Database Develop

[Q] Need Help ASAP

My g1 isnt working with win 7.. I connected it but windows doesnt seems recognizing it...i installed android SDK manager, usb drivers from it but nothing happening....
any suggestion???

What isn't working? Are you trying to access sd card or ADB into the phone?
SD card: make sure to enable USB drive mode on you phone.
ADB: Set-up your SDK per numerous guides here on XDA or elsewhere. Download PDAnet to your computer, it will install required drivers (seems to be the best way around it). Make sure to enable USB degugging under development settings on your phone.
Good luck.

yup im tryin to access memory card but win 7 doesnt seem to recognize my fone, nothing happen when i connect my fone through USB...
n ya i enabled USB debugging but it dint work either...\and there is no Mount Option showing in fone either....

So there's nothing in the notifications saying "USB connected, Select to copy files to/from your computer?" Sounds like a bad cable/port/card to be honest.
I recently upgraded to W7 and it detected my phone and installed drivers automatically.

Anyone can answer me:X1 boot Andriod usb connect to PC no driver???

Anyone can answer me:X1 boot Andriod usb connect to PC no driver??? I use Andriod PC display need install XDA dirvers? Anyone can share me this driver.tks.

As far as I know the drivers will still be in git tree for the kernel, and they were turned off in builds for some reason around May 2010.
Even if they were removed you can recover them by going to the correct time in git and checking out that branch.
http://gitorious.org/+kovsky-linux-msm/linux-on-qualcomm-s-msm/linux-msm-xdadev or a number of other branches.
I assume you want a USB TCP/IP network, this was working under Linux to Linux. I did not succeed in Linux to Android, but that does not say it cannot be done.

use Linux/Ubuntu OS - No Problems with USB ))) or u can run VMWare and run port of linux and usb will work too

You must use the SDK-Windows Drivers..
You can install from the Android SDK (you must select-> USB DRIVER).
regards,

we nbeed assistent for android my friend i find him but he is on chinese here is link try to use him that we need i hope that i help http://www.incredibleforum.com/foru...suite-windows-android-management-console.html

use DroidCommander
Upload/download file without cable (local wifi) and see logcat output via wifi too, download from capdroid.com

http://forum.xda-developers.com/showthread.php?t=924763

[Q] Can'T connect HTC Vogue to my PC

I try to connect my HTC Touch with my PC; windows 7 x64 but nothing happen
computer doesn't see the phone. Tried in recovery mode but doesn't connect. always loop with something like:
"usb: set adresse 2"
"android_usb gadget: full speed config #1: android"
etc
any help would be appreciate.
Since I do not have phone plan and want to use it as a personal agenda I really need to be able to sync it with my pc
thanks alot

Did you flash this phone to a newer kernel? If I recall, the .32 version kernels do not allow USB connectivity as of yet. You'd have to go back to a .25 kernel (and update the modules after flashing) in order to get USB working again.
Good luck!

hmmm sorry i'm a noob but...
do you mean the "windows kernel" or linux one? (android)
I use the step by step guide to install android (http://forum.xda-developers.com/showthread.php?t=636024)
I made this update too: http://www.htc.com/ca/support/touch-telus/downloads/
thanks for your help

Android.
Your .32 kernel will allow you to connect to a Linux PC, though, I connect mine to a 64-bit Ubuntu machine regularly to add music files.

Ok it work now with another NBH file...

ok, it work only in Recovery Mode
and since I wanna sync my outlook with Jorte I need to get USB in Android
BTW My astro doesn't work? Like if it was a demo.

