Hello Gurus,
I am bit novice and have HTC Touch Diamond locked with Airtel (INDIA). I have upgraded it to WM6.5 with deepshining 8.2 and then unlock it to use it with AT&T connection.
After unlock , its showing me signal strength of AT&T but I am not able to make and call neither able to receive any. Please guide me , whats wrong.
Also, from the day I have unlocked my HTC diamond, touch flow 3d also failing to launch everytime, I have tried hard reset , but of no use. I think, I am screwed now. Please help.....
Regards,
Ravish
Have you set up your connection?
Have you SIM unlock or Security unlock? This is to make sure you have unlock your phone to be able to receive SIM cards from any provider around the world.
About connection configuration:
Usually under Parameters -> Connections
This will set up your connection with your provider automatically...
You just need to select the correct provider (in your case AT&T).
Hope this can help!
Hi,
I would like to be able to modify my AT&T radio and change the default Mobile Network Code for my carier, is there any software to make easy to modify the ROM file ?
Thank
I'm not quite sure I understand what you're asking, but a radio will work on various different networks, depending on which SIM card you have in the phone. So I'm not sure that it's in the radio that you need to look.
What is it that you're trying to achive exactly, why do you want to change this code ?
Well, here is my problem;
I bought a Tilt 2 on ebay, and I also get an Unlock code for it. I have inserted my Bell SIM and the phone work correctly. I have configured the APN setting correctly and now I have internet without any problem.
The only bad thing is that the phone always think i'm in roaming, but that's not true. I have to deactivate all setting about roaming check, it's not a big thing but If I got to USA I will be charged for real roaming. and another downside is that many application pup info about roaming and data charge.
I'm searching since couple days to found a solution, and I'm pretty there is one but I have not enough knowledge on programming stuff. I've look all every registry in my phone and no one can't correct this ''roaming'' situation.
That's why im turning to Radio, since this phone is an AT&T, it's propbably seaching to compare SIM network provided and ROM network. I've found an interesting site about MMC/MNC http://en.wikipedia.org/wiki/Mobile_Network_Code
and found that the default network for AT&T is 310-410. Here in Canada We have bell and telus that use same technology then AT&T (UMTS 850 / UMTS 1900).
I would like to change the default ''home'' network code to 302-880. because my Sim Provided IMSI is 302-610 (Bell).
So to make it short. I want to change the default ''HOME'' network 310-410 to 302-880 so the phone will not be in a roaming profile.
Hope that someone can help me, and I'm pretty sure many people will appreciate this fix.
Thank You.
I don't know much about this, but surely it's your SIM card that is providing this code ? Since I could buy an unlocked Tilt 2 and put my own SIM card in it, and use it fine here in the UK on a UK network.
I can't believe that your phone thinks it's roaming just because it's a Tilt 2.
Yes, I found in my registry ProvidedIMSI="302610" that is the SIM registred network 302610 Bell HSPA network. So my SIM is telling the phone to use this network, but there is something in the phone that say it's roaming and not a home network. and I need to find and change this.
I'm not the only one in this situation and i would like to find a fix.
i have no knowledge about this only thing i can think of at the moment is just change the current radio version and flash a new rom. the latest version for radio is
4.49.25.95
and is found here ------> http://forum.xda-developers.com/showthread.php?t=549939
follow the right steps. [:d]
best of luck
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
BiOs2k said:
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
Click to expand...
Click to collapse
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
the show stopper said:
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
Click to expand...
Click to collapse
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
rooming
Hi
I do not know think you want to do with your tilt 2
Why you don't do a hard SPL and install a cocked rom !! as energy
I am using a tilt purchased from AT&T without contract
I get a unlock cod from the internet then I do a hard SPL it and install the energy rom in, is work like a charm with Rogers, without any problem( only the gps wish I never try
Perhaps this is can resolve your problem you should try
thanks
Already done Cjoco My Tilt 2 is Unlocked and Hard-SPL with latest EnergyROM.
Like I said before, SIM ROGERS work like a charm in my phone, No roaming warning. but with BELL and TELUS SIM I get the Roaming notif but it's not true, Im connected to BELL and VOICE,DATA,etc. work #1.
