Database Develop

accelerometer Problem

i tried searching for this but no success so i decide to start a new thread.
i was importing pictures to my diamond as usual, and when i disconected i checked out my pictures and they where upside down :/
and i was sceptical and thought it was a little glitch or something so i reboot my phone. then checked it out again but no cigar. i even went into the teeter game and the ball just goes the top even though it does go side to side, it does not go off the top. I even tried the G-sensor calibrator and no success either. I even did a hard reset just a few seconds ago and still nothing, this is making me sorta mad/sad
now i have no idea what to do, second before this it was working perfect and I didn't do anything but plug it to the computer, import pictures and then disconnect it.
any ideas on what this might be?
any feedback would be appreciated, thanks

aaah man check it out!
so i was sooo pissed off and about to cry, cuz of my diamond accelorometer not working, but guess what?
after a hard reset (which didn't do anything but erase all my programs and things i have to put back in). took of the battery and waited a minute but still nothing. but then, I, in a moment of desperation went to the G-Sensor Calibrator thingy and hit my diamond (a few love taps) and it was sorta working now!!! i just had to calibrate it! WTF!!!???
sorry for a waste of a thread but i guess if anyone else has this problem in the near future, instead of reseting everything in a fit like i did, just go into the Calibrator and give it a few love taps in the direction you need it to go. and see if the bubble goes where it needs too and then calibrate it back to original.
i guess violence and technology sometimes do go togethere

My buttons don't want to be touched...

Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.

might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..

l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage

and your usb is probably whack

@kaiserII...your usb is whack, haha. that **** made me laugh.

having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.

l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?

Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!

Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will

same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...

I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.

didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...

I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.

Any idea how to fix it??

keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry

For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?

oo wow, i have the same problem. hope theres a fix

adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.

Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.

samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.

Screen-> Fade to White-> Temporarily

From what I've been able to find from searching, I think my Tilt is about to bite the dust, but thougth I'd post the symptoms and see if anyone has any good info.
My screen has been occasionally fading to white. Not sure how else to describe it. It just sort of starts getting white, and within 2-3 seconds will be completely white. It is still working, that is, I can place a call (using MS Voice Command); I can play music.
I have SPB Mobile Shell on it, and a button assigned to go to the home screen. I can press that, and it will go to the home screen and display normally. If it is a hardware problem, I find it interesting that I can go back to the main screen. I suspect it is close to gone.
Any thoughts?
If so, anyone know what it costs to repair, and where to do that?

Sounds like a software thing to me, I hate to say it but try a hard reset. Do you have a 6.5 rom?

I've been thinking of doing a hard reset anyway, My memory is about used up. I'm not quite sure why. Probably should get it cleaned up.
No, I'm not on 6.5. I've been reluctant to make the move. I did some rom updates some time ago, and then the person working it decided to stop. I decided to stay with MFGR based roms after that.

ewingr said:
I've been thinking of doing a hard reset anyway, My memory is about used up. I'm not quite sure why. Probably should get it cleaned up.
No, I'm not on 6.5. I've been reluctant to make the move. I did some rom updates some time ago, and then the person working it decided to stop. I decided to stay with MFGR based roms after that.
Click to expand...
Click to collapse
Good thinking.

Likely NOT software but hardware -- could be the screen is going bad, or perhaps just the ribbon cable than connects the screen is broken or not seated properly.

burtcom said:
Likely NOT software but hardware -- could be the screen is going bad, or perhaps just the ribbon cable than connects the screen is broken or not seated properly.
Click to expand...
Click to collapse
So the hardware problem is just scared of the button he has assigned?
I have SPB Mobile Shell on it, and a button assigned to go to the home screen. I can press that, and it will go to the home screen and display normally.
Click to expand...
Click to collapse
Try putting the phone in the bootloader screen and let it sit there, that should let it go around the software.

Erm, yeah -- I guess that wouldn't be indicative of a hardware problem

Well, I am doing the hard reset. So far, no white.
Hmmm...lordy...I have a lot of stuff I try to put on this phone.
I wonder how much memory, both types, I need to keep available.

Don't put anything on the phone that you REALLY REALLY don't need. This is a taste phase and you need the least amount of BS on there.

Well, I've got most of what I need loaded, and have 61MB storage, and 63MB of Program memory free. Much better than before.
But I am still getting the fade to white occasionally.
I'm thinking hardware.
Anyone know if checking the 'ribbon' cable is user capable thing? I don't see it easily. I'll so some searching in the meantime.
Also, any feedback on cost and where for a new screen? Or do I just trash it when it finally goes?
[EDIT]
I am noticing that it particularly does it when I click the Windows (lower left) hard button on the front. I'm thinking it is related to a problem with that button.

Could be when you press that button you are flexing the cable enough to make it lose connection and go white -- this could be good news -- there are instructions scattered in this forum on how to take the phone apart. I'd recommend doing that and makeing sure the cable is firmly seated -- you should also inspect it for cracks.
Hopefully it's just a loose cable and making sure its in all the way will fix it -- if not you'll have to track down a new one.

