Hello friends, I write because I'm desperate... Every time I install an alternative keyboard to my nexus, my screen goes crazy.
Yesterday, I installed the gingerbread keyboard, and now my touch is bad, I can not even write a complete sentence each time I resume the display.
I uninstalled the keyboard yesterday and my phone still is bad, Ive tried everything, restoring a nand, wiping, and nothing happens!
any advice? is there anyway to see if the calibration values were changed?
this has happened to me before, once I installed smart keyboard and my touch went wrong too, but it fixed when I uninstalled it and its screen calibration complement too...
Can you be more specific about how exactly the screen goes crazy? If you're referring to screen touches registering in the wrong place it always seems to happen to me when I'm using the keyboard. It occurs frequently when I'm typing a message but strangely never seems to happen when I'm just using the browser.
Perhaps there's a link?
Odd, happened to me too.
I took a very damp cloth and cleaned all the smudges and oils from the screen. That took care of it for me.
donchele said:
Hello friends, I write because I'm desperate... Every time I install an alternative keyboard to my nexus, my screen goes crazy.
Yesterday, I installed the gingerbread keyboard, and now my touch is bad, I can not even write a complete sentence each time I resume the display.
I uninstalled the keyboard yesterday and my phone still is bad, Ive tried everything, restoring a nand, wiping, and nothing happens!
any advice? is there anyway to see if the calibration values were changed?
this has happened to me before, once I installed smart keyboard and my touch went wrong too, but it fixed when I uninstalled it and its screen calibration complement too...
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=dsSUqkh8pcI
it's a known issue with the nexus one. sometimes, it cannot handle 2 points at a time, resulting in "touch point smearing" (see vid). you can imagine how annoying it would be to type on a virtual keyboard! it doesn't matter in a browser since touch point smearing still results in the desired pinch to zoom/expand motion
my advice is to either type in such a way so that only one finger is on the screen at a time; make sure your first finger is off the screen before you press with your second finger.
or, use swype
1 finger swype
Related
So, i'm usually quiet on these forums. Just reading, trying roms, etc. But here is something that has me stumped. Last thursday my phone crapped out. When i woke up and looked at it (it was connected to my laptop/charging) Applications were opening left and right, i couldn't close any of them because stuff kept opening. I tried to soft reboot it and it didn't help. Once it rebooted stuff started opening itself at random again. I ended up pulling the SIM and battery out and leaving it for 5 minutes. When i put it back and powered it up the touch screen no longer worked, but apps weren't opening on their own.
What gives?
I have hard reset (which means it's waiting for me to touch the screen to setup my rom), i have also taken off the screen protector (in case it had something stuck under it. Neither of these things helped. Per the forums I got a new screen, just put it in, and the touch screen doesn't work still... I'm drawing a blank here can anyone give me some advice. Going back to my Prophet for the time being but I HATE not having a keyboard (and it's slower than molasses)
have you tried flashing a new rom via sd?
Check that the screen protector has not moved under the front bezel and keeps pressing your touchscreen.
Robert
I have totally removed the screen protector and even replaced the screen for that matter so I dont think that's it. I haven't tried flashing a new rom. I just found it odd that this has worked for so long and now I get what appears to be hardware problems. As for flashing Via SD memory, is that better than doing it via cable for some reason? I'd be willing to give it a go...
Any other suggestions?
fiddelm3742 said:
I have totally removed the screen protector and even replaced the screen for that matter so I dont think that's it. I haven't tried flashing a new rom. I just found it odd that this has worked for so long and now I get what appears to be hardware problems. As for flashing Via SD memory, is that better than doing it via cable for some reason? I'd be willing to give it a go...
Click to expand...
Click to collapse
Similar problem happened to my Kaiser phone, although no multiple files opened, the phone just won't react to any touching, not stylus pen either. So I first soft reset, then hard reset, none of them works, now the phone can Sync alright, but the screen just stands on the Window Mobile screen, saying "Tap the screen to set up your window mobile device"
I only have this new phone for <3 weeks.
I went to HTC site, want to download a latest ROM file from them, after typing in the S/N, it won't let me, saying that ROM is not suitable for my phone.
So now I am download ROM file from this site, will choose one to flash the phone, see whether it works.
I will call HTC tech support tomorrow after Thanksgiving, see what they suggest
Hope some gurus here can also make some suggestion, Thanks!
