Related
i just recently bought my xda2s and it worked fine for a week though. now, from time to time my screen would be "untouchable". literally i cannot click anything or open anything even if i soft-reset it for 10x. buttons seem to work fine but the screen does not. it happened twice while my bluetooth was "on" and i thought maybe it was the bluetooth but recently the same thing happened with my bluetooth now turned "off". i have to wait for hours before it would return to normal again. Anybody help please? By the way, my bluetooth version is 1.0.0 build 3500.
I had a similar problem on my Samsung SPH-i700 PocketPC Phone through Verizon Wireless. Even after a hard reset, I couldn't get past the screen calibration, until I found out that a piece of hair and debris found on the outer edge of the screen right under the lip of the cover was interfering with the touch portion of the display. Apparently, the touch sensors extend past the visible area of the screen, so with both a little aircan and vacuum cleaning, the debris was picked up and the touch screen functioned normally again.
Is this a consistent and/or intermittent problem? Did a hard reset resolve anything?
look for the alignment
Do you have Calligragher 7.4 installed? I read about this in Tekguru website that if you re-install 7.3, the problem goes away. That is what I have done and it seems to be working for me so far (2 days test).
i've checked out my screen and i dont see any dirt or something... i even have a screen protector... dont know if that might cause the problem. Same thing happened last night but this time it was just for a short period of time then it went back to normal... I didn't try a hard reset cause i dont want to loose some of my files but if ever it happened again, i might try doing a hard reset and see what happens... right now, im having my xda2s checked if maybe it's a factory defect or something...
regarding the caligrapher program thing, i dont have that...
Hey, i have the exact same problem I bought mine here in Toronto, from an Asian dealer, its the O2 XDA IIs asia-pacific model.
Same problem, screen(touch screen) goes dead like no responses to any touches, for like half hour - 2hour once in a day or something and nothing cures it, hard soft rest nothing. just with time it suddenly starts working and the Handheld is useless until then...well i dont see any cure and this is the only place i have heard about someone else having this issue, i will take it back to the dealer, in hopes of exchanging.
any feedback will be will be appreciated
overclock it for a few days..that fixed mine..dont know how but it did.
There is a tread in blue angel about screen aliment that you might like to read. seems 4k of devices went out with screen problems.
What is overclock it. Fairly new to this. Mine just keeps trying to allign and thats all it does it doesnt go into boot mode just allign screen all the time
from several days ago whem i touch in diamond icons never select the one i touch!!!... It selects the icon on left or right but never the right one....
When i have a phone call i select the green icon and it turns the phone off
What can i do?
I aligned the screen thousands of times, i installed the different calibrators and nothing.
I align screen, it works well for a few seconds and becomes crazy again. I soft reset, a tried everything i remember and always the same.....
Obvious question: Did you Hard Reset?
Try a hard reset.
If that doesnt work then it sounds like the screen is screwed, get the unit swapped.
I've just installed a new rom! I think i have to swapp the unit
The problems are the same. Anything more i can do??
If you just installed a new ROM, did you do a hard reset? To me it sounds as if the calibration for the touch sensor is off. The first thing that you do after a hard reset is calibrate the screen.
So you can try to calibrate the screen, bofore doing the hard-reset.
You can but when you hard reset you just have to do it again
Also, you could check your local optician for any additional problems.
No, but honestly, a hardreset and recalibration should fix the problem. I'm aware that GNes/GSen can give some problems if it thinks it has rotated the screen, but I've never seen that occur outside programs that don't rotate the screen by themselves.
If that doesn't work, Sync it, back it up, whatever you want to do, possibly flash to stock and return it to whereever you bought it/HTC to get it swapped.
thank's everybody... I tried it all and the same. Going to swapp
have the same problem.. it wasn't there before, had the phone for 3 month.. i think it has to do with water under the screen, used it in the rain and then it began to behave this way (due to the big speaker hole maybe?) , it works fine otherwise! Any idea how to fix it? waterdamage? - guarantee or what?
I think it´s wierd if you can´t use it when it´s raining..?
joel78 said:
I think it´s wierd if you can´t use it when it´s raining..?