Thanks. I'll do some searching for those instructions.
In the meantime, I called HTC just to get their thoughts on repair. First thing they told me was to upgrade the rom to the latest which is 3.57.502.2 .
I haven't been following ROM discussions. I need to check that out too. I wish I had seen or thought of that before I just spent a day with the hard reset/reinstall

did this get resolved?
I have the same issue. was it the ribbon cable?
update. I loaded a stock rom, and this appears to have solved the fade to white

Sorry...beeen away a bit.
I have not resolved the issue. It is intermittent, and hasn't happened for a few days now.
I searched and have found some instructions about taking the screen apart, but have not tackled that yet.
In my case I can't imagine changing roms making any difference, as I've had this rom for many months and it is just recently starting this.
I have found new LCD screens for this for ~ $30. I'm wondering if replacing the screen may be an ultimate solution or, if it is possible/likely that it is somethign else hardware related.
Been busy, and don't have the tools yet, so it may be a bit (or when it goes permanenly white forcing action) before I get any further on this.

It is definitely a hardware issue, my wife's tilt did the same thing, then it went permanent white. I first took it all apart looking for a bad ribbon cable or connection because it had taken a few good falls. But that was not it. So I bought a screen for about 30.00 online and shazam that was it!

Thanks for that info. I was thinking of ordering the screen, but concerned it could be something other than the screen (even though logically it would make sense that it is the screen.)

HELP!! my screen works....but it doesnt....

ok guys and gals, heres one for you. i know im a noob but this one has got me stumped and i cant for the life of me find anything in this or any forum or even google. i have the tilt. just flashed a cooked rom for the first time several weeks ago thanks to everyone on here and all the FAQs and stickies. (to any other noob, all the info is out there!!!!! dont be lazy!!! SEARCH AND READ YOUR HEART OUT!!!!) anyway, im running Witscheys latest 6.5 rom build 23071 HSPL 3.34 w/ radio 1.70.19.09. ive been tweakin it pretty much every day tryin to get it to the way i want.
well im so close to finishing and the the screen suddenly decided to randomly not respond to my touch. the buttons were the only way to control the phone. even after numerous soft resets. then it would decide to start responding. so i was doing some research and tried a couple diff methods of fixing "screen freezes" (but i dont think its a "screen freeze" as it worked fine with the use of the buttons) finally found a post in the thread for the room that read:
Originally Posted by cpala
Hi witschey,
I work with you rom a week a go, but sometimes the device screen freeze.
ugoff
Member
I had that same problem. Need to change the cache settings in Advanced Config. The filesystem cache defaults to 512kb, so I set it to auto and it doesn't freeze anymore. I also turned up the glyph cache to 32kb. Between the two, the phone interface runs fast and smooth.
so i tried that and it still didnt fix it. then i decided to just do a hard reset and install one app a day at a time (all the ones i had before the hard reset) to see if one of them was casing it. well after the hard reset i didnt notice the problem anymore. i was stoked. now all i needed to do was figure out which app was giving me trouble. WELL about 10 min later when i was texting my friends as usuall, my phone recieved a message but the screen was black. so i slid it open (wake on slide) and the screen turned on. replied to my buddy,closed the lid and the screen went black..... WTF? slid it open, screen on. closed, screen black.... and so forth. this is the way it has been since yesterday. even tried two more hard resets with no change.
NOW HERES THE WEIRD PART!!! if i slide it open JUST A LITTLE very slowly, the backlight turns on barely. just enuf to see the today screen but its very very dim. its as if there is a bad connection. but the screen is in portrait mode like it should be. if i open it fast the backlight turns on, screen shows portrait, then switches to landscape like it should. close it, it goes black but i know it switches back cuz the next time i open it, i can see it change again.
EVEN WEIRDER--- if open landscape, get into an app or program such as contacts where i can flick to scroll, ill close the lid, immediately flick the screen, open lid and low and behold my friends are just scrollin by!!!! the damn screen is responsive but there is no backlight!!! so to test i plugged into my laptop, activated mymobiler, and EVERYTHING works like it should when i touch the screen, use the buttons, open close the lid. it all shows up on my laptop. but the damn screen is still black when lid is closed. so i can literally look at my laptop and touch the black screen on my tilt and controll it!! WHY IS THE BACKLIGHT SHUTTING OFF WHEN ITS CLOSED!!!!???
so then i decided to tear the damn phone completely apart about 2 hours ago, check all connections, and clean all the dust. all connections checked out fine, put it back together and still have the problem. i know there is a magnet and sensor that tells the screen when to rotate when the screen is opened or closed but its obviously working cuz it will rotate the screen. my guess was that some kind of registry entry has been changed somehow. but then i realized thats not it because the hard resets didnt fix it. now im thinking hardware...... IM SO SORRY THIS POST IS SOOOOOO LOOOONNNNGGG but i dont know what else to do. phone was working great up until yesterday and i cant have this!!! has anyone had this problem with this or any other device or even know which direction to point me in??? PLEASE HELP!!! thanks in advance for any replies!!! the quicker ther better

I think your flat cable is broken. Doesn't make connection when closed (no backlight), barely connects when opened (backlight on).
So I think you need a new flat cable...

