just found these stands online and they look really nice. the h1 looks like it might work better, because on the h2 the "reverse chin" may get in the way. check them out. let me know how you like it if you get one.
http://www.luxa2store.com/products/mobileholder/h1/LH0001.htm
http://www.luxa2store.com/products/mobileholder/h2/LH0005.htm
The H1 is good but you have to do more to put it in the dock and more to take it out. Also the two top grippers on the H1 hit the power and volume buttons.
I think the H2 is better because all you have to do is press the phone against it and it stays stuck pretty good on the dock. It will collect dust and that will make it less sticky but just use a lint roller or wipe it with a wet cloth and it is back to normal. It is crazy how hard it sticks to the dock but when you touch it does not feel sticky at all. You are right about the lip on the bottom of the phone, if you want to use this dock you have to stick only the part of the phone that is above the lip.
I own both so I will try to take pictures of the phone in both docks today. You can get the H2 a little cheaper from Amazom.com http://www.amazon.com/Thermaltake-Aluminum-Blackberry-Similar-Devices/dp/B003KGBD0W/ref=sr_1_1?ie=UTF8&s=electronics&qid=1293023909&sr=8-1
Thanks, man! yeah pics would be great.
Here you go pictures of the Luxa2 H1 and H2.
sweet man, thanks! i will be buying the h2 then.
Related
These things look like they were made for the fingerprint magnet that is the NookColor lol
AndroidSwag used to have them, but I dont see them available anymore, so heres a place on eBay that does have them.
http://stev.ca/ev86NJ
So this would hook onto the otherwise useless little gap in the bottom left of the NC? How does this thing work? You just get one cleaner? Is it washable? how long does it last before it needs replacement or gets too dirty to do any good?
Just wondering, if any of you have personal experience with this thing. It would certainly be lovely if I didn't have to carry around eyeglass wipes.
Looks like the lanyard would be too short to cover the NC.
bugeyed1 said:
Looks like the lanyard would be too short to cover the NC.
Click to expand...
Click to collapse
Got a few of those. The back of the android is the felt cleaning part. It's about 5cm wide actually.
The lanyard is elastic so that you can reach (just about) the whole screen by stretching it (to the max).
It does a good job, not sure how long it will last...
Hi all,
I have recently switched to the Streak from owning all models of the iphone, and have not looked back. Such an awesome device, and android is great. Anyways, I had owned a case for my 3gs and Iphone 4 called the Mogotalk xd. It is a bluetooth/case/charger that keeps an extremely thin and very good bluetooth on the back of your phone. I have missed it very much, especially since the streak is huge and could really benefit from one of these...The product is very smart, and very thin...but this isn't a review, so you can check it out their site, which I can't link yet...just google or youtube it...
I contact ID8 support to ask if they would be making these cases for other devices, and they replied back that they would not. So, I decided to mod mine for my streak, and post it here in case anyone else wants to do the same. It came out very well I think, and was very easy...extremely useful...
I started by removing the felt lining (just peeled out), then, after messing around a bit, decided to just take an exacto knife to the rubber for the sides of the iphone. I cut right along the back of the case, so as to have a close fit. Pics attached ( I also cannot link pictures yet :-C)
I have 2 battery covers, so I then attached it with double sided tape (temporary, as I am looking for some way incorporate a kickstand next). I lined up the top of the case with the top of the battery cover. It still slides on fine. If someone wanted to, they could probably dremel the top of the case to fit perfectly on the battery cover, as the camera hole unfortunately is horizontal...and there are no electronics on the top half (bottom has charging port) The only thing you really lose is a few millimeters of thickness...but this thing is thin (still fits tightly in the car dock from dell) And now I have bluetooth that charges on my phone and is always with me. Really easy to do, and definitely worth it if you like talking on your phone, as this can be difficult with the streak. Let me know if you have any questions...you can pick this up on amazon or other sites for around 40-45 dollars..its worth it..
One thing to be careful of there is the battery compartment door. There's a power switch inside the Streak that's activated by a pin on the door and if the door moves your Streak will power down. This is a known problem with nothing on the door so I don't know how yours will behave with the extra weight/bulk hanging off it. I know good comfortable earpieces are hard to find so maybe you could incorporate the BT holder into another case instead of attaching it directly to the streak?
I thought about that, and it would be very easy for someone who wanted a case...however, I do not...The Case/bluetooth is extremely light, and for some reason, the battery cover now fits much more tightly in place..its not going anywhere...It would be really easy to just cut out out the back of a case, especially a silicone one, to fit...or to cut the top half as I said before and fit it into a hard case...
Last night I got inspired (by the Netflix app ) to make a functional and nice looking stand. But instead of jumping in blindly with plexiglass or something I built a prototype out of cardboard.
I was thinking of making the final version a bit smaller so it fits nicer when vertical and maybe making a notch in it so the home button is accessible. Something I can't figure out how to fix is that the speaker is inside the stand when vertical. But other than that I'm really happy how this turned out and can't wait to make a final version.
Attached are some pictures of it holding the Nook horizontal and vertical. Any comments, ideas or questions would be appreciated. Thank you.
Not bad though if you are worried about the speaker it would be realy easy to rigup a pair of speakers with a 1/8" stereo jack on your final build
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
michaelg1030 said:
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
Click to expand...
