Some people, including me, have problems with the barcode scanners on jpu. I attached a logcat file, i recorded while opening barcode scanner and it fc't.
Can someone with experience in that take a look and hopefully recognize what happens?
Thanks in advance.
Mercury0660 said:
Some people, including me, have problems with the barcode scanners on jpu. I attached a logcat file, i recorded while opening barcode scanner and it fc't.
Can someone with experience in that take a look and hopefully recognize what happens?
Thanks in advance.
Click to expand...
Click to collapse
I have this problem also, can someone help to solve?
Sent from my GT-I9000 using XDA App
You need to install a new jpu kernel. The one that works 100% for me is voodoo advance 5 ver 1.1....you can try the other ones but read them carefully to see if it fixes camera apps or mounting problems
Written using grafitti on a Palm VIIx with 8 megs of ram and overclocked to 32mhz!
ickyboo said:
You need to install a new jpu kernel. The one that works 100% for me is voodoo advance 5 ver 1.1....you can try the other ones but read them carefully to see if it fixes camera apps or mounting problems
Written using grafitti on a Palm VIIx with 8 megs of ram and overclocked to 32mhz!
Click to expand...
Click to collapse
The thing is that it was working on fresh installation of hamster's rom just about half an hour ago, and I didn't change the kernel, but it still stopped working.
Sent from my GT-I9000 using XDA App
Just do it. What can you loose other then 30 mins to disable lagfix then turn on again after kernel update. But hey if you don't want it fixed don't do it, I ain't getting payed to fix your problems
Written using grafitti on a Palm VII with 8 megs of ram and overclocked to 32mhz!
ickyboo said:
Just do it. What can you loose other then 30 mins to disable lagfix then turn on again after kernel update. But hey if you don't want it fixed don't do it, I ain't getting payed to fix your problems
Written using grafitti on a Palm VII with 8 megs of ram and overclocked to 32mhz!
Click to expand...
Click to collapse
Your advise didn't help, but thank you anyway. I have reflashed Jim's rom and barcode scanner works again. But remembering that last time I flashed this same rom and barcode scanner stopped working after a few reboots, this time everything is working and there are no new kernels our anything like that involved. So, this problem is real mystery for me and many other users.
Sent from my GT-I9000 using XDA App
Same for JPX. After few minutes before the installation it didn't work anymore. Somebody know something new about that?
ondoteam said:
Same for JPX. After few minutes before the installation it didn't work anymore. Somebody know something new about that?
Click to expand...
Click to collapse
Is it kies jpx you are talking about our one of the jpx based custom roms? What kernel do you use, and if you started from official, non rooted jpx, was this working there our not?
Sent from my GT-I9000 using XDA App
brack11 said:
Is it kies jpx you are talking about our one of the jpx based custom roms? What kernel do you use, and if you started from official, non rooted jpx, was this working there our not?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
JPX from samfirmware. It was installed over a clean JPU from samfirmware too. Now I'm using SpeedMod, but it stop working before install the new kernel :S
EDIT: http://kernel.1ug.org/voodoo.advanced.v1.2.tar solve my problem
ondoteam said:
JPX from samfirmware. It was installed over a clean JPU from samfirmware too. Now I'm using SpeedMod, but it stop working before install the new kernel :S
EDIT: http://kernel.1ug.org/voodoo.advanced.v1.2.tar solve my problem
Click to expand...
Click to collapse
Really? Can Darky's 6.0 flash this voodoo.advanced.v1.2?
I flashed voodoo.advanced.v1.2 kernel, Barcode Scanner FC issue was fixed.
andyhan said:
I flashed voodoo.advanced.v1.2 kernel, Barcode Scanner FC issue was fixed.
Click to expand...
Click to collapse
Did the same, it fixed the problem but don't know for how long...
Sent from my GT-I9000 using XDA App
I upgrade from Darky's ROM v6.0 to v7.0, barcode scanner Fc is back.
