----> http://www.megaupload.com/?d=QL6NX702 to flash stock 2.2 firmware. Note: This WILL break your root. Here's the thread on Odin One Click as well---->http://forum.xda-developers.com/showthread.php?t=731989. You probably want to read the information there before flashing to 2.2.
Good Luck!

Thanks for the suggestion, I've tried multiple drivers, but since my PC doesnt recognize my phone, both Odin or Superoneclick dont recognize my phone also.
I was able to manually unroot by copying the One Click Root Update.zip to my phone via Wifi File-sharing app. Unroot was successful, but still no connection to PC or Mac.
I'm stuck for now, It appears that any type of flashing requires a PC connection, unless there is some way to flash completely with Wifi-copied files and using the 'reinstall packages' option?

Well, if you have a dropbox, you could drag and drop a rom (say cognition) onto your phone's dropbox. Then you'd need to find a CWM recovery (make sure it's not 3.0) update.zip and reinstall packages. This will give you CWM recovery, from which you could install Cognition from your dropbox. No guarantees it will work, but it's worth a shot.

Can't help on the Mac and I only have a dim memory of 2.1, but what are your setting under Settings/Applications for USB settings and Development? Do you have USB debugging checked (on)? Do you have the Development settings set to something weird like Kies update?
My recommendation is to put USB debugging on (checked). In that case I think the USB settings choice is disabled and therefore ignored. Then when you connect to the computer you will get a message in the notification bar on your phone saying something like "select to copy files to/from the computer". Click that, then click the mount button. You should then be able to see the extra drives on your computer by looking under My Computer or whatever (on a PC). On mine they are F and G, no special indications that they are drives on an attached phone. I also do get an automatic pop-up for the new drives, like when you insert a USB stick, but I imagine that setting could be disabled so look for the drives manually.

If you can get a com port try to do a master clear with the phone plugged in and on the entire time, then do various methods of getting into download mode if you got a com port when the phone booted up, future references I would use Odin to flash speedmod kernel to get cwm and then flash a rom or leave it as is, when I first started rooting I used the same software and got the same problem
Try installing all the drivers beforehand just to make sure
Sent from my I897 using XDA App

do u have the drivers installed?

Mr.AdAbsurdum said:
If you can get a com port try to do a master clear with the phone plugged in and on the entire time, then do various methods of getting into download mode if you got a com port when the phone booted up, future references I would use Odin to flash speedmod kernel to get cwm and then flash a rom or leave it as is, when I first started rooting I used the same software and got the same problem
Try installing all the drivers beforehand just to make sure
Click to expand...
Click to collapse
+1
My wife's phone has the exact same issue as OP. Suggestions like above are useless unfortunately as the phone does not recognize that it is connected to a computer. Instead it acts as though it is connected to a charger. The oddest thing is that if I plug it in to a computer while the phone is turned off, the phone will turn on! However, still no recognition that it is connected to a PC.
Initially when I connected the phone the first time, Win7 said driver failed to install. Then my working cappy would not connect to Win7. I had to uninstall and reinstall the drivers and restart. My working cappy connected as it should, but my wife's phone from that point refused to recognize anything but charging.
Attempts to fix Via external SD: (1) I transferred Continuum 4.1 and reinstalled. Still not recognized. (2) Transferred my recovery images from January for stock, but just became stuck on boot screen for Continuum. I am uneasy about transferring the update-recovery.zip and download folder from original backup as I do not know whether it will screw up attempts to re-enter recovery if it does not work. (3) Attempted download mode, but only works via CWM 2 (not extended menu or three button or by inserting battery with odin up trick). Even when in DL mode odin does not recognize the COM port. (4) Attempted different orders for connecting to Odin in DL mode. By orders I mean rearranging the order I connect (i.e. open odin then connect cable then go to DL). (5) transferred andromeda3 and reinstalled, still same issue.
So, I am left thinking a hardware failure occurred at some point, so I will need to open it up and check connectors to solder it possibly.
Possible non-hardware solution is to restore to stock somehow WITHOUT Odin via CWM. Anyone know if this is possible or have a link to a flashable zip?
Thanks!
edit: I am on Win7 and always made sure USB debugging was checked. Also I tried to connect via One-Click Root for the heck of it and kies mini. No luck.