i want my phone to connect to pc again! plz help (problem shows after root)

hi
first i most apologize for my bad english
i got a htc tattoo and i tried to upgrade it's rom to one of cyanogen's rom.
it has android 1.6 (original rom)
first i must root the device (by the instruction of the cyanogen team in their wiki)
i do some steps and near the end i dont know what happend ( i was coping the commands of adb to cmd)
then it completed or not i pluged out phone
after that each time i connct the usb to phone it just charge and no connecting to pc (i have windows 7)
i dont know what to do and i need to upgrade the rom
if someone knows what i must do tell me please
i am so new in android and i dont know nearly anything
tnx for ur help

i must also add this
on the starting of pc (turning on) if the phone is connected i see the options for htc sync and removable storage ... but after loading windows it goes away and the phone just charges;
i tried one another pc but ther was no connecting

Turn on Mass storage

george.baskharon said:
Turn on Mass storage
Click to expand...
Click to collapse
i did this but not working
i even did hard reset to phone

Hi AEZ_BEST,
if i have understood well you actually have a stock rom (may be rooted) and htc_sync package installed on pc.
OK, trying this:
go there http://forum.xda-developers.com/showthread.php?t=950759 and download new version of 1-click root for tattoo (which occasionally you can use to easily root tattoo and install CWM recovery):
decompress dowloaded package into c:\rtatto folder
set tattoo to use ADB (android debug bridge) instead of mounting as a removable drive, it's possible but i not remember where the option is (sorry but two years and half that i not have stock rom installed ) and connect tattoo to pc [maybe it ask for ABD when you connect]
open cmd as administrator and issue these two commands
Code:
cd c:\rtatto
adb devices
it should reports you the list of attached devices
if your tattoo is in the list you can lately use adb to push the rom you wanna flash on sdcard.
Ops, i don't know if you have yet installed CWM recovery, if not look here: http://forum.xda-developers.com/showpost.php?p=27174485&postcount=129
bye
yen

_yen_ said:
Hi AEZ_BEST,
if i have understood well you actually have a stock rom (may be rooted) and htc_sync package installed on pc.
OK, trying this:
go there http://forum.xda-developers.com/showthread.php?t=950759 and download new version of 1-click root for tattoo (which occasionally you can use to easily root tattoo and install CWM recovery):
decompress dowloaded package into c:\rtatto folder
set tattoo to use ADB (android debug bridge) instead of mounting as a removable drive, it's possible but i not remember where the option is (sorry but two years and half that i not have stock rom installed ) and connect tattoo to pc [maybe it ask for ABD when you connect]
open cmd as administrator and issue these two commands
Code:
cd c:\rtatto
adb devices
it should reports you the list of attached devices
if your tattoo is in the list you can lately use adb to push the rom you wanna flash on sdcard.
Ops, i don't know if you have yet installed CWM recovery, if not look here: http://forum.xda-developers.com/showpost.php?p=27174485&postcount=129
bye
yen
Click to expand...
Click to collapse
every time i type adb devices in cm i dont get anything. the list is empty. no device attached it says.
and
the adb debgging mode is on.
if i have my phone connected then i can use ur typic (1 click root...)
so iwant to connect my phone first.
plz help

Change your USB cable

Hi AEZ_BEST;
one more try on another PC installing these usb drivers; http://goo.im/tools/drivers/USB_driver_20101122_release.zip
and trying with adb as in my praevious post (btw, when connecting to pc no notification message on tatto at all?)
Edit:
as kemoba say try also with another usb cable, standard mini usb cableshould work too
bye
yen

hi all.
i tried in 2 other pc s . but same resul
finally i reinstalled my windows seven!
then it worked
tnx to all of u

AEZ_BEST said:
hi all.
i tried in 2 other pc s . but same resul
finally i reinstalled my windows seven!
then it worked
tnx to all of u
Click to expand...
Click to collapse
Next time use Ubuntu then
but i use Windows 7 too..never had the problem!