I flashed voodoo.advanced.v1.3-20101222-17.14.tar, barcode scanner FC issue was fixed.
same problem here stock jpy... both backlight notif. and cf root kernels i am having secondary camera apps fc... reflashing it works for a little while and then boom again.. the link to that kernel is gone.. any suggestions..
thanks
ANYway i dont really wat a lagfix kernel.. but cannot live without 2e so i can run clockwork mod.. can anyone just make a stock kernel for jpy with 2e recovery that doesnt kill camera apps ????
thsnks
lgkahn said:
same problem here stock jpy... both backlight notif. and cf root kernels i am having secondary camera apps fc... reflashing it works for a little while and then boom again.. the link to that kernel is gone.. any suggestions..
thanks
ANYway i dont really wat a lagfix kernel.. but cannot live without 2e so i can run clockwork mod.. can anyone just make a stock kernel for jpy with 2e recovery that doesnt kill camera apps ????
thsnks
Click to expand...
Click to collapse
You don't need to use lagfix with voodoo kernel, out will serve you as CWM with 2e. I use that kernel for improving battery life and for making camera apps working, so, there are no obligations in using voodoo kernel. By the way - I use latest v69 of advanced voodoo kernel now, no problems with camera apps.
Sent from my GT-I9000 using XDA App
Related
This is simply a Flashable ZIP I made out of eugene373's Eugene_2E_JK2_Froyo.tar.md5 for those of you that don't feel safe using / can't use Odin.
It flashes his kernel, modem, and the stock JK2 system.
The only change I made was adding the Stock Android Keyboard and upgrade Superuser.apk !
Rom Manager works... OCLF should work...
Working GPS.
Wi-Fi Calling.
This is a Vibrant kernel and a Vibrant ROM. It was built FOR the Vibrant.
~ 2E Recovery
~ Busybox installed
~ Market Paid App Fix
~ Hoping SD Mounting Issue's are Fixed as well.
~ Few CSC Fixes
~ Browser Default Home Page is Now Google.com ( not web2go )
~ GPS Fix ( Like the Old First GPS Fix I Posted ) My New Vibrant is Like the Old one, never Locked... Wont effect those that do Lock!
~ USB Debugging Turned on by Default
~ Recovery Does not Hang after Odin now
Click to expand...
Click to collapse
Flash via ROM Manager or Clockwork Recovery... Disable Voodoo... blahblah...
This flashes a kernel + ROM so it can be flashed over Macnut, it can be flashed over old AOSPish, it can be flashed over JFD, it can be flashed over...ANYTHING except Voodoo Lagfix!
Download Odexed: Stock Vibrant JK2 Froyo Flashable Zip (dbus.conf fix included)
Deodexed version coming soon...
Enjoy...
Lag Fix?
Download RyanZA's OCLF 2.0 from market
1. Install EXT2 Tools
2. Restore Boot Animation
3. OneClickLagFix V2.2+
Click to expand...
Click to collapse
Want to go back to Eclair from this?
Flash any of my Vibrant AOSPish v1.4 JI6 or Bionix Fusion builds straight through ROM Manager or Clockwork Recovery to go back to Eclair. They will flash a JI6 kernel and JI6 for you right from this, and you're good to go.
Click to expand...
Click to collapse
Condition your battery life!
1. Charge phone completely, leave plugged into power
2. Boot into recovery
3. Wipe battery stats
4. Reboot to normal
5. Remove power cable
6. Drain that sucker all the way
7. Recharge fully
8. Rejoice!
Click to expand...
Click to collapse
Thank you! This will make it a lot easier for those of us who prefer not to use Odin.
Screwed up SuperUser somehow. Fixing...
misteroptimist said:
Thank you! This will make it a lot easier for those of us who prefer not to use Odin.
Click to expand...
Click to collapse
Or who got broken comp's and cant.
Sent from my SGH-T959 using XDA App
Was wondering did this rom have the dialer with the video call button and funny sounds when u punch a number?
Sms vibrant black body glove
Rom-macnutR2 kernel #53
Latest cwm
Black Htc G1
Sparksmod1.7
Latest radio death spl
Oc kernel 617mhz jit enabled ram hack
diazf09 said:
Was wondering did this rom have the dialer with the video call button and funny sounds when u punch a number?
Sms vibrant black body glove
Rom-macnutR2 kernel #53
Latest cwm
Black Htc G1
Sparksmod1.7
Latest radio death spl
Oc kernel 617mhz jit enabled ram hack
Click to expand...
Click to collapse
No that would be an i9000 port. This is the legit Vibrant Froyo JK2 leak.
Upload finished, link re-added, see OP.
Dammit, I wish I waited for this before I switched to Team Whiskey's Obsidian V2 Froyo ROM. Meh, I'm done flashing ROM's been flashing and re-flashing because I screwed up somewhere along the line. I'll be back for this later though! Thanks for the upload man.