People say that it work with ROGERS because this carrier have a fallback signal if 3G is not available, with BELL if I lose 3G signal my phone doesn't work.
BiOs2k said:
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
Click to expand...
Click to collapse
then i think problem is with your sim card not with your phone. Just get your sim card replaced and i am sure the problem would be resolved.
the problem may be with his sim card, but im not sure replacing it will fix anythibng. im also with bell and have the same problem on my fuze.
bios2k, how old is your sim card?
bobzero My SIM card is 2 Week Old. so, i'm not sure it because my SIM is old.
I'll give a call at tech support @ BELL to see if they know why it doing this. I'm not sure if they will be enough good to explain this situation.
I've read last night on many forums the RILPHONE.DLL could be a possible cause of our problem.
In my config I can select GSM(850,1700) + UMTS(850,1700) but there is no option to select UMTS only. so maybe the phone is searching for GSM first (rogers) that's why when I insert a ROGERS SIM my phone is not roaming.
Is there a way I can extract RILPHONE.DLL for our EnergyROM or Stock Tilt 2 rom. Maybe I can ask a Programmer to take a look at this DLL to see the code.
I'll let you know.
I've just talk with BELL technical support and they have no idea why I'm the phone say it's in ROAMING. I've talk to the billing department and they say I don't have any ROAMING fees, so nothing to worry about..
Now, I'm still at the same state = no solution
Same here.
I was checking around and found many got this problem, including BBs. Now, some claimed that after upgrading the O/S for his BB, it went away. Another person with different device upgraded his O/S and started having that problem, and it wasn't there with stock ROM.
Make me think it has to do with the software side of thing and nothing to do with SIM or radios. To pinpoint what is causing it, can be a tough task though.
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
BiOs2k said:
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
Click to expand...
Click to collapse
You should try to change the radio and rom of your phone. Make sure to Task 29 b4 flashing. Another thing to make sure is you use the right radio, i mean the specific radio for telus, t-mobile or att.....
Wrong radio can also cause such problems.
I have the same issue with my Unlocked Tilt2 on Telus. I found a lot of people with unlocked winmo devices on bell/telus complaining of this problem and never have seen a solution. People say that a Fido sim will do the same thing. Only Rogers sims seem to not show roaming. PLEASE post if you find the solution or even cause of this.
I just did task29 and reflash ROM. I soon as I have the main menu Roaming Icon appear on top just beside or 3G.
Damn!! still stock with this roaming issue
anyone have Q's ?
Hello,
in Uk a brought a Galaxy-S (T-mobile) and unlocked it. Now I'm back in Italy and I put my old SIM card. The Phone works, except for 3g, edge or any mobile connectivity. I think there is two options:
- The phone is still locked.
- My sim is very old (from 1999), may be no more compatible with 3g.
How do I find out which is the case and how I solve that?
Thanks guys (girls too).
No network
Hi m8
Could you please check your imei number, I did exactly the same.
I bought my sgs on firmware 2.1 & unlocked it via free unlock tool, I then messed with some new firmwares. Recently tried to sell my phone as unlocked but when buyer put their sim in, It shows a signal but no data network connection.
After messing around with different sims i did a check & noticed my firmware is some stupid 04999????
Regards
Mark
What does that mean?? Is it related to IMEI somehow?? What should I check about it? How do I fix that? I've 2.2 by the way
Hello guys! I've been reading these forums for a long time, amazing what you guys do in here
Here is my problem: I live in México, and I traveled to USA for summer vacation, my mexican mobile phone carrier uses 850mhz (TELCEL) and when I went to USA it was using ATT's network.
So everything was working fine, but when I returned just before I was about to cross the border, it stoped working!
It has a message that says ''Emergency calls only'' where it's supposed to say ''TELCEL GSM'', so no internet, no calls, no messages.
I was using Froyo on my phone, and thought of doing a reset to restore factory settings on the phone, but it did not work :/
Then I updated my phone to Darky's Rom 10.2 (Gingerbread) and it's still not working!