Look on Google play for a 3rd party USB mounter / connecter
Sent from my Desire HD using xda app-developers app

[Q - Solved] File transfer problem between Razr i & WinXP

Hi,
So, I went and bought the Razr I phone, despite the language question was hard to me.
But anyway, now I have other hard issue: How to transfer files between the phone and a WinXp computer, when there is no "Mass storage" option in USB computer connection on the phone.
The "Media device (MTP)" mode seems not to work with XP, but "Camera (PTP)" works. But I can see only DCIM and Pictures folders from the computer.
I'm not sure, where they are even located: on the phones internal memory or on the memory card (there is 8gb micro-sd).
An interesting feature was, that when the phone was connected to Win7 pc in camera-mode, I could see the both memory spaces and all the folders.
Why can't I see the folders on XP? The phone is with the stock ROM (81.5.39001.XT890.Retail.en.GB / Android 4.0.4).
And why there is not "Mass storage"-option despite my old Defy with CM9 and the same Android 4.0.4 version had the option.
Edit. Solution - see post #8

For a long time I didn't use XP but I assume You need to install whole driver pack to see MTP on XP. I suggest to look for mod to enable Mass Storage Mode on Razr I. I saw this mod somewhere here but completely don't remember haw it was named.

I could find only one driver package from Motorola: Motorola Device Manager 2.4.5
But that didn't help. After connecting the phone with USB-cable, my pc recognizes the phone, but then requires a MTP driver.
Weird that no driver-CD did not come with the phone original package.

Chamelleon said:
... I suggest to look for mod to enable Mass Storage Mode on Razr I. I saw this mod somewhere here but completely don't remember haw it was named.
Click to expand...
Click to collapse
i use the "USB Mass Storage Enabler (for Samsung and Sony devices)" from Mohammad Abu-Garbeyyeh.
Dont remember if you need to be rooted but its the only tool i have found thats working for Ri...

5m00v3 said:
i use the "USB Mass Storage Enabler (for Samsung and Sony devices)" from Mohammad Abu-Garbeyyeh.
Dont remember if you need to be rooted but its the only tool i have found thats working for Ri...
Click to expand...
Click to collapse
It is this one http://forum.xda-developers.com/showthread.php?t=2297888. Works really good.
But if you are on 4.0.4 You can find on this forum mod of the framework with USB mass storage enabled.
But you have to be rooted.

Yes, the phone is on stock 4.0.4 version as I have owned it just few days.
The phone suggested an update (91.2.29001.en.GB), but I didn't update. I was happy with CM9 4.0.4 version in my Defy, and same version seems to run smoothly on Razr I too. And by the update, I would possibly loose the FM radio function.
Hopefully the mod on this forum is easily described, I'm a low-level rookie with customizing Android. However is was delightful to install CM9 to my Defy with good instructions on this forum.

PatrikRa said:
Yes, the phone is on stock 4.0.4 version as I have owned it just few days.
The phone suggested an update (91.2.29001.en.GB), but I didn't update. I was happy with CM9 4.0.4 version in my Defy, and same version seems to run smoothly on Razr I too. And by the update, I would possibly loose the FM radio function.
Hopefully the mod on this forum is easily described, I'm a low-level rookie with customizing Android. However is was delightful to install CM9 to my Defy with good instructions on this forum.
Click to expand...
Click to collapse
You can try this one method http://forum.xda-developers.com/showthread.php?t=2005541
or this one http://forum.xda-developers.com/showthread.php?t=2040933
Make a back up at first.

I've just found, that there are some MTP drivers for WinXP:
Media Transfer Protocol Porting Kit and then Windows Media Player 11 (which includes the driver)
Lets see if one of them work first. Otherwise I have to say goodbye to the phones warranty.
Edit. Case solved. I installed Media Player 11 and then selected Motorola USB Composite Device driver in WinXP device manager for the phone.
Now it works, despite not so simply as USB mass storage option did. I'll spare the warranty so far if something comes ahead.
Thanks for help.

Don't worry about warranty. In this days You can root without bootloader unlock and use http://forum.xda-developers.com/showthread.php?t=2297888. Yesterday I tried to download 7GB of movies from my RAZRi card by MTP and when I saw transfer speed around 1MB/s exactly the same as on WiFi I searched some and this is easiest working way for USB Mass Storage.