Anderdroid said:
Upload finished, link re-added, see OP.
Click to expand...
Click to collapse
Can I flash this over Macnut 10? Or will the built in lag fix from Macnut cause issues? If not, Ill have to just use ODIN. thx
Has anyone been able to flash this yet? Dload did not work for me.
Sent from my SGH-T959 using XDA App
shovelhead83 said:
Has anyone been able to flash this yet? Dload did not work for me.
Click to expand...
Click to collapse
Yes. Just flashed it. Looks good so far.
shovelhead83 said:
Has anyone been able to flash this yet? Dload did not work for me.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Installed and working...flashed this over Macnut R10 with no issues...Seeing if OCLF works now
Bummer, I dont have odin access for a while and tried zip twice. Says not supported on my phone.
Sent from my SGH-T959 using XDA App
giografix said:
Installed and working...flashed this over Macnut R10 with no issues...Seeing if OCLF works now
Click to expand...
Click to collapse
Hey update us on how well that goes with this Rom flashed over Macnut R10 and how well the OCLF works. Thanks in advance.
techboydino said:
Can I flash this over Macnut 10? Or will the built in lag fix from Macnut cause issues? If not, Ill have to just use ODIN. thx
Click to expand...
Click to collapse
I'm wondering this myself I'm away from home for a few days so no pc available.
Update: should have read OP I was driving sry
Sent from my GT-I9000 using XDA App
PreLagfix Quadrant 839 ... Post Lagfix Quadrant 1649 ... OCLF worked without a prob...
Update...Dont Recommend it...Phone is running like crap and crashing
shovelhead83 said:
Bummer, I dont have odin access for a while and tried zip twice. Says not supported on my phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Install Astro File Manager. Then open it, hit Menu, hit Preferences, and Enable Browser Downloads.
After running Logcat I noticed that this was missing a file. /system/etc/dbus.conf
I don't know what it does, but Logcat complained about it often. I think this may cause 'battery life' to not be as well, but it didn't seem to have any issues. I am uploading another new one right now that has this file. It didn't get pulled when I pulled the system so I copied over the one from Obsidian and the Logcat stopped complaining about it.
I attached dbus.zip for those of you that don't want to redownload the ROM and want to 'fix' this. Just unzip it and put dbus.conf in /system/etc via adb push or root explorer.
If you aren't sure if you need it, check your /system/etc folder in root explorer and see if dbus.conf is there. If it isn't, add it. I didn't notice any issues other than logcat complaining with this file's absence.
is it deodexed?
Anderdroid said:
Install Astro File Manager. Then open it, hit Menu, hit Preferences, and Enable Browser Downloads.
Very cool, it's dloading now. Thanks!
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
SmartBrother90 said:
is it deodexed?
Click to expand...
Click to collapse
No. I may release a deodexed version later. Maybe tomorrow.
First off I gotta say thanks to Jellette, Eugene, and all of Team Whiskey for their awesome work making roms and kernels.
I thought this fix deserved its own thread so it won't get lost for future reference.
Included fixes: GPS, WIFI, Language, and the Soft Reboot fix by Eugene.
These .zip's are flashable through CWM
If you are running Darkys latest 9b3 rom use the Darky.Pack.zip
If you are running a stock I9000 rom use the I9000.Pack.zip
It works for me using the manual way. (pushing files using file explorer)
Again thank you!
how is the battery on darky?
Is this confirmed to get the GPS working?
Yes this is confirmed working and no idea on battery life since I haven't used Darkys rom for more than a few hours.
I flashed through clockwork and gps is still a no go for me on darkys.
Sent from my GT-I9000 using XDA App
shovelhead83 said:
I flashed through clockwork and gps is still a no go for me on darkys.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I wouldn't flash that, I'd use root explorer to push the files inside it.
Edit - I take that back, flashing should work just fine.
Whoever is running Darky's ROM....HOW did you solve the issue where the phone CAN'T receive incoming calls?
Rings once and tries to load the call screen but fails and drops the call.
啊喔鹅咦呜鱼 said:
how is the battery on darky?
Click to expand...
Click to collapse
Eugene said battery should be par with stock if you're using the dead horse kernel.
}{Alienz}{ said:
Whoever is running Darky's ROM....HOW did you solve the issue where the phone CAN'T receive incoming calls?