Click to expand...
Click to collapse
How many phones can be used risk free in rain?
i don't think that's the problem. no water in my phone, rain or other....
i think it started after gsen installed...may be wrong, or else or.....
Very little chance Gsen having anything to do with it. Many people are using that (including me) with no ill effects.
Hmmm, I though I was the only one with this problem. I'm on the second unit now, the first one always do soft reset by itself after every few wake up. Now the alignment always gone off after few minutes of use. I'm waiting for the replacement unit now.
Initially I thought it was because of the ROM update I did, but even after I restore the original ROM, it still happen.
Looks like I'm quite unlucky with the Diamond .
problem solved!!!!
gone to look for assistance.
After 3.30 hours new touch screen and they sad to me new components inside.
For now all good. Till when??....
hope it was the last problem
So its a guarantee issue? - bad components inside?
It still works ok, so i wait to send it away..
till now all ok.
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.
Okay so my optical joystick is going haywire.
I'm assuming there is some dirt stuck in there that is making it go crazy.
Every time I press the start button to wake it up it performs a bunch of weird actions,
like going directly to the call log, and Ive managed to call a bunch of friends by mistake..
Really annoying.
Now I've tried different roms and so on so I know it's a hardware problem,
I guess I might be able to fix it if i crack it open and clean it,
but I'm not too confident doing that.
So instead I've tried to disable the damned pad, since I never use it.
But it won't work.. The setting is turned off...
(As seen in the attachment)
...But it's STILL "working".
(And yes I've rebooted it since applying those settings)
Is there a way to shut this thing down in the registry?
I'm loosing my mind here. T_T
Edit: I'm on Winmo 6.1 btw.
yes there is, mine isn't working too good either, so I turned it off, but when accessing the Media Experience Panel it automatically turns back on.
I searched through the registry and found something out:
Search for everything OJ (short for Optical Joystick). You'll find
hklm\\software\drivers\oj\
Somewhere in there it can be turned off although I don't exactly know any more how I have done it. The only thing I know is that I have searched for OJ in the registry and with that I got my answer. I believe I removed a key. Check it out and before actually changing something don't forget to make a backup of the registry.
I hope you'll get it done.
Thanks man, but it didn't work.
I even went as far as deleting the whole OJ folder along with it's sub folders.
No change whatsoever. T_T
Can it be so damned hard to shut this bastard off?
It's seriously making my phone unusable,
and of course the warranty expired less than a month ago.
Im not completely sure if this has the option to turn it off, but give it a try anyways, its got alot of neat things in it.
http://forum.xda-developers.com/showthread.php?t=440035
Ill search for the advanced version im thinking about.
Sigh, couldn't find a fix for it, so I just took it apart and unplugged the button. And the phone is still alive, yay.
Anyhow, thanks for your help guys!
cc0000 said:
Sigh, couldn't find a fix for it, so I just took it apart and unplugged the button. And the phone is still alive, yay.
Anyhow, thanks for your help guys!
Click to expand...
Click to collapse
I think you can just order a replacement part on the cheap
ok guys and gals, heres one for you. i know im a noob but this one has got me stumped and i cant for the life of me find anything in this or any forum or even google. i have the tilt. just flashed a cooked rom for the first time several weeks ago thanks to everyone on here and all the FAQs and stickies. (to any other noob, all the info is out there!!!!! dont be lazy!!! SEARCH AND READ YOUR HEART OUT!!!!) anyway, im running Witscheys latest 6.5 rom build 23071 HSPL 3.34 w/ radio 1.70.19.09. ive been tweakin it pretty much every day tryin to get it to the way i want.
well im so close to finishing and the the screen suddenly decided to randomly not respond to my touch. the buttons were the only way to control the phone. even after numerous soft resets. then it would decide to start responding. so i was doing some research and tried a couple diff methods of fixing "screen freezes" (but i dont think its a "screen freeze" as it worked fine with the use of the buttons) finally found a post in the thread for the room that read:
Originally Posted by cpala
Hi witschey,
I work with you rom a week a go, but sometimes the device screen freeze.