flashed without a cable
Thanks for the tip jomeister 15, I was able to flash new roms dropped over wifi with CWM recovery. This got me onto 2.2 which was the main purpose of this whole adventure. I just loaded Andromeda3 and it's pretty darn impressive.
My PC and Mac still do not recognise my phone, I troubleshot extensively like Snowake and nothing is recognized. I'm convinced its a hardware issue but who cares with wireless flashing and file transfer.

snowake said:
+1
My wife's phone has the exact same issue as OP. Suggestions like above are useless unfortunately as the phone does not recognize that it is connected to a computer. Instead it acts as though it is connected to a charger. The oddest thing is that if I plug it in to a computer while the phone is turned off, the phone will turn on! However, still no recognition that it is connected to a PC.
Initially when I connected the phone the first time, Win7 said driver failed to install. Then my working cappy would not connect to Win7. I had to uninstall and reinstall the drivers and restart. My working cappy connected as it should, but my wife's phone from that point refused to recognize anything but charging.
Attempts to fix Via external SD: (1) I transferred Continuum 4.1 and reinstalled. Still not recognized. (2) Transferred my recovery images from January for stock, but just became stuck on boot screen for Continuum. I am uneasy about transferring the update-recovery.zip and download folder from original backup as I do not know whether it will screw up attempts to re-enter recovery if it does not work. (3) Attempted download mode, but only works via CWM 2 (not extended menu or three button or by inserting battery with odin up trick). Even when in DL mode odin does not recognize the COM port. (4) Attempted different orders for connecting to Odin in DL mode. By orders I mean rearranging the order I connect (i.e. open odin then connect cable then go to DL). (5) transferred andromeda3 and reinstalled, still same issue.
So, I am left thinking a hardware failure occurred at some point, so I will need to open it up and check connectors to solder it possibly.
Possible non-hardware solution is to restore to stock somehow WITHOUT Odin via CWM. Anyone know if this is possible or have a link to a flashable zip?
Thanks!
edit: I am on Win7 and always made sure USB debugging was checked. Also I tried to connect via One-Click Root for the heck of it and kies mini. No luck.
Click to expand...
Click to collapse
You could try to send a ROM, kernel, and update.zip(CWM flash) and attempt to get another ROM over it. Format the system, wipe dalvik, I don't think its a hardware issue, I had the same problem first time I tried using 1 click rooting, I just waited patiently and got a com port after about two days, so that just leads me to believe some configuration file was corrupted during flash to stock, possibly flashing a ROM or reflashing the ROM you're on with a complete wipe of the system and user data and whatnot, or possibly just doing a backup up from cwm and immediately restore it, if its charging I highly doubt its hardware
Sent from my I897 using XDA App

Replacement I897UCKB2 build is not seen by Windows 7

I have two windows 7 pcs that both recognized my replacement I897UCKB2 phone that I got a little over a week ago. I installed Kies on one of them to upgrade my wife's Cappy to UCKB1. I connected my phone and saw an error that it wasn't recognized. I have uninstalled KIES, the drivers, rebooted, cleaned out Samsung registry entries, rebooted (many times), tried different ports (including on the back), etc - no dice. I tried the other pc which hasn't had any changes and that doesn't recognize it either.
I know the cable is good because my wife's UCKB2 (was replaced as well) is seen no problem using the same cable and computer.
I have tried with my phone in debug and not - mass storage, KIES, ask on connection - etc. I did previously root the phone with SuperOneClick on this build. I was about to flash a custom ROM tonight after waiting a bit but now I can't get any computer to see it although the phone does start charging. I haven't yet tried linux and heimdall but that is about the only thing I can think of at this point.
I started wondering if Kies somehow caused a problem on the phone - maybe because it was rooted? I tried restoring CWM since I have Titanium backup working and busybox, etc. In CWM I tried "reboot into recovery" and then I see the original 3e recovery. I tried "reinstall packages" and it fails the signature verification. I have flashed ROMs many times in the past and have never been "stuck" like this... Any ideas?