Well I replaced the LCD and the new LCD works great, but the screen still doesn't respond to touches. What gives?! I hard reset and I got past the windows screen alignment thing by creating a welcome.not file but it's still pretty much worthless w/o a touch screen. Anyone have any suggestions?
Whoa, i thought something odd was going on. Never mind i got entirely the wrong idea.
Ha, not the case.
Anyone know if a flex cable would fix my issue? I dont really know what the felx cable is for but i've seen posts about people replacing them w/ LCD problems. I don't know if it is touch screen related or not, and i'm kind of tired of buying parts that don't fix my problem
please just flash a new rom whch ever you want (for some reason i thought you said that it keeps restarting your device because if that was the case the only option you would have was to flash via sd as activesync would load long enough for you to get a connection to flash from the computer)..trust me just try it..what have you got to lose
I reflashed one yesterday actually. The newest HyperDragon (which is looks like a new one is available today) It wasn't rebooting but initially windows were popping open left and right so i restarted it a couple of times(which i first had the problem, not yesterday) Yesterday it worked like any normal rom w/o the ability to touch. Anywho, after the flash of a different rom. No luck. I'm thinking it's a hardware problem of some sort but as i've already replaced the LCD i have no idea what?
yah thats sounds funky..you can bring it in for a warranty exchange either at a local DSC or over the phone (that is if your with att) and if not call HTC..all devcies come with a 16 or 18 month warranty
Well I called ATT yesterday, apparently I purchased the phone On Oct 17th 2007 which means It's out of warranty (apparently it has a 12 month warranty?) So it sounds like I'm SOL. So, i guess I'm off to ebay to try and fine a phone that I can canibalize to try and get mine going again.
touch screen
this may sound dum but when you replaced the screen did you replace the touch part as this is different from the screen
Well I picked up this
http://www.blackberry8100parts.com/...B3-NEW-HTC-TyTN-II-KAISER-P4550-_p_35-70.html
which includes the digitizer (from what I know it's all one part when they send it to you) The screen has the digitizer built in. So i replaced the part they sent me.
I just stated having this issue. My touchscreen stopped responding to touches over the weekend while the keyboard was extended. I just took the phone apart to make sure everything was connected right & put it back together, & now the touchscreen doesn't work at all. This sucks!
Any news? i'm having the same problem: no response at all, stuck at "Tap the screen to set up Windows Mobile-based device"
An interesting problem with screen
well my tilt fell out of the car holster while using gps and i suspect the screen hit my gear shift. I didn't notice anything odd after i put the battery back in it (yeah it fell that hard lol). Later that night I went to check mail and noticed something not right. Turns out my screen seems to have been pushed in a bit. Well here's the issues I've noticed so far: All the touch responses seem fine except for 1) the screen alignment doesn't register taps, but otherwise the touchscreen works and 2) on the htc home screen, I can't tap the house icon unless I tap any other icon first.
Initially I thought there was some pressure or deformation right at that particular spot, but it reacts the exact same way in landscape mode. I can't tap the house icon first; I have to tap something else first, then the icon works fine until I open a program or something and go back to the home screen. Then I simply have to tap weather or something and then home.
I'd reflash the rom or do a hard reset, but the screen alignment didn't work when I tried it so I didn't want to get stuck at the "tap your screen to begin" part.
Any ideas or do I just need to buy another screen or maybe just the digitizer. the amount the screen seems recessed is maybe a millimeter at most. Just enough so that I noticed a difference when touching contacts just above the housing. I tried cleaning by using a business card and running between screen and housing. Ohh... and one more thing... when I open the cube and then close it, I get what I refer to a static frazzle for split second and it goes back to normal. That only happened a couple of times after the business card thing. Do you think I just loosened a connection? damn... I still haven't taken it apart yet. Think I need to. Any help appreciated.
If your screen does not work, you can still use your phone. There is an app that you use on your computer that acts as the touch screen. This also works when the screen craps out.
http://www.sparus-software.com/spip.php?page=download&lang=en&ref=at&t=tilt
(EveryWAN Remote Support Personal Edition - Free download)
yeah -- my touchscreen didn't crap out totally, it just got muffed up when I dropped it a bit. Well, i went ahead and installed codefreaks remote screen alignment thing and did a hard reset. Well, the hardreset did the trick w/out the need for anything else. The alignment worked and everything. So, i'm back in business. Everything seems to work properly, except that my screen is still recessed a tad; but, that's not a big deal really.
I got this weird problem... On two Xperias! My first was like this from the beginning, the other started two days ago.