ugoff
Member
I had that same problem. Need to change the cache settings in Advanced Config. The filesystem cache defaults to 512kb, so I set it to auto and it doesn't freeze anymore. I also turned up the glyph cache to 32kb. Between the two, the phone interface runs fast and smooth.
so i tried that and it still didnt fix it. then i decided to just do a hard reset and install one app a day at a time (all the ones i had before the hard reset) to see if one of them was casing it. well after the hard reset i didnt notice the problem anymore. i was stoked. now all i needed to do was figure out which app was giving me trouble. WELL about 10 min later when i was texting my friends as usuall, my phone recieved a message but the screen was black. so i slid it open (wake on slide) and the screen turned on. replied to my buddy,closed the lid and the screen went black..... WTF? slid it open, screen on. closed, screen black.... and so forth. this is the way it has been since yesterday. even tried two more hard resets with no change.
NOW HERES THE WEIRD PART!!! if i slide it open JUST A LITTLE very slowly, the backlight turns on barely. just enuf to see the today screen but its very very dim. its as if there is a bad connection. but the screen is in portrait mode like it should be. if i open it fast the backlight turns on, screen shows portrait, then switches to landscape like it should. close it, it goes black but i know it switches back cuz the next time i open it, i can see it change again.
EVEN WEIRDER--- if open landscape, get into an app or program such as contacts where i can flick to scroll, ill close the lid, immediately flick the screen, open lid and low and behold my friends are just scrollin by!!!! the damn screen is responsive but there is no backlight!!! so to test i plugged into my laptop, activated mymobiler, and EVERYTHING works like it should when i touch the screen, use the buttons, open close the lid. it all shows up on my laptop. but the damn screen is still black when lid is closed. so i can literally look at my laptop and touch the black screen on my tilt and controll it!! WHY IS THE BACKLIGHT SHUTTING OFF WHEN ITS CLOSED!!!!???
so then i decided to tear the damn phone completely apart about 2 hours ago, check all connections, and clean all the dust. all connections checked out fine, put it back together and still have the problem. i know there is a magnet and sensor that tells the screen when to rotate when the screen is opened or closed but its obviously working cuz it will rotate the screen. my guess was that some kind of registry entry has been changed somehow. but then i realized thats not it because the hard resets didnt fix it. now im thinking hardware...... IM SO SORRY THIS POST IS SOOOOOO LOOOONNNNGGG but i dont know what else to do. phone was working great up until yesterday and i cant have this!!! has anyone had this problem with this or any other device or even know which direction to point me in??? PLEASE HELP!!! thanks in advance for any replies!!! the quicker ther better
I think your flat cable is broken. Doesn't make connection when closed (no backlight), barely connects when opened (backlight on).
So I think you need a new flat cable...
I agree with blueflame... I think it has nothing to do withthe rom flash.. it sounds like your ribbon cable is "Starting" to go.. unfortunatly it will only get worse where it wont; read you memory card, and evenutally your Sim card as well (speaking from experiance here).... If you are handy with tools, you can try to but a new one yourself and install it... But there are also some shops aroudnthe world, aswell and some members here who may be able to fix it for you... for a price (and not, I am not one of them)... Sorry for the bad news bud.. but I personally would rather knwo that than hard resettign 100 times and nrto beign able to figure out the problem...
hey. thanks for the fast replies! thats not exactly what i wanted to hear but like Teej said, its better to know than messing around with something else. now by flat cable are you reffering to the biggest ribbon cable inside the phone that connects the screen half of the phone to the keyboard half? Or the connector that comes directly out of the screen itself (meaning i buy a new screen and install and all is well) or is it another cable? but i think those are the only two that have anything to do with the screen other then the one for the sensor/magnet. here is a photo to help point out which ones. i have the manual so i can grab more photos if needed. thanks again for the help so far. good stuff. we are getting somewhere!!
photobucket.com/albums/b145/kewljay223/tilt.jpg
since im not allowed to post outside links yet, type this-----> h-t-t-p-:-/-/-i-1-8-. (minus the dashes between characters) in front of the link in my last post in your address bar to create the ACTUAL LINK and it should take you to the picture.