When I go to Settings>Wireless and network>Mobile networks>Network operators I can see that my carrier is available to select, but when I try to, it gives me a ''Unable to connect. Try later'' msg.
It is really frustrating because I depend on my phone so much, mainly because I share my 3G connection to my laptop for school's work and stuff.
There's one weird thing though, I unlocked my phone, and placed a MOVISTAR(1900mhz) SIM card on it, AND IT WORKS!!!
But the thing is that I don't have internet on that SIM card(is prepaid and it's EDGE, not 3G), and on my TELCEL SIM card I have a contract to complete (still a year to go).
When I put my SIM card on someone else's phone, it works like a charm, but if I try to put a TELCEL (850mhz) SIM on my galaxy; just says ''Only emergency calls''
What do you guys think happened to my phone? I would really appreciate your help.
flash a new modem... one that contains more frequencies enabled.. any bell or telus will do.
UGKC1 modem should fix your problem.
It did not work, should I keep trying with other modems?
you can.. jk4 or jl2 are other modems with 850 and 1900 enabled... maybe your problem is different then I thought... but it sounds like your modem... maybe try unlocking your phone? if you can connect to wifi download sgs unlocker pro (paid app) in the market to unlock, your phone also needs to be rooted. are you using the i9000T? that may be different problem altogether...
edit: sorry I see you said it is unlocked... just doesn't sound like it...
a) modem related (ugkc1) should have fixed that
b) SIM carrier not compatible to phone (unlock phone to fix)
c) Busted SIM card, check in other phone
d) make sure phone option is set to Automatic CDMA/GSM
sounds like you checked everything I would check....
does your 3G work... make sure your VPN is setup to your carrier
maybe imei got blocked...? only way around that is to get provider/samsung to unblock
Hey have you solved this, I have the same problem
my solution
http://forum.xda-developers.com/showpost.php?p=25509654&postcount=279
Hi i have rooted XL and i have problem with signal gsm, sometimes wifi . my signal is still getting lost in town, outside the city signal is missing. . I think that i have wrong radio or somethin. Newbie here, so please keep calm
kubiak007 said:
Hi i have rooted XL and i have problem with signal gsm, sometimes wifi . my signal is still getting lost in town, outside the city signal is missing. . I think that i have wrong radio or somethin. Newbie here, so please keep calm
Click to expand...
Click to collapse
What is your city and what ROM are you on?
help
i have bought sensation xl from dubai. and i am using that in india
my problem is that my data connection get disconnected automatically and i have to again connect it manually from setting. or i hav to restart the phone to get connected again..
i need a stable connected data connection always due to business work.
do i have to change the rom of saudi arabia to asia india ?
i am a total newbie so dont know anything how to fix this problem can anyone please help me out ? plz ?
kumar678913 said:
i have bought sensation xl from dubai. and i am using that in india
my problem is that my data connection get disconnected automatically and i have to again connect it manually from setting. or i hav to restart the phone to get connected again..
i need a stable connected data connection always due to business work.
do i have to change the rom of saudi arabia to asia india ?
i am a total newbie so dont know anything how to fix this problem can anyone please help me out ? plz ?
Click to expand...
Click to collapse
I believe there shouldnt be any problem if your phone is from Dubai becasue I have seen quite a few phones coming from Dubai and they work pretty fine in other countries. Try doing following and see if this fixes the problem.
* Settings==>Mobile Network==>Network Mode (select to GSM Only if your company doesnt provide 3G) or (select "WCDMA Only" if your company provides 3G)
* If aforementioned doesnt work then try flashing this http://forum.xda-developers.com/showthread.php?t=1680776 if your phone is rooted (if not rooted then unlock bootloader from htcdev.com and then look for a rooting threat http://forum.xda-developers.com/showthread.php?t=1625841 and then use this tool http://forum.xda-developers.com/showthread.php?t=1865265 to flash recovery and S-Off your phone
Please try inserting another operator's SIM in your SXL and see if it has same issue. If not then it means your phone is working fine and then you need to contact your Network provider to fix your GSM Signal issue at their end.
Report back if this works or doesn't work