I can't get the screen aligned. i got coordinates from a friends perfectly aligned screen, and it is off, not in the edges, but in the middle. I don't understand what might be wrong. I have aligned my screen 30 times, and flashed the phone two, with two different ROMs, one original UK Xperia, one Blackstone by itje.
If other people got this problem, please make a post here.
Also, if you got "perfect align screen", if you can post your coordinates from the registry here, so I can test them, it would be great!
bump. please, need to find out if other people got this problem
Lol
Looks like nobody does. Do a hard reset on your phone from the Start Menu/Settings and perform the manual align by tapping the screen.
You can't just take settings from another phone and expect them to align because it doesn't work like that, otherwise the alignment wouldnt even be necessary.
Manual align this way and let us know how it goes.
Well, it did work at first. But the day after the middle part of the screen was completely off. But I have tried hard reset, soft reset, installed different ROMs, nothing works.
Sounds weird. Of the digitizer is broken it wouldn't work anywhere correctly. Check your installed programs. Maybe something is messing with your touch-alignment.
Have same issue
do you align using ur finger or ur stylus ??....better the stylus
"i got coordinates from a friends perfectly aligned"
Now that sentence made me think about what you are doing..
just align and follow the instructions? ...
Sorry but... JERK!
I tried to align, but it just looped, as I SAID BEFORE! Please read all posts before saying ANYTHING, because if not, it WON'T help me, or others that might have the same problem.
The coordinates from my friend, which I got from his registry, on the same phone, with same language, probably the same party, worked one day, the next it didn't. I allways align with my stylus, tried with finger, didn't help. got no programs installed, have tried itje's rom, and a vanilla Xperia UK rom, same problem.
In fact, same problem on TWO Xperias, gotten from the same store, same color, but the last from a later party, which my friend got one of too.
This can't be a coincidence... I will deliver my phone to the store, but I need confirmation about the loop from other people here too, because this time, I will get my money back. I can't go half a year without a phone because SE screwed up their deal with HTC, which choose to take cheap crap-plastics and apparently screens instead of the real deal in phones priced 650$++ here in Norway. It just doesn't hold up!
alignment routine looping
i've had the alignment program problem looping issue before and eventually realised that it was because I wasn't tapping the screen hard enough with my stylus. I'm not saying smash the hell out of it but applying a little extra pressure did the trick for me.
As far as loosing the settings and hacking it using a mate's calibration I'm with the others - probably an app you've got installed that's wiping it and using somebody else's cal is pointless!
I tried tapping so hard you get the lcd-effect, the rainbow-effect on the screen. Too hard. And, only prog i got installed is regedit. Only aftermarket I got, so thats no go. Guess the touch-thingy (digitizer?) is screwed then. Well, I want my money back
It will be just a few days till may warranty will be over (1 year warranty) and my silver just got almost dead digitizer today. Sometimes it works sometimes it doesn't since I installed touch response before so it'll vibrate when I touch it. I hard reset my phone since I think it maybe due to a software problem, but now I'm stuck on the align screen. I guess of all the Xperia users on the whole wide world I consider myself to be the "unluckiest".
ok guys and gals, heres one for you. i know im a noob but this one has got me stumped and i cant for the life of me find anything in this or any forum or even google. i have the tilt. just flashed a cooked rom for the first time several weeks ago thanks to everyone on here and all the FAQs and stickies. (to any other noob, all the info is out there!!!!! dont be lazy!!! SEARCH AND READ YOUR HEART OUT!!!!) anyway, im running Witscheys latest 6.5 rom build 23071 HSPL 3.34 w/ radio 1.70.19.09. ive been tweakin it pretty much every day tryin to get it to the way i want.
well im so close to finishing and the the screen suddenly decided to randomly not respond to my touch. the buttons were the only way to control the phone. even after numerous soft resets. then it would decide to start responding. so i was doing some research and tried a couple diff methods of fixing "screen freezes" (but i dont think its a "screen freeze" as it worked fine with the use of the buttons) finally found a post in the thread for the room that read:
Originally Posted by cpala
Hi witschey,
I work with you rom a week a go, but sometimes the device screen freeze.
ugoff
Member
I had that same problem. Need to change the cache settings in Advanced Config. The filesystem cache defaults to 512kb, so I set it to auto and it doesn't freeze anymore. I also turned up the glyph cache to 32kb. Between the two, the phone interface runs fast and smooth.
so i tried that and it still didnt fix it. then i decided to just do a hard reset and install one app a day at a time (all the ones i had before the hard reset) to see if one of them was casing it. well after the hard reset i didnt notice the problem anymore. i was stoked. now all i needed to do was figure out which app was giving me trouble. WELL about 10 min later when i was texting my friends as usuall, my phone recieved a message but the screen was black. so i slid it open (wake on slide) and the screen turned on. replied to my buddy,closed the lid and the screen went black..... WTF? slid it open, screen on. closed, screen black.... and so forth. this is the way it has been since yesterday. even tried two more hard resets with no change.