Rings once and tries to load the call screen but fails and drops the call.
Click to expand...
Click to collapse
You may be isolated to this issue.
Sent from my GT-I9000 using XDA App
shovelhead83 said:
I flashed through clockwork and gps is still a no go for me on darkys.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I retract! I did not have google locations checked.
Sent from my GT-I9000 using XDA App
}{Alienz}{ said:
Whoever is running Darky's ROM....HOW did you solve the issue where the phone CAN'T receive incoming calls?
Rings once and tries to load the call screen but fails and drops the call.
Click to expand...
Click to collapse
This happens to me to. Have to have my phone for tomorrow so flashed back to trigger. For me it's incoming call wait calls.
}{Alienz}{ said:
Whoever is running Darky's ROM....HOW did you solve the issue where the phone CAN'T receive incoming calls?
Rings once and tries to load the call screen but fails and drops the call.
Click to expand...
Click to collapse
I had that issue when I first flashed the rom and did not wipe my data/cache partition. Just wiped from CWM and the problem (among others) resolved.
Moved files with Root Explorer but still no GPS.
Full fix pack for any stock 2.2 or 2.2.1 I9000 Rom
Add this to the OP bro, and in advanced editing change the title to full fix for all 2.2.1 I9000 Roms.
Flash for GPS, WIFI, Language, Soft Reboot fix [by Eugene] of any 2.2.1 stock rom - This flash along with Eugenes original flash will break the functionality of custom roms like darkys due to the services.jar not being correct.
啊喔鹅咦呜鱼 said:
how is the battery on darky?
Click to expand...
Click to collapse
Would someone, who is running Darky, just start a Darky thread? I see tons of Darky posts in all these other developer's threads, or in a GPS fix thread.
Just make a Darky thread, then post all your questions, answers and observations on Darky there; instead of cluttering up/de-railing other threads
Jellette,
Your post above sounds like you are saying flashing this AND Eugene's service.jar will break i9000 2.2.1 custom roms. Thought you need to flash/push both fixes, or your combo zip a few posts above?
one more qu. Could we push the fix files into the rom's zip before flashing.
SykesAT said:
Jellette,
Your post above sounds like you are saying flashing this AND Eugene's service.jar will break i9000 2.2.1 custom roms. Thought you need to flash/push both fixes, or your combo zip a few posts above?
Click to expand...
Click to collapse
Same question, should I just remove the service.jar, or can I just flash this one over it?
jellette said:
Add this to the OP bro, and in advanced editing change the title to full fix for all 2.2.1 I9000 Roms.
Flash for GPS, WIFI, Language, Soft Reboot fix [by Eugene] of any 2.2.1 stock rom - This flash along with Eugenes original flash will break the functionality of custom roms like darkys due to the services.jar not being correct.
Click to expand...
Click to collapse
So if I'm already on Darkys rom and I already pushed the services.jar file and I decide to flash a different i9000 rom will it mess up my phone if I use the i9000 pack after I flash the new rom? Sorry if it is a noob question.
Thanks
Sent from my GT-I9000 using XDA Premium App
This didn't fix my GPS on darky rom
Sent from my GT-I9000 using XDA App
Hi all.
I am currently using the latest version of Slick2X-F 4.1 606 ril.
I think i have found out why my phone reboots spontaneously sometimes (2 reboots a day and sometimes more depending on where i am)
It happens when switching from 3G + WIFI, this leads me to think it's a error in the WIFI driver / 3G /H or we need a kernel patch.
I have tried all basebands and now i am using the newest and 606 ril.
Could a developer please take a look at this log.
http://xwb.dk/android_debug.log
I know it says kernel panic but the question is why it goes into kernel panic, i am a skilled Linux administrator but i can't figure out why.
I hope this helps others which is currently in the same situation.
Please help.
Thanks in advance.
I dont know much about this, but have you tried a different kernal?? to see if this still happens??
If it is the kernal that is causing the problem surely everyone else using that rom + kernal would be experiencing the same.
Kickasskev said:
I dont know much about this, but have you tried a different kernal?? to see if this still happens??
If it is the kernal that is causing the problem surely everyone else using that rom + kernal would be experiencing the same.
Click to expand...
Click to collapse
I have tried 2 different kernels, maybe you can recommend one ?
Thanks
kurt666 said:
I have tried 2 different kernels, maybe you can recommend one ?