I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.

crt60 said:
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
Click to expand...
Click to collapse
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.

RichMD said:
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
Click to expand...
Click to collapse
I had a friend who had that problem. When he plugged his phone into his computer, the phone would start charging but Windows wouldn't even play a notification sound to show the phone was plugged in. He couldn't access USB storage mode or anything. He called Samsung and was told his phone would need to be reflashed. His three button combo didn't work, so we bought a jig on eBay. We could get the phone into download mode that way...but Windows still/I] wouldn't recognize it. He called Samsung again and they replaced it under warranty, without any hassle.

Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...

pwneman said:
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
Click to expand...
Click to collapse
Thanks for the replies. I know the USB drivers are good because I can easily mount USB storage on my wife's captivate - same exact I897UCKB2 build with the same cable. Additionally, a second pc won't see my phone even though it did before. I have tried at least 6 different ports numerous times. I am thinking I need a replacement.
My question now is that it is rooted with busybox, etc and I can't use an unroot program from a PC. Will a factory reset under settings (not CWM) erase all traces of root?
Sent from my SAMSUNG-SGH-I897 using Tapatalk

[Q] Zero connectivity in download mode. £10 for solution. :)

Okay a little backstory:
I was on an early version of CM9 but as i am selling the phone i decided to put a more stable version of it on there and downloaded CM7 -stable.
I flashed this in CWM and it worked fine.
I gave it a quick test and noticed all the google apps were missing, most importantly the market. So i booted into recovery and realised i had forgotten to put the zip on the SD card.
I then went into mounts and mounted USB, nothing happened...
From that point onwards the phone would not talk to the PC. even if i booted up into the phone, it would just show it as charging. I could not find any options in the menus for USB options.
After some extensive reading, i tried a few things, none of them had worked. I found a post mentioning some kernels have issues with USB, so i downloaded the recommended one and flashed it in CWM.
After rebooting, CWM was now orange and not blue and the option to flash from external card has gone.
I have also done some digging and there is a good posibility that the kernal that i flashed was for the GT I9000 (which is the american one, right?)
So as it is at the moment:-
I can get into CWM.
I can get into download mode through the 3 button combo.
I can get into download mode using home made jig.
I can boot the phone, but it boot loops.
I can not get the phone to be detected on the pc.
Things i have checked:
Cable will connect other phones.
Tried different cable to be sure.
Phone used to be detected, but downloaded drivers through kies again to be sure.
Closed Kies using task manager.
Nothing is coming up in network connections in device manager when phone is connected.
I'm out of ideas now, so £10 PayPal donation for anyone that comes up with the solution to fix it
If i can get it detected, i can use Odin to flash what i want.

Sounds like a drivers problem. You may need the 'Google driver' developer.android.com/sdk/win-usb.html
When I had bootloops when I first installed CM9 I used heimdall to flash a the stock CM9 kernel. This gave me back CWM.
heimdall flash --kernel 'kernel.zip'
In the commandline.

Thanks for that,
I already had the Google USB drivers from when i installed the SDK to make some apps.
So i then gave Heimdall a try (Graphical Version), it seemed to suffer the same problem.
Reporting "Failed to detect compatible download-mode device."

I seem to remember the GUI saying I didn't have the correct drivers and it downloaded them for me.
The other thing worth a try is changing the USB port and reinstalling the correct drivers on that port.

I've not seen anything like that, it has not asked me for any drivers.
It's like the phone is not connected at all. nothing will detect it, i have even tried it on another PC.
Sorry, I'm not sure what you mean by installing on a port.

Well sometimes changing USB port will allow you to install new drivers. Although if you've tried it in another computer and it doesn't work then changing port may not help.
Does the phone appear in device manager when it's connected and in download mode?