NOW HERES THE WEIRD PART!!! if i slide it open JUST A LITTLE very slowly, the backlight turns on barely. just enuf to see the today screen but its very very dim. its as if there is a bad connection. but the screen is in portrait mode like it should be. if i open it fast the backlight turns on, screen shows portrait, then switches to landscape like it should. close it, it goes black but i know it switches back cuz the next time i open it, i can see it change again.
EVEN WEIRDER--- if open landscape, get into an app or program such as contacts where i can flick to scroll, ill close the lid, immediately flick the screen, open lid and low and behold my friends are just scrollin by!!!! the damn screen is responsive but there is no backlight!!! so to test i plugged into my laptop, activated mymobiler, and EVERYTHING works like it should when i touch the screen, use the buttons, open close the lid. it all shows up on my laptop. but the damn screen is still black when lid is closed. so i can literally look at my laptop and touch the black screen on my tilt and controll it!! WHY IS THE BACKLIGHT SHUTTING OFF WHEN ITS CLOSED!!!!???
so then i decided to tear the damn phone completely apart about 2 hours ago, check all connections, and clean all the dust. all connections checked out fine, put it back together and still have the problem. i know there is a magnet and sensor that tells the screen when to rotate when the screen is opened or closed but its obviously working cuz it will rotate the screen. my guess was that some kind of registry entry has been changed somehow. but then i realized thats not it because the hard resets didnt fix it. now im thinking hardware...... IM SO SORRY THIS POST IS SOOOOOO LOOOONNNNGGG but i dont know what else to do. phone was working great up until yesterday and i cant have this!!! has anyone had this problem with this or any other device or even know which direction to point me in??? PLEASE HELP!!! thanks in advance for any replies!!! the quicker ther better
I think your flat cable is broken. Doesn't make connection when closed (no backlight), barely connects when opened (backlight on).
So I think you need a new flat cable...
I agree with blueflame... I think it has nothing to do withthe rom flash.. it sounds like your ribbon cable is "Starting" to go.. unfortunatly it will only get worse where it wont; read you memory card, and evenutally your Sim card as well (speaking from experiance here).... If you are handy with tools, you can try to but a new one yourself and install it... But there are also some shops aroudnthe world, aswell and some members here who may be able to fix it for you... for a price (and not, I am not one of them)... Sorry for the bad news bud.. but I personally would rather knwo that than hard resettign 100 times and nrto beign able to figure out the problem...
hey. thanks for the fast replies! thats not exactly what i wanted to hear but like Teej said, its better to know than messing around with something else. now by flat cable are you reffering to the biggest ribbon cable inside the phone that connects the screen half of the phone to the keyboard half? Or the connector that comes directly out of the screen itself (meaning i buy a new screen and install and all is well) or is it another cable? but i think those are the only two that have anything to do with the screen other then the one for the sensor/magnet. here is a photo to help point out which ones. i have the manual so i can grab more photos if needed. thanks again for the help so far. good stuff. we are getting somewhere!!
photobucket.com/albums/b145/kewljay223/tilt.jpg
since im not allowed to post outside links yet, type this-----> h-t-t-p-:-/-/-i-1-8-. (minus the dashes between characters) in front of the link in my last post in your address bar to create the ACTUAL LINK and it should take you to the picture.
Hey all, long time reader first time poster regarding troubleshooting. I searched the site and couldn't locate anything regarding this, so I apologize if I fail at research. I have a T-Mobile G1, and the phone very oddly is running perfectly when the keyboard has been exposed but once closed the phone freezes. No touchscreen movement, trackball, camera button, ect; only the power button idles the screen to black. Now at first I got worried but I flipped the keyboard out and it functions perfectly again. I rebooted phone and it is the same case, the G1 start up and rom loading screen will remain frozen unless I slide open keyboard.