I agree with blueflame... I think it has nothing to do withthe rom flash.. it sounds like your ribbon cable is "Starting" to go.. unfortunatly it will only get worse where it wont; read you memory card, and evenutally your Sim card as well (speaking from experiance here).... If you are handy with tools, you can try to but a new one yourself and install it... But there are also some shops aroudnthe world, aswell and some members here who may be able to fix it for you... for a price (and not, I am not one of them)... Sorry for the bad news bud.. but I personally would rather knwo that than hard resettign 100 times and nrto beign able to figure out the problem...

hey. thanks for the fast replies! thats not exactly what i wanted to hear but like Teej said, its better to know than messing around with something else. now by flat cable are you reffering to the biggest ribbon cable inside the phone that connects the screen half of the phone to the keyboard half? Or the connector that comes directly out of the screen itself (meaning i buy a new screen and install and all is well) or is it another cable? but i think those are the only two that have anything to do with the screen other then the one for the sensor/magnet. here is a photo to help point out which ones. i have the manual so i can grab more photos if needed. thanks again for the help so far. good stuff. we are getting somewhere!!
photobucket.com/albums/b145/kewljay223/tilt.jpg

since im not allowed to post outside links yet, type this-----> h-t-t-p-:-/-/-i-1-8-. (minus the dashes between characters) in front of the link in my last post in your address bar to create the ACTUAL LINK and it should take you to the picture.

HTC Hero CDMA Backlight

Has anyone ever had any issues with the backlight on the Hero?
Lately, sometimes, when I turn my phone on or something, it's as if there is no screen at all. It stays black, eventhough I know that the OS is running. I've even tried rebooting, taking out the battery, etc... I can tell it's booting normally because it does the little vibrate, and then vibrates once the OS is fully loaded, etc... cept, when this is occuring, I cannot see anyting on the screen. If I tilt it just right, I can JUST BARELY see the outline of a window or something (whatever is up on the screen at that time). Then after dealing with this issue for a couple of minutes, and rebooting a few times, it works itself out.
I'm thinking I'm starting to have some type of hardware failure, but really don't want that, because I'm due to upgrade to the EVO here in about a month and don't want a stupid replacement just so I can go buy a new phone a month later, ya know? Anyway, wondered if anyone has had the issue before and what, if anything, they may know to do to fix it.
Thanks guys!

Yes I get the same issue off and on. I think it has to do with CM6 and the brightness settings. Not sure though.

For some reason when I flash CM6 it sets the Automatically Adjust Backlight setting to be off. I figured it was just the nature of the rom, so everytime I flash a new one, I go and turn it on in Display settings.

Kcarpenter said:
For some reason when I flash CM6 it sets the Automatically Adjust Backlight setting to be off. I figured it was just the nature of the rom, so everytime I flash a new one, I go and turn it on in Display settings.
Click to expand...
Click to collapse
No man, I'm saying, even when I first turn on my phone, I dont even see the white HTC screen. It's completely black, but vibrates like normal when I press the power button to initially turn it on. It's fukd I'm pretty sure. I can't see a thing on it, not even in recovery. It's completely black, but vibrates at the correct times it should vibrate (when I first press power button to turn on, when the rom initially boots up, etc...)
I'm thinking my hero is dead....
I only had a little less than a month to go before I could get an EVO too.... damn phone.

Have you done any damage to it? Sprint might replace it for free.

derekwilkinson said:
Have you done any damage to it? Sprint might replace it for free.
Click to expand...
Click to collapse
Nope, I didn't do anything to it... unfortunately, I'm stuck with CM6 installed on it, because I can't see it to be able to switch back to the stock ruu... LoL
so I hope they don't notice and then say, well, too bad, u'r screwed because u rooted u'r phone. But no, my phone is still immaculate except the 'End' key is chipping off (the paint). That's about it
I'm hoping maybe they'll let me just upgrade to the EVO since I'm due in about a month anyway. I doubt it, but even if they give me a replacement (a new one) then I'd be okay with that.

Welp, they ended up replacing my phone with a replacement (refurbed) Hero... I pretty sure this one is 99% new though, not a single problem aesthetically and it seems to be running froyo quite smoothly. It basically feels like a brand new phone (which according to Sprint Reps, there's an 80% chance of getting a new replacement and 20% chance of getting a used replacement). I'm thinking I'm in the 80% range
Very happy thus far... just my touch screen is a little quirky right now b/c I installed a clear screen protector and believe some of the moisture is interfering with touches... which has been getting better as the hours go on. So that's' good!
Thanks guys on the info.... It's just fine for getting me through until Sept. 15th so I can upgrade meself on the EVO!!!!
We shall see if it holds up until then
Take ya'lls and thanks for all the replies

You should get the epic instead. Lol
(IMHO)
Sent from my HERO200 using XDA App