Click to collapse
Ah phooey! I see the benefit of DIY. True, sometimes there are cheaper solutions out there. But this user's solution gave "me" many ideas for other devices, my wife's iPad, my Evo, Books! I like the ingenuity involved in the OP's solution. I'm going to make something like this out of plexiglass--the OP's idea. 1 sheet of pl (home depot), my jigsaw, some cement, buff the edges, felt the edges to protect the nook, rubber little feet (Rite Aid), listen to jazz while I'm making it and have a blast! $20. It's going to look a lot better than a little cheap rack holding holding up a nook. Nice going!
I agree, sometimes it's about the journey, not the destination.
michaelg1030 said:
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
Click to expand...
Click to collapse
I have one of these and, while it's great for my XOOM, it doesn't really fit the NC very well. It's OK for landscape but if you want your NC to stand in portrait while charging you have to put the stand on a book or the edge of a table to allow space for the cable. Actually I found this thread because I was looking for a better stand.
I definitely see the advantages of DIY to satisfy your own requirements. Good luck!
I use this case stand since I got my Nook Color in January. I see that now Amazon for fulfils the orders for it now. I had to wait two weeks back then but it was worth it. No excuses not to get it now.
http://www.amazon.com/rooCASE-Leath...3?s=electronics&ie=UTF8&qid=1306015551&sr=1-3
Get a good Bluetooth keyboard I actually bought the Apple one from Amazon and you're in heaven.
Hey everyone,
I just wanted to post some pics of a stand that I put together. At first I bought one from BoxWave that they had up labeled as a Bamboo NOOKcolor stand.
http://www.boxwave.com/nookcolor-cradles-and-mounts/bamboo-nookcolor-stand/bwpdd/tpt-zfkf
Since I purchased it, they have changed the image on there website, though. Originally it was pretty misleading on the dimensions of the stand. I paid $30 for this thing and really it's only meant for a cellphone. It's absolutely way too small to hold up the NOOKcolor without tipping over.
Anyway, I liked the design of it so I went out and bought a bamboo cutting board from Walmart for $20 and cut it up into a bunch of pieces. I made myself a cardboard template based on that smaller stand I originally bought. I stacked all the pieces and then glued them together. I don't have a band saw so I found this really nice guy who has a shop over at Etsy who agreed to cut it out for me. He really did an awesome job. The link to his shop is here
http://www.etsy.com/people/irishmanswoodworks
in case anyone wants him to make one for you.
After I got it back from being cut out I sanded it up a bit more, put several coats of Tung oil and glued on a piece of felt. I think it came out really nice in the end. I attached some pics, so let me know what you guys think
That looks Amazingly Simple to do.
That is really quite snazzy!
I love it! Great work!
The only wood I'm good at working is ......
LOL tooo easy.
It does look beautiful. Does he use other exotic woods and stains?
I supplied the glued up bamboo board for him to cut, but I'm sure he can make it out of whatever you would want.
What a sweet stand. It looks really nice.
This is exactly what I'm looking for! I use XBMC in my living room and my Nook color is my remote. Thing is it runs out of juice all the time since I keep it on 24/7 and its a pain to charge. I'd like to see you drill a small square hold in the center of the bamboo where it can "dock" and run it out the back USB. Then we can run the usb to the AC outlet/USB Charger and have a Charging Dock!
Thats pretty awsome
Great work!
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Nice review! The case looks better than I had imagined.
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
regalpimpin said:
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Click to expand...
Click to collapse
Yes, I have an XtremeGuard body protector on it and it doesn't get in the way. I've taken it out of the case a few times and the protector's not bunching up. The protector's been on the Nex7 for over a week, so it's cured pretty well. I wouldn't try it on a fresh protector install. I'd give it about a week so that it sets right before putting it in a case like this.
Prey521 said:
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Click to expand...
Click to collapse
Picture #3, how did you get traffic webcam as widget? Seems useful.
taC nayN said:
Picture #3, how did you get traffic webcam as widget? Seems useful.
Click to expand...
Click to collapse
Ah, that's not a traffic cam widget....that my News360 App widget and the headline was for an overturned truck on a highway near my house lol
LovelyLush said:
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
Click to expand...
Click to collapse
I'm OK with the black case.....never been a fan of colorful cases. If I had to pick 1 other color, it would probably be like a dark blue.....nothing girly LOL
Nce review ty, I like the case seems decent for protection...even tho a tad thick. I think I well get this one even so based on the review plus I like the look.
Nice right up. Off subject what ROM are you running?
superman.namrepus said:
Nice right up. Off subject what ROM are you running?
Click to expand...
Click to collapse
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Prey521 said:
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Click to expand...
Click to collapse
Haha, that was going to be my question
Metalor696 said:
Haha, that was going to be my question
Click to expand...
Click to collapse
I have switched in the last few weeks to the Paranoid Android ROM with the Trinity Kernel. It runs great.
Thought about this case as well, but went with the official travel case.
Bought this case because of your review. It's exactly what I was looking for. Thanks.
Sent from my Google Nexus 7 using Tapatalk 2
I have a similar one bought off ebay. I'm happy with it. The only downside of that case is the circular bit at the back where it rotates.It can potentially scratch the back of the Nexus 7 so I have put a clear protective plastic on the back of the N7.