Is this a motherboard error? Seeing the touchscreen functions when open I eliminated that, but has this happened to anyone else? Thanks, and sorry for wall of text.
iRidill said:
Hey all, long time reader first time poster regarding troubleshooting. I searched the site and couldn't locate anything regarding this, so I apologize if I fail at research. I have a T-Mobile G1, and the phone very oddly is running perfectly when the keyboard has been exposed but once closed the phone freezes. No touchscreen movement, trackball, camera button, ect; only the power button idles the screen to black. Now at first I got worried but I flipped the keyboard out and it functions perfectly again. I rebooted phone and it is the same case, the G1 start up and rom loading screen will remain frozen unless I slide open keyboard.
Is this a motherboard error? Seeing the touchscreen functions when open I eliminated that, but has this happened to anyone else? Thanks, and sorry for wall of text.
Click to expand...
Click to collapse
Boot into recovery and see if the trackball works in there. If it does, then its simply a firmware issue and a full wipe should fix it. If it's not, then you probably dropped the phone or something and there is probably some sort of cable disconected/brocken inside the phone.
I completed a full wipe and am experiencing the same problems. I take very good care with my phone and was dropped once months back by someone bumping into me. Would it be possible for myself to self serve the phone and make sure all wires are secure? Or is it possibly anything else?
I have the same issue I've taken the phone apart along with many other G1s and have never seen this problem. I used this phone for almost 6 months lent it to a friend for a week and now it does this. So my guess is it's the flex cable between the screen and keyboard or would it have to do with the motherboard do you think?
I'm taking it apart as we speak I'll post what I find.
Did you have any luck, PlatinumMOTO?
Hello, I'm a junior member here, I learned a lot from XDA as I read many threads but only have posted a bit.
My Note5 has been showing touchscreen malfunctions for a while, nowadays I'm using the S-pen. The first time I realized I tried to wipe the cache, and it didn't work. I booted into safe mode but it didn't fix it. I realized it was a hardware related thing. Then I tried to remove the screen protector, it did work, but not much later it happened again. I cleaned my screen and it worked (and start malfunctioning again minutes later).
I concluded that the oil from my finger was the problem, but unlike any other phones I've had, the touch begins to malfunction just because of a very tiny amount of grease build up.
(for example, if there's a small build up on the 'A' key on the keyboard, whenever I touch other areas, the 'A' key will also recieve touch input.)
I think tuning the touch sensitivity will help. So I asked for help here.
Was my conclusion wrong or is there any solution that requires no rooting?
aydanjr said:
Hello, I'm a junior member here, I learned a lot from XDA as I read many threads but only have posted a bit.
My Note5 has been showing touchscreen malfunctions for a while, nowadays I'm using the S-pen. The first time I realized I tried to wipe the cache, and it didn't work. I booted into safe mode but it didn't fix it. I realized it was a hardware related thing. Then I tried to remove the screen protector, it did work, but not much later it happened again. I cleaned my screen and it worked (and start malfunctioning again minutes later).
I concluded that the oil from my finger was the problem, but unlike any other phones I've had, the touch begins to malfunction just because of a very tiny amount of grease build up.
(for example, if there's a small build up on the 'A' key on the keyboard, whenever I touch other areas, the 'A' key will also recieve touch input.)
I think tuning the touch sensitivity will help. So I asked for help here.
Was my conclusion wrong or is there any solution that requires no rooting?
Click to expand...
Click to collapse
Type *#2663# on your phone. And press "TOUCH KEY FW UPDATE".
iminer said:
Type *#2663# on your phone. And press "TOUCH KEY FW UPDATE".
Click to expand...
Click to collapse
Nice, it works! But may I know why did it happen? Perhaps I can prevent it in the future. What happened?
(Update) The screen malfunctioned again. I tried to update the touchscreen firmware again and nothing happened. I was thinking wether flashing a custom kernel and ROM would fix this or not, should I?
Replace the phone, could be the screen or the motherboard. Don't bother fixing it.
cachanilla86 said:
Replace the phone, could be the screen or the motherboard. Don't bother fixing it.
Click to expand...
Click to collapse
The weird part is it does work perfectly sometimes but most other time, it doesn't. I'm going to do a factory reset tonight to see if it works or not, or to decide wether I should flash a new ROM or not.
In my place here, a nearby retail store is willing to buy my Note5 for around $130, pretty sad to know. I love the S-pen but can't afford the Note 9 nor the Note 8. Should I buy a Samsung tablet with an S-pen instead?(it's currently on 25% discount).
Update: Is it a coincidence if the touch is problematic during heavy task (e.g. multitasking, running demanding apps, or playing games) and working fine during standby or light tasks?