ok guys and gals, heres one for you. i know im a noob but this one has got me stumped and i cant for the life of me find anything in this or any forum or even google. i have the tilt. just flashed a cooked rom for the first time several weeks ago thanks to everyone on here and all the FAQs and stickies. (to any other noob, all the info is out there!!!!! dont be lazy!!! SEARCH AND READ YOUR HEART OUT!!!!) anyway, im running Witscheys latest 6.5 rom build 23071 HSPL 3.34 w/ radio 1.70.19.09. ive been tweakin it pretty much every day tryin to get it to the way i want.
well im so close to finishing and the the screen suddenly decided to randomly not respond to my touch. the buttons were the only way to control the phone. even after numerous soft resets. then it would decide to start responding. so i was doing some research and tried a couple diff methods of fixing "screen freezes" (but i dont think its a "screen freeze" as it worked fine with the use of the buttons) finally found a post in the thread for the room that read:
Originally Posted by cpala
Hi witschey,
I work with you rom a week a go, but sometimes the device screen freeze.
ugoff
Member
I had that same problem. Need to change the cache settings in Advanced Config. The filesystem cache defaults to 512kb, so I set it to auto and it doesn't freeze anymore. I also turned up the glyph cache to 32kb. Between the two, the phone interface runs fast and smooth.
so i tried that and it still didnt fix it. then i decided to just do a hard reset and install one app a day at a time (all the ones i had before the hard reset) to see if one of them was casing it. well after the hard reset i didnt notice the problem anymore. i was stoked. now all i needed to do was figure out which app was giving me trouble. WELL about 10 min later when i was texting my friends as usuall, my phone recieved a message but the screen was black. so i slid it open (wake on slide) and the screen turned on. replied to my buddy,closed the lid and the screen went black..... WTF? slid it open, screen on. closed, screen black.... and so forth. this is the way it has been since yesterday. even tried two more hard resets with no change.
NOW HERES THE WEIRD PART!!! if i slide it open JUST A LITTLE very slowly, the backlight turns on barely. just enuf to see the today screen but its very very dim. its as if there is a bad connection. but the screen is in portrait mode like it should be. if i open it fast the backlight turns on, screen shows portrait, then switches to landscape like it should. close it, it goes black but i know it switches back cuz the next time i open it, i can see it change again.
EVEN WEIRDER--- if open landscape, get into an app or program such as contacts where i can flick to scroll, ill close the lid, immediately flick the screen, open lid and low and behold my friends are just scrollin by!!!! the damn screen is responsive but there is no backlight!!! so to test i plugged into my laptop, activated mymobiler, and EVERYTHING works like it should when i touch the screen, use the buttons, open close the lid. it all shows up on my laptop. but the damn screen is still black when lid is closed. so i can literally look at my laptop and touch the black screen on my tilt and controll it!! WHY IS THE BACKLIGHT SHUTTING OFF WHEN ITS CLOSED!!!!???
so then i decided to tear the damn phone completely apart about 2 hours ago, check all connections, and clean all the dust. all connections checked out fine, put it back together and still have the problem. i know there is a magnet and sensor that tells the screen when to rotate when the screen is opened or closed but its obviously working cuz it will rotate the screen. my guess was that some kind of registry entry has been changed somehow. but then i realized thats not it because the hard resets didnt fix it. now im thinking hardware...... IM SO SORRY THIS POST IS SOOOOOO LOOOONNNNGGG but i dont know what else to do. phone was working great up until yesterday and i cant have this!!! has anyone had this problem with this or any other device or even know which direction to point me in??? PLEASE HELP!!! thanks in advance for any replies!!! the quicker ther better
I think your flat cable is broken. Doesn't make connection when closed (no backlight), barely connects when opened (backlight on).
So I think you need a new flat cable...
I agree with blueflame... I think it has nothing to do withthe rom flash.. it sounds like your ribbon cable is "Starting" to go.. unfortunatly it will only get worse where it wont; read you memory card, and evenutally your Sim card as well (speaking from experiance here).... If you are handy with tools, you can try to but a new one yourself and install it... But there are also some shops aroudnthe world, aswell and some members here who may be able to fix it for you... for a price (and not, I am not one of them)... Sorry for the bad news bud.. but I personally would rather knwo that than hard resettign 100 times and nrto beign able to figure out the problem...
hey. thanks for the fast replies! thats not exactly what i wanted to hear but like Teej said, its better to know than messing around with something else. now by flat cable are you reffering to the biggest ribbon cable inside the phone that connects the screen half of the phone to the keyboard half? Or the connector that comes directly out of the screen itself (meaning i buy a new screen and install and all is well) or is it another cable? but i think those are the only two that have anything to do with the screen other then the one for the sensor/magnet. here is a photo to help point out which ones. i have the manual so i can grab more photos if needed. thanks again for the help so far. good stuff. we are getting somewhere!!
photobucket.com/albums/b145/kewljay223/tilt.jpg
since im not allowed to post outside links yet, type this-----> h-t-t-p-:-/-/-i-1-8-. (minus the dashes between characters) in front of the link in my last post in your address bar to create the ACTUAL LINK and it should take you to the picture.