Thanks
Click to expand...
Click to collapse
You can try
http://forum.xda-developers.com/showthread.php?t=1119771
or
http://forum.xda-developers.com/showthread.php?t=1029799
these are the two i used.
looks like you are using "2.6.32.9-fakeShmoo-psycho-Cpasjuste.5-g28982b2-dirty", kernel, while as far I know this kernel only works with stock/mcr? btw, may i know how do you catch kernel panic? i still don't know how to track kernel for problem when it get stuck in LG boot.
fajarep said:
looks like you are using "2.6.32.9-fakeShmoo-psycho-Cpasjuste.5-g28982b2-dirty", kernel, while as far I know this kernel only works with stock/mcr? btw, may i know how do you catch kernel panic? i still don't know how to track kernel for problem when it get stuck in LG boot.
Click to expand...
Click to collapse
I catch kernel panic when my OX2 automatically switches from 3G/H to WIFI i have just tried to switch off WIFI and i didn't catch kernel panic for a whole day, sometimes it did it 2 - 3 times a day.
I have also tried to shutdown facebook sync, because i read in the debug log sometimes about sync, that could also be the key i am not sure.
Kickasskev said:
You can try
http://forum.xda-developers.com/showthread.php?t=1119771
or
http://forum.xda-developers.com/showthread.php?t=1029799
these are the two i used.
Click to expand...
Click to collapse
Thanks i will try those in the weekend.
I havn't had a single kernel panic since i removed facebook sync and uninstalled Y5.
I will now install Y5 and setup auto wifi on/off and see if the kernel panic comes back, if not it must be facebook sync.
btw i have not tried a new kernel.
kurt666 said:
I havn't had a single kernel panic since i removed facebook sync and uninstalled Y5.
I will now install Y5 and setup auto wifi on/off and see if the kernel panic comes back, if not it must be facebook sync.
btw i have not tried a new kernel.
Click to expand...
Click to collapse
I always use seesmic for FB and TW. Maybe sns will work, when i get my phone back from repair (dust under the screen) I'll update the rom. This the fourth time i get a new O2X due to hardware faults...... dead pixels etc... but that's not on topic
Sent from my HTC Desire using XDA App
peewster said:
I always use seesmic for FB and TW. Maybe sns will work, when i get my phone back from repair (dust under the screen) I'll update the rom. This the fourth time i get a new O2X due to hardware faults...... dead pixels etc... but that's not on topic
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Thanks will try seesmic. Good luck with your phone
And thanks for this nice rom.
Sent from my LG-P990 using XDA Premium App
Kickasskev said:
You can try
http://forum.xda-developers.com/showthread.php?t=1119771
or
http://forum.xda-developers.com/showthread.php?t=1029799
these are the two i used.
Click to expand...
Click to collapse
tried moops_r3.zip but i am unable to boot up using that kernel.
tried ternityProject Kernel --Experimental Branch-- v2.3 FroYo -update.zip which is so far working great.
This is due to i i had 2 times kernel panic the last 2 days, and i didn't install Y5, i did however use WIFI and 3G/H.
Update:
just flashed EternityPRJ_P990KRN_1.5b.zip due to BSOD 2 times using ernityProject Kernel --Experimental Branch-- v2.3 FroYo -update.zip.
Will update you later about the progress.
Now sorry for posting, you probably get real annoyed with n00bs asking this all the time... But I was wondering for CM7 could I simply follow this guide-
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide when my phone is on 2.3 Official
Or would I need to go back to the froyo bootloader and do it from there...
Also I have used CM7 (LG Optimus One) for a long time and I am looking for a change i.e MIUI! If I'm on stock gingerbread could I just follow this guide-
http://www.galnetmiui.co.uk/content/getting-started.php
As I would prefer to flash MIUI over CM7.
Thanks for your Help!
You can do either bud, but going from froyo ensures a clean installation with a clean bootloader, flash stock I9000XXJPU, then flash Speedmod Kernel k12c (froyo) make sure CM7 is on your internal SD card, boot into recovery (vol up + home + power) , mounts and storage, format system, data, cache and datadata, its always best to install a kernel cleaning script too but not essential, then flash CM7 and Viola! Let me know how you get on bud
Sent from my GT-I9000 using XDA Premium App
Thanks mate, worked like a charm,
Just wondering is it worth flashing a different kernel (I ended up installing MIUI)...