Nope. Not coming up at all in the device manager. It didn't when it was booting fine. And it still doesn't in download mode. :-( I'm thinking the usb connector on the phone might be faulty.
But it was working up until trying to mount the USB in CWM
Sent from my GT-N7000 using XDA App

I don't suppose you have access to a Linux PC do you? Windows USB drivers are notoriously sucky. If you could plug it into a Linux PC and type 'lsusb' at a command line, that would at least show you that the device is really there.

I think I have a spare pc kicking around that I could use. I'll give it a go when I get home tonight.
Sent from my GT-N7000 using XDA App

Remove all the drivers completely from device manager for Samsung, then install fresh drivers and connect the cable when in download mode, hopefully it will recognize it

Are you sure the connector is clean? e.g. maybe there's dust in it.
I had that problem once, the connector was full of fabric fibers from some coat's pocket I had the phone in.

Suggestion 1 (Linux): I installed ubuntu, did not detected anything to even install any drivers. Detected my new phone fine.
Suggestion 2 (Uninstall drivers from device manager): I could not find any drivers named with the name Samsung in there.
Suggestion 3 (Clean port): I have some compressed air that i sprayed inside, it does look pretty clean and will continue to charge but still not connection on the pc.

To install the drivers for heimdall you have to run zdiag from inside the driver folder. Had to do this earlier on, the phone the other appeared as something other than Samsung composite usb or whatever it normally says

I tried this, and it displayed 9 devices after selecting show all. I seemed to recognise all of the items in the menu.
To be sure, I then disconnected the phone and re ran it to see if one of the items were missing, but it was the same number.

I too had problem with the usb connection on my i9000, and I was pretty sure my usb connector on the phone is somewhat damaged since it sometimes can only go to charging mode without being detected by my pc as a usb device. CWM instal is fine but ODIN can only detect the phone without able to flash the rom to the phone. The flashing will always stuck at the message "Setting Up Connection", I waited for 15 minutes and the flashing will eventually died. I retry the odin flash for 40 to 50 times and eventually the flashing will go through one time. Tried heidmall command line and the result is the same.

I have problem with Odin in the past. I bought a new laptop, running Win7 64 bit. Installed Samsung Kies to install the correct USB drivers for the phone. Then made sure that Kies wasn't running in the background. So tried using Odin. Odin was detecting the phone, but it was hanging at initialising connection. Odin was working fine on my old laptop running Win7 32bit. Long story short, I was having a few issues with my new laptop, reinstalled Win7 64bit, now Odin is working fine, have flashed the phone a few times using the new computer.

After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging

lovedonator said:
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
Click to expand...
Click to collapse
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.

Xyis said:
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Click to expand...
Click to collapse
You can directly download the ROM on your internal sd using dolphin browser or opera mobile

I can't do that either as the phone is currently boot looping.
Sent from my GT-N7000 using XDA App

USB connection to PC not working

My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone.
Here is a list of things I've already tried to fix the issue:
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM (without pc)
6. Installed Paranoid Android 0.2
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
If anyone can offer any help that would be great.
Thanks in advance.

ssyed said:
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone.
Here is a list of things I've already tried to fix the issue:
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM (without pc)
6. Installed Paranoid Android 0.2
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
If anyone can offer any help that would be great.
Thanks in advance.
Click to expand...
Click to collapse
Try another USB cable.

tknguyencsu said:
Try another USB cable.
Click to expand...
Click to collapse
As I have mentioned in my post that I've already tried multiple different cables, including the original.

Could be factory defect. flash original rom and take it to service center.

dsmas said:
Could be factory defect. flash original rom and take it to service center.
Click to expand...
Click to collapse
Phone used to work perfectly fine before. Already flashed original rom, it did nothing. And I've already talked to Samsung. They won't help me.
I've already mentioned that in my op! I would be nice to hear suggestions/solutions other than the ones I've mentioned.

Can anyone please help me out with this? I even tried cleaning the usb port a bit more, but no avail. I am guessing the file that recognizes a PC connection got corrupted some how. Anyone know how to update or replace that?