Related
i just recently bought my xda2s and it worked fine for a week though. now, from time to time my screen would be "untouchable". literally i cannot click anything or open anything even if i soft-reset it for 10x. buttons seem to work fine but the screen does not. it happened twice while my bluetooth was "on" and i thought maybe it was the bluetooth but recently the same thing happened with my bluetooth now turned "off". i have to wait for hours before it would return to normal again. Anybody help please? By the way, my bluetooth version is 1.0.0 build 3500.
I had a similar problem on my Samsung SPH-i700 PocketPC Phone through Verizon Wireless. Even after a hard reset, I couldn't get past the screen calibration, until I found out that a piece of hair and debris found on the outer edge of the screen right under the lip of the cover was interfering with the touch portion of the display. Apparently, the touch sensors extend past the visible area of the screen, so with both a little aircan and vacuum cleaning, the debris was picked up and the touch screen functioned normally again.
Is this a consistent and/or intermittent problem? Did a hard reset resolve anything?
look for the alignment
Do you have Calligragher 7.4 installed? I read about this in Tekguru website that if you re-install 7.3, the problem goes away. That is what I have done and it seems to be working for me so far (2 days test).
i've checked out my screen and i dont see any dirt or something... i even have a screen protector... dont know if that might cause the problem. Same thing happened last night but this time it was just for a short period of time then it went back to normal... I didn't try a hard reset cause i dont want to loose some of my files but if ever it happened again, i might try doing a hard reset and see what happens... right now, im having my xda2s checked if maybe it's a factory defect or something...
regarding the caligrapher program thing, i dont have that...
Hey, i have the exact same problem I bought mine here in Toronto, from an Asian dealer, its the O2 XDA IIs asia-pacific model.
Same problem, screen(touch screen) goes dead like no responses to any touches, for like half hour - 2hour once in a day or something and nothing cures it, hard soft rest nothing. just with time it suddenly starts working and the Handheld is useless until then...well i dont see any cure and this is the only place i have heard about someone else having this issue, i will take it back to the dealer, in hopes of exchanging.
any feedback will be will be appreciated
overclock it for a few days..that fixed mine..dont know how but it did.
There is a tread in blue angel about screen aliment that you might like to read. seems 4k of devices went out with screen problems.
What is overclock it. Fairly new to this. Mine just keeps trying to allign and thats all it does it doesnt go into boot mode just allign screen all the time
So, i'm usually quiet on these forums. Just reading, trying roms, etc. But here is something that has me stumped. Last thursday my phone crapped out. When i woke up and looked at it (it was connected to my laptop/charging) Applications were opening left and right, i couldn't close any of them because stuff kept opening. I tried to soft reboot it and it didn't help. Once it rebooted stuff started opening itself at random again. I ended up pulling the SIM and battery out and leaving it for 5 minutes. When i put it back and powered it up the touch screen no longer worked, but apps weren't opening on their own.
What gives?
I have hard reset (which means it's waiting for me to touch the screen to setup my rom), i have also taken off the screen protector (in case it had something stuck under it. Neither of these things helped. Per the forums I got a new screen, just put it in, and the touch screen doesn't work still... I'm drawing a blank here can anyone give me some advice. Going back to my Prophet for the time being but I HATE not having a keyboard (and it's slower than molasses)
have you tried flashing a new rom via sd?
Check that the screen protector has not moved under the front bezel and keeps pressing your touchscreen.
Robert
I have totally removed the screen protector and even replaced the screen for that matter so I dont think that's it. I haven't tried flashing a new rom. I just found it odd that this has worked for so long and now I get what appears to be hardware problems. As for flashing Via SD memory, is that better than doing it via cable for some reason? I'd be willing to give it a go...
Any other suggestions?
fiddelm3742 said:
I have totally removed the screen protector and even replaced the screen for that matter so I dont think that's it. I haven't tried flashing a new rom. I just found it odd that this has worked for so long and now I get what appears to be hardware problems. As for flashing Via SD memory, is that better than doing it via cable for some reason? I'd be willing to give it a go...
Click to expand...
Click to collapse
Similar problem happened to my Kaiser phone, although no multiple files opened, the phone just won't react to any touching, not stylus pen either. So I first soft reset, then hard reset, none of them works, now the phone can Sync alright, but the screen just stands on the Window Mobile screen, saying "Tap the screen to set up your window mobile device"
I only have this new phone for <3 weeks.