I think I installed SpeedMod (whatever came with the EZBase Package).
Anyway what am I best to install?
Cheers
hasamoder said:
Thanks mate, worked like a charm,
Just wondering is it worth flashing a different kernel (I ended up installing MIUI)...
I think I installed SpeedMod (whatever came with the EZBase Package).
Anyway what am I best to install?
Cheers
Click to expand...
Click to collapse
my personal choice would be glitch which comes with oc/uv abilities
hasamoder said:
Thanks mate, worked like a charm,
Just wondering is it worth flashing a different kernel (I ended up installing MIUI)...
I think I installed SpeedMod (whatever came with the EZBase Package).
Anyway what am I best to install?
Cheers
Click to expand...
Click to collapse
Your welcome bud I'd flash Glitch Sooooo quick and with OC ability, its perfect for CM7/Miui
Sent from my GT-I9000 using XDA Premium App
Done! But after flashing MIUI my g-sensor is way out of whack. Playing games like teeter and MX-Moto they move straight to the left
Plus all fixes involve FROYO
Hey bud you need to use the terminal emulator on your phone and run this command
adb shell
su
/system/bin/sensorcalibutil_Yamaha
Then make sure your phone is completely horizontal taking into account the little bump we have at the bottom of our phones, so you need to make it completely flat then press start, once done then reboot
Sent from my CM7 modded I9000. Kernel is one mean son of a Glitch!
djice000 said:
Hey bud you need to use the terminal emulator on your phone and run this command
adb shell
su
/system/bin/sensorcalibutil_Yamaha
Then make sure your phone is completely horizontal taking into account the little bump we have at the bottom of our phones, so you need to make it completely flat then press start, once done then reboot
Sent from my CM7 modded I9000. Kernel is one mean son of a Glitch!
Click to expand...
Click to collapse
I did that said it was successful but no change....
BTW I did by coping the files using root explorer out of darky's rom as miui doesn't have them but no change.
hasamoder said:
I did that said it was successful but no change....
BTW I did by coping the files using root explorer out of darky's rom as miui doesn't have them but no change.
Click to expand...
Click to collapse
I know its a long shot but you can also try waving your phone in a figure of 8 for around a min, let me know if this helps bud
Sent from my CM7 modded I9000. Kernel is one mean son of a Glitch!
Yea that fixes the magnetic thing (compass) still no luck :/
Sent from my Samsung Galaxy S using XDA App
hasamoder said:
Yea that fixes the magnetic thing (compass) still no luck :/
Sent from my Samsung Galaxy S using XDA App
Click to expand...
Click to collapse
Any Ideas.....
Nah mate I'm sorry, maybe a hardware fault, or try flashing rom again but on a flat surface, that's all I can come up with dude, sorry, best of luck
Sent from my CM7 modded I9000. Kernel is one mean son of a Glitch!
hi out there, anyone of you facing the camera failure??
i'm currently using RC2, restarted my mobile more than 20 times, changed other ROM still cant make my camera works....
anyone hv solutions on this??
million thanks...
Hmm... do you install the rom through CWM on a proper procedure? Coz i have no problems at all...
Sent from my CSL-MI410 using XDA Premium App
It was fine when i rooted last month, only happened last 2day when i ean to use it
If u could elaborate how u install the RC2, maybe i could help n find the solution for u.... its quite simple actually... sometimes slight mistake in installing, can make it go wrong... i know coz i have been doing it since i got my xperia x8 a year ago... if u cn try to install rc1 first then upgrade to rc2...
Sent from my CSL-MI410 using XDA Premium App
ya, I'm upgrading from rc1 to rc2, as follow the step provided from lyn
blackode said:
If u could elaborate how u install the RC2, maybe i could help n find the solution for u.... its quite simple actually... sometimes slight mistake in installing, can make it go wrong... i know coz i have been doing it since i got my xperia x8 a year ago... if u cn try to install rc1 first then upgrade to rc2...
Sent from my CSL-MI410 using XDA Premium App
Click to expand...
Click to collapse
hi
this is something i have not done u mean
1.flash rc1 via CWM
2.flash rec2 via CWM from rc1
and this would make RC2 work better
i usually have flashed RC2 strait via CWM
kindly explain on the same
works fine with rc2...
sent from my Spice MI-410 XDA Premium
haree said:
hi
this is something i have not done u mean
1.flash rc1 via CWM
2.flash rec2 via CWM from rc1
and this would make RC2 work better
i usually have flashed RC2 strait via CWM
kindly explain on the same
Click to expand...
Click to collapse
flash rc1 via CWM? weird... i flash my rc1 using SUT software as the file was in .nbo then start flashing rc2 via CWM. i wouldnt dare to flash rc2 straight because from my opinion, rc1 is a base firmware and therefore i think its best and play safe to go a long way rather to be sorry.
blackode said:
flash rc1 via CWM? weird... i flash my rc1 using SUT software as the file was in .nbo then start flashing rc2 via CWM. i wouldnt dare to flash rc2 straight because from my opinion, rc1 is a base firmware and therefore i think its best and play safe to go a long way rather to be sorry.
Click to expand...
Click to collapse
install over rc1 only i suffered huge losses due to flashing rc2 over stock rom..
nd by losses i mean
camera dont work fine
fm not working "force close"
facebook not working "essential for me"
and also there are so many system issues as rc2 and stock rom are diffrently build try first rc1 and then upgrade to rc2
hmn.. i tried Cherry Mobile Magnum HD now, still the same, i deleted the stock Camera from root n installed camera360, still cant use, anyone hv stock camera.apk??
Same Here, can somebody help us
Camera suddenly stopped working tried Camera zoom fx, camera 360 etc
Using MIUI
tarunongo said:
Same Here, can somebody help us
Camera suddenly stopped working tried Camera zoom fx, camera 360 etc
Using MIUI
Click to expand...
Click to collapse
if it is MIUI,try freezing Google Talk as in the previous version. I got mine working after doing the same.
I face the same problem camera crashed when i tried to turn the front one on then right after no any camera app can open it and not responding, forceclose all the time. I use ROM CM7.1.0 by Napstar. Help me fix this pls.
Sent from my CSL-MI410 using XDA App
Why Dont You Try Reflashing Stock ROM
pittms said:
I face the same problem camera crashed when i tried to turn the front one on then right after no any camera app can open it and not responding, forceclose all the time. I use ROM CM7.1.0 by Napstar. Help me fix this pls.
Sent from my CSL-MI410 using XDA App
Click to expand...
Click to collapse
It's probably the kernel problem. Just like mine, but I'm using MIUI, MIUI kernel 1.9.30 has the same bug, the latest kernel (1.10.21) fix the camera and work again.
Just like deatbearer said, you've to flash stock ROM or Andro-ID RC2 or MIUI 1.10.21.
Thought a lot about purchasing this mobile as it known having issues with camera, however decided to get it.
Got this phone few hours back, verified at the spice outlet whether camera is working or not, was working there.. Back to office and camera got frozen, showing black screen...
In the mean time, was playing with screen (live wallpapers) and suddenly camera application got invoked (not sure how) & working fine - able to take snaps ... again after 30 mins..i tried camera and again it start showing black screen....
Upgraded to gingerbread from spice site... and camera is good now... not sure how to fix the camera if goes black again & i didn't do anything earlier to fix it... it was all by itself switching to cooperative & non-cooperative modes ...
hi i m using mi 410 my camera quality is bad, how to improve camera quality and how to change icons? i tried change icon many time but not changed....
CacingKalung said:
It's probably the kernel problem. Just like mine, but I'm using MIUI, MIUI kernel 1.9.30 has the same bug, the latest kernel (1.10.21) fix the camera and work again.
Just like deatbearer said, you've to flash stock ROM or Andro-ID RC2 or MIUI 1.10.21.
Click to expand...
Click to collapse
Thank you very much for the advice. But where can I download the kernel or do you have the link to download. One more thing, besides kernel update do I have to flash stock ROM too and how to flash it? Sorry I'm not so good at this. So beginner I am. Thank you very much.
Sent from my Triumph using XDA App
pittms said:
Thank you very much for the advice. But where can I download the kernel or do you have the link to download. One more thing, besides kernel update do I have to flash stock ROM too and how to flash it? Sorry I'm not so good at this. So beginner I am. Thank you very much.
Sent from my Triumph using XDA App
Click to expand...
Click to collapse
Yes, I think you have to flash that ROM. Just like you flash your CM7, use Andro-ID RC2.
was getting a lot of camera problems on stock firmware,
so flashed it with RC2... never had the problem again
Was working Fine on MIUI too
now using CM7 Still Working