I went to HTC site, want to download a latest ROM file from them, after typing in the S/N, it won't let me, saying that ROM is not suitable for my phone.
So now I am download ROM file from this site, will choose one to flash the phone, see whether it works.
I will call HTC tech support tomorrow after Thanksgiving, see what they suggest
Hope some gurus here can also make some suggestion, Thanks!
Well I replaced the LCD and the new LCD works great, but the screen still doesn't respond to touches. What gives?! I hard reset and I got past the windows screen alignment thing by creating a welcome.not file but it's still pretty much worthless w/o a touch screen. Anyone have any suggestions?
Whoa, i thought something odd was going on. Never mind i got entirely the wrong idea.
Ha, not the case.
Anyone know if a flex cable would fix my issue? I dont really know what the felx cable is for but i've seen posts about people replacing them w/ LCD problems. I don't know if it is touch screen related or not, and i'm kind of tired of buying parts that don't fix my problem
please just flash a new rom whch ever you want (for some reason i thought you said that it keeps restarting your device because if that was the case the only option you would have was to flash via sd as activesync would load long enough for you to get a connection to flash from the computer)..trust me just try it..what have you got to lose
I reflashed one yesterday actually. The newest HyperDragon (which is looks like a new one is available today) It wasn't rebooting but initially windows were popping open left and right so i restarted it a couple of times(which i first had the problem, not yesterday) Yesterday it worked like any normal rom w/o the ability to touch. Anywho, after the flash of a different rom. No luck. I'm thinking it's a hardware problem of some sort but as i've already replaced the LCD i have no idea what?
yah thats sounds funky..you can bring it in for a warranty exchange either at a local DSC or over the phone (that is if your with att) and if not call HTC..all devcies come with a 16 or 18 month warranty
Well I called ATT yesterday, apparently I purchased the phone On Oct 17th 2007 which means It's out of warranty (apparently it has a 12 month warranty?) So it sounds like I'm SOL. So, i guess I'm off to ebay to try and fine a phone that I can canibalize to try and get mine going again.
touch screen
this may sound dum but when you replaced the screen did you replace the touch part as this is different from the screen
Well I picked up this
http://www.blackberry8100parts.com/...B3-NEW-HTC-TyTN-II-KAISER-P4550-_p_35-70.html
which includes the digitizer (from what I know it's all one part when they send it to you) The screen has the digitizer built in. So i replaced the part they sent me.
I just stated having this issue. My touchscreen stopped responding to touches over the weekend while the keyboard was extended. I just took the phone apart to make sure everything was connected right & put it back together, & now the touchscreen doesn't work at all. This sucks!
Any news? i'm having the same problem: no response at all, stuck at "Tap the screen to set up Windows Mobile-based device"
An interesting problem with screen
well my tilt fell out of the car holster while using gps and i suspect the screen hit my gear shift. I didn't notice anything odd after i put the battery back in it (yeah it fell that hard lol). Later that night I went to check mail and noticed something not right. Turns out my screen seems to have been pushed in a bit. Well here's the issues I've noticed so far: All the touch responses seem fine except for 1) the screen alignment doesn't register taps, but otherwise the touchscreen works and 2) on the htc home screen, I can't tap the house icon unless I tap any other icon first.
Initially I thought there was some pressure or deformation right at that particular spot, but it reacts the exact same way in landscape mode. I can't tap the house icon first; I have to tap something else first, then the icon works fine until I open a program or something and go back to the home screen. Then I simply have to tap weather or something and then home.
I'd reflash the rom or do a hard reset, but the screen alignment didn't work when I tried it so I didn't want to get stuck at the "tap your screen to begin" part.
Any ideas or do I just need to buy another screen or maybe just the digitizer. the amount the screen seems recessed is maybe a millimeter at most. Just enough so that I noticed a difference when touching contacts just above the housing. I tried cleaning by using a business card and running between screen and housing. Ohh... and one more thing... when I open the cube and then close it, I get what I refer to a static frazzle for split second and it goes back to normal. That only happened a couple of times after the business card thing. Do you think I just loosened a connection? damn... I still haven't taken it apart yet. Think I need to. Any help appreciated.
If your screen does not work, you can still use your phone. There is an app that you use on your computer that acts as the touch screen. This also works when the screen craps out.
http://www.sparus-software.com/spip.php?page=download&lang=en&ref=at&t=tilt
(EveryWAN Remote Support Personal Edition - Free download)
yeah -- my touchscreen didn't crap out totally, it just got muffed up when I dropped it a bit. Well, i went ahead and installed codefreaks remote screen alignment thing and did a hard reset. Well, the hardreset did the trick w/out the need for anything else. The alignment worked and everything. So, i'm back in business. Everything seems to work properly, except that my screen is still recessed a tad; but, that's not a big deal really.
i tried searching for this but no success so i decide to start a new thread.
i was importing pictures to my diamond as usual, and when i disconected i checked out my pictures and they where upside down :/
and i was sceptical and thought it was a little glitch or something so i reboot my phone. then checked it out again but no cigar. i even went into the teeter game and the ball just goes the top even though it does go side to side, it does not go off the top. I even tried the G-sensor calibrator and no success either. I even did a hard reset just a few seconds ago and still nothing, this is making me sorta mad/sad
now i have no idea what to do, second before this it was working perfect and I didn't do anything but plug it to the computer, import pictures and then disconnect it.
any ideas on what this might be?
any feedback would be appreciated, thanks
aaah man check it out!
so i was sooo pissed off and about to cry, cuz of my diamond accelorometer not working, but guess what?
after a hard reset (which didn't do anything but erase all my programs and things i have to put back in). took of the battery and waited a minute but still nothing. but then, I, in a moment of desperation went to the G-Sensor Calibrator thingy and hit my diamond (a few love taps) and it was sorta working now!!! i just had to calibrate it! WTF!!!???
sorry for a waste of a thread but i guess if anyone else has this problem in the near future, instead of reseting everything in a fit like i did, just go into the Calibrator and give it a few love taps in the direction you need it to go. and see if the bubble goes where it needs too and then calibrate it back to original.
i guess violence and technology sometimes do go togethere
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.
So its been about a year and half since I received this phone for my birthday, and from this moment on, I am 90% sure that these companies design these phones to fall apart after a while so you buy a new one.
Please to not be intimidated by the length of the problems, I really doent want to waste a $600 nice phone. Please help.....
List of problems:
So on one random day, while I was using my phone with EnergyROM sense 6.1 (Not even 6.5 (Windows 6.5.5)) the phone stopped rotating when I flipped the keyboard, as in the screen will not rotate when I try to use the keyboard. The touch screen also becomes uncalibrated, and even when I recalibrate it, it still acts very funky (have to click lower than button or higher, depending on its mood). I did absolutely nothing different with my phone that day, but I did not call my phone dead right away, so I decided to update the ROM with the latest sense 6.5 ROM to see if the OS is corrupt or over-cached. This did not fix the problem.
Also, another very weird thing is the phone's screen will illuminate (I guess backlight), but no picture will show when turned on after sleep mode, and I have to click the top button again to sleep and awake it to get a picture. When flipped, the screen doesn't even fully illuminate, and literally dies down to a black screen (half of the pixels are bright, and then it just fails).
Any help would be very appreciated. What I am thinking of is wiping the phone 100%, and not even leaving a rom on it. I heard there is a command that deletes the junk off your phone from a previous ROM to your updated ROM is clutter free. Any other suggestions?
Edit: I hard reset my phone, and nothing is fixed; I still cannot flip screen into landscape mode.
The "command" you are talking about is called "task 29", look for it in the ROM section.
It sounds like hardware problems, i've had mine for about 1 year and a half as well and no problems besides a couple of scratches.
The flex cable connecting LCD and board might be out of order.... I had the same issue.
palmwangja said:
The flex cable connecting LCD and board might be out of order.... I had the same issue.
Click to expand...
Click to collapse
Yeah I heard about that problem. I will first task 29 it, but are there any guides to take apart and fix the flex cable, or even just unplugging it and plugging it back in?
Also, what did you do with your broken phone? Did you buy a new one or get it fixed?
Thanks for the feed back both of you.
my X1 also aged same as yours and it still runs flawlessly now. so it might depends on how you used and keep it
as for the "wiping off the phone" its called task 29, and is encouraged to do before you flash a new ROM, have you did it before flashing energyROM?
rhadrio said:
my X1 also aged same as yours and it still runs flawlessly now. so it might depends on how you used and keep it
as for the "wiping off the phone" its called task 29, and is encouraged to do before you flash a new ROM, have you did it before flashing energyROM?
Click to expand...
Click to collapse
No, but I just did now, but it seems to be a hardware problem because nothing seems to be working properly still. This is some serious BS because I am very over protected with this phone, just to prevent stuff like this to happen. I have never dropped it ONCE, and it seemed to just wear out by itself. The lenses covering the camera is cracked also, and the screen is all screwed up, and I didnt do absolutely nothing abusive to it, I am 110% sure of this.
Any suggestions on how to fix hardware/ ribbon connected to the screen problem?
Order a new cable and replace it.
If you search on Youtube for the video on how to disassemble x1 there is a complete guide that shows you. Its pretty easy and all you need to do is, take the flex cable out and carefully plug it back in. Then carefully put your X1 back together and hopefully you issue will be fixed. If it still persist, then try and get the